QR 코드 추적(C# 및 C++)

여기서 시작하기 전에 개요, 디바이스 지원 테이블 및 모범 사례를 포함하는 QR 코드 추적 개요 문서를 살펴보는 것이 좋습니다.

QR 패키지 가져오기

QR 코드 검색을 위한 NuGet 패키지는 여기에서 다운로드할 수 있습니다.

QR 코드 검색

웹캠 기능 추가

QR 코드를 검색하려면 매니페스트에 기능을 webcam 추가해야 합니다. 사용자 환경에서 검색된 코드 내의 데이터에 중요한 정보가 포함될 수 있으므로 이 기능이 필요합니다.

다음을 호출 QRCodeWatcher.RequestAccessAsync()하여 권한을 요청할 수 있습니다.

C #:

await QRCodeWatcher.RequestAccessAsync();

C + +:

co_await QRCodeWatcher.RequestAccessAsync();

QRCodeWatcher 개체를 생성하기 전에 권한을 요청해야 합니다.

QR 코드 검색에는 webcam 기능이 필요하지만 디바이스의 추적 카메라를 사용하여 검색이 수행됩니다. 이렇게 하면 디바이스의 사진/비디오(PV) 카메라를 사용한 감지에 비해 더 넓은 감지 FOV 및 더 나은 배터리 수명을 제공합니다.

C++에서 QR 코드 검색

using namespace winrt::Windows::Foundation;
using namespace winrt::Microsoft::MixedReality::QR;

class QRListHelper
{
public:
    QRListHelper(MyApplication& app) :
        m_app(app)
    {}

    IAsyncAction SetUpQRCodes()
    {
        if (QRCodeWatcher::IsSupported())
        {
            QRCodeWatcherAccessStatus status = co_await QRCodeWatcher::RequestAccessAsync();
            InitializeQR(status);
        }
    }

private:
    void OnAddedQRCode(const IInspectable&, const QRCodeAddedEventArgs& args)
    {
        m_app.OnAddedQRCode(args);
    }

    void OnUpdatedQRCode(const IInspectable&, const QRCodeUpdatedEventArgs& args)
    {
        m_app.OnUpdatedQRCode(args);
    }

    void OnEnumerationComplete(const IInspectable&, const IInspectable&)
    {
        m_app.OnEnumerationComplete();
    }

    MyApplication& m_app;
    QRCodeWatcher m_qrWatcher{ nullptr };

    void InitializeQR(QRCodeWatcherAccessStatus status)
    {
        if (status == QRCodeWatcherAccessStatus::Allowed)
        {
            m_qrWatcher = QRCodeWatcher();
            m_qrWatcher.Added({ this, &QRListHelper::OnAddedQRCode });
            m_qrWatcher.Updated({ this, &QRListHelper::OnUpdatedQRCode });
            m_qrWatcher.EnumerationCompleted({ this, &QRListHelper::OnEnumerationComplete });
            m_qrWatcher.Start();
        }
        else
        {
            // Permission denied by system or user
            // Handle the failures
        }
    }
};

QR 코드의 좌표계 가져오기

검색된 각 QR 코드는 왼쪽 위에 있는 빠른 검색 사각형의 왼쪽 위 모서리에 있는 QR 코드와 정렬된 공간 좌표계 를 노출합니다.

QR code coordinate system

QR SDK를 직접 사용하는 경우 Z축이 용지를 가리키고 있습니다(표시되지 않음).

QR 코드의 SpatialCoordinateSystem은 표시된 대로 정렬됩니다. SpatialGraphInteropPreview::CreateCoordinateSystemForNode를 호출하고 코드의 SpatialGraphNodeId를 전달하여 플랫폼에서 좌표계를 가져올 수 있습니다.

아래 C++ 코드는 사각형을 만들고 QR 코드의 좌표계를 사용하여 배치하는 방법을 보여줍니다.

