AccessibleObject.Bounds Właściwość

Definicja

Pobiera lokalizację i rozmiar dostępnego obiektu.Gets the location and size of the accessible object.

public:
 virtual property System::Drawing::Rectangle Bounds { System::Drawing::Rectangle get(); };
public virtual System.Drawing.Rectangle Bounds { get; }
member this.Bounds : System.Drawing.Rectangle
Public Overridable ReadOnly Property Bounds As Rectangle

Wartość właściwości

Rectangle

RectangleReprezentuje granice dostępnego obiektu.A Rectangle that represents the bounds of the accessible object.

Wyjątki

Nie można pobrać granic formantu.The bounds of control cannot be retrieved.

Przykłady

Poniższy przykład pokazuje, jak utworzyć formant wykresu z obsługą ułatwień dostępu przy użyciu AccessibleObject klas i, Control.ControlAccessibleObject Aby uwidocznić dostępne informacje.The following example demonstrates the creation of an accessibility-aware chart control, using the AccessibleObject and Control.ControlAccessibleObject classes to expose accessible information. Kontrolka umieszcza dwie krzywe wraz z legendą.The control plots two curves along with a legend. ChartControlAccessibleObjectKlasa, która pochodzi od ControlAccessibleObject , jest używana w CreateAccessibilityInstance metodzie, aby zapewnić niestandardowe informacje dostępne dla formantu wykresu.The ChartControlAccessibleObject class, which derives from ControlAccessibleObject, is used in the CreateAccessibilityInstance method to provide custom accessible information for the chart control. Ponieważ legenda wykresu nie jest rzeczywistą Control kontrolką, ale zamiast tego jest rysowana przez formant wykresu, nie zawiera żadnych wbudowanych informacji.Since the chart legend is not an actual Control -based control, but instead is drawn by the chart control, it does not have any built-in accessible information. Z tego powodu ChartControlAccessibleObject Klasa przesłania GetChild metodę w celu zwrócenia CurveLegendAccessibleObject , która reprezentuje dostępne informacje dla każdej części legendy.Because of this, the ChartControlAccessibleObject class overrides the GetChild method to return the CurveLegendAccessibleObject that represents accessible information for each part of the legend. Gdy aplikacja obsługująca dostęp będzie korzystać z tego formantu, formant może udostępnić wymagane informacje.When an accessible-aware application uses this control, the control can provide the necessary accessible information.

Ten fragment kodu ilustruje zastępowanie Bounds właściwości.This code excerpt demonstrates overriding the Bounds property. Zobacz AccessibleObject Przegląd klasy, aby uzyskać pełny przykład kodu.See the AccessibleObject class overview for the complete code example.

   // Inner class CurveLegendAccessibleObject represents accessible information
   // associated with the CurveLegend object.
public:
   ref class CurveLegendAccessibleObject: public AccessibleObject
   {
   private:
      CurveLegend^ curveLegend;

   public:
      CurveLegendAccessibleObject( CurveLegend^ curveLegend )
         : AccessibleObject()
      {
         this->curveLegend = curveLegend;
      }


   private:

      property ChartControlAccessibleObject^ ChartControl 
      {

         // Private property that helps get the reference to the parent ChartControl.
         ChartControlAccessibleObject^ get()
         {
            return dynamic_cast<ChartControlAccessibleObject^>(Parent);
         }

      }

   internal:

      property int ID 
      {

         // Internal helper function that returns the ID for this CurveLegend.
         int get()
         {
            for ( int i = 0; i < ChartControl->GetChildCount(); i++ )
            {
               if ( ChartControl->GetChild( i ) == this )
               {
                  return i;
               }

            }
            return  -1;
         }

      }

   public:

      property Rectangle Bounds 
      {

         // Gets the Bounds for the CurveLegend. This is used by accessibility programs.
         virtual Rectangle get() override
         {
            
            // The bounds is in screen coordinates.
            Point loc = curveLegend->Location;
            return Rectangle(curveLegend->chart->PointToScreen( loc ),curveLegend->Size);
         }

      }

      property String^ Name 
      {

         // Gets or sets the Name for the CurveLegend. This is used by accessibility programs.
         virtual String^ get() override
         {
            return curveLegend->Name;
         }

         virtual void set( String^ value ) override
         {
            curveLegend->Name = value;
         }

