Convert.ToBoolean Metoda
Definicja
Konwertuje określoną wartość na równoważną wartość logiczną.Converts a specified value to an equivalent Boolean value.
Przeciążenia
| ToBoolean(SByte) |
Konwertuje wartość określoną 8-bitową liczbę całkowitą ze znakiem na równoważną wartość logiczną.Converts the value of the specified 8-bit signed integer to an equivalent Boolean value. |
| ToBoolean(String, IFormatProvider) |
Konwertuje określony ciąg reprezentujący wartość logiczną na jej odpowiednik logiczny przy użyciu określonych informacji o formatowaniu specyficznych dla kultury.Converts the specified string representation of a logical value to its Boolean equivalent, using the specified culture-specific formatting information. |
| ToBoolean(Object, IFormatProvider) |
Konwertuje wartość określonego obiektu na równoważną wartość logiczną przy użyciu określonych informacji o formatowaniu specyficznych dla kultury.Converts the value of the specified object to an equivalent Boolean value, using the specified culture-specific formatting information. |
| ToBoolean(UInt64) |
Konwertuje wartość określoną 64-bitową liczbę całkowitą bez znaku na równoważną wartość logiczną.Converts the value of the specified 64-bit unsigned integer to an equivalent Boolean value. |
| ToBoolean(UInt32) |
Konwertuje wartość określoną 32-bitową liczbę całkowitą bez znaku na równoważną wartość logiczną.Converts the value of the specified 32-bit unsigned integer to an equivalent Boolean value. |
| ToBoolean(UInt16) |
Konwertuje wartość określoną 16-bitową liczbę całkowitą bez znaku na równoważną wartość logiczną.Converts the value of the specified 16-bit unsigned integer to an equivalent Boolean value. |
| ToBoolean(String) |
Konwertuje określony ciąg reprezentujący wartość logiczną na odpowiadającą jej wartość logiczną.Converts the specified string representation of a logical value to its Boolean equivalent. |
| ToBoolean(Single) |
Konwertuje wartość określonej liczby zmiennoprzecinkowej o pojedynczej precyzji na równoważną wartość logiczną.Converts the value of the specified single-precision floating-point number to an equivalent Boolean value. |
| ToBoolean(Object) |
Konwertuje wartość określonego obiektu na równoważną wartość logiczną.Converts the value of a specified object to an equivalent Boolean value. |
| ToBoolean(Decimal) |
Konwertuje wartość określonej liczby dziesiętnej na równoważną wartość logiczną.Converts the value of the specified decimal number to an equivalent Boolean value. |
| ToBoolean(Int32) |
Konwertuje wartość określoną 32-bitową liczbę całkowitą ze znakiem na równoważną wartość logiczną.Converts the value of the specified 32-bit signed integer to an equivalent Boolean value. |
| ToBoolean(Int16) |
Konwertuje wartość określoną 16-bitową liczbę całkowitą ze znakiem na równoważną wartość logiczną.Converts the value of the specified 16-bit signed integer to an equivalent Boolean value. |
| ToBoolean(Double) |
Konwertuje wartość określonej liczby zmiennoprzecinkowej podwójnej precyzji na równoważną wartość logiczną.Converts the value of the specified double-precision floating-point number to an equivalent Boolean value. |
| ToBoolean(DateTime) |
Wywołanie tej metody zawsze zgłasza InvalidCastException .Calling this method always throws InvalidCastException. |
| ToBoolean(Char) |
Wywołanie tej metody zawsze zgłasza InvalidCastException .Calling this method always throws InvalidCastException. |
| ToBoolean(Byte) |
Konwertuje wartość określonej 8-bitowej liczby całkowitej bez znaku na równoważną wartość logiczną.Converts the value of the specified 8-bit unsigned integer to an equivalent Boolean value. |
| ToBoolean(Boolean) |
Zwraca określoną wartość logiczną; nie jest wykonywana żadna rzeczywista konwersja.Returns the specified Boolean value; no actual conversion is performed. |
| ToBoolean(Int64) |
Konwertuje wartość określoną 64-bitową liczbę całkowitą ze znakiem na równoważną wartość logiczną.Converts the value of the specified 64-bit signed integer to an equivalent Boolean value. |
ToBoolean(SByte)
Ważne
Ten interfejs API nie jest zgodny ze specyfikacją CLS.
Konwertuje wartość określoną 8-bitową liczbę całkowitą ze znakiem na równoważną wartość logiczną.Converts the value of the specified 8-bit signed integer to an equivalent Boolean value.
public:
static bool ToBoolean(System::SByte value);[System.CLSCompliant(false)]
public static bool ToBoolean (sbyte value);[<System.CLSCompliant(false)>]
static member ToBoolean : sbyte -> boolPublic Shared Function ToBoolean (value As SByte) As BooleanParametry
- value
- SByte
8-bitowa liczba całkowita ze znakiem do przekonwertowania.The 8-bit signed integer to convert.
Zwraca
true Jeśli value nie jest równa zero; w przeciwnym razie false .true if value is not zero; otherwise, false.
- Atrybuty
Przykłady
Poniższy przykład konwertuje tablicę SByte wartości na Boolean wartości.The following example converts an array of SByte values to Boolean values.
array<SByte>^ numbers = gcnew array<SByte> { SByte::MinValue, -1, 0, 10, 100, SByte::MaxValue };
bool result;
for each (SByte number in numbers)
{
result = Convert::ToBoolean(number);
Console::WriteLine("{0,-5} --> {1}", number, result);
}
// The example displays the following output:
// -128 --> True
// -1 --> True
// 0 --> False
// 10 --> True
// 100 --> True
// 127 --> True
sbyte[] numbers = { SByte.MinValue, -1, 0, 10, 100, SByte.MaxValue };
bool result;
foreach (sbyte number in numbers)
{
result = Convert.ToBoolean(number);
Console.WriteLine("{0,-5} --> {1}", number, result);
}
// The example displays the following output:
// -128 --> True
// -1 --> True
// 0 --> False
// 10 --> True
// 100 --> True
// 127 --> True
Dim numbers() As SByte = { SByte.MinValue, -1, 0, 10, 100, SByte.MaxValue }
Dim result As Boolean
For Each number As SByte In numbers
result = Convert.ToBoolean(number)
Console.WriteLine("{0,-5} --> {1}", number, result)
Next
' The example displays the following output:
' -128 --> True
' -1 --> True
' 0 --> False
' 10 --> True
' 100 --> True
' 127 --> True
Zobacz też
Dotyczy
ToBoolean(String, IFormatProvider)
Konwertuje określony ciąg reprezentujący wartość logiczną na jej odpowiednik logiczny przy użyciu określonych informacji o formatowaniu specyficznych dla kultury.Converts the specified string representation of a logical value to its Boolean equivalent, using the specified culture-specific formatting information.
public:
static bool ToBoolean(System::String ^ value, IFormatProvider ^ provider);public static bool ToBoolean (string value, IFormatProvider provider);public static bool ToBoolean (string? value, IFormatProvider? provider);static member ToBoolean : string * IFormatProvider -> boolPublic Shared Function ToBoolean (value As String, provider As IFormatProvider) As BooleanParametry
- value
- String
Ciąg, który zawiera wartość TrueString lub FalseString .A string that contains the value of either TrueString or FalseString.
- provider
- IFormatProvider
Obiekt, który dostarcza informacje o formatowaniu specyficzne dla kultury.An object that supplies culture-specific formatting information. Ten parametr jest ignorowany.This parameter is ignored.
Zwraca
true Jeśli value Equals TrueString , lub false Jeśli value równa się FalseString lub null .true if value equals TrueString, or false if value equals FalseString or null.
Wyjątki
value nie jest równa TrueString ani FalseString .value is not equal to TrueString or FalseString.
Uwagi
Jeśli wolisz nie obsługiwać wyjątku, jeśli konwersja nie powiedzie się, możesz wywołać Boolean.TryParse metodę zamiast.If you prefer not to handle an exception if the conversion fails, you can call the Boolean.TryParse method instead. Zwraca Boolean wartość wskazującą, czy konwersja zakończyła się powodzeniem, czy niepowodzeniem.It returns a Boolean value that indicates whether the conversion succeeded or failed.
Zobacz też
Dotyczy
ToBoolean(Object, IFormatProvider)
Konwertuje wartość określonego obiektu na równoważną wartość logiczną przy użyciu określonych informacji o formatowaniu specyficznych dla kultury.Converts the value of the specified object to an equivalent Boolean value, using the specified culture-specific formatting information.
public:
static bool ToBoolean(System::Object ^ value, IFormatProvider ^ provider);public static bool ToBoolean (object value, IFormatProvider provider);public static bool ToBoolean (object? value, IFormatProvider? provider);static member ToBoolean : obj * IFormatProvider -> boolPublic Shared Function ToBoolean (value As Object, provider As IFormatProvider) As BooleanParametry
- value
- Object
Obiekt, który implementuje IConvertible interfejs, lub null .An object that implements the IConvertible interface, or null.
- provider
- IFormatProvider
Obiekt, który dostarcza informacje o formatowaniu specyficzne dla kultury.An object that supplies culture-specific formatting information.
Zwraca
true lub false , który odzwierciedla wartość zwracaną przez wywołanie ToBoolean(IFormatProvider) metody dla typu podstawowego value .true or false, which reflects the value returned by invoking the ToBoolean(IFormatProvider) method for the underlying type of value. Jeśli value jest null , metoda zwraca false .If value is null, the method returns false.
Wyjątki
value jest ciągiem, który nie jest równy TrueString lub FalseString .value is a string that does not equal TrueString or FalseString.
value nie implementuje IConvertible interfejsu.value does not implement the IConvertible interface.
-lub--or-
Konwersja value do elementu Boolean nie jest obsługiwana.The conversion of value to a Boolean is not supported.
Przykłady
W poniższym przykładzie zdefiniowano klasę, która implementuje IConvertible i klasę implementującą IFormatProvider .The following example defines a class that implements IConvertible and a class that implements IFormatProvider. Obiekty klasy, która implementuje IConvertible tablicę Double wartości.Objects of the class that implements IConvertible hold an array of Double values. Obiekt każdej klasy jest przesyłany do ToBoolean(Object, IFormatProvider) metody.An object of each class is passed to the ToBoolean(Object, IFormatProvider) method. Ta metoda zwraca wartość true , Jeśli którakolwiek z odrzuconych wartości tablicy nie jest zerowa.This method returns true if any of the non-discarded array values are non-zero. IFormatProviderObiekt Określa, jak elementy są odrzucane dla tego obliczenia.The IFormatProvider object determines how elements are discarded for this calculation.
using namespace System;
using namespace System::Collections;
// Define the types of averaging available in the class
// implementing IConvertible.
public enum class AverageType : short
{
None = 0,
GeometricMean = 1,
ArithmeticMean = 2,
Median = 3
};
// Pass an instance of this class to methods that require an
// IFormatProvider. The class instance determines the type of
// average to calculate.
ref class AverageInfo: public IFormatProvider
{
protected:
AverageType AvgType;
public:
// Specify the type of averaging in the constructor.
AverageInfo( AverageType avgType )
{
this->AvgType = avgType;
}
// This method returns a reference to the containing object
// if an object of AverageInfo type is requested.
virtual Object^ GetFormat( Type^ argType )
{
if ( argType == AverageInfo::typeid)
return this;
else
return (Object^)0;
}
property AverageType TypeOfAverage
{
// Use this property to set or get the type of averaging.
