ReadOnlyCollection<T>.CopyTo(T[], Int32) Metoda

Definicja

Kopiuje cały ReadOnlyCollection<T> do zgodnego jednowymiarowego Array , rozpoczynając od określonego indeksu tablicy docelowej.Copies the entire ReadOnlyCollection<T> to a compatible one-dimensional Array, starting at the specified index of the target array.

public:
 virtual void CopyTo(cli::array <T> ^ array, int index);
public void CopyTo (T[] array, int index);
abstract member CopyTo : 'T[] * int -> unit
override this.CopyTo : 'T[] * int -> unit
Public Sub CopyTo (array As T(), index As Integer)

Parametry

array
T[]

Jednowymiarowy Array , który jest miejscem docelowym elementów skopiowanych z ReadOnlyCollection<T> .The one-dimensional Array that is the destination of the elements copied from ReadOnlyCollection<T>. ArrayMusi mieć indeksowanie oparte na zero.The Array must have zero-based indexing.

index
Int32

Numerowany od zera indeks w tablicy array, od którego rozpoczyna się kopiowanie.The zero-based index in array at which copying begins.

Implementuje

Wyjątki

array to null.array is null.

Parametr index ma wartość niższą niż zero.index is less than zero.

Liczba elementów w źródle ReadOnlyCollection<T> jest większa niż dostępne miejsce od index do końca miejsca docelowego array .The number of elements in the source ReadOnlyCollection<T> is greater than the available space from index to the end of the destination array.

Przykłady

Poniższy przykład kodu demonstruje kilka elementów członkowskich ReadOnlyCollection<T> klasy.The following code example demonstrates several members of the ReadOnlyCollection<T> class. Przykładowy kod tworzy List<T> ciągi i dodaje cztery nazwy dinozaurów.The code example creates a List<T> of strings and adds four dinosaur names to it. Przykład kodu otacza listę w ReadOnlyCollection<T> .The code example then wraps the list in a ReadOnlyCollection<T>.

Po demonstrowaniu Count elementów, Contains , Item[] i, IList.IndexOf przykład kodu pokazuje, że ReadOnlyCollection<T> jest tylko otoką dla oryginału List<T> przez dodanie nowego elementu do List<T> i wyświetlanie zawartości ReadOnlyCollection<T> .After demonstrating the Count, Contains, Item[], and IList.IndexOf members, the code example shows that the ReadOnlyCollection<T> is just a wrapper for the original List<T> by adding a new item to the List<T> and displaying the contents of the ReadOnlyCollection<T>.

Na koniec kod tworzy tablicę większą niż kolekcja i używa CopyTo metody, aby wstawić elementy kolekcji do środka tablicy.Finally, the code example creates an array larger than the collection and uses the CopyTo method to insert the elements of the collection into the middle of the array.

using namespace System;
using namespace System::Collections::Generic;
using namespace System::Collections::ObjectModel;

void main()
{
    List<String^>^ dinosaurs = gcnew List<String^>();

    dinosaurs->Add("Tyrannosaurus");
    dinosaurs->Add("Amargasaurus");
    dinosaurs->Add("Deinonychus");
    dinosaurs->Add("Compsognathus");

    ReadOnlyCollection<String^>^ readOnlyDinosaurs = 
        gcnew ReadOnlyCollection<String^>(dinosaurs);

    Console::WriteLine();
    for each(String^ dinosaur in readOnlyDinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    Console::WriteLine("\nCount: {0}", readOnlyDinosaurs->Count);

    Console::WriteLine("\nContains(\"Deinonychus\"): {0}", 
        readOnlyDinosaurs->Contains("Deinonychus"));

    Console::WriteLine("\nreadOnlyDinosaurs[3]: {0}", 
        readOnlyDinosaurs[3]);

    Console::WriteLine("\nIndexOf(\"Compsognathus\"): {0}", 
        readOnlyDinosaurs->IndexOf("Compsognathus"));

    Console::WriteLine("\nInsert into the wrapped List:");
    Console::WriteLine("Insert(2, \"Oviraptor\")");
    dinosaurs->Insert(2, "Oviraptor");

    Console::WriteLine();
    for each( String^ dinosaur in readOnlyDinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    array<String^>^ dinoArray = 
        gcnew array<String^>(readOnlyDinosaurs->Count + 2);
    readOnlyDinosaurs->CopyTo(dinoArray, 1);

    Console::WriteLine("\nCopied array has {0} elements:", 
        dinoArray->Length);
    for each( String^ dinosaur in dinoArray )
    {
        Console::WriteLine("\"{0}\"", dinosaur);
    }
}

/* This code example produces the following output:

Tyrannosaurus
Amargasaurus
Deinonychus
Compsognathus

Count: 4

Contains("Deinonychus"): True

readOnlyDinosaurs[3]: Compsognathus

IndexOf("Compsognathus"): 3

Insert into the wrapped List:
Insert(2, "Oviraptor")

Tyrannosaurus
Amargasaurus
Oviraptor
Deinonychus
Compsognathus

Copied array has 7 elements:
""
"Tyrannosaurus"
"Amargasaurus"
"Oviraptor"
"Deinonychus"
"Compsognathus"
""
 */
using System;
using System.Collections.Generic;
using System.Collections.ObjectModel;

public class Example
{
    public static void Main()
    {
        List<string> dinosaurs = new List<string>();

        dinosaurs.Add("Tyrannosaurus");
        dinosaurs.Add("Amargasaurus");
        dinosaurs.Add("Deinonychus");
        dinosaurs.Add("Compsognathus");