      }

      property AccessibleObject^ Parent 
      {

         // Gets the Curve Legend Parent's Accessible object.
         // This is used by accessibility programs.
         virtual AccessibleObject^ get() override
         {
            return curveLegend->chart->AccessibilityObject;
         }

      }

      property System::Windows::Forms::AccessibleRole Role 
      {

         // Gets the role for the CurveLegend. This is used by accessibility programs.
         virtual System::Windows::Forms::AccessibleRole get() override
         {
            return ::AccessibleRole::StaticText;
         }

      }

      property AccessibleStates State 
      {

         // Gets the state based on the selection for the CurveLegend.
         // This is used by accessibility programs.
         virtual AccessibleStates get() override
         {
            AccessibleStates state = AccessibleStates::Selectable;
            if ( curveLegend->Selected )
            {
               state = static_cast<AccessibleStates>(state | AccessibleStates::Selected);
            }

            return state;
         }

      }

      // Navigates through siblings of this CurveLegend. This is used by accessibility programs.
      virtual AccessibleObject^ Navigate( AccessibleNavigation navdir ) override
      {
         
         // Uses the internal NavigateFromChild helper function that exists
         // on ChartControlAccessibleObject.
         return ChartControl->NavigateFromChild( this, navdir );
      }


      // Selects or unselects this CurveLegend. This is used by accessibility programs.
      virtual void Select( AccessibleSelection selection ) override
      {
         
         // Uses the internal SelectChild helper function that exists
         // on ChartControlAccessibleObject.
         ChartControl->SelectChild( this, selection );
      }

   };
// Inner class CurveLegendAccessibleObject represents accessible information 
// associated with the CurveLegend object.
public class CurveLegendAccessibleObject : AccessibleObject
{
    private CurveLegend curveLegend;

    public CurveLegendAccessibleObject(CurveLegend curveLegend) : base() 
    {
        this.curveLegend = curveLegend;                    
    }                

    // Private property that helps get the reference to the parent ChartControl.
    private ChartControlAccessibleObject ChartControl
    {   
        get {
            return Parent as ChartControlAccessibleObject;
        }
    }

    // Internal helper function that returns the ID for this CurveLegend.
    internal int ID
    {
        get {
            for(int i = 0; i < ChartControl.GetChildCount(); i++) {
                if (ChartControl.GetChild(i) == this) {
                    return i;
                }
            }
            return -1;
        }
    }

    // Gets the Bounds for the CurveLegend. This is used by accessibility programs.
    public override Rectangle Bounds
    {
        get {                        
            // The bounds is in screen coordinates.
            Point loc = curveLegend.Location;
            return new Rectangle(curveLegend.chart.PointToScreen(loc), curveLegend.Size);
        }
    }

    // Gets or sets the Name for the CurveLegend. This is used by accessibility programs.
    public override string Name
    {
        get {
            return curveLegend.Name;
        }
        set {
            curveLegend.Name = value;                        
        }
    }

    // Gets the Curve Legend Parent's Accessible object.
    // This is used by accessibility programs.
    public override AccessibleObject Parent
    {
        get {
            return curveLegend.chart.AccessibilityObject;
        }
    }

    // Gets the role for the CurveLegend. This is used by accessibility programs.
    public override AccessibleRole Role 
    {
        get {
            return AccessibleRole.StaticText;
        }
    }

    // Gets the state based on the selection for the CurveLegend. 
    // This is used by accessibility programs.
    public override AccessibleStates State 
    {
        get {
            AccessibleStates state = AccessibleStates.Selectable;
            if (curveLegend.Selected) 
            {
                state |= AccessibleStates.Selected;
            }
            return state;
        }
    }

    // Navigates through siblings of this CurveLegend. This is used by accessibility programs.
    public override AccessibleObject Navigate(AccessibleNavigation navdir) 
    {
        // Uses the internal NavigateFromChild helper function that exists
        // on ChartControlAccessibleObject.
        return ChartControl.NavigateFromChild(this, navdir);
    }

    // Selects or unselects this CurveLegend. This is used by accessibility programs.
    public override void Select(AccessibleSelection selection) 
    {
        // Uses the internal SelectChild helper function that exists
        // on ChartControlAccessibleObject.
        ChartControl.SelectChild(this, selection);
    }
}
' Inner class CurveLegendAccessibleObject represents accessible information 
' associated with the CurveLegend object.
Public Class CurveLegendAccessibleObject
    Inherits AccessibleObject

    Private curveLegend As CurveLegend
    
    Public Sub New(curveLegend As CurveLegend)
        Me.curveLegend = curveLegend
    End Sub
    