AverageType get()
{
return this->AvgType;
}
void set( AverageType value )
{
this->AvgType = value;
}
}
};
// This class encapsulates an array of double values and implements
// the IConvertible interface. Most of the IConvertible methods
// return an average of the array elements in one of three types:
// arithmetic mean, geometric mean, or median.
ref class DataSet: public IConvertible
{
private:
static Object^ null = nullptr;
protected:
ArrayList^ data;
AverageInfo^ defaultProvider;
// This method unboxes a boxed double.
double UnBoxDouble( Object^ obj )
{
return *static_cast<double^>(obj);
}
public:
// Construct the object and add an initial list of values.
// Create a default format provider.
DataSet( ... array<Double>^values )
{
data = gcnew ArrayList( (Array^)values );
defaultProvider = gcnew AverageInfo( AverageType::ArithmeticMean );
}
// Add additional values with this method.
int Add( double value )
{
data->Add( value );
return data->Count;
}
property double Item[ int ]
{
// Get, set, and add values with this indexer property.
double get( int index )
{
if ( index >= 0 && index < data->Count )
return UnBoxDouble( data[ index ] );
else
throw gcnew InvalidOperationException( "[DataSet.get] Index out of range." );
}
void set( int index, double value )
{
if ( index >= 0 && index < data->Count )
data[ index ] = value;
else
if ( index == data->Count )
data->Add( value );
else
throw gcnew InvalidOperationException( "[DataSet.set] Index out of range." );
}
}
property int Count
{
// This property returns the number of elements in the object.
int get()
{
return data->Count;
}
}
protected:
// This method calculates the average of the object's elements.
double Average( AverageType avgType )
{
double SumProd;
if ( data->Count == 0 )
return 0.0;
switch ( avgType )
{
case AverageType::GeometricMean:
SumProd = 1.0;
for ( int Index = 0; Index < data->Count; Index++ )
SumProd *= UnBoxDouble( data[ Index ] );
// This calculation will not fail with negative
// elements.
return Math::Sign( SumProd ) * Math::Pow( Math::Abs( SumProd ), 1.0 / data->Count );
case AverageType::ArithmeticMean:
SumProd = 0.0;
for ( int Index = 0; Index < data->Count; Index++ )
SumProd += UnBoxDouble( data[ Index ] );
return SumProd / data->Count;
case AverageType::Median:
if ( data->Count % 2 == 0 )
return (UnBoxDouble( data[ data->Count / 2 ] ) + UnBoxDouble( data[ data->Count / 2 - 1 ] )) / 2.0;
else
return UnBoxDouble( data[ data->Count / 2 ] );
default:
return 0.0;
}
}
// Get the AverageInfo object from the caller's format provider,
// or use the local default.
AverageInfo^ GetAverageInfo( IFormatProvider^ provider )
{
AverageInfo^ avgInfo = nullptr;
if ( provider != nullptr )
avgInfo = static_cast<AverageInfo^>(provider->GetFormat( AverageInfo::typeid ));
if ( avgInfo == nullptr )
return defaultProvider;
else
return avgInfo;
}
// Calculate the average and limit the range.
double CalcNLimitAverage( double min, double max, IFormatProvider^ provider )
{
// Get the format provider and calculate the average.
AverageInfo^ avgInfo = GetAverageInfo( provider );
double avg = Average( avgInfo->TypeOfAverage );
// Limit the range, based on the minimum and maximum values
// for the type.
return avg > max ? max : avg < min ? min : avg;
}
public:
// The following elements are required by IConvertible.
// None of these conversion functions throw exceptions. When
// the data is out of range for the type, the appropriate
// MinValue or MaxValue is used.
virtual TypeCode GetTypeCode()
{
return TypeCode::Object;
}
virtual bool ToBoolean( IFormatProvider^ provider )
{
// ToBoolean is false if the dataset is empty.
if ( data->Count <= 0 )
return false;
// For median averaging, ToBoolean is true if any
// non-discarded elements are nonzero.
else
// For median averaging, ToBoolean is true if any
// non-discarded elements are nonzero.
if ( AverageType::Median == GetAverageInfo( provider )->TypeOfAverage )
{
if ( data->Count % 2 == 0 )
return (UnBoxDouble( data[ data->Count / 2 ] ) != 0.0 || UnBoxDouble( data[ data->Count / 2 - 1 ] ) != 0.0);
else
return UnBoxDouble( data[ data->Count / 2 ] ) != 0.0;
}
// For arithmetic or geometric mean averaging, ToBoolean is
// true if any element of the dataset is nonzero.
else
{
for ( int Index = 0; Index < data->Count; Index++ )
if ( UnBoxDouble( data[ Index ] ) != 0.0 )
return true;
return false;
}
}
virtual Byte ToByte( IFormatProvider^ provider )
{
return Convert::ToByte( CalcNLimitAverage( Byte::MinValue, Byte::MaxValue, provider ) );
}
virtual Char ToChar( IFormatProvider^ provider )
{
return Convert::ToChar( Convert::ToUInt16( CalcNLimitAverage( Char::MinValue, Char::MaxValue, provider ) ) );
}
// Convert to DateTime by adding the calculated average as
// seconds to the current date and time. A valid DateTime is
// always returned.
virtual DateTime ToDateTime( IFormatProvider^ provider )
{
double seconds = Average( GetAverageInfo( provider )->TypeOfAverage );
try
{
return DateTime::Now.AddSeconds( seconds );
}
catch ( ArgumentOutOfRangeException^ )
{
return seconds < 0.0 ? DateTime::MinValue : DateTime::MaxValue;
}
}
virtual Decimal ToDecimal( IFormatProvider^ provider )
{
// The Double conversion rounds Decimal.MinValue and
// Decimal.MaxValue to invalid Decimal values, so the
// following limits must be used.
return Convert::ToDecimal( CalcNLimitAverage( -79228162514264330000000000000.0, 79228162514264330000000000000.0, provider ) );
}
virtual double ToDouble( IFormatProvider^ provider )
{
return Average( GetAverageInfo( provider )->TypeOfAverage );
}
virtual short ToInt16( IFormatProvider^ provider )
{
return Convert::ToInt16( CalcNLimitAverage( Int16::MinValue, Int16::MaxValue, provider ) );
}
virtual int ToInt32( IFormatProvider^ provider )
{
return Convert::ToInt32( CalcNLimitAverage( Int32::MinValue, Int32::MaxValue, provider ) );
}
virtual __int64 ToInt64( IFormatProvider^ provider )
{
// The Double conversion rounds Int64.MinValue and
// Int64.MaxValue to invalid Int64 values, so the following
// limits must be used.
return Convert::ToInt64( CalcNLimitAverage( -9223372036854775000, 9223372036854775000, provider ) );
}
virtual signed char ToSByte( IFormatProvider^ provider )
{
return Convert::ToSByte( CalcNLimitAverage( SByte::MinValue, SByte::MaxValue, provider ) );
}
virtual float ToSingle( IFormatProvider^ provider )
{
return Convert::ToSingle( CalcNLimitAverage( Single::MinValue, Single::MaxValue, provider ) );
}
virtual UInt16 ToUInt16( IFormatProvider^ provider )
{
return Convert::ToUInt16( CalcNLimitAverage( UInt16::MinValue, UInt16::MaxValue, provider ) );
}
virtual UInt32 ToUInt32( IFormatProvider^ provider )
{
return Convert::ToUInt32( CalcNLimitAverage( UInt32::MinValue, UInt32::MaxValue, provider ) );
}
virtual UInt64 ToUInt64( IFormatProvider^ provider )
{
// The Double conversion rounds UInt64.MaxValue to an invalid
// UInt64 value, so the following limit must be used.
return Convert::ToUInt64( CalcNLimitAverage( 0, 18446744073709550000.0, provider ) );
}
virtual Object^ ToType( Type^ conversionType, IFormatProvider^ provider )
{
return Convert::ChangeType( Average( GetAverageInfo( provider )->TypeOfAverage ), conversionType );
}
virtual String^ ToString( IFormatProvider^ provider )
{
AverageType avgType = GetAverageInfo( provider )->TypeOfAverage;
return String::Format( "( {0}: {1:G10} )", avgType, Average( avgType ) );
}
};
// Display a DataSet with three different format providers.
void DisplayDataSet( DataSet^ ds )
{
IFormatProvider^ null = nullptr;
String^ fmt = "{0,-12}{1,20}{2,20}{3,20}";
AverageInfo^ median = gcnew AverageInfo( AverageType::Median );
AverageInfo^ geMean = gcnew AverageInfo( AverageType::GeometricMean );
// Display the dataset elements.
if ( ds->Count > 0 )
{
Console::Write( "\nDataSet: [{0}", ds->Item[ 0 ] );
for ( int iX = 1; iX < ds->Count; iX++ )
Console::Write( ", {0}", ds->Item[ iX ] );
Console::WriteLine( "]\n" );
}
Console::WriteLine( fmt, "Convert::", "Default", "Geometric Mean", "Median" );
Console::WriteLine( fmt, "---------", "-------", "--------------", "------" );
Console::WriteLine( fmt, "ToBoolean", Convert::ToBoolean( ds, null ), Convert::ToBoolean( ds, geMean ), Convert::ToBoolean( ds, median ) );
Console::WriteLine( fmt, "ToByte", Convert::ToByte( ds, null ), Convert::ToByte( ds, geMean ), Convert::ToByte( ds, median ) );
Console::WriteLine( fmt, "ToChar", Convert::ToChar( ds, null ), Convert::ToChar( ds, geMean ), Convert::ToChar( ds, median ) );
Console::WriteLine( "{0,-12}{1,20:yyyy-MM-dd HH:mm:ss}"
"{2,20:yyyy-MM-dd HH:mm:ss}{3,20:yyyy-MM-dd HH:mm:ss}", "ToDateTime", Convert::ToDateTime( ds, null ), Convert::ToDateTime( ds, geMean ), Convert::ToDateTime( ds, median ) );
Console::WriteLine( fmt, "ToDecimal", Convert::ToDecimal( ds, null ), Convert::ToDecimal( ds, geMean ), Convert::ToDecimal( ds, median ) );
Console::WriteLine( fmt, "ToDouble", Convert::ToDouble( ds, null ), Convert::ToDouble( ds, geMean ), Convert::ToDouble( ds, median ) );
Console::WriteLine( fmt, "ToInt16", Convert::ToInt16( ds, null ), Convert::ToInt16( ds, geMean ), Convert::ToInt16( ds, median ) );
Console::WriteLine( fmt, "ToInt32", Convert::ToInt32( ds, null ), Convert::ToInt32( ds, geMean ), Convert::ToInt32( ds, median ) );
Console::WriteLine( fmt, "ToInt64", Convert::ToInt64( ds, null ), Convert::ToInt64( ds, geMean ), Convert::ToInt64( ds, median ) );
Console::WriteLine( fmt, "ToSByte", Convert::ToSByte( ds, null ), Convert::ToSByte( ds, geMean ), Convert::ToSByte( ds, median ) );
Console::WriteLine( fmt, "ToSingle", Convert::ToSingle( ds, null ), Convert::ToSingle( ds, geMean ), Convert::ToSingle( ds, median ) );
Console::WriteLine( fmt, "ToUInt16", Convert::ToUInt16( ds, null ), Convert::ToUInt16( ds, geMean ), Convert::ToUInt16( ds, median ) );
Console::WriteLine( fmt, "ToUInt32", Convert::ToUInt32( ds, null ), Convert::ToUInt32( ds, geMean ), Convert::ToUInt32( ds, median ) );
Console::WriteLine( fmt, "ToUInt64", Convert::ToUInt64( ds, null ), Convert::ToUInt64( ds, geMean ), Convert::ToUInt64( ds, median ) );
}
int main()
{
Console::WriteLine( "This example of the "
"Convert::To<Type>( Object*, IFormatProvider* ) methods "
"\ngenerates the following output. The example "
"displays the values \nreturned by the methods, "
"using several IFormatProvider objects.\n" );
// To call a [ParamArray] method in C++, you cannot just
// list the parameters, you need to build an array.
array<Double>^dataElem = gcnew array<Double>(6);
dataElem[ 0 ] = 10.5;
dataElem[ 1 ] = 22.2;
dataElem[ 2 ] = 45.9;
dataElem[ 3 ] = 88.7;
dataElem[ 4 ] = 156.05;
dataElem[ 5 ] = 297.6;
DataSet^ ds1 = gcnew DataSet( dataElem );
DisplayDataSet( ds1 );
dataElem = gcnew array<Double>(5);
dataElem[ 0 ] = 359999.95;
dataElem[ 1 ] = 425000;
dataElem[ 2 ] = 499999.5;
dataElem[ 3 ] = 775000;
dataElem[ 4 ] = 1695000;
DataSet^ ds2 = gcnew DataSet( dataElem );
DisplayDataSet( ds2 );
}
/*
This example of the Convert::To<Type>( Object*, IFormatProvider* ) methods
generates the following output. The example displays the values
returned by the methods, using several IFormatProvider objects.
DataSet: [10.5, 22.2, 45.9, 88.7, 156.05, 297.6]
Convert:: Default Geometric Mean Median
--------- ------- -------------- ------
ToBoolean True True True
ToByte 103 59 67
ToChar g ; C
ToDateTime 2003-05-13 15:30:23 2003-05-13 15:29:39 2003-05-13 15:29:47
ToDecimal 103.491666666667 59.4332135445164 67.3
ToDouble 103.491666666667 59.4332135445164 67.3
ToInt16 103 59 67
ToInt32 103 59 67
ToInt64 103 59 67
ToSByte 103 59 67
ToSingle 103.4917 59.43321 67.3
ToUInt16 103 59 67
ToUInt32 103 59 67
ToUInt64 103 59 67
DataSet: [359999.95, 425000, 499999.5, 775000, 1695000]
Convert:: Default Geometric Mean Median
--------- ------- -------------- ------
ToBoolean True True True
ToByte 255 255 255
ToChar ? ? ?
ToDateTime 2003-05-22 08:05:19 2003-05-20 22:54:57 2003-05-19 10:21:59
ToDecimal 750999.89 631577.237188435 499999.5
ToDouble 750999.89 631577.237188435 499999.5
ToInt16 32767 32767 32767
ToInt32 751000 631577 500000
ToInt64 751000 631577 500000
ToSByte 127 127 127
ToSingle 750999.9 631577.3 499999.5
ToUInt16 65535 65535 65535
ToUInt32 751000 631577 500000
ToUInt64 751000 631577 500000
*/
using System;
using System.Collections;
// Define the types of averaging available in the class
// implementing IConvertible.
public enum AverageType : short
{
None = 0,
GeometricMean = 1,
ArithmeticMean = 2,
Median = 3
};
// Pass an instance of this class to methods that require an
// IFormatProvider. The class instance determines the type of
// average to calculate.
public class AverageInfo : IFormatProvider
{
protected AverageType AvgType;
// Specify the type of averaging in the constructor.
public AverageInfo( AverageType avgType )
{
this.AvgType = avgType;
}
// This method returns a reference to the containing object
// if an object of AverageInfo type is requested.
public object GetFormat( Type argType )
{
if ( argType == typeof( AverageInfo ) )
return this;
else
return null;
}
// Use this property to set or get the type of averaging.
public AverageType TypeOfAverage
{
get { return this.AvgType; }
set { this.AvgType = value; }
}
}
// This class encapsulates an array of double values and implements
// the IConvertible interface. Most of the IConvertible methods
// return an average of the array elements in one of three types:
// arithmetic mean, geometric mean, or median.
public class DataSet : IConvertible
{
protected ArrayList data;
protected AverageInfo defaultProvider;
// Construct the object and add an initial list of values.
// Create a default format provider.
public DataSet( params double[ ] values )
{
data = new ArrayList( values );
defaultProvider =
new AverageInfo( AverageType.ArithmeticMean );
}
// Add additional values with this method.
public int Add( double value )
{
data.Add( value );
return data.Count;
}
// Get, set, and add values with this indexer property.
public double this[ int index ]
{
get
{
if( index >= 0 && index < data.Count )
return (double)data[ index ];
else
throw new InvalidOperationException(
"[DataSet.get] Index out of range." );
}
set
{
if( index >= 0 && index < data.Count )
data[ index ] = value;
else if( index == data.Count )
data.Add( value );
else
throw new InvalidOperationException(
"[DataSet.set] Index out of range." );
}
}
// This property returns the number of elements in the object.
public int Count
{
get { return data.Count; }
}
// This method calculates the average of the object's elements.
protected double Average( AverageType avgType )
{
double SumProd;
if( data.Count == 0 )
return 0.0;
switch( avgType )
{
case AverageType.GeometricMean:
SumProd = 1.0;
for( int Index = 0; Index < data.Count; Index++ )
SumProd *= (double)data[ Index ];
// This calculation will not fail with negative
// elements.
return Math.Sign( SumProd ) * Math.Pow(
Math.Abs( SumProd ), 1.0 / data.Count );
case AverageType.ArithmeticMean:
SumProd = 0.0;
for( int Index = 0; Index < data.Count; Index++ )
SumProd += (double)data[ Index ];
return SumProd / data.Count;
case AverageType.Median:
if( data.Count % 2 == 0 )
return ( (double)data[ data.Count / 2 ] +
(double)data[ data.Count / 2 - 1 ] ) / 2.0;
else
return (double)data[ data.Count / 2 ];
default:
return 0.0;
}
}
// Get the AverageInfo object from the caller's format provider,
// or use the local default.
protected AverageInfo GetAverageInfo( IFormatProvider provider )
{
AverageInfo avgInfo = null;
if( provider != null )
avgInfo = (AverageInfo)provider.GetFormat(
typeof( AverageInfo ) );
if ( avgInfo == null )
return defaultProvider;
else
return avgInfo;
}
// Calculate the average and limit the range.
protected double CalcNLimitAverage( double min, double max,
IFormatProvider provider )
{
// Get the format provider and calculate the average.
AverageInfo avgInfo = GetAverageInfo( provider );
double avg = Average( avgInfo.TypeOfAverage );
// Limit the range, based on the minimum and maximum values
// for the type.
return avg > max ? max : avg < min ? min : avg;
}
// The following elements are required by IConvertible.
// None of these conversion functions throw exceptions. When
// the data is out of range for the type, the appropriate
// MinValue or MaxValue is used.
public TypeCode GetTypeCode( )
{
return TypeCode.Object;
}
public bool ToBoolean( IFormatProvider provider )
{
// ToBoolean is false if the dataset is empty.
if( data.Count <= 0 )
{
return false;
}
// For median averaging, ToBoolean is true if any
// non-discarded elements are nonzero.
else if( AverageType.Median ==
GetAverageInfo( provider ).TypeOfAverage )
{
if (data.Count % 2 == 0 )
return ( (double)data[ data.Count / 2 ] != 0.0 ||
(double)data[ data.Count / 2 - 1 ] != 0.0 );
else
return (double)data[ data.Count / 2 ] != 0.0;
}
// For arithmetic or geometric mean averaging, ToBoolean is
// true if any element of the dataset is nonzero.
else
{
for( int Index = 0; Index < data.Count; Index++ )
if( (double)data[ Index ] != 0.0 )
return true;
return false;
}
}
public byte ToByte( IFormatProvider provider )
{
return Convert.ToByte( CalcNLimitAverage(
Byte.MinValue, Byte.MaxValue, provider ) );
}
public char ToChar( IFormatProvider provider )
{
return Convert.ToChar( Convert.ToUInt16( CalcNLimitAverage(
Char.MinValue, Char.MaxValue, provider ) ) );
}
// Convert to DateTime by adding the calculated average as
// seconds to the current date and time. A valid DateTime is
// always returned.
public DateTime ToDateTime( IFormatProvider provider )
{
double seconds =
Average( GetAverageInfo( provider ).TypeOfAverage );
try
{
return DateTime.Now.AddSeconds( seconds );
}
catch( ArgumentOutOfRangeException )
{
return seconds < 0.0 ? DateTime.MinValue : DateTime.MaxValue;
}
}
public decimal ToDecimal( IFormatProvider provider )
{
// The Double conversion rounds Decimal.MinValue and
// Decimal.MaxValue to invalid Decimal values, so the
// following limits must be used.
return Convert.ToDecimal( CalcNLimitAverage(
-79228162514264330000000000000.0,
79228162514264330000000000000.0, provider ) );
}
public double ToDouble( IFormatProvider provider )
{
return Average( GetAverageInfo(provider).TypeOfAverage );
}
public short ToInt16( IFormatProvider provider )
{
return Convert.ToInt16( CalcNLimitAverage(
Int16.MinValue, Int16.MaxValue, provider ) );
}
public int ToInt32( IFormatProvider provider )
{
return Convert.ToInt32( CalcNLimitAverage(
Int32.MinValue, Int32.MaxValue, provider ) );
}
public long ToInt64( IFormatProvider provider )
{
// The Double conversion rounds Int64.MinValue and
// Int64.MaxValue to invalid Int64 values, so the following
// limits must be used.
return Convert.ToInt64( CalcNLimitAverage(
-9223372036854775000, 9223372036854775000, provider ) );
}
public SByte ToSByte( IFormatProvider provider )
{
return Convert.ToSByte( CalcNLimitAverage(
SByte.MinValue, SByte.MaxValue, provider ) );
}
public float ToSingle( IFormatProvider provider )
{
return Convert.ToSingle( CalcNLimitAverage(
Single.MinValue, Single.MaxValue, provider ) );
}
public UInt16 ToUInt16( IFormatProvider provider )
{
return Convert.ToUInt16( CalcNLimitAverage(
UInt16.MinValue, UInt16.MaxValue, provider ) );
}
public UInt32 ToUInt32( IFormatProvider provider )
{
return Convert.ToUInt32( CalcNLimitAverage(
UInt32.MinValue, UInt32.MaxValue, provider ) );
}
public UInt64 ToUInt64( IFormatProvider provider )
{
// The Double conversion rounds UInt64.MaxValue to an invalid
// UInt64 value, so the following limit must be used.
return Convert.ToUInt64( CalcNLimitAverage(
0, 18446744073709550000.0, provider ) );
}
public object ToType( Type conversionType,
IFormatProvider provider )
{
return Convert.ChangeType( Average(
GetAverageInfo( provider ).TypeOfAverage ),
conversionType );
}
public string ToString( IFormatProvider provider )
{
AverageType avgType = GetAverageInfo( provider ).TypeOfAverage;
return String.Format( "( {0}: {1:G10} )", avgType,
Average( avgType ) );
}
}
class IConvertibleProviderDemo
{
// Display a DataSet with three different format providers.
public static void DisplayDataSet( DataSet ds )
{
string fmt = "{0,-12}{1,20}{2,20}{3,20}";
AverageInfo median = new AverageInfo( AverageType.Median );
AverageInfo geMean =
new AverageInfo( AverageType.GeometricMean );
// Display the dataset elements.
