Bewerken

Share via


rxFastLinear: Fast Linear Model -- Stochastic Dual Coordinate Ascent

A Stochastic Dual Coordinate Ascent (SDCA) optimization trainer for linear binary classification and regression.

rxFastLinear is a trainer based on the Stochastic Dual Coordinate Ascent (SDCA) method, a state-of-the-art optimization technique for convex objective functions. The algorithm can be scaled for use on large out-of-memory data sets due to a semi-asynchronized implementation that supports multi-threading. primal and dual updates in a separate thread. Several choices of loss functions are also provided. The SDCA method combines several of the best properties and capabilities of logistic regression and SVM algorithms. For more information on SDCA, see the citations in the reference section.

Traditional optimization algorithms, such as stochastic gradient descent (SGD), optimize the empirical loss function directly. The SDCA chooses a different approach that optimizes the dual problem instead. The dual loss function is parametrized by per-example weights. In each iteration, when a training example from the training data set is read, the corresponding example weight is adjusted so that the dual loss function is optimized with respect to the current example. No learning rate is needed by SDCA to determine step size as is required by various gradient descent methods.

rxFastLinear supports binary classification with three types of loss functions currently: Log loss, hinge loss, and smoothed hinge loss. Linear regression also supports with squared loss function. Elastic net regularization can be specified by the l2Weight and l1Weight parameters. Note that the l2Weight has an effect on the rate of convergence. In general, the larger the l2Weight, the faster SDCA converges.

Note that rxFastLinear is a stochastic and streaming optimization algorithm. The result depends on the order of the training data. For reproducible results, it is recommended that one sets shuffle to FALSE and trainThreads to 1.

Usage

  rxFastLinear(formula = NULL, data, type = c("binary", "regression"),
    lossFunction = NULL, l2Weight = NULL, l1Weight = NULL,
    trainThreads = NULL, convergenceTolerance = 0.1, maxIterations = NULL,
    shuffle = TRUE, checkFrequency = NULL, normalize = "auto",
    mlTransforms = NULL, mlTransformVars = NULL, rowSelection = NULL,
    transforms = NULL, transformObjects = NULL, transformFunc = NULL,
    transformVars = NULL, transformPackages = NULL, transformEnvir = NULL,
    blocksPerRead = rxGetOption("blocksPerRead"),
    reportProgress = rxGetOption("reportProgress"), verbose = 1,
    computeContext = rxGetOption("computeContext"),
    ensemble = ensembleControl(), ...)

Arguments

formula

The formula described in rxFormula. Interaction terms and F() are currently not supported in MicrosoftML.

data

A data source object or a character string specifying a .xdf file or a data frame object.

type

Specifies the model type with a character string: "binary" for the default binary classification or "regression" for linear regression.

lossFunction

Specifies the empirical loss function to optimize. For binary classification, the following choices are available:

  • logLoss: The log-loss. This is the default.
  • hingeLoss: The SVM hinge loss. Its parameter represents the margin size.
  • smoothHingeLoss: The smoothed hinge loss. Its parameter represents the smoothing constant.
    For linear regression, squared loss squaredLoss is currently supported. When this parameter is set to NULL, its default value depends on the type of learning:
  • logLoss for binary classification.
  • squaredLoss for linear regression.

l2Weight

Specifies the L2 regularization weight. The value must be either non-negative or NULL. If NULL is specified, the actual value is automatically computed based on data set. NULL is the default value.

l1Weight

Specifies the L1 regularization weight. The value must be either non-negative or NULL. If NULL is specified, the actual value is automatically computed based on data set. NULL is the default value.

trainThreads

Specifies how many concurrent threads can be used to run the algorithm. When this parameter is set to NULL, the number of threads used is determined based on the number of logical processors available to the process as well as the sparsity of data. Set it to 1 to run the algorithm in a single thread.

convergenceTolerance

Specifies the tolerance threshold used as a convergence criterion. It must be between 0 and 1. The default value is 0.1. The algorithm is considered to have converged if the relative duality gap, which is the ratio between the duality gap and the primal loss, falls below the specified convergence tolerance.

maxIterations

Specifies an upper bound on the number of training iterations. This parameter must be positive or NULL. If NULL is specified, the actual value is automatically computed based on data set. Each iteration requires a complete pass over the training data. Training terminates after the total number of iterations reaches the specified upper bound or when the loss function converges, whichever happens earlier.

shuffle

Specifies whether to shuffle the training data. Set TRUE to shuffle the data; FALSE not to shuffle. The default value is TRUE. SDCA is a stochastic optimization algorithm. If shuffling is turned on, the training data is shuffled on each iteration.

checkFrequency

The number of iterations after which the loss function is computed and checked to determine whether it has converged. The value specified must be a positive integer or NULL. If NULL, the actual value is automatically computed based on data set. Otherwise, for example, if checkFrequency = 5 is specified, then the loss function is computed and convergence is checked every 5 iterations. The computation of the loss function requires a separate complete pass over the training data.

normalize

Specifies the type of automatic normalization used:

