GraphicsPathIterator.NextPathType(Byte, Int32, Int32) 메서드

정의

형식이 모두 같은 데이터 지점의 다음 그룹에 대한 시작 인덱스와 끝 인덱스를 가져옵니다.Gets the starting index and the ending index of the next group of data points that all have the same type.

public:
 int NextPathType([Runtime::InteropServices::Out] System::Byte % pathType, [Runtime::InteropServices::Out] int % startIndex, [Runtime::InteropServices::Out] int % endIndex);
public int NextPathType (out byte pathType, out int startIndex, out int endIndex);
member this.NextPathType : byte * int * int -> int
Public Function NextPathType (ByRef pathType As Byte, ByRef startIndex As Integer, ByRef endIndex As Integer) As Integer

매개 변수

pathType
Byte

[out] 그룹 내 모든 점이 공유하는 점 종류를 받습니다.[out] Receives the point type shared by all points in the group. 가능한 종류는 PathPointType 열거형에서 검색할 수 있습니다.Possible types can be retrieved from the PathPointType enumeration.

startIndex
Int32

[out] 점 그룹의 시작 인덱스를 받습니다.[out] Receives the starting index of the group of points.

endIndex
Int32

[out] 점 그룹의 끝 인덱스를 받습니다.[out] Receives the ending index of the group of points.

반환

이 메서드는 그룹에 있는 데이터 지점 수를 반환합니다.This method returns the number of data points in the group. 경로에 그룹이 더 이상 없으면 이 메서드는 0을 반환합니다.If there are no more groups in the path, this method returns 0.

예제

다음 예제는 Windows Forms에서 사용 하도록 설계 되었으며 필요 PaintEventArgs e, OnPaint 이벤트 개체입니다.The following example is designed for use with Windows Forms, and it requires PaintEventArgse, an OnPaint event object. 이 코드에서는 다음 작업을 수행합니다.The code performs the following actions:

  • GraphicsPath 개체를 만듭니다.Creates a GraphicsPath object.

  • 세 선, 사각형 및 타원을 추가합니다.Adds three lines, a rectangle, and an ellipse.

  • 화면의 왼쪽에 모든 점 값을 나열 합니다.Lists the values of all the points to the left side of the screen.

  • 만듭니다는 GraphicsPathIterator 다시 수행 하 고 있습니다.Creates a GraphicsPathIterator and rewinds it.

  • for 루프를 사용 하 여 요소를 반복 합니다 NextPathTypeNextPathType 메서드.In a for loop, iterates through the points using the NextPathType and NextPathType methods.

  • 하위 경로 수, 점, 개수 및 화면 왼쪽에서 오른쪽으로 경로 지점 유형을 나열 하는 반복 호출에서 반환 되는 값을 사용 합니다.Uses the values returned from the iterative calls to list the subpath number, the number of points in it, and the type of the path points to the right side of the screen.

  • 화면에 점의 총 개수에 대 한 값을 표시합니다.Displays the value for the total number of points to the screen.

ListPathPoints 대부분을 구분 하는 도우미 함수 (모두는 아님)의 그래픽 경로 코드에서 코드를 표시 합니다.Note that ListPathPoints is a helper function that separates most (not all) of the display code from the graphics path code.

public:
   void NextPathTypeExample( PaintEventArgs^ e )
   {
      // Create the GraphicsPath.
      GraphicsPath^ myPath = gcnew GraphicsPath;
      array<Point>^ myPoints = {Point(20,20),Point(120,120),Point(20,120),Point(20,20)};
      Rectangle myRect = Rectangle(120,120,100,100);

      // Add 3 lines, a rectangle, and an ellipse.
      myPath->AddLines( myPoints );
      myPath->AddRectangle( myRect );
      myPath->AddEllipse( 220, 220, 100, 100 );

      // List all of the path points to the screen.
      ListPathPoints( e, myPath, nullptr, 20, 1 );

      // Create a GraphicsPathIterator.
      GraphicsPathIterator^ myPathIterator = gcnew GraphicsPathIterator( myPath );

      // Rewind the Iterator.
      myPathIterator->Rewind();

      // Iterate the subpaths and types, and list the results to
      // the screen.
            int i;
      int j = 20;
      int mySubPaths;
      int subPathStartIndex;
      int subPathEndIndex;
      Boolean IsClosed;
      Byte subPathPointType;
      int pointTypeStartIndex;
      int pointTypeEndIndex;
      int numPointsFound;
      System::Drawing::Font^ myFont = gcnew System::Drawing::Font( "Arial",8 );
      SolidBrush^ myBrush = gcnew SolidBrush( Color::Black );
      j = 20;
      for ( i = 0; i < 3; i++ )
      {
         mySubPaths = myPathIterator->NextSubpath( subPathStartIndex, subPathEndIndex, IsClosed );
         numPointsFound = myPathIterator->NextPathType( subPathPointType, pointTypeStartIndex, pointTypeEndIndex );
         e->Graphics->DrawString( String::Format( "SubPath: {0}  Points Found: {1}  Type of Points: {2}", i,
               numPointsFound, subPathPointType ), myFont, myBrush, 200.0f, (float)j );
         j += 20;
      }