if( ds.Count > 0 )
{
Console.Write( "\nDataSet: [{0}", ds[ 0 ] );
for( int iX = 1; iX < ds.Count; iX++ )
Console.Write( ", {0}", ds[ iX ] );
Console.WriteLine( "]\n" );
}
Console.WriteLine( fmt, "Convert.", "Default",
"Geometric Mean", "Median");
Console.WriteLine( fmt, "--------", "-------",
"--------------", "------");
Console.WriteLine( fmt, "ToBoolean",
Convert.ToBoolean( ds, null ),
Convert.ToBoolean( ds, geMean ),
Convert.ToBoolean( ds, median ) );
Console.WriteLine( fmt, "ToByte",
Convert.ToByte( ds, null ),
Convert.ToByte( ds, geMean ),
Convert.ToByte( ds, median ) );
Console.WriteLine( fmt, "ToChar",
Convert.ToChar( ds, null ),
Convert.ToChar( ds, geMean ),
Convert.ToChar( ds, median ) );
Console.WriteLine( "{0,-12}{1,20:yyyy-MM-dd HH:mm:ss}" +
"{2,20:yyyy-MM-dd HH:mm:ss}{3,20:yyyy-MM-dd HH:mm:ss}",
"ToDateTime", Convert.ToDateTime( ds, null ),
Convert.ToDateTime( ds, geMean ),
Convert.ToDateTime( ds, median ) );
Console.WriteLine( fmt, "ToDecimal",
Convert.ToDecimal( ds, null ),
Convert.ToDecimal( ds, geMean ),
Convert.ToDecimal( ds, median ) );
Console.WriteLine( fmt, "ToDouble",
Convert.ToDouble( ds, null ),
Convert.ToDouble( ds, geMean ),
Convert.ToDouble( ds, median ) );
Console.WriteLine( fmt, "ToInt16",
Convert.ToInt16( ds, null ),
Convert.ToInt16( ds, geMean ),
Convert.ToInt16( ds, median ) );
Console.WriteLine( fmt, "ToInt32",
Convert.ToInt32( ds, null ),
Convert.ToInt32( ds, geMean ),
Convert.ToInt32( ds, median ) );
Console.WriteLine( fmt, "ToInt64",
Convert.ToInt64( ds, null ),
Convert.ToInt64( ds, geMean ),
Convert.ToInt64( ds, median ) );
Console.WriteLine( fmt, "ToSByte",
Convert.ToSByte( ds, null ),
Convert.ToSByte( ds, geMean ),
Convert.ToSByte( ds, median ) );
Console.WriteLine( fmt, "ToSingle",
Convert.ToSingle( ds, null ),
Convert.ToSingle( ds, geMean ),
Convert.ToSingle( ds, median ) );
Console.WriteLine( fmt, "ToUInt16",
Convert.ToUInt16( ds, null ),
Convert.ToUInt16( ds, geMean ),
Convert.ToUInt16( ds, median ) );
Console.WriteLine( fmt, "ToUInt32",
Convert.ToUInt32( ds, null ),
Convert.ToUInt32( ds, geMean ),
Convert.ToUInt32( ds, median ) );
Console.WriteLine( fmt, "ToUInt64",
Convert.ToUInt64( ds, null ),
Convert.ToUInt64( ds, geMean ),
Convert.ToUInt64( ds, median ) );
}
public static void Main( )
{
Console.WriteLine( "This example of " +
"the Convert.To<Type>( object, IFormatProvider ) methods " +
"\ngenerates the following output. The example " +
"displays the values \nreturned by the methods, " +
"using several IFormatProvider objects.\n" );
DataSet ds1 = new DataSet(
10.5, 22.2, 45.9, 88.7, 156.05, 297.6 );
DisplayDataSet( ds1 );
DataSet ds2 = new DataSet(
359999.95, 425000, 499999.5, 775000, 1695000 );
DisplayDataSet( ds2 );
}
}
/*
This example of the Convert.To<Type>( object, IFormatProvider ) methods
generates the following output. The example displays the values
returned by the methods, using several IFormatProvider objects.
DataSet: [10.5, 22.2, 45.9, 88.7, 156.05, 297.6]
Convert. Default Geometric Mean Median
-------- ------- -------------- ------
ToBoolean True True True
ToByte 103 59 67
ToChar g ; C
ToDateTime 2003-05-13 15:04:12 2003-05-13 15:03:28 2003-05-13 15:03:35
ToDecimal 103.491666666667 59.4332135445164 67.3
ToDouble 103.491666666667 59.4332135445164 67.3
ToInt16 103 59 67
ToInt32 103 59 67
ToInt64 103 59 67
ToSByte 103 59 67
ToSingle 103.4917 59.43321 67.3
ToUInt16 103 59 67
ToUInt32 103 59 67
ToUInt64 103 59 67
DataSet: [359999.95, 425000, 499999.5, 775000, 1695000]
Convert. Default Geometric Mean Median
-------- ------- -------------- ------
ToBoolean True True True
ToByte 255 255 255
ToChar ? ? ?
ToDateTime 2003-05-22 07:39:08 2003-05-20 22:28:45 2003-05-19 09:55:48
ToDecimal 750999.89 631577.237188435 499999.5
ToDouble 750999.89 631577.237188435 499999.5
ToInt16 32767 32767 32767
ToInt32 751000 631577 500000
ToInt64 751000 631577 500000
ToSByte 127 127 127
ToSingle 750999.9 631577.3 499999.5
ToUInt16 65535 65535 65535
ToUInt32 751000 631577 500000
ToUInt64 751000 631577 500000
*/
Imports System.Collections
Module IConvertibleProviderDemo
' Define the types of averaging available in the class
' implementing IConvertible.
Enum AverageType as Short
None = 0
GeometricMean = 1
ArithmeticMean = 2
Median = 3
End Enum
' Pass an instance of this class to methods that require an
' IFormatProvider. The class instance determines the type of
' average to calculate.
Public Class AverageInfo
Implements IFormatProvider
Protected AvgType As AverageType
' Specify the type of averaging in the constructor.
Public Sub New( avgType As AverageType )
Me.AvgType = avgType
End Sub
' This method returns a reference to the containing object
' if an object of AverageInfo type is requested.
Public Function GetFormat( argType As Type ) As Object _
Implements IFormatProvider.GetFormat
If argType Is GetType( AverageInfo ) Then
Return Me
Else
Return Nothing
End If
End Function
' Use this property to set or get the type of averaging.
Public Property TypeOfAverage( ) As AverageType
Get
Return Me.AvgType
End Get
Set( ByVal value as AverageType )
Me.AvgType = value
End Set
End Property
End Class
' This class encapsulates an array of Double values and implements
' the IConvertible interface. Most of the IConvertible methods
' return an average of the array elements in one of three types:
' arithmetic mean, geometric mean, or median.
Public Class DataSet
Implements IConvertible
Protected data As ArrayList
Protected defaultProvider As AverageInfo
' Construct the object and add an initial list of values.
' Create a default format provider.
Public Sub New( ParamArray values( ) As Double )
data = New ArrayList( values )
defaultProvider = New AverageInfo( _
AverageType.ArithmeticMean )
End Sub
' Add additional values with this method.
Public Function Add( value As Double ) As Integer
data.Add( value )
Return data.Count
End Function
' Get, set, and add values with this indexer property.
Default Public Property Item(index As Integer) As Double
Get
If index >= 0 AndAlso index < data.Count Then
Return System.Convert.ToDouble( data( index ) )
Else
Throw New InvalidOperationException( _
"[DataSet.get] Index out of range." )
End If
End Get
Set
If index >= 0 AndAlso index < data.Count Then
data( index ) = value
ElseIf index = data.Count Then
data.Add( value )
Else
Throw New InvalidOperationException( _
"[DataSet.set] Index out of range." )
End If
End Set
End Property
' This property returns the number of elements in the object.
Public ReadOnly Property Count( ) As Integer
Get
Return data.Count
End Get
End Property
' This method calculates the average of the object's elements.
Protected Function Average( ByVal avgType As AverageType ) As Double
Dim SumProd As Double
Dim Index As Integer
If data.Count = 0 Then Return 0.0
Select Case avgType
Case AverageType.GeometricMean
SumProd = 1.0
For Index = 0 To data.Count - 1
SumProd *= data( Index )
Next Index
' This calculation will not fail with negative
' elements.
Return Math.Sign( SumProd ) * Math.Pow( _
Math.Abs( SumProd ), 1.0 / data.Count )
Case AverageType.ArithmeticMean
SumProd = 0.0
For Index = 0 To data.Count - 1
SumProd += data( Index )
Next Index
Return SumProd / data.Count
Case AverageType.Median
If data.Count Mod 2 = 0 Then
Return ( data( data.Count \ 2 ) + _
data( data.Count \ 2 - 1 ) ) / 2.0
Else
Return data( data.Count \ 2 )
End If
End Select
End Function
' Get the AverageInfo object from the caller's format
' provider, or use the local default.
Protected Function GetAverageInfo( _
provider As IFormatProvider ) As AverageInfo
Dim avgInfo As AverageInfo = Nothing
If Not provider Is Nothing Then
avgInfo = provider.GetFormat( GetType( AverageInfo ) )
End If
Return IIf( avgInfo Is Nothing, defaultProvider, avgInfo )
End Function
' Calculate the average and limit the range.
Protected Function CalcNLimitAverage( min As Double, _
max As Double, provider as IFormatProvider ) As Double
' Get the format provider and calculate the average.
Dim avgInfo As AverageInfo = GetAverageInfo( provider )
Dim avg As Double = Average( avgInfo.TypeOfAverage )
' Limit the range, based on the minimum and maximum values
' for the type.
Return IIf( avg > max, max, IIf( avg < min, min, avg ) )
End Function
' The following elements are required by IConvertible.
' None of these conversion functions throw exceptions. When
' the data is out of range for the type, the appropriate
' MinValue or MaxValue is used.
Public Function GetTypeCode( ) As TypeCode _
Implements IConvertible.GetTypeCode
Return TypeCode.Object
End Function
Function ToBoolean( ByVal provider As IFormatProvider ) As _
Boolean Implements IConvertible.ToBoolean
' ToBoolean is false if the dataset is empty.
If data.Count <= 0 Then
Return False
' For median averaging, ToBoolean is true if any
' non-discarded elements are nonzero.
ElseIf AverageType.Median = _
GetAverageInfo( provider ).TypeOfAverage Then
If data.Count Mod 2 = 0 Then
Return ( data( data.Count \ 2 ) <> 0.0 Or _
data( data.Count \ 2 - 1 ) <> 0.0 )
Else
Return data( data.Count \ 2 ) <> 0.0
End If
' For arithmetic or geometric mean averaging, ToBoolean is
' true if any element of the dataset is nonzero.
Else
Dim Index As Integer
For Index = 0 To data.Count - 1
If data( Index ) <> 0.0 Then Return True
Next Index
Return False
End If
End Function
Function ToByte( ByVal provider As IFormatProvider ) As Byte _
Implements IConvertible.ToByte
Return Convert.ToByte( CalcNLimitAverage( _
Byte.MinValue, Byte.MaxValue, provider ) )
End Function
Function ToChar( ByVal provider As IFormatProvider ) As Char _
Implements IConvertible.ToChar
Return Convert.ToChar( Convert.ToUInt16( _
CalcNLimitAverage( 0.0, &HFFFF, provider ) ) )
End Function
' Convert to DateTime by adding the calculated average as
' seconds to the current date and time. A valid DateTime is
' always returned.
Function ToDateTime( ByVal provider As IFormatProvider ) As _
DateTime Implements IConvertible.ToDateTime
Dim seconds As Double = Average( _
GetAverageInfo( provider ).TypeOfAverage )
Try
Return DateTime.Now.AddSeconds( seconds )
Catch ex As ArgumentOutOfRangeException
Return IIf( seconds < 0.0, DateTime.MinValue, _
DateTime.MaxValue )
End Try
End Function
Function ToDecimal( ByVal provider As IFormatProvider ) As _
Decimal Implements IConvertible.ToDecimal
' The Double conversion rounds Decimal.MinValue and
' Decimal.MaxValue to invalid Decimal values, so the
' following limits must be used.
