Set-CMTSStepPartitionDisk

Configure an instance of the Format and Partition Disk task sequence step.

Syntax

Set-CMTSStepPartitionDisk
   [-DiskNumber <Int32>]
   [-DiskNumberVariable <String>]
   [-DiskType <PartitionDiskStyle>]
   [-IsBootDisk <Boolean>]
   [-PartitionSetting <IResultObject[]>]
   [-AddCondition <IResultObject[]>]
   [-ClearCondition]
   [-Description <String>]
   -InputObject <IResultObject>
   [-IsContinueOnError <Boolean>]
   [-IsEnabled <Boolean>]
   [-MoveToIndex <Int32>]
   [-NewStepName <String>]
   [-RemoveConditionFile]
   [-RemoveConditionFolder]
   [-RemoveConditionIfStatement]
   [-RemoveConditionOperatingSystem]
   [-RemoveConditionQueryWmi]
   [-RemoveConditionRegistry]
   [-RemoveConditionSoftware]
   [-RemoveConditionVariable]
   [-StepName <String>]
   [-StepOrder <ReorderType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepPartitionDisk
   [-DiskNumber <Int32>]
   [-DiskNumberVariable <String>]
   [-DiskType <PartitionDiskStyle>]
   [-IsBootDisk <Boolean>]
   [-PartitionSetting <IResultObject[]>]
   [-AddCondition <IResultObject[]>]
   [-ClearCondition]
   [-Description <String>]
   [-IsContinueOnError <Boolean>]
   [-IsEnabled <Boolean>]
   [-MoveToIndex <Int32>]
   [-NewStepName <String>]
   [-RemoveConditionFile]
   [-RemoveConditionFolder]
   [-RemoveConditionIfStatement]
   [-RemoveConditionOperatingSystem]
   [-RemoveConditionQueryWmi]
   [-RemoveConditionRegistry]
   [-RemoveConditionSoftware]
   [-RemoveConditionVariable]
   [-StepName <String>]
   [-StepOrder <ReorderType>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepPartitionDisk
   [-DiskNumber <Int32>]
   [-DiskNumberVariable <String>]
   [-DiskType <PartitionDiskStyle>]
   [-IsBootDisk <Boolean>]
   [-PartitionSetting <IResultObject[]>]
   [-AddCondition <IResultObject[]>]
   [-ClearCondition]
   [-Description <String>]
   [-IsContinueOnError <Boolean>]
   [-IsEnabled <Boolean>]
   [-MoveToIndex <Int32>]
   [-NewStepName <String>]
   [-RemoveConditionFile]
   [-RemoveConditionFolder]
   [-RemoveConditionIfStatement]
   [-RemoveConditionOperatingSystem]
   [-RemoveConditionQueryWmi]
   [-RemoveConditionRegistry]
   [-RemoveConditionSoftware]
   [-RemoveConditionVariable]
   [-StepName <String>]
   [-StepOrder <ReorderType>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepPartitionDisk
   [-Condition <IResultObject[]>]
   [-SetConditionIfStatement]
   [-StatementType <ConditionStatementType>]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepPartitionDisk
   [-Condition <IResultObject[]>]
   [-SetConditionIfStatement]
   [-StatementType <ConditionStatementType>]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepPartitionDisk
   [-Condition <IResultObject[]>]
   -InputObject <IResultObject>
   [-SetConditionIfStatement]
   [-StatementType <ConditionStatementType>]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepPartitionDisk
   [-ConditionVariableName <String>]
   [-ConditionVariableValue <String>]
   [-OperatorType <VariableOperatorType>]
   [-SetConditionVariable]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepPartitionDisk
   [-ConditionVariableName <String>]
   [-ConditionVariableValue <String>]
   [-OperatorType <VariableOperatorType>]
   [-SetConditionVariable]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepPartitionDisk
   [-ConditionVariableName <String>]
   [-ConditionVariableValue <String>]
   -InputObject <IResultObject>
   [-OperatorType <VariableOperatorType>]
   [-SetConditionVariable]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepPartitionDisk
   [-FileDateTimeOperator <VariableOperatorType>]
   [-FilePath <String>]
   [-FileTimestamp <DateTime>]
   [-FileVersion <String>]
   [-SetConditionFile]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-VersionOperator <VariableOperatorType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepPartitionDisk
   [-FileDateTimeOperator <VariableOperatorType>]
   [-FilePath <String>]
   [-FileTimestamp <DateTime>]
   [-FileVersion <String>]
   [-SetConditionFile]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-VersionOperator <VariableOperatorType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepPartitionDisk
   [-FileDateTimeOperator <VariableOperatorType>]
   [-FilePath <String>]
   [-FileTimestamp <DateTime>]
   [-FileVersion <String>]
   -InputObject <IResultObject>
   [-SetConditionFile]
   [-StepName <String>]
   [-VersionOperator <VariableOperatorType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepPartitionDisk
   [-FolderDateTimeOperator <VariableOperatorType>]
   [-FolderPath <String>]
   [-FolderTimestamp <DateTime>]
   [-SetConditionFolder]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepPartitionDisk
   [-FolderDateTimeOperator <VariableOperatorType>]
   [-FolderPath <String>]
   [-FolderTimestamp <DateTime>]
   [-SetConditionFolder]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepPartitionDisk
   [-FolderDateTimeOperator <VariableOperatorType>]
   [-FolderPath <String>]
   [-FolderTimestamp <DateTime>]
   -InputObject <IResultObject>
   [-SetConditionFolder]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepPartitionDisk
   -InputObject <IResultObject>
   [-Namespace <String[]>]
   [-Query <String>]
   [-SetConditionQueryWmi]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepPartitionDisk
   -InputObject <IResultObject>
   [-SetConditionOperatingSystem]
   [-StepName <String>]
   [-SupportedPlatform <IResultObject[]>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepPartitionDisk
   -InputObject <IResultObject>
   [-RegistryKey <String>]
   [-RegistryOperator <VariableOperatorType>]
   [-RegistryValueData <String>]
   [-RegistryValueName <String>]
   [-RootKey <RegistryRootKeyType>]
   [-SetConditionRegistry]
   [-StepName <String>]
   [-ValueType <RegistryValueType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepPartitionDisk
   -InputObject <IResultObