Single.NaN 필드

정의

Not-a-Number(NaN)를 나타냅니다.Represents not a number (NaN). 이 필드는 상수입니다.This field is constant.

public: float NaN = NaN;
public const float NaN = NaN;
val mutable NaN : single
Public Const NaN As Single  = NaN

필드 값

예제

다음 예제에서는 NaN 상수를 보여 줍니다.The following example demonstrates the NaN constant.

Single zero = 0;

// This condition will return false.
if ( (0 / zero) == Single::NaN )
{
   Console::WriteLine( "0 / 0 can be tested with Single::NaN." );
}
else
{
   Console::WriteLine( "0 / 0 cannot be tested with Single::NaN; use Single::IsNan() instead." );
}
Single zero = 0;

// This condition will return false.
if ((0 / zero) == Single.NaN)
{
    Console.WriteLine("0 / 0 can be tested with Single.NaN.");
}
else
{
    Console.WriteLine("0 / 0 cannot be tested with Single.NaN; use Single.IsNan() instead.");
}
Dim zero As Single = 0

' This condition will return false.
If (0 / zero) = Single.NaN Then
    Console.WriteLine("0 / 0 can be tested with Single.NaN.")
Else
    Console.WriteLine("0 / 0 cannot be tested with Single.NaN; use Single.IsNan() instead.")
End If

설명

메서드 또는 연산자는 작업 결과가 정의 되지 않은 경우 NaN을 반환 합니다.A method or operator returns NaN when the result of an operation is undefined. 예를 들어 0으로 나눈 결과는 다음 예제와 같이 NaN됩니다.For example, the result of dividing zero by zero is NaN, as the following example shows. (0이 아닌 숫자를 0으로 나누면 제수로의 부호에 따라 PositiveInfinity 또는 NegativeInfinity을 반환 합니다.)(But note that dividing a non-zero number by zero returns either PositiveInfinity or NegativeInfinity, depending on the sign of the divisor.)

float zero = 0.0f;
Console.WriteLine("{0} / {1} = {2}", zero, zero, zero/zero);
// The example displays the following output:
//         0 / 0 = NaN      
Dim zero As Single = 0
Console.WriteLine("{0} / {1} = {2}", zero, zero, zero/zero)
' The example displays the following output:
'         0 / 0 = NaN      

또한 다음 예제와 같이 NaN 값 이나 NaN 값에 대 한 작업을 사용 하 여 메서드를 호출 하면 NaN이 반환 됩니다.In addition, a method call with a NaN value or an operation on a NaN value returns NaN, as the following example shows.

float nan1 = Single.NaN;

Console.WriteLine("{0} + {1} = {2}", 3, nan1, 3 + nan1);
Console.WriteLine("Abs({0}) = {1}", nan1, Math.Abs(nan1));
// The example displays the following output:
//       3 + NaN = NaN
//       Abs(NaN) = NaN
Dim nan1 As Single = Single.NaN

Console.WriteLine("{0} + {1} = {2}", 3, nan1, 3 + nan1)
Console.WriteLine("Abs({0}) = {1}", nan1, Math.Abs(nan1))
' The example displays the following output:
'       3 + NaN = NaN
'       Abs(NaN) = NaN

IsNaN 메서드를 사용 하 여 값이 숫자가 아닌 지 여부를 확인 합니다.Use the IsNaN method to determine whether a value is not a number. 일반적으로 Single 연산자는 Single.NaN 다른 Single 값과 비교 하는 데 사용할 수 없습니다 (예: EqualsCompareTo).In general, Single operators cannot be used to compare Single.NaN with other Single values, although comparison methods (such as Equals and CompareTo) can. 다음 예에서는 Single 비교 연산자와 메서드 간의 동작 차이를 보여 줍니다.The following example illustrates the difference in behavior between Single comparison operators and methods.

using System;

public class Example
{
   public static void Main()
   {
      Console.WriteLine("NaN == NaN: {0}", Single.NaN == Single.NaN); 
      Console.WriteLine("NaN != NaN: {0}", Single.NaN != Single.NaN); 
      Console.WriteLine("NaN.Equals(NaN): {0}", Single.NaN.Equals(Single.NaN)); 
      Console.WriteLine("! NaN.Equals(NaN): {0}", ! Single.NaN.Equals(Single.NaN)); 
      Console.WriteLine("IsNaN: {0}", Double.IsNaN(Double.NaN));
      
      Console.WriteLine("\nNaN > NaN: {0}", Single.NaN > Single.NaN); 
      Console.WriteLine("NaN >= NaN: {0}", Single.NaN >= Single.NaN); 
      Console.WriteLine("NaN < NaN: {0}", Single.NaN < Single.NaN);
      Console.WriteLine("NaN < 100.0: {0}", Single.NaN < 100.0f); 
      Console.WriteLine("NaN <= 100.0: {0}", Single.NaN <= 100.0f); 
      Console.WriteLine("NaN >= 100.0: {0}", Single.NaN > 100.0f);
      Console.WriteLine("NaN.CompareTo(NaN): {0}", Single.NaN.CompareTo(Single.NaN)); 
      Console.WriteLine("NaN.CompareTo(100.0): {0}", Single.NaN.CompareTo(100.0f)); 
      Console.WriteLine("(100.0).CompareTo(Single.NaN): {0}", (100.0f).CompareTo(Single.NaN)); 
   }
}
// The example displays the following output:
//       NaN == NaN: False
//       NaN != NaN: True
//       NaN.Equals(NaN): True
//       ! NaN.Equals(NaN): False
//       IsNaN: True
//
//       NaN > NaN: False
//       NaN >= NaN: False
//       NaN < NaN: False
//       NaN < 100.0: False
//       NaN <= 100.0: False
//       NaN >= 100.0: False
//       NaN.CompareTo(NaN): 0
//       NaN.CompareTo(100.0): -1
//       (100.0).CompareTo(Single.NaN): 1
Module Example
   Public Sub Main()
      Console.WriteLine("NaN = NaN: {0}", Single.NaN = Single.NaN) 
      Console.WriteLine("NaN <> NaN: {0}", Single.NaN <> Single.NaN) 
      Console.WriteLine("NaN.Equals(NaN): {0}", Single.NaN.Equals(Single.NaN)) 
      Console.WriteLine("Not NaN.Equals(NaN): {0}", Not Single.NaN.Equals(Single.NaN)) 
      Console.WriteLine("IsNaN: {0}", Double.IsNaN(Double.NaN))
      Console.WriteLine()
      Console.WriteLine("NaN > NaN: {0}", Single.NaN > 100.0f) 
      Console.WriteLine("NaN >= NaN: {0}", Single.NaN >= 100.0f) 
      Console.WriteLine("NaN < NaN: {0}", Single.NaN < Single.NaN)
      Console.WriteLine("NaN < 100.0: {0}", Single.NaN < 100.0f) 
      Console.WriteLine("NaN <= 100.0: {0}", Single.NaN <= 100.0f) 
      Console.WriteLine("NaN >= 100.0: {0}", Single.NaN > 100.0f)
      Console.WriteLine("NaN.CompareTo(NaN): {0}", Single.NaN.CompareTo(Single.Nan)) 
      Console.WriteLine("NaN.CompareTo(100.0): {0}", Single.NaN.CompareTo(100.0f)) 
      Console.WriteLine("(100.0).CompareTo(Single.NaN): {0}", (100.0f).CompareTo(Single.NaN)) 
   End Sub
End Module
' The example displays the following output:
'       NaN == NaN: False
'       NaN != NaN: True
'       NaN.Equals(NaN): True
'       ! NaN.Equals(NaN): False
'       IsNaN: True
'
'       NaN > NaN: False
'       NaN >= NaN: False
'       NaN < NaN: False
'       NaN < 100.0: False
'       NaN <= 100.0: False
'       NaN >= 100.0: False
'       NaN.CompareTo(NaN): 0
'       NaN.CompareTo(100.0): -1
'       (100.0).CompareTo(Single.NaN): 1

적용 대상

추가 정보