Return Convert.ToDecimal( CalcNLimitAverage( _
-79228162514264330000000000000.0, _
79228162514264330000000000000.0, provider ) )
End Function
Function ToDouble( ByVal provider As IFormatProvider) As _
Double Implements IConvertible.ToDouble
Return Average( GetAverageInfo( provider ).TypeOfAverage )
End Function
Function ToInt16( ByVal provider As IFormatProvider ) As _
Short Implements IConvertible.ToInt16
Return Convert.ToInt16( CalcNLimitAverage( _
Int16.MinValue, Int16.MaxValue, provider ) )
End Function
Function ToInt32( ByVal provider As IFormatProvider ) As _
Integer Implements IConvertible.ToInt32
Return Convert.ToInt32( CalcNLimitAverage( _
Int32.MinValue, Int32.MaxValue, provider ) )
End Function
Function ToInt64( ByVal provider As IFormatProvider ) As Long _
Implements IConvertible.ToInt64
' The Double conversion rounds Int64.MinValue and
' Int64.MaxValue to invalid Long values, so the following
' limits must be used.
Return Convert.ToInt64( CalcNLimitAverage( _
-9223372036854775000, 9223372036854775000, provider ) )
End Function
Function ToSByte( ByVal provider As IFormatProvider ) As _
SByte Implements IConvertible.ToSByte
' SByte.MinValue and SByte.MaxValue are not defined in
' Visual Basic.
Return Convert.ToSByte( CalcNLimitAverage( _
-128, 127, provider ) )
End Function
Function ToSingle( ByVal provider As IFormatProvider ) As _
Single Implements IConvertible.ToSingle
Return Convert.ToSingle( CalcNLimitAverage( _
Single.MinValue, Single.MaxValue, provider ) )
End Function
Function ToUInt16( ByVal provider As IFormatProvider ) As _
UInt16 Implements IConvertible.ToUInt16
' UInt16.MinValue and UInt16.MaxValue are not defined in
' Visual Basic.
Return Convert.ToUInt16( CalcNLimitAverage( _
0, &HFFFF, provider ) )
End Function
Function ToUInt32( ByVal provider As IFormatProvider ) As _
UInt32 Implements IConvertible.ToUInt32
' UInt32.MinValue and UInt32.MaxValue are not defined in
' Visual Basic.
Return Convert.ToUInt32( CalcNLimitAverage( _
0, 4294967295, provider ) )
End Function
Function ToUInt64( ByVal provider As IFormatProvider ) As _
UInt64 Implements IConvertible.ToUInt64
' UInt64.MinValue and UInt64.MaxValue are not defined in
' Visual Basic. The Double conversion would have rounded
' UInt64.MaxValue, so the following limit must be used.
Return Convert.ToUInt64( CalcNLimitAverage( _
0, 18446744073709550000.0, provider ) )
End Function
Function ToType( ByVal conversionType As Type, _
ByVal provider As IFormatProvider) As Object _
Implements IConvertible.ToType
Return Convert.ChangeType( Average( GetAverageInfo( _
provider ).TypeOfAverage ), conversionType )
End Function
Overloads Function ToString( ByVal provider As IFormatProvider _
) As String Implements IConvertible.ToString
Dim avgType as AverageType = _
GetAverageInfo( provider ).TypeOfAverage
Return String.Format( "( {0}: {1:G10} )", avgType, _
Average( avgType ) )
End Function
End Class
' Display a DataSet with three different format providers.
Sub DisplayDataSet( ds As DataSet )
Dim fmt As String = "{0,-12}{1,20}{2,20}{3,20}"
Dim median As AverageInfo = New AverageInfo( AverageType.Median )
Dim geMean As AverageInfo = _
New AverageInfo( AverageType.GeometricMean )
Dim iX As Integer
' Display the dataset elements.
If ds.Count > 0 Then
Console.Write( vbCrLf & "DataSet: [{0}", ds( 0 ) )
For iX = 1 To ds.Count - 1
Console.Write( ", {0}", ds( iX ) )
Next iX
Console.WriteLine( "]" & vbCrLf )
End If
Console.WriteLine( fmt, "Convert.", "Default", _
"Geometric Mean", "Median" )
Console.WriteLine( fmt, "--------", "-------", _
"--------------", "------" )
Console.WriteLine( fmt, "ToBoolean", _
Convert.ToBoolean( ds, Nothing ), _
Convert.ToBoolean( ds, geMean ), _
Convert.ToBoolean( ds, median ) )
Console.WriteLine( fmt, "ToByte", _
Convert.ToByte( ds, Nothing ), _
Convert.ToByte( ds, geMean ), _
Convert.ToByte( ds, median ) )
Console.WriteLine( fmt, "ToChar", _
Convert.ToChar( ds, Nothing ), _
Convert.ToChar( ds, geMean ), _
Convert.ToChar( ds, median ) )
Console.WriteLine( "{0,-12}{1,20:yyyy-MM-dd HH:mm:ss}" & _
"{2,20:yyyy-MM-dd HH:mm:ss}{3,20:yyyy-MM-dd HH:mm:ss}", _
"ToDateTime", Convert.ToDateTime( ds, Nothing ), _
Convert.ToDateTime( ds, geMean ), _
Convert.ToDateTime( ds, median ) )
Console.WriteLine( fmt, "ToDecimal", _
Convert.ToDecimal( ds, Nothing ), _
Convert.ToDecimal( ds, geMean ), _
Convert.ToDecimal( ds, median ) )
Console.WriteLine( fmt, "ToDouble", _
Convert.ToDouble( ds, Nothing ), _
Convert.ToDouble( ds, geMean ), _
Convert.ToDouble( ds, median ) )
Console.WriteLine( fmt, "ToInt16", _
Convert.ToInt16( ds, Nothing ), _
Convert.ToInt16( ds, geMean ), _
Convert.ToInt16( ds, median ) )
Console.WriteLine( fmt, "ToInt32", _
Convert.ToInt32( ds, Nothing ), _
Convert.ToInt32( ds, geMean ), _
Convert.ToInt32( ds, median ) )
Console.WriteLine( fmt, "ToInt64", _
Convert.ToInt64( ds, Nothing ), _
Convert.ToInt64( ds, geMean ), _
Convert.ToInt64( ds, median ) )
Console.WriteLine( fmt, "ToSByte", _
Convert.ToSByte( ds, Nothing ), _
Convert.ToSByte( ds, geMean ), _
Convert.ToSByte( ds, median ) )
Console.WriteLine( fmt, "ToSingle", _
Convert.ToSingle( ds, Nothing ), _
Convert.ToSingle( ds, geMean ), _
Convert.ToSingle( ds, median ) )
Console.WriteLine( fmt, "ToUInt16", _
Convert.ToUInt16( ds, Nothing ), _
Convert.ToUInt16( ds, geMean ), _
Convert.ToUInt16( ds, median ) )
Console.WriteLine( fmt, "ToUInt32", _
Convert.ToUInt32( ds, Nothing ), _
Convert.ToUInt32( ds, geMean ), _
Convert.ToUInt32( ds, median ) )
Console.WriteLine( fmt, "ToUInt64", _
Convert.ToUInt64( ds, Nothing ), _
Convert.ToUInt64( ds, geMean ), _
Convert.ToUInt64( ds, median ) )
End Sub
Sub Main( )
Console.WriteLine( _
"This example of the Convert.To<Type>( Object, " & _
"IFormatProvider ) methods " & vbCrLf & "generates " & _
"the following output. The example displays the " & _
"values " & vbCrLf & "returned by the methods, " & _
"using several IFormatProvider objects." & vbCrLf )
Dim ds1 As New DataSet( 10.5, 22.2, 45.9, 88.7, 156.05, 297.6 )
DisplayDataSet( ds1 )
Dim ds2 As New DataSet( _
359999.95, 425000, 499999.5, 775000, 1695000 )
DisplayDataSet( ds2 )
End Sub
End Module
' This example of the Convert.To<Type>( Object, IFormatProvider ) methods
' generates the following output. The example displays the values
' returned by the methods, using several IFormatProvider objects.
'
' DataSet: [10.5, 22.2, 45.9, 88.7, 156.05, 297.6]
'
' Convert. Default Geometric Mean Median
' -------- ------- -------------- ------
' ToBoolean True True True
' ToByte 103 59 67
' ToChar g ; C
' ToDateTime 2003-05-13 14:52:53 2003-05-13 14:52:09 2003-05-13 14:52:17
' ToDecimal 103.491666666667 59.4332135445164 67.3
' ToDouble 103.491666666667 59.4332135445164 67.3
' ToInt16 103 59 67
' ToInt32 103 59 67
' ToInt64 103 59 67
' ToSByte 103 59 67
' ToSingle 103.4917 59.43321 67.3
' ToUInt16 103 59 67
' ToUInt32 103 59 67
' ToUInt64 103 59 67
'
' DataSet: [359999.95, 425000, 499999.5, 775000, 1695000]
'
' Convert. Default Geometric Mean Median
' -------- ------- -------------- ------
' ToBoolean True True True
' ToByte 255 255 255
' ToChar ? ? ?
' ToDateTime 2003-05-22 07:27:49 2003-05-20 22:17:27 2003-05-19 09:44:29
' ToDecimal 750999.89 631577.237188435 499999.5
' ToDouble 750999.89 631577.237188435 499999.5
' ToInt16 32767 32767 32767
' ToInt32 751000 631577 500000
' ToInt64 751000 631577 500000
' ToSByte 127 127 127
' ToSingle 750999.9 631577.3 499999.5
' ToUInt16 65535 65535 65535
' ToUInt32 751000 631577 500000
' ToUInt64 751000 631577 500000
Uwagi
provider umożliwia użytkownikowi określenie informacji o konwersji specyficznych dla kultury o zawartości value .provider enables the user to specify culture-specific conversion information about the contents of value. Typy podstawowe ignorują provider parametr, jednak można użyć parametru, jeśli value jest typem zdefiniowanym przez użytkownika, który implementuje IConvertible interfejs.The base types ignore the provider parameter; however, the parameter may be used if value is a user-defined type that implements the IConvertible interface.
Zobacz też
Dotyczy
ToBoolean(UInt64)
Ważne
Ten interfejs API nie jest zgodny ze specyfikacją CLS.
Konwertuje wartość określoną 64-bitową liczbę całkowitą bez znaku na równoważną wartość logiczną.Converts the value of the specified 64-bit unsigned integer to an equivalent Boolean value.
public:
static bool ToBoolean(System::UInt64 value);[System.CLSCompliant(false)]
public static bool ToBoolean (ulong value);[<System.CLSCompliant(false)>]
static member ToBoolean : uint64 -> boolPublic Shared Function ToBoolean (value As ULong) As BooleanParametry
- value
- UInt64
64-bitowa liczba całkowita bez znaku do przekonwertowania.The 64-bit unsigned integer to convert.
Zwraca
true Jeśli value nie jest równa zero; w przeciwnym razie false .true if value is not zero; otherwise, false.