    ' Private property that helps get the reference to the parent ChartControl.                
    Private ReadOnly Property ChartControl() As ChartControlAccessibleObject
        Get
            Return CType(Parent, ChartControlAccessibleObject)
        End Get
    End Property

    ' Friend helper function that returns the ID for this CurveLegend.                
    Friend ReadOnly Property ID() As Integer
        Get
            Dim i As Integer
            For i = 0 To (ChartControl.GetChildCount()) - 1
                If ChartControl.GetChild(i) Is Me Then
                    Return i
                End If
            Next i
            Return - 1
        End Get
    End Property
    
    ' Gets the Bounds for the CurveLegend. This is used by accessibility programs.
    Public Overrides ReadOnly Property Bounds() As Rectangle
        Get
            ' The bounds is in screen coordinates.
            Dim loc As Point = curveLegend.Location
            Return New Rectangle(curveLegend.chart.PointToScreen(loc), curveLegend.Size)
        End Get
    End Property

    ' Gets or sets the Name for the CurveLegend. This is used by accessibility programs.                
    Public Overrides Property Name() As String
        Get
            Return curveLegend.Name
        End Get
        Set
            curveLegend.Name = value
        End Set
    End Property
    
    ' Gets the Curve Legend Parent's Accessible object.
    ' This is used by accessibility programs.                
    Public Overrides ReadOnly Property Parent() As AccessibleObject
        Get
            Return curveLegend.chart.AccessibilityObject
        End Get
    End Property
    
    ' Gets the role for the CurveLegend. This is used by accessibility programs.                
    Public Overrides ReadOnly Property Role() As AccessibleRole
        Get
            Return System.Windows.Forms.AccessibleRole.StaticText
        End Get
    End Property

    ' Gets the state based on the selection for the CurveLegend. 
    ' This is used by accessibility programs.                
    Public Overrides ReadOnly Property State() As AccessibleStates
        Get
            Dim stateTemp As AccessibleStates = AccessibleStates.Selectable
            If curveLegend.Selected Then
                stateTemp = stateTemp Or AccessibleStates.Selected
            End If
            Return stateTemp
        End Get
    End Property
    
    ' Navigates through siblings of this CurveLegend. This is used by accessibility programs.                
    Public Overrides Function Navigate(navdir As AccessibleNavigation) As AccessibleObject
        ' Use the Friend NavigateFromChild helper function that exists
        ' on ChartControlAccessibleObject.
        Return ChartControl.NavigateFromChild(Me, navdir)
    End Function
    
    ' Selects or unselects this CurveLegend. This is used by accessibility programs.
    Public Overrides Sub [Select](selection As AccessibleSelection)

        ' Use the internal SelectChild helper function that exists
        ' on ChartControlAccessibleObject.
        ChartControl.SelectChild(Me, selection)
    End Sub

End Class

Uwagi

BoundsWłaściwość pobiera prostokąt ograniczenia obiektu we współrzędnych ekranu.The Bounds property retrieves the object's bounding rectangle in screen coordinates. Jeśli obiekt ma kształt nieprostokątny, ta właściwość reprezentuje najmniejszy prostokąt, który całkowicie obejmuje cały region obiektu.If the object has a nonrectangular shape, then this property represents the smallest rectangle that completely encompasses the entire object region. W związku z tym w przypadku obiektów nieprostokątnych, takich jak elementy widoku listy, współrzędne prostokąta ograniczonego obiektu mogą kończyć się niepowodzeniem, jeśli są testowane, wywołując HitTest metodę, ponieważ HitTest określa granice obiektu na podstawie piksela według pikseli.Therefore, for nonrectangular objects such as list view items, the coordinates of the object's bounding rectangle can fail, if tested, by calling the HitTest method, because HitTest determines the object's boundaries on a pixel-by-pixel basis.

Uwagi dotyczące dziedziczenia

Domyślna implementacja zwraca prostokąt ograniczenia dostępnego obiektu, jeśli obiekt otacza formant systemowy; w przeciwnym razie zwraca Empty .The default implementation returns the accessible object's bounding rectangle if the object wraps a system control; otherwise, it returns Empty. Wszystkie widoczne dostępne obiekty muszą obsługiwać tę metodę.All visible accessible objects must support this method. Obiekty Sound nie obsługują tej metody.Sound objects do not support this method.

Dotyczy

Zobacz też