Graphics.DrawPolygon Graphics.DrawPolygon Graphics.DrawPolygon Method

정의

Point 구조체의 배열에 의해 정의된 다각형을 그립니다.Draws a polygon defined by an array of Point structures.

오버로드

DrawPolygon(Pen, PointF[]) DrawPolygon(Pen, PointF[]) DrawPolygon(Pen, PointF[])

PointF 구조체의 배열에 의해 정의된 다각형을 그립니다.Draws a polygon defined by an array of PointF structures.

DrawPolygon(Pen, Point[]) DrawPolygon(Pen, Point[]) DrawPolygon(Pen, Point[])

Point 구조체의 배열에 의해 정의된 다각형을 그립니다.Draws a polygon defined by an array of Point structures.

DrawPolygon(Pen, PointF[]) DrawPolygon(Pen, PointF[]) DrawPolygon(Pen, PointF[])

PointF 구조체의 배열에 의해 정의된 다각형을 그립니다.Draws a polygon defined by an array of PointF structures.

public:
 void DrawPolygon(System::Drawing::Pen ^ pen, cli::array <System::Drawing::PointF> ^ points);
public void DrawPolygon (System.Drawing.Pen pen, System.Drawing.PointF[] points);
member this.DrawPolygon : System.Drawing.Pen * System.Drawing.PointF[] -> unit

매개 변수

pen
Pen Pen Pen

다각형의 색, 너비 및 스타일을 결정하는 Pen입니다.Pen that determines the color, width, and style of the polygon.

points
PointF[]

다각형의 꼭짓점을 나타내는 PointF 구조체의 배열입니다.Array of PointF structures that represent the vertices of the polygon.

예외

pennull입니다.pen is null.

또는-or- pointsnull입니다.points is null.

예제

다음 코드 예제는 Windows Forms에서 사용 하도록 설계 되었으며 필요 PaintEventArgs e의 매개 변수는 Paint 이벤트 처리기입니다.The following code example is designed for use with Windows Forms, and it requires PaintEventArgse, which is a parameter of the Paint event handler. 이 코드에서는 다음 작업을 수행합니다.The code performs the following actions:

  • Black 펜을 만듭니다.Creates a black pen.

  • 다각형의 꼭지점에 대 한 7 개 요소의 배열을 만듭니다.Creates an array of seven points for the vertices of the polygon.

  • 화면에 다각형을 그립니다.Draws the polygon to the screen.

public:
   void DrawPolygonPointF( PaintEventArgs^ e )
   {
      // Create pen.
      Pen^ blackPen = gcnew Pen( Color::Black,3.0f );

      // Create points that define polygon.
      PointF point1 = PointF(50.0F,50.0F);
      PointF point2 = PointF(100.0F,25.0F);
      PointF point3 = PointF(200.0F,5.0F);
      PointF point4 = PointF(250.0F,50.0F);
      PointF point5 = PointF(300.0F,100.0F);
      PointF point6 = PointF(350.0F,200.0F);
      PointF point7 = PointF(250.0F,250.0F);
      array<PointF>^ curvePoints = {point1,point2,point3,point4,point5,point6,point7};

      // Draw polygon curve to screen.
      e->Graphics->DrawPolygon( blackPen, curvePoints );
   }
public void DrawPolygonPointF(PaintEventArgs e)
{
             
    // Create pen.
    Pen blackPen = new Pen(Color.Black, 3);
             
    // Create points that define polygon.
    PointF point1 = new PointF(50.0F,  50.0F);
    PointF point2 = new PointF(100.0F,  25.0F);
    PointF point3 = new PointF(200.0F,   5.0F);
    PointF point4 = new PointF(250.0F,  50.0F);
    PointF point5 = new PointF(300.0F, 100.0F);
    PointF point6 = new PointF(350.0F, 200.0F);
    PointF point7 = new PointF(250.0F, 250.0F);
    PointF[] curvePoints =
             {
                 point1,
                 point2,
                 point3,
                 point4,
                 point5,
                 point6,
                 point7
             };
             
    // Draw polygon curve to screen.
    e.Graphics.DrawPolygon(blackPen, curvePoints);
}
Public Sub DrawPolygonPointF(ByVal e As PaintEventArgs)

    ' Create pen.
    Dim blackPen As New Pen(Color.Black, 3)

    ' Create points that define polygon.
    Dim point1 As New PointF(50.0F, 50.0F)
    Dim point2 As New PointF(100.0F, 25.0F)
    Dim point3 As New PointF(200.0F, 5.0F)
    Dim point4 As New PointF(250.0F, 50.0F)
    Dim point5 As New PointF(300.0F, 100.0F)
    Dim point6 As New PointF(350.0F, 200.0F)
    Dim point7 As New PointF(250.0F, 250.0F)
    Dim curvePoints As PointF() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Draw polygon curve to screen.
    e.Graphics.DrawPolygon(blackPen, curvePoints)
End Sub

설명

배열에서 두 연속 점 쌍 마다 다각형의 한 쪽을 지정합니다.Every pair of two consecutive points in the array specifies a side of the polygon. 또한 마지막 점과 배열 요소의 첫 번째 일치 하지 않는 경우 다각형의 마지막 쪽을 지정 합니다.In addition, if the last point and the first of the array point do not coincide, they specify the last side of the polygon.