- Atrybuty
Przykłady
Poniższy przykład konwertuje tablicę UInt64 wartości na Boolean wartości.The following example converts an array of UInt64 values to Boolean values.
array<UInt64>^ numbers = gcnew array<UInt64> { UInt64::MinValue, 6121, 403890774, UInt64::MaxValue };
bool result;
for each (UInt64 number in numbers)
{
result = Convert::ToBoolean(number);
Console::WriteLine("{0,-26:N0} --> {1}", number, result);
}
// The example displays the following output:
// 0 --> False
// 6,121 --> True
// 403,890,774 --> True
// 18,446,744,073,709,551,615 --> True
ulong[] numbers = { UInt64.MinValue, 6121, 403890774, UInt64.MaxValue };
bool result;
foreach (ulong number in numbers)
{
result = Convert.ToBoolean(number);
Console.WriteLine("{0,-26:N0} --> {1}", number, result);
}
// The example displays the following output:
// 0 --> False
// 6,121 --> True
// 403,890,774 --> True
// 18,446,744,073,709,551,615 --> True
Dim numbers() As ULong = { UInt64.MinValue, 6121, 403890774, UInt64.MaxValue }
Dim result As Boolean
For Each number As ULong In numbers
result = Convert.ToBoolean(number)
Console.WriteLine("{0,-26:N0} --> {1}", number, result)
Next
' The example displays the following output:
' 0 --> False
' 6,121 --> True
' 403,890,774 --> True
' 18,446,744,073,709,551,615 --> True
Zobacz też
Dotyczy
ToBoolean(UInt32)
Ważne
Ten interfejs API nie jest zgodny ze specyfikacją CLS.
Konwertuje wartość określoną 32-bitową liczbę całkowitą bez znaku na równoważną wartość logiczną.Converts the value of the specified 32-bit unsigned integer to an equivalent Boolean value.
public:
static bool ToBoolean(System::UInt32 value);[System.CLSCompliant(false)]
public static bool ToBoolean (uint value);[<System.CLSCompliant(false)>]
static member ToBoolean : uint32 -> boolPublic Shared Function ToBoolean (value As UInteger) As BooleanParametry
- value
- UInt32
32-bitowa liczba całkowita bez znaku do przekonwertowania.The 32-bit unsigned integer to convert.
Zwraca
true Jeśli value nie jest równa zero; w przeciwnym razie false .true if value is not zero; otherwise, false.
- Atrybuty
Przykłady
Poniższy przykład konwertuje tablicę Int32 wartości na Boolean wartości.The following example converts an array of Int32 values to Boolean values.
array<UInt32>^ numbers = gcnew array<UInt32> { UInt32::MinValue, 612, 4038907, Int32::MaxValue };
bool result;
for each (unsigned int number in numbers)
{
result = Convert::ToBoolean(number);
Console::WriteLine("{0,-15:N0} --> {1}", number, result);
}
// The example displays the following output:
// 0 --> False
// 612 --> True
// 4,038,907 --> True
// 2,147,483,647 --> True
uint[] numbers = { UInt32.MinValue, 612, 4038907, Int32.MaxValue };
bool result;
foreach (uint number in numbers)
{
result = Convert.ToBoolean(number);
Console.WriteLine("{0,-15:N0} --> {1}", number, result);
}
// The example displays the following output:
// 0 --> False
// 612 --> True
// 4,038,907 --> True
// 2,147,483,647 --> True
Dim numbers() As UInteger = { UInt32.MinValue, 612, 4038907, Int32.MaxValue }
Dim result As Boolean
For Each number As UInteger In numbers
result = Convert.ToBoolean(number)
Console.WriteLine("{0,-15:N0} --> {1}", number, result)
Next
' The example displays the following output:
' 0 --> False
' 612 --> True
' 4,038,907 --> True
' 2,147,483,647 --> True
Zobacz też
Dotyczy
ToBoolean(UInt16)
Ważne
Ten interfejs API nie jest zgodny ze specyfikacją CLS.
Konwertuje wartość określoną 16-bitową liczbę całkowitą bez znaku na równoważną wartość logiczną.Converts the value of the specified 16-bit unsigned integer to an equivalent Boolean value.
public:
static bool ToBoolean(System::UInt16 value);[System.CLSCompliant(false)]
public static bool ToBoolean (ushort value);[<System.CLSCompliant(false)>]
static member ToBoolean : uint16 -> boolPublic Shared Function ToBoolean (value As UShort) As BooleanParametry
- value
- UInt16
16-bitowa liczba całkowita bez znaku, która ma zostać przekształcona.The 16-bit unsigned integer to convert.
Zwraca
true Jeśli value nie jest równa zero; w przeciwnym razie false .true if value is not zero; otherwise, false.
- Atrybuty
Przykłady
Poniższy przykład konwertuje tablicę UInt16 wartości na Boolean wartości.The following example converts an array of UInt16 values to Boolean values.
array<unsigned short>^ numbers = gcnew array<unsigned short> { UInt16::MinValue, 216, 21453, UInt16::MaxValue };
bool result;
for each (unsigned short number in numbers)
{
result = Convert::ToBoolean(number);
Console::WriteLine("{0,-7:N0} --> {1}", number, result);
}
// The example displays the following output:
// 0 --> False
// 216 --> True
// 21,453 --> True
// 65,535 --> True
ushort[] numbers = { UInt16.MinValue, 216, 21453, UInt16.MaxValue };
bool result;
foreach (ushort number in numbers)
{
result = Convert.ToBoolean(number);
Console.WriteLine("{0,-7:N0} --> {1}", number, result);
}
// The example displays the following output:
// 0 --> False
// 216 --> True
// 21,453 --> True
// 65,535 --> True
Dim numbers() As UShort = { UInt16.MinValue, 216, 21453, UInt16.MaxValue }
Dim result As Boolean
For Each number As UShort In numbers
result = Convert.ToBoolean(number)
Console.WriteLine("{0,-7:N0} --> {1}", number, result)
Next
' The example displays the following output:
' 0 --> False
' 216 --> True
' 21,453 --> True
' 65,535 --> True
Zobacz też
Dotyczy
ToBoolean(String)
Konwertuje określony ciąg reprezentujący wartość logiczną na odpowiadającą jej wartość logiczną.Converts the specified string representation of a logical value to its Boolean equivalent.
public:
static bool ToBoolean(System::String ^ value);public static bool ToBoolean (string value);public static bool ToBoolean (string? value);static member ToBoolean : string -> boolPublic Shared Function ToBoolean (value As String) As BooleanParametry
- value
- String
Ciąg, który zawiera wartość TrueString lub FalseString .A string that contains the value of either TrueString or FalseString.
Zwraca
true Jeśli value Equals TrueString , lub false Jeśli value równa się FalseString lub null .true if value equals TrueString, or false if value equals FalseString or null.
Wyjątki
value nie jest równa TrueString ani FalseString .value is not equal to TrueString or FalseString.
Przykłady
W poniższym przykładzie zastosowano Convert.ToBoolean(String) metodę, aby przekonwertować różne ciągi na wartości logiczne.The following example uses the Convert.ToBoolean(String) method to convert various strings to Boolean values.
using namespace System;
void main()
{
array<String^>^ values = gcnew array<String^> { nullptr, String::Empty,
"true", "TrueString",
"False", " false ",
"-1", "0" };
for each (String^ value in values) {
try
{
Console::WriteLine("Converted '{0}' to {1}.", value,
Convert::ToBoolean(value));
}
catch (FormatException^ e)
{
Console::WriteLine("Unable to convert '{0}' to a Boolean.", value);
}
}
}
// The example displays the following output:
// Converted '' to False.
// Unable to convert '' to a Boolean.
// Converted 'true' to True.
// Unable to convert 'TrueString' to a Boolean.
// Converted 'False' to False.
// Converted ' false ' to False.
// Unable to convert '-1' to a Boolean.
// Unable to convert '0' to a Boolean.
using System;
public class BooleanConversion
{
public static void Main()
{
String[] values = { null, String.Empty, "true", "TrueString",
"False", " false ", "-1", "0" };
foreach (var value in values) {
try
{
Console.WriteLine("Converted '{0}' to {1}.", value,
Convert.ToBoolean(value));
}
catch (FormatException)
{
Console.WriteLine("Unable to convert '{0}' to a Boolean.", value);
}
}
}
}
// The example displays the following output:
// Converted '' to False.
// Unable to convert '' to a Boolean.
// Converted 'true' to True.
// Unable to convert 'TrueString' to a Boolean.
// Converted 'False' to False.
// Converted ' false ' to False.
// Unable to convert '-1' to a Boolean.
// Unable to convert '0' to a Boolean.
Module BooleanConversion
Public Sub Main()
Dim values() As String = { Nothing, String.Empty, "true",
"TrueString", "False", " false ",
"-1", "0" }
For Each value In values
Try
Console.WriteLine("Converted '{0}' to {1}.", value, _
Convert.ToBoolean(value))
Catch e As FormatException
Console.WriteLine("Unable to convert '{0}' to a Boolean.", value)
End Try
Next
End Sub
End Module
' The example displays the following output to the console:
' Converted '' to False.
' Unable to convert '' to a Boolean.
' Converted 'true' to True.
' Unable to convert 'TrueString' to a Boolean.
' Converted 'False' to False.
' Converted ' false ' to False.
' Unable to convert '-1' to a Boolean.
' Unable to convert '0' to a Boolean.
Uwagi
Aby można było pomyślnie wykonać konwersję, value parametr musi być taki sam Boolean.TrueString , którego wartością jest True , Boolean.FalseString , stałą, której wartość jest False lub musi być null .For a successful conversion to occur, the value parameter must equal either Boolean.TrueString, a constant whose value is True, Boolean.FalseString, a constant whose value is False, or it must be null. W porównaniu value z Boolean.TrueString i Boolean.FalseString , metoda ignoruje wielkość liter, a także wiodące i końcowe biały znak.In comparing value with Boolean.TrueString and Boolean.FalseString, the method ignores case as well as leading and trailing white space.
Jeśli wolisz nie obsługiwać wyjątku, jeśli konwersja nie powiedzie się, możesz wywołać Boolean.TryParse metodę zamiast.If you prefer not to handle an exception if the conversion fails, you can call the Boolean.TryParse method instead. Zwraca Boolean wartość wskazującą, czy konwersja zakończyła się powodzeniem, czy niepowodzeniem.It returns a Boolean value that indicates whether the conversion succeeded or failed.
Zobacz też
Dotyczy
ToBoolean(Single)
Konwertuje wartość określonej liczby zmiennoprzecinkowej o pojedynczej precyzji na równoważną wartość logiczną.Converts the value of the specified single-precision floating-point number to an equivalent Boolean value.
public:
static bool ToBoolean(float value);public static bool ToBoolean (float value);static member ToBoolean : single -> boolPublic Shared Function ToBoolean (value As Single) As BooleanParametry
- value
- Single
Liczba zmiennoprzecinkowa pojedynczej precyzji, która ma zostać przekształcona.The single-precision floating-point number to convert.
Zwraca
true Jeśli value nie jest równa zero; w przeciwnym razie false .true if value is not zero; otherwise, false.