        ReadOnlyCollection<string> readOnlyDinosaurs =
            new ReadOnlyCollection<string>(dinosaurs);

        Console.WriteLine();
        foreach( string dinosaur in readOnlyDinosaurs )
        {
            Console.WriteLine(dinosaur);
        }

        Console.WriteLine("\nCount: {0}", readOnlyDinosaurs.Count);

        Console.WriteLine("\nContains(\"Deinonychus\"): {0}",
            readOnlyDinosaurs.Contains("Deinonychus"));

        Console.WriteLine("\nreadOnlyDinosaurs[3]: {0}",
            readOnlyDinosaurs[3]);

        Console.WriteLine("\nIndexOf(\"Compsognathus\"): {0}",
            readOnlyDinosaurs.IndexOf("Compsognathus"));

        Console.WriteLine("\nInsert into the wrapped List:");
        Console.WriteLine("Insert(2, \"Oviraptor\")");
        dinosaurs.Insert(2, "Oviraptor");

        Console.WriteLine();
        foreach( string dinosaur in readOnlyDinosaurs )
        {
            Console.WriteLine(dinosaur);
        }

        string[] dinoArray = new string[readOnlyDinosaurs.Count + 2];
        readOnlyDinosaurs.CopyTo(dinoArray, 1);

        Console.WriteLine("\nCopied array has {0} elements:",
            dinoArray.Length);
        foreach( string dinosaur in dinoArray )
        {
            Console.WriteLine("\"{0}\"", dinosaur);
        }
    }
}

/* This code example produces the following output:

Tyrannosaurus
Amargasaurus
Deinonychus
Compsognathus

Count: 4

Contains("Deinonychus"): True

readOnlyDinosaurs[3]: Compsognathus

IndexOf("Compsognathus"): 3

Insert into the wrapped List:
Insert(2, "Oviraptor")

Tyrannosaurus
Amargasaurus
Oviraptor
Deinonychus
Compsognathus

Copied array has 7 elements:
""
"Tyrannosaurus"
"Amargasaurus"
"Oviraptor"
"Deinonychus"
"Compsognathus"
""
 */
Imports System.Collections.Generic
Imports System.Collections.ObjectModel

Public Class Example

    Public Shared Sub Main()

        Dim dinosaurs As New List(Of String)

        dinosaurs.Add("Tyrannosaurus")
        dinosaurs.Add("Amargasaurus")
        dinosaurs.Add("Deinonychus")
        dinosaurs.Add("Compsognathus")

        Dim readOnlyDinosaurs As _
            New ReadOnlyCollection(Of String)(dinosaurs)

        Console.WriteLine()
        For Each dinosaur As String In readOnlyDinosaurs
            Console.WriteLine(dinosaur)
        Next

        Console.WriteLine(vbLf & "Count: {0}", _
            readOnlyDinosaurs.Count)

        Console.WriteLine(vbLf & "Contains(""Deinonychus""): {0}", _
            readOnlyDinosaurs.Contains("Deinonychus"))

        Console.WriteLine(vbLf & _
            "readOnlyDinosaurs(3): {0}", readOnlyDinosaurs(3))

        Console.WriteLine(vbLf & "IndexOf(""Compsognathus""): {0}", _
            readOnlyDinosaurs.IndexOf("Compsognathus"))

        Console.WriteLine(vbLf & "Insert into the wrapped List:")
        Console.WriteLine("Insert(2, ""Oviraptor"")")
        dinosaurs.Insert(2, "Oviraptor")

        Console.WriteLine()
        For Each dinosaur As String In readOnlyDinosaurs
            Console.WriteLine(dinosaur)
        Next

        Dim dinoArray(readOnlyDinosaurs.Count + 1) As String
        readOnlyDinosaurs.CopyTo(dinoArray, 1)

        Console.WriteLine(vbLf & "Copied array has {0} elements:", _
            dinoArray.Length)
        For Each dinosaur As String In dinoArray
            Console.WriteLine("""{0}""", dinosaur)
        Next

   End Sub
End Class

' This code example produces the following output:
'
'Tyrannosaurus
'Amargasaurus
'Deinonychus
'Compsognathus
'
'Count: 4
'
'Contains("Deinonychus"): True
'
'readOnlyDinosaurs(3): Compsognathus
'
'IndexOf("Compsognathus"): 3
'
'Insert into the wrapped List:
'Insert(2, "Oviraptor")
'
'Tyrannosaurus
'Amargasaurus
'Oviraptor
'Deinonychus
'Compsognathus
'
'Copied array has 7 elements:
'""
'"Tyrannosaurus"
'"Amargasaurus"
'"Oviraptor"
'"Deinonychus"
'"Compsognathus"
'""

Uwagi

Ta metoda używa Array.Copy do kopiowania elementów.This method uses Array.Copy to copy the elements.

Elementy są kopiowane do programu Array w tej samej kolejności, w jakiej moduł wyliczający wykonuje iterację przez ReadOnlyCollection<T> .The elements are copied to the Array in the same order that the enumerator iterates through the ReadOnlyCollection<T>.

Ta metoda jest n operacją o (), gdzie n is Count .This method is an O(n) operation, where n is Count.

Dotyczy