DrawPolygon(Pen, Point[]) DrawPolygon(Pen, Point[]) DrawPolygon(Pen, Point[])

Point 구조체의 배열에 의해 정의된 다각형을 그립니다.Draws a polygon defined by an array of Point structures.

public:
 void DrawPolygon(System::Drawing::Pen ^ pen, cli::array <System::Drawing::Point> ^ points);
public void DrawPolygon (System.Drawing.Pen pen, System.Drawing.Point[] points);
member this.DrawPolygon : System.Drawing.Pen * System.Drawing.Point[] -> unit

매개 변수

pen
Pen Pen Pen

다각형의 색, 너비 및 스타일을 결정하는 Pen입니다.Pen that determines the color, width, and style of the polygon.

points
Point[]

다각형의 꼭짓점을 나타내는 Point 구조체의 배열입니다.Array of Point structures that represent the vertices of the polygon.

예외

예제

다음 코드 예제는 Windows Forms에서 사용 하도록 설계 되었으며 필요 PaintEventArgs e의 매개 변수는 Paint 이벤트 처리기입니다.The following code example is designed for use with Windows Forms, and it requires PaintEventArgse, which is a parameter of the Paint event handler. 이 코드에서는 다음 작업을 수행합니다.The code performs the following actions:

  • Black 펜을 만듭니다.Creates a black pen.

  • 다각형의 꼭지점에 대 한 7 개 요소의 배열을 만듭니다.Creates an array of seven points for the vertices of the polygon.

  • 화면에 다각형을 그립니다.Draws the polygon to the screen.

public:
   void DrawPolygonPoint( PaintEventArgs^ e )
   {
      // Create pen.
      Pen^ blackPen = gcnew Pen( Color::Black,3.0f );

      // Create points that define polygon.
      Point point1 = Point(50,50);
      Point point2 = Point(100,25);
      Point point3 = Point(200,5);
      Point point4 = Point(250,50);
      Point point5 = Point(300,100);
      Point point6 = Point(350,200);
      Point point7 = Point(250,250);
      array<Point>^ curvePoints = {point1,point2,point3,point4,point5,point6,point7};

      // Draw polygon to screen.
      e->Graphics->DrawPolygon( blackPen, curvePoints );
   }
public void DrawPolygonPoint(PaintEventArgs e)
{
             
    // Create pen.
    Pen blackPen = new Pen(Color.Black, 3);
             
    // Create points that define polygon.
    Point point1 = new Point(50,  50);
    Point point2 = new Point(100,  25);
    Point point3 = new Point(200,   5);
    Point point4 = new Point(250,  50);
    Point point5 = new Point(300, 100);
    Point point6 = new Point(350, 200);
    Point point7 = new Point(250, 250);
    Point[] curvePoints =
             {
                 point1,
                 point2,
                 point3,
                 point4,
                 point5,
                 point6,
                 point7
             };
             
    // Draw polygon to screen.
    e.Graphics.DrawPolygon(blackPen, curvePoints);
}
Public Sub DrawPolygonPoint(ByVal e As PaintEventArgs)

    ' Create pen.
    Dim blackPen As New Pen(Color.Black, 3)

    ' Create points that define polygon.
    Dim point1 As New Point(50, 50)
    Dim point2 As New Point(100, 25)
    Dim point3 As New Point(200, 5)
    Dim point4 As New Point(250, 50)
    Dim point5 As New Point(300, 100)
    Dim point6 As New Point(350, 200)
    Dim point7 As New Point(250, 250)
    Dim curvePoints As Point() = {point1, point2, point3, point4, _
    point5, point6, point7}

    ' Draw polygon to screen.
    e.Graphics.DrawPolygon(blackPen, curvePoints)
End Sub

설명

배열에서 두 연속 점 쌍 마다 다각형의 한 쪽을 지정합니다.Every pair of two consecutive points in the array specifies a side of the polygon. 또한 배열의 첫 번째 지점과 마지막 지점 교차 하지 않을 경우 다각형의 마지막 쪽을 지정 합니다.In addition, if the last point and the first point of the array do not coincide, they specify the last side of the polygon.

적용 대상