Przykłady
Poniższy przykład konwertuje tablicę Single wartości na Boolean wartości.The following example converts an array of Single values to Boolean values.
array<float>^ numbers = gcnew array<float> { Single::MinValue, (float) -193.0012, (float) 20e-15f, 0,
(float) 10551e-10, (float) 100.3398, Single::MaxValue };
bool result;
for each (float number in numbers)
{
result = Convert::ToBoolean(number);
Console::WriteLine("{0,-15} --> {1}", number, result);
}
// The example displays the following output:
// -3.402823E+38 --> True
// -193.0012 --> True
// 2E-14 --> True
// 0 --> False
// 1.0551E-06 --> True
// 100.3398 --> True
// 3.402823E+38 --> True
float[] numbers = { Single.MinValue, -193.0012f, 20e-15f, 0f,
10551e-10f, 100.3398f, Single.MaxValue };
bool result;
foreach (float number in numbers)
{
result = Convert.ToBoolean(number);
Console.WriteLine("{0,-15} --> {1}", number, result);
}
// The example displays the following output:
// -3.402823E+38 --> True
// -193.0012 --> True
// 2E-14 --> True
// 0 --> False
// 1.0551E-06 --> True
// 100.3398 --> True
// 3.402823E+38 --> True
Dim numbers() As Single = { Single.MinValue, -193.0012, 20e-15, 0, _
10551e-10, 100.3398, Single.MaxValue }
Dim result As Boolean
For Each number As Single In numbers
result = Convert.ToBoolean(number)
Console.WriteLine("{0,-15} --> {1}", number, result)
Next
' The example displays the following output:
' -3.402823E+38 --> True
' -193.0012 --> True
' 2E-14 --> True
' 0 --> False
' 1.0551E-06 --> True
' 100.3398 --> True
' 3.402823E+38 --> True
Zobacz też
Dotyczy
ToBoolean(Object)
Konwertuje wartość określonego obiektu na równoważną wartość logiczną.Converts the value of a specified object to an equivalent Boolean value.
public:
static bool ToBoolean(System::Object ^ value);public static bool ToBoolean (object value);public static bool ToBoolean (object? value);static member ToBoolean : obj -> boolPublic Shared Function ToBoolean (value As Object) As BooleanParametry
- value
- Object
Obiekt, który implementuje IConvertible interfejs, lub null .An object that implements the IConvertible interface, or null.
Zwraca
true lub false , który odzwierciedla wartość zwracaną przez wywołanie ToBoolean(IFormatProvider) metody dla typu podstawowego value .true or false, which reflects the value returned by invoking the ToBoolean(IFormatProvider) method for the underlying type of value. Jeśli value jest null , metoda zwraca false .If value is null, the method returns false.
Wyjątki
value jest ciągiem, który nie jest równy TrueString lub FalseString .value is a string that does not equal TrueString or FalseString.
value nie implementuje IConvertible interfejsu.value does not implement the IConvertible interface.
-lub--or-
Konwersja value do elementu Boolean nie jest obsługiwana.The conversion of value to a Boolean is not supported.
Przykłady
Poniższy przykład konwertuje tablicę wartości obiektów na Boolean wartości.The following example converts an array of object values to Boolean values.
array<Object^>^ objects = gcnew array<Object^> { 16.33, -24, 0, "12", "12.7", String::Empty,
"1String", "True", "false", nullptr,
gcnew System::Collections::ArrayList };
for each (Object^ obj in objects)
{
Console::Write("{0,-40} --> ",
obj == nullptr ? "null" :
String::Format("{0} ({1})", obj, obj->GetType()->Name));
try {
Console::WriteLine("{0}", Convert::ToBoolean((Object^) obj));
}
catch (FormatException^) {
Console::WriteLine("Bad Format");
}
catch (InvalidCastException^) {
Console::WriteLine("No Conversion");
}
}
// The example displays the following output:
// 16.33 (Double) --> True
// -24 (Int32) --> True
// 0 (Int32) --> False
// 12 (String) --> Bad Format
// 12.7 (String) --> Bad Format
// (String) --> Bad Format
// 1String (String) --> Bad Format
// True (String) --> True
// false (String) --> False
// null --> False
// System.Collections.ArrayList (ArrayList) --> No Conversion
object[] objects = { 16.33, -24, 0, "12", "12.7", String.Empty,
"1String", "True", "false", null,
new System.Collections.ArrayList() };
foreach (object obj in objects)
{
Console.Write("{0,-40} --> ",
obj != null ?
String.Format("{0} ({1})", obj, obj.GetType().Name) :
"null");
try {
Console.WriteLine("{0}", Convert.ToBoolean(obj));
}
catch (FormatException) {
Console.WriteLine("Bad Format");
}
catch (InvalidCastException) {
Console.WriteLine("No Conversion");
}
}
// The example displays the following output:
// 16.33 (Double) --> True
// -24 (Int32) --> True
// 0 (Int32) --> False
// 12 (String) --> Bad Format
// 12.7 (String) --> Bad Format
// (String) --> Bad Format
// 1String (String) --> Bad Format
// True (String) --> True
// false (String) --> False
// null --> False
// System.Collections.ArrayList (ArrayList) --> No Conversion
Dim objects() As Object = {16.33, -24, 0, "12", "12.7", String.Empty, _
"1String", "True", "false", Nothing, _
New System.Collections.ArrayList() }
For Each obj As Object In objects
If obj IsNot Nothing Then
Console.Write("{0,-40} --> ", _
String.Format("{0} ({1})", obj, obj.GetType().Name))
Else
Console.Write("{0,-40} --> ", "Nothing")
End If
Try
Console.WriteLine("{0}", Convert.ToBoolean(obj))
Catch e As FormatException
Console.WriteLine("Bad Format")
Catch e As InvalidCastException
Console.WriteLine("No Conversion")
End Try
Next
' The example displays the following output:
' 16.33 (Double) --> True
' -24 (Int32) --> True
' 0 (Int32) --> False
' 12 (String) --> Bad Format
' 12.7 (String) --> Bad Format
' (String) --> Bad Format
' 1String (String) --> Bad Format
' True (String) --> True
' false (String) --> False
' Nothing --> False
' System.Collections.ArrayList (ArrayList) --> No Conversion
Zobacz też
Dotyczy
ToBoolean(Decimal)
Konwertuje wartość określonej liczby dziesiętnej na równoważną wartość logiczną.Converts the value of the specified decimal number to an equivalent Boolean value.
public:
static bool ToBoolean(System::Decimal value);public static bool ToBoolean (decimal value);static member ToBoolean : decimal -> boolPublic Shared Function ToBoolean (value As Decimal) As BooleanParametry
- value
- Decimal
Liczba do przekonwertowania.The number to convert.
Zwraca
true Jeśli value nie jest równa zero; w przeciwnym razie false .true if value is not zero; otherwise, false.
Przykłady
Poniższy przykład konwertuje tablicę Decimal wartości na Boolean wartości.The following example converts an array of Decimal values to Boolean values.
array<Decimal>^ numbers = gcnew array<Decimal> { Decimal::MinValue, (Decimal) -12034.87,
(Decimal) -100, (Decimal) 0, (Decimal) 300,
(Decimal) 6790823.45, Decimal::MaxValue };
bool result;
for each (Decimal number in numbers)
{
result = Convert::ToBoolean(number);
Console::WriteLine("{0,-30} --> {1}", number, result);
}
// The example displays the following output:
// -79228162514264337593543950335 --> True
// -12034.87 --> True
// -100 --> True
// 0 --> False
// 300 --> True
// 6790823.45 --> True
// 79228162514264337593543950335 --> True
decimal[] numbers = { Decimal.MinValue, -12034.87m, -100m, 0m,
300m, 6790823.45m, Decimal.MaxValue };
bool result;
foreach (decimal number in numbers)
{
result = Convert.ToBoolean(number);
Console.WriteLine("{0,-30} --> {1}", number, result);
}
// The example displays the following output:
// -79228162514264337593543950335 --> True
// -12034.87 --> True
// -100 --> True
// 0 --> False
// 300 --> True
// 6790823.45 --> True
// 79228162514264337593543950335 --> True
Dim numbers() As Decimal = { Decimal.MinValue, -12034.87d, -100d, _
0d, 300d, 6790823.45d, Decimal.MaxValue }
Dim result As Boolean
For Each number As Decimal In numbers
result = Convert.ToBoolean(number)
Console.WriteLine("{0,-30} --> {1}", number, result)
Next
' The example displays the following output:
' -79228162514264337593543950335 --> True
' -12034.87 --> True
' -100 --> True
' 0 --> False
' 300 --> True
' 6790823.45 --> True
' 79228162514264337593543950335 --> True
Zobacz też
Dotyczy
ToBoolean(Int32)
Konwertuje wartość określoną 32-bitową liczbę całkowitą ze znakiem na równoważną wartość logiczną.Converts the value of the specified 32-bit signed integer to an equivalent Boolean value.
public:
static bool ToBoolean(int value);public static bool ToBoolean (int value);static member ToBoolean : int -> boolPublic Shared Function ToBoolean (value As Integer) As BooleanParametry
- value
- Int32
32-bitowa liczba całkowita ze znakiem do przekonwertowania.The 32-bit signed integer to convert.
Zwraca
true Jeśli value nie jest równa zero; w przeciwnym razie false .true if value is not zero; otherwise, false.
Przykłady
Poniższy przykład konwertuje tablicę Int32 wartości na Boolean wartości.The following example converts an array of Int32 values to Boolean values.
array<int>^ numbers = gcnew array<int> { Int32::MinValue, -201649, -68, 0, 612, 4038907,
Int32::MaxValue };
bool result;
for each (int number in numbers)
{
result = Convert::ToBoolean(number);
Console::WriteLine("{0,-15:N0} --> {1}", number, result);
}
// The example displays the following output:
// -2,147,483,648 --> True
// -201,649 --> True
// -68 --> True
// 0 --> False
// 612 --> True
// 4,038,907 --> True
// 2,147,483,647 --> True
int[] numbers = { Int32.MinValue, -201649, -68, 0, 612, 4038907,
Int32.MaxValue };
bool result;
foreach (int number in numbers)
{
result = Convert.ToBoolean(number);
Console.WriteLine("{0,-15:N0} --> {1}", number, result);
}
// The example displays the following output:
// -2,147,483,648 --> True
// -201,649 --> True
// -68 --> True
// 0 --> False
// 612 --> True
// 4,038,907 --> True
// 2,147,483,647 --> True
Dim numbers() As Integer = { Int32.MinValue, -201649, -68, 0, 612, _
4038907, Int32.MaxValue }
Dim result As Boolean
For Each number As Integer In numbers
result = Convert.ToBoolean(number)
Console.WriteLine("{0,-15:N0} --> {1}", number, result)
Next
' The example displays the following output:
' -2,147,483,648 --> True
' -201,649 --> True
' -68 --> True
' 0 --> False
' 612 --> True
' 4,038,907 --> True
' 2,147,483,647 --> True
Zobacz też
Dotyczy
ToBoolean(Int16)
Konwertuje wartość określoną 16-bitową liczbę całkowitą ze znakiem na równoważną wartość logiczną.Converts the value of the specified 16-bit signed integer to an equivalent Boolean value.
public:
static bool ToBoolean(short value);public static bool ToBoolean (short value);static member ToBoolean : int16 -> boolPublic Shared Function ToBoolean (value As Short) As BooleanParametry
- value
- Int16
16-bitowa liczba całkowita ze znakiem, która ma zostać przekształcona.The 16-bit signed integer to convert.
Zwraca
true Jeśli value nie jest równa zero; w przeciwnym razie false .true if value is not zero; otherwise, false.