      // List the total number of path points to the screen.
      ListPathPoints( e, myPath, myPathIterator, 200, 2 );
   }

   //-------------------------------------------------------
   //This function is a helper function used by
   // NextPathTypeExample.
   //-------------------------------------------------------
   void ListPathPoints( PaintEventArgs^ e, GraphicsPath^ myPath, GraphicsPathIterator^ myPathIterator, int xOffset, int listType )
   {
      // Get the total number of points for the path,
      // and the arrays of the points and types.
      int myPathPointCount = myPath->PointCount;
      array<PointF>^myPathPoints = myPath->PathPoints;
      array<Byte>^myPathTypes = myPath->PathTypes;

      // Set up variables for drawing the points to the screen.
      int i;
      float j = 20;
      System::Drawing::Font^ myFont = gcnew System::Drawing::Font( "Arial",8 );
      SolidBrush^ myBrush = gcnew SolidBrush( Color::Black );
      if ( listType == 1 )
      {
         // Draw the set of path points and types to the screen.
         for ( i = 0; i < myPathPointCount; i++ )
         {
            e->Graphics->DrawString( myPathPoints[ i ].X + ", " + myPathPoints[ i ].Y + ", " + myPathTypes[ i ],
                  myFont, myBrush, (float)xOffset, (float)j );
            j += 20;
         }
      }
      else
      if ( listType == 2 )
      {
         // Draw the total number of points to the screen.
         int myPathTotalPoints = myPathIterator->Count;
         e->Graphics->DrawString( String::Format( "Total Points = {0}", myPathTotalPoints ), myFont, myBrush, (float)xOffset, 100.0f );
      }
      else
      {
         e->Graphics->DrawString( "Wrong or no list type argument.", myFont, myBrush, (float)xOffset, 200.0f );
      }
   }
public void NextPathTypeExample(PaintEventArgs e)
{
             
    // Create the GraphicsPath.
    GraphicsPath myPath = new GraphicsPath();

    Point[] myPoints = {new Point(20, 20), new Point(120, 120), 
         new Point(20, 120),new Point(20, 20) }; 
    Rectangle myRect = new Rectangle(120, 120, 100, 100);
             
    // Add 3 lines, a rectangle, and an ellipse.
    myPath.AddLines(myPoints);
    myPath.AddRectangle(myRect);
    myPath.AddEllipse(220, 220, 100, 100);
             
    // List all of the path points to the screen.
    ListPathPoints(e, myPath, null, 20, 1);
             
    // Create a GraphicsPathIterator.
    GraphicsPathIterator myPathIterator = new
        GraphicsPathIterator(myPath);
             
    // Rewind the Iterator.
    myPathIterator.Rewind();
             
    // Iterate the subpaths and types, and list the results to
             
    // the screen.
    int i, j = 20;
    int mySubPaths, subPathStartIndex, subPathEndIndex;
    Boolean IsClosed;
    byte subPathPointType;
    int pointTypeStartIndex,  pointTypeEndIndex, numPointsFound;
    Font myFont = new Font("Arial", 8);
    SolidBrush myBrush = new SolidBrush(Color.Black);
    j = 20;
    for(i = 0;i < 3; i++)
    {
        mySubPaths = myPathIterator.NextSubpath(
            out subPathStartIndex,
            out subPathEndIndex,
            out IsClosed);
        numPointsFound = myPathIterator.NextPathType(
            out subPathPointType,
            out pointTypeStartIndex,
            out pointTypeEndIndex);
        e.Graphics.DrawString(
            "SubPath: " + i +
            "  Points Found: " + numPointsFound.ToString() +
            "  Type of Points: " + subPathPointType.ToString(),
            myFont,
            myBrush,
            200,
            j);
        j+=20;
    }
             
    // List the total number of path points to the screen.
    ListPathPoints(e, myPath, myPathIterator, 200, 2);
}
             
//-------------------------------------------------------
//This function is a helper function used by
// NextPathTypeExample.
//-------------------------------------------------------
public void ListPathPoints(
    PaintEventArgs e,
    GraphicsPath myPath,
    GraphicsPathIterator myPathIterator,
    int xOffset,
    int listType)
{
             
    // Get the total number of points for the path,
    // and the arrays of the points and types.
    int myPathPointCount = myPath.PointCount;
    PointF[] myPathPoints = myPath.PathPoints;
    byte[] myPathTypes = myPath.PathTypes;
             