  • "auto": if normalization is needed, it is automatically performed. This is the default value.
  • "no": no normalization is performed.
  • "yes": normalization is performed.
  • "warn": if normalization is needed, a warning message is displayed, but normalization is not performed.
    Normalization rescales disparate data ranges to a standard scale. Feature scaling insures the distances between data points are proportional and enables various optimization methods such as gradient descent to converge much faster. If normalization is performed, a MaxMin normalizer is used. It normalizes values in an interval [a, b] where -1 <= a <= 0and 0 <= b <= 1 and b - a = 1. This normalizer preserves sparsity by mapping zero to zero.

mlTransforms

Specifies a list of MicrosoftML transforms to be performed on the data before training or NULL if no transforms are to be performed. See featurizeText, categorical, and categoricalHash, for transformations that are supported. These transformations are performed after any specified R transformations. The default value is NULL.

mlTransformVars

Specifies a character vector of variable names to be used in mlTransforms or NULL if none are to be used. The default value is NULL.

rowSelection

Specifies the rows (observations) from the data set that are to be used by the model with the name of a logical variable from the data set (in quotes) or with a logical expression using variables in the data set. For example, rowSelection = "old" will only use observations in which the value of the variable old is TRUE. rowSelection = (age > 20) & (age < 65) & (log(income) > 10) only uses observations in which the value of the age variable is between 20 and 65 and the value of the log of the income variable is greater than 10. The row selection is performed after processing any data transformations (see the arguments transforms or transformFunc). As with all expressions, rowSelection can be defined outside of the function call using the expression function.

transforms

An expression of the form list(name = expression, ``...) that represents the first round of variable transformations. As with all expressions, transforms (or rowSelection) can be defined outside of the function call using the expression function.

transformObjects

A named list that contains objects that can be referenced by transforms, transformsFunc, and rowSelection.

transformFunc

The variable transformation function. See rxTransform for details.

transformVars

A character vector of input data set variables needed for the transformation function. See rxTransform for details.

transformPackages

A character vector specifying additional R packages (outside of those specified in rxGetOption("transformPackages")) to be made available and preloaded for use in variable transformation functions. For example, those explicitly defined in RevoScaleR functions via their transforms and transformFunc arguments or those defined implicitly via their formula or rowSelection arguments. The transformPackages argument may also be NULL, indicating that no packages outside rxGetOption("transformPackages") are preloaded.

transformEnvir

A user-defined environment to serve as a parent to all environments developed internally and used for variable data transformation. If transformEnvir = NULL, a new "hash" environment with parent baseenv() is used instead.

blocksPerRead

Specifies the number of blocks to read for each chunk of data read from the data source.

reportProgress

An integer value that specifies the level of reporting on the row processing progress:

  • 0: no progress is reported.
  • 1: the number of processed rows is printed and updated.
  • 2: rows processed and timings are reported.
  • 3: rows processed and all timings are reported.

verbose

An integer value that specifies the amount of output wanted. If 0, no verbose output is printed during calculations. Integer values from 1 to 4 provide increasing amounts of information.

computeContext

Sets the context in which computations are executed, specified with a valid RxComputeContext. Currently local and RxInSqlServer compute contexts are supported.

ensemble

Control parameters for ensembling.

...

Additional arguments to be passed directly to the Microsoft Compute Engine.

Value

rxFastLinear: A rxFastLinear object with the trained model.

FastLinear: A learner specification object of class maml for the Fast Linear trainer.

Notes

This algorithm is multi-threaded and will not attempt to load the entire dataset into memory.

Author(s)

Microsoft Corporation Microsoft Technical Support

References

Scaling Up Stochastic Dual Coordinate Ascent

Stochastic Dual Coordinate Ascent Methods for Regularized Loss Minimization

See also

logLoss, hingeLoss, smoothHingeLoss, squaredLoss, rxFastTrees, rxFastForest, rxLogisticRegression, rxNeuralNet, rxOneClassSvm, featurizeText, categorical, categoricalHash, rxPredict.mlModel.

Examples


 # Train a binary classiication model with rxFastLinear
 res1 <- rxFastLinear(isCase ~ age + parity + education + spontaneous + induced,
                   transforms = list(isCase = case == 1),
                   data = infert,
                   type = "binary")
 # Print a summary of the model
 summary(res1)

 # Score to a data frame
 scoreDF <- rxPredict(res1, data = infert, 
     extraVarsToWrite = "isCase")

 # Compute and plot the Radio Operator Curve and AUC
 roc1 <- rxRoc(actualVarName = "isCase", predVarNames = "Probability", data = scoreDF) 
 plot(roc1)
 rxAuc(roc1)

 #########################################################################
 # rxFastLinear Regression

 # Create an xdf file with the attitude data
 myXdf <- tempfile(pattern = "tempAttitude", fileext = ".xdf")
 rxDataStep(attitude, myXdf, rowsPerRead = 50, overwrite = TRUE)
 myXdfDS <- RxXdfData(file = myXdf)

 attitudeForm <- rating ~ complaints + privileges + learning + 
     raises + critical + advance

 # Estimate a regression model with rxFastLinear 
 res2 <- rxFastLinear(formula = attitudeForm,  data = myXdfDS, 
     type = "regression")

 # Score to data frame
 scoreOut2 <- rxPredict(res2, data = myXdfDS, 
     extraVarsToWrite = "rating")

 # Plot the rating versus the score with a regression line
 rxLinePlot(rating~Score, type = c("p","r"), data = scoreOut2)

 # Clean up   
 file.remove(myXdf)