Przykłady
Poniższy przykład konwertuje tablicę Int16 wartości na Boolean wartości.The following example converts an array of Int16 values to Boolean values.
array<Int16>^ numbers = gcnew array<Int16> { Int16::MinValue, -10000, -154, 0, 216, 21453,
Int16::MaxValue };
bool result;
for each (Int16 number in numbers)
{
result = Convert::ToBoolean(number);
Console::WriteLine("{0,-7:N0} --> {1}", number, result);
}
// The example displays the following output:
// -32,768 --> True
// -10,000 --> True
// -154 --> True
// 0 --> False
// 216 --> True
// 21,453 --> True
// 32,767 --> True
short[] numbers = { Int16.MinValue, -10000, -154, 0, 216, 21453,
Int16.MaxValue };
bool result;
foreach (short number in numbers)
{
result = Convert.ToBoolean(number);
Console.WriteLine("{0,-7:N0} --> {1}", number, result);
}
// The example displays the following output:
// -32,768 --> True
// -10,000 --> True
// -154 --> True
// 0 --> False
// 216 --> True
// 21,453 --> True
// 32,767 --> True
Dim numbers() As Short = { Int16.MinValue, -10000, -154, 0, 216, _
21453, Int16.MaxValue }
Dim result As Boolean
For Each number As Short In numbers
result = Convert.ToBoolean(number)
Console.WriteLine("{0,-7:N0} --> {1}", number, result)
Next
' The example displays the following output:
' -32,768 --> True
' -10,000 --> True
' -154 --> True
' 0 --> False
' 216 --> True
' 21,453 --> True
' 32,767 --> True
Zobacz też
Dotyczy
ToBoolean(Double)
Konwertuje wartość określonej liczby zmiennoprzecinkowej podwójnej precyzji na równoważną wartość logiczną.Converts the value of the specified double-precision floating-point number to an equivalent Boolean value.
public:
static bool ToBoolean(double value);public static bool ToBoolean (double value);static member ToBoolean : double -> boolPublic Shared Function ToBoolean (value As Double) As BooleanParametry
- value
- Double
Liczba zmiennoprzecinkowa podwójnej precyzji, która ma zostać przekształcona.The double-precision floating-point number to convert.
Zwraca
true Jeśli value nie jest równa zero; w przeciwnym razie false .true if value is not zero; otherwise, false.
Przykłady
Poniższy przykład konwertuje wartość logiczną na Double a i na Double wartość logiczną.The following example converts a Boolean to a Double and a Double to a Boolean value.
public:
void ConvertDoubleBool( double doubleVal )
{
bool boolVal;
// Double to bool conversion cannot overflow.
boolVal = System::Convert::ToBoolean( doubleVal );
System::Console::WriteLine( " {0} as a Boolean is: {1}.",
doubleVal, boolVal );
// bool to double conversion cannot overflow.
doubleVal = System::Convert::ToDouble( boolVal );
System::Console::WriteLine( " {0} as a double is: {1}.",
boolVal, doubleVal );
}
public void ConvertDoubleBool(double doubleVal) {
bool boolVal;
// Double to bool conversion cannot overflow.
boolVal = System.Convert.ToBoolean(doubleVal);
System.Console.WriteLine("{0} as a Boolean is: {1}.",
doubleVal, boolVal);
// bool to double conversion cannot overflow.
doubleVal = System.Convert.ToDouble(boolVal);
System.Console.WriteLine("{0} as a double is: {1}.",
boolVal, doubleVal);
}
Public Sub ConvertDoubleBool(ByVal doubleVal As Double)
Dim boolVal As Boolean
'Double to Boolean conversion cannot overflow.
boolVal = System.Convert.ToBoolean(doubleVal)
System.Console.WriteLine("{0} as a Boolean is: {1}.", _
doubleVal, boolVal)
'Boolean to Double conversion cannot overflow.
doubleVal = System.Convert.ToDouble(boolVal)
System.Console.WriteLine("{0} as a Double is: {1}.", _
boolVal, doubleVal)
End Sub
Zobacz też
Dotyczy
ToBoolean(DateTime)
Wywołanie tej metody zawsze zgłasza InvalidCastException .Calling this method always throws InvalidCastException.
public:
static bool ToBoolean(DateTime value);public static bool ToBoolean (DateTime value);static member ToBoolean : DateTime -> boolPublic Shared Function ToBoolean (value As DateTime) As BooleanParametry
- value
- DateTime
Wartość daty i godziny, która ma zostać przekształcona.The date and time value to convert.
Zwraca
Ta konwersja nie jest obsługiwana.This conversion is not supported. Nie jest zwracana żadna wartość.No value is returned.
Wyjątki
Ta konwersja nie jest obsługiwana.This conversion is not supported.
Przykłady
Poniższy przykład pokazuje, że próba konwersji DateTime wartości na typ Boolean zwraca InvalidCastException .The following example demonstrates that an attempt to convert a DateTime value to a Boolean type throws InvalidCastException.
public:
void ConvertBoolean()
{
const int year = 1979;
const int month = 7;
const int day = 28;
const int hour = 13;
const int minute = 26;
const int second = 15;
const int millisecond = 53;
DateTime dateTime( year, month, day, hour,
minute, second, millisecond );
bool boolVal;
// System::InvalidCastException is always thrown.
try
{
boolVal = System::Convert::ToBoolean( dateTime );
}
catch ( System::InvalidCastException^ )
{
System::Console::WriteLine( "Conversion from DateTime to Boolean "+
"is not supported by the .NET Framework." );
}
}
public void ConvertBoolean() {
const int year = 1979;
const int month = 7;
const int day = 28;
const int hour = 13;
const int minute = 26;
const int second = 15;
const int millisecond = 53;
DateTime dateTime = new DateTime(year, month, day, hour,
minute, second, millisecond);
bool boolVal;
// System.InvalidCastException is always thrown.
try {
boolVal = System.Convert.ToBoolean(dateTime);
}
catch (System.InvalidCastException) {
System.Console.WriteLine("Conversion from DateTime to " +
"Boolean is not supported by the .NET Framework.");
}
}
Public Sub ConvertBoolean()
Const year As Integer = 1979
Const month As Integer = 7
Const day As Integer = 28
Const hour As Integer = 13
Const minute As Integer = 26
Const second As Integer = 15
Const millisecond As Integer = 53
Dim dateTime As New DateTime(year, month, day, hour, minute, _
second, millisecond)
Dim boolVal As Boolean
' System.InvalidCastException is always thrown.
Try
boolVal = System.Convert.ToBoolean(dateTime)
Catch exception As System.InvalidCastException
System.Console.WriteLine("Conversion from DateTime to " + _
"Boolean is not supported by the .NET Framework.")
End Try
End Sub
Dotyczy
ToBoolean(Char)
Wywołanie tej metody zawsze zgłasza InvalidCastException .Calling this method always throws InvalidCastException.
public:
static bool ToBoolean(char value);public static bool ToBoolean (char value);static member ToBoolean : char -> boolPublic Shared Function ToBoolean (value As Char) As BooleanParametry
- value
- Char
Znak Unicode, który ma zostać przekształcony.The Unicode character to convert.
Zwraca
Ta konwersja nie jest obsługiwana.This conversion is not supported. Nie jest zwracana żadna wartość.No value is returned.
Wyjątki
Ta konwersja nie jest obsługiwana.This conversion is not supported.
Zobacz też
Dotyczy
ToBoolean(Byte)
Konwertuje wartość określonej 8-bitowej liczby całkowitej bez znaku na równoważną wartość logiczną.Converts the value of the specified 8-bit unsigned integer to an equivalent Boolean value.
public:
static bool ToBoolean(System::Byte value);public static bool ToBoolean (byte value);static member ToBoolean : byte -> boolPublic Shared Function ToBoolean (value As Byte) As BooleanParametry
- value
- Byte
8-bitowa liczba całkowita bez znaku do przekonwertowania.The 8-bit unsigned integer to convert.
Zwraca
true Jeśli value nie jest równa zero; w przeciwnym razie false .true if value is not zero; otherwise, false.
Przykłady
Poniższy przykład konwertuje tablicę Byte wartości na Boolean wartości.The following example converts an array of Byte values to Boolean values.
array<Byte>^ bytes = gcnew array<Byte> { Byte::MinValue, 100, 200, Byte::MaxValue };
bool result;
for each (Byte byteValue in bytes)
{
result = Convert::ToBoolean(byteValue);
Console::WriteLine("{0,-5} --> {1}", byteValue, result);
}
// The example displays the following output:
// 0 --> False
// 100 --> True
// 200 --> True
// 255 --> True
byte[] bytes = { Byte.MinValue, 100, 200, Byte.MaxValue };
bool result;
foreach (byte byteValue in bytes)
{
result = Convert.ToBoolean(byteValue);
Console.WriteLine("{0,-5} --> {1}", byteValue, result);
}
// The example displays the following output:
// 0 --> False
// 100 --> True
// 200 --> True
// 255 --> True
Dim bytes() As Byte = { Byte.MinValue, 100, 200, Byte.MaxValue }
Dim result As Boolean
For Each byteValue As Byte In bytes
result = Convert.ToBoolean(byteValue)
Console.WriteLine("{0,-5} --> {1}", byteValue, result)
Next
' The example displays the following output:
' 0 --> False
' 100 --> True
' 200 --> True
' 255 --> True
Zobacz też
Dotyczy
ToBoolean(Boolean)
Zwraca określoną wartość logiczną; nie jest wykonywana żadna rzeczywista konwersja.Returns the specified Boolean value; no actual conversion is performed.
public:
static bool ToBoolean(bool value);public static bool ToBoolean (bool value);static member ToBoolean : bool -> boolPublic Shared Function ToBoolean (value As Boolean) As BooleanParametry
- value
- Boolean
Wartość logiczna, która ma zostać zwrócona.The Boolean value to return.
Zwraca
value jest zwracany bez zmian.value is returned unchanged.
Zobacz też
Dotyczy
ToBoolean(Int64)
Konwertuje wartość określoną 64-bitową liczbę całkowitą ze znakiem na równoważną wartość logiczną.Converts the value of the specified 64-bit signed integer to an equivalent Boolean value.
public:
static bool ToBoolean(long value);public static bool ToBoolean (long value);static member ToBoolean : int64 -> boolPublic Shared Function ToBoolean (value As Long) As BooleanParametry
- value
- Int64
64-bitowa liczba całkowita ze znakiem do przekonwertowania.The 64-bit signed integer to convert.
Zwraca
true Jeśli value nie jest równa zero; w przeciwnym razie false .true if value is not zero; otherwise, false.
Przykłady
Poniższy przykład konwertuje tablicę Int64 wartości na Boolean wartości.The following example converts an array of Int64 values to Boolean values.
array<Int64>^ numbers = gcnew array<Int64> { Int64::MinValue, -2016493, -689, 0, 6121,
403890774, Int64::MaxValue };
bool result;
for each (Int64 number in numbers)
{
result = Convert::ToBoolean(number);
Console::WriteLine("{0,-26:N0} --> {1}", number, result);
}
// The example displays the following output:
// -9,223,372,036,854,775,808 --> True
// -2,016,493 --> True
// -689 --> True
// 0 --> False
// 6,121 --> True
// 403,890,774 --> True
// 9,223,372,036,854,775,807 --> True
long[] numbers = { Int64.MinValue, -2016493, -689, 0, 6121,
403890774, Int64.MaxValue };
bool result;
foreach (long number in numbers)
{
result = Convert.ToBoolean(number);
Console.WriteLine("{0,-26:N0} --> {1}", number, result);
}
// The example displays the following output:
// -9,223,372,036,854,775,808 --> True
// -2,016,493 --> True
// -689 --> True
// 0 --> False
// 6,121 --> True
// 403,890,774 --> True
// 9,223,372,036,854,775,807 --> True
Dim numbers() As Long = { Int64.MinValue, -2016493, -689, 0, 6121, _
403890774, Int64.MaxValue }
Dim result As Boolean
For Each number As Long In numbers
result = Convert.ToBoolean(number)
Console.WriteLine("{0,-26:N0} --> {1}", number, result)
Next
' The example displays the following output:
' -9,223,372,036,854,775,808 --> True
' -2,016,493 --> True
' -689 --> True
' 0 --> False
' 6,121 --> True
' 403,890,774 --> True
' 9,223,372,036,854,775,807 --> True