    // Set up variables for drawing the points to the screen.
    int i;
    float j = 20;
    Font myFont = new Font("Arial", 8);
    SolidBrush myBrush = new SolidBrush(Color.Black);
    if (listType == 1) 
        // List all the path points to the screen.
    {
             
        // Draw the set of path points and types to the screen.
        for(i=0; i<myPathPointCount; i++)
        {
            e.Graphics.DrawString(myPathPoints[i].X.ToString()+
                ", " + myPathPoints[i].Y.ToString() + ", " +
                myPathTypes[i].ToString(),
                myFont,
                myBrush,
                xOffset,
                j);
            j+=20;
        }
    }
    else if (listType == 2) 
        // Display the total number of path points.
    {
             
        // Draw the total number of points to the screen.
        int myPathTotalPoints = myPathIterator.Count;
        e.Graphics.DrawString("Total Points = " +
            myPathTotalPoints.ToString(),
            myFont,
            myBrush,
            xOffset,
            100);
    }
    else
    {
        e.Graphics.DrawString("Wrong or no list type argument.",
            myFont, myBrush, xOffset, 200);
    }
}
Public Sub NextPathTypeExample(ByVal e As PaintEventArgs)

    ' Create the GraphicsPath.
    Dim myPath As New GraphicsPath
    Dim myPoints As Point() = {New Point(20, 20), _
    New Point(120, 120), New Point(20, 120), New Point(20, 20)}
    Dim myRect As New Rectangle(120, 120, 100, 100)

    ' Add 3 lines, a rectangle, and an ellipse.
    myPath.AddLines(myPoints)
    myPath.AddRectangle(myRect)
    myPath.AddEllipse(220, 220, 100, 100)

    ' List all of the path points to the screen.
    ListPathPointsHelper(e, myPath, Nothing, 20, 1)

    ' Create a GraphicsPathIterator.
    Dim myPathIterator As New GraphicsPathIterator(myPath)

    ' Rewind the Iterator.
    myPathIterator.Rewind()

    ' Iterate the subpaths and types, and list the results
    ' to the screen.
    Dim j As Integer = 20
    Dim i As Integer
    Dim mySubPaths, subPathStartIndex, subPathEndIndex As Integer
    Dim IsClosed As [Boolean]
    Dim subPathPointType As Byte
    Dim pointTypeStartIndex, pointTypeEndIndex, _
    numPointsFound As Integer
    Dim myFont As New Font("Arial", 8)
    Dim myBrush As New SolidBrush(Color.Black)
    j = 20
    For i = 0 To 2
        mySubPaths = myPathIterator.NextSubpath(subPathStartIndex, _
            subPathEndIndex, IsClosed)
        numPointsFound = myPathIterator.NextPathType(subPathPointType, _
            pointTypeStartIndex, pointTypeEndIndex)
        e.Graphics.DrawString("SubPath: " & i & "  Points Found: " & _
            numPointsFound.ToString() & "  Type of Points: " & _
        subPathPointType.ToString(), myFont, myBrush, 200, j)
        j += 20
    Next i

    ' List the total number of path points to the screen.
    ListPathPointsHelper(e, myPath, myPathIterator, 200, 2)
End Sub

' This is a helper function used by NextPathTypeExample.
Public Sub ListPathPointsHelper(ByVal e As PaintEventArgs, _
ByVal myPath As GraphicsPath, ByVal myPathIterator As GraphicsPathIterator, _
ByVal xOffset As Integer, ByVal listType As Integer)

    ' Get the total number of points for the path,
    ' and the arrays of the points and types.
    Dim myPathPointCount As Integer = myPath.PointCount
    Dim myPathPoints As PointF() = myPath.PathPoints
    Dim myPathTypes As Byte() = myPath.PathTypes

    ' Set up variables for drawing the points to the screen.
    Dim i As Integer
    Dim j As Single = 20
    Dim myFont As New Font("Arial", 8)
    Dim myBrush As New SolidBrush(Color.Black)
    If listType = 1 Then
        ' List all the path points to the screen.

        ' Draw the set of path points and types to the screen.
        For i = 0 To myPathPointCount - 1
            e.Graphics.DrawString(myPathPoints(i).X.ToString() + ", " + _
                myPathPoints(i).Y.ToString() + ", " + _
            myPathTypes(i).ToString(), myFont, myBrush, xOffset, j)
            j += 20
        Next i
    Else
        If listType = 2 Then
            ' Display the total number of path points.

            ' Draw the total number of points to the screen.
            Dim myPathTotalPoints As Integer = myPathIterator.Count
            e.Graphics.DrawString("Total Points = " + _
                myPathTotalPoints.ToString(), myFont, myBrush, xOffset, _
                100)
        Else
            e.Graphics.DrawString("Wrong or no list type argument.", _
                myFont, myBrush, xOffset, 200)
        End If
    End If
End Sub

적용 대상