// Creates a 2D rectangle in the x-y plane, with the specified properties.
std::vector<float3> MyApplication::CreateRectangle(float width, float height)
{
    std::vector<float3> vertices(4);

    vertices[0] = { 0, 0, 0 };
    vertices[1] = { width, 0, 0 };
    vertices[2] = { width, height, 0 };
    vertices[3] = { 0, height, 0 };

    return vertices;
}

물리적 크기를 사용하여 QR 사각형을 만들 수 있습니다.

std::vector<float3> qrVertices = CreateRectangle(code.PhysicalSideLength(), code.PhysicalSideLength()); 

좌표계를 사용하여 QR 코드를 그리거나 홀로그램을 위치에 연결할 수 있습니다.

using namespace winrt::Windows::Perception::Spatial;
using namespace winrt::Windows::Perception::Spatial::Preview;
SpatialCoordinateSystem qrCoordinateSystem = SpatialGraphInteropPreview::CreateCoordinateSystemForNode(code.SpatialGraphNodeId());

QRCodeAddedHandler는 다음과 같이 표시될 수 있습니다.

void MyApplication::OnAddedQRCode(const QRCodeAddedEventArgs& args)
{
    QRCode code = args.Code();
    std::vector<float3> qrVertices = CreateRectangle(code.PhysicalSideLength(), code.PhysicalSideLength());
    std::vector<unsigned short> qrCodeIndices = TriangulatePoints(qrVertices);
    XMFLOAT3 qrAreaColor = XMFLOAT3(DirectX::Colors::Aqua);

    SpatialCoordinateSystem qrCoordinateSystem = SpatialGraphInteropPreview::CreateCoordinateSystemForNode(code.SpatialGraphNodeId());
    std::shared_ptr<SceneObject> m_qrShape =
        std::make_shared<SceneObject>(
            m_deviceResources,
            qrVertices,
            qrCodeIndices,
            qrAreaColor,
            qrCoordinateSystem);

    m_sceneController->AddSceneObject(m_qrShape);
}

QR 코드 추적 API 참조

namespace Microsoft.MixedReality.QR
{
    /// <summary>
    /// Represents a detected QR code.
    /// </remarks>
    public class QRCode
    {
        /// <summary>
        /// Unique id that identifies this QR code for this session.
        /// </summary>
        public Guid Id { get; }

        /// <summary>
        /// Spatial graph node id for this QR code to create a coordinate system.
        /// </summary>
        public Guid SpatialGraphNodeId { get; }

        /// <summary>
        /// Version of this QR code. Version 1-40 are regular QR codes and M1 to M4 are Micro QR code formats 1-4.
        /// </summary>
        public QRVersion Version { get; }

        /// <summary>
        /// Physical width and height of this QR code in meters.
        /// </summary>
        public float PhysicalSideLength { get; }

        /// <summary>
        /// Decoded QR code data.
        /// </summary>
        public String Data { get; }

        /// <summary>
        /// Size of the RawData of this QR code.
        /// </summary>
        public UInt32 RawDataSize { get; }

        /// <summary>
        /// Gets the error-corrected raw data bytes.
        /// Used when the platform is unable to decode the code's format,
        /// allowing your app to decode as needed.
        /// </summary>
        public void GetRawData(byte[] buffer);

        /// <summary>
        /// The last detected time in 100ns QPC ticks.
        /// </summary>
        public System.TimeSpan SystemRelativeLastDetectedTime { get; }

        /// <summary>
        /// The last detected time.
        /// </summary>
        public System.DateTimeOffset LastDetectedTime { get; }
    }

    /// <summary>
    /// Event arguments for a QRCodeWatcher's Added event.
    /// </summary>
    public class QRCodeAddedEventArgs
    {
        /// <summary>
        /// Gets the QR Code that was added
        /// </summary>
        public QRCode Code { get; }
    }

    /// <summary>
    /// Event arguments for a QRCodeWatcher's Removed event.
    /// </summary>
    public class QRCodeRemovedEventArgs
    {
        /// <summary>
        /// Gets the QR Code that was removed.
        /// </summary>
        public QRCode Code { get; }
    }

    /// <summary>
    /// Event arguments for a QRCodeWatcher's Updated event.
    /// </summary>
    public class QRCodeUpdatedEventArgs
    {
        /// <summary>
        /// Gets the QR Code that was updated.
        /// </summary>
        public QRCode Code { get; }
    }

    /// <summary>
    /// Represents the status of an access request for QR code detection.
    /// </summary>
    public enum QRCodeWatcherAccessStatus
    {
        /// <summary>
        /// The system has denied permission for the app to detect QR codes.
        /// </summary>
        DeniedBySystem = 0,
        /// <summary>
        /// The app has not declared the webcam capability in its manifest.
        /// </summary>
        NotDeclaredByApp = 1,
        /// <summary>
        /// The user has denied permission for the app to detect QR codes.
        /// </summary>
        DeniedByUser = 2,
        /// <summary>
        /// A user prompt is required to get permission to detect QR codes.
        /// </summary>
        UserPromptRequired = 3,
        /// <summary>
        /// The user has given permission to detect QR codes.
        /// </summary>
        Allowed = 4,
    }

    /// <summary>
    /// Detects QR codes in the user's environment.
    /// </summary>
    public class QRCodeWatcher
    {
        /// <summary>
        /// Gets whether QR code detection is supported on the current device.
        /// </summary>
        public static bool IsSupported();

        /// <summary>
        /// Request user consent before using QR code detection.
        /// </summary>
        public static IAsyncOperation<QRCodeWatcherAccessStatus> RequestAccessAsync();

        /// <summary>
        /// Constructs a new QRCodeWatcher.
        /// </summary>
        public QRCodeWatcher();

        /// <summary>
        /// Starts detecting QR codes.
        /// </summary>
        /// <remarks>
        /// Start should only be called once RequestAccessAsync has succeeded.
        /// Start should not be called if QR code detection is not supported.
        /// Check that IsSupported returns true before calling Start.
        /// </remarks>
        public void Start();

        /// <summary>
        /// Stops detecting QR codes.
        /// </summary>
        public void Stop();

        /// <summary>
        /// Get the list of QR codes detected.
        /// </summary>
        /// <remarks>
        /// </remarks>
        public IList<QRCode> GetList();

        /// <summary>
        /// Event representing the addition of a QR Code.
        /// </summary>
        public event EventHandler<QRCodeAddedEventArgs> Added;

        /// <summary>
        /// Event representing the removal of a QR Code.
        /// </summary>
        public event EventHandler<QRCodeRemovedEventArgs> Removed;

        /// <summary>
        /// Event representing the update of a QR Code.
        /// </summary>
        public event EventHandler<QRCodeUpdatedEventArgs> Updated;

        /// <summary>
        /// Event representing the enumeration of QR Codes completing after a Start call.
        /// </summary>
        public event EventHandler<Object> EnumerationCompleted;
    }

    /// <summary>
    /// Version info for QR codes, including Micro QR codes.
    /// </summary>
    public enum QRVersion
    {
        QR1 = 1,
        QR2 = 2,
        QR3 = 3,
        QR4 = 4,
        QR5 = 5,
        QR6 = 6,
        QR7 = 7,
        QR8 = 8,
        QR9 = 9,
        QR10 = 10,
        QR11 = 11,
        QR12 = 12,
        QR13 = 13,
        QR14 = 14,
        QR15 = 15,
        QR16 = 16,
        QR17 = 17,
        QR18 = 18,
        QR19 = 19,
        QR20 = 20,
        QR21 = 21,
        QR22 = 22,
        QR23 = 23,
        QR24 = 24,
        QR25 = 25,
        QR26 = 26,
        QR27 = 27,
        QR28 = 28,
        QR29 = 29,
        QR30 = 30,
        QR31 = 31,
        QR32 = 32,
        QR33 = 33,
        QR34 = 34,
        QR35 = 35,
        QR36 = 36,
        QR37 = 37,
        QR38 = 38,
        QR39 = 39,
        QR40 = 40,
        MicroQRM1 = 41,
        MicroQRM2 = 42,
        MicroQRM3 = 43,
        MicroQRM4 = 44,
    }
}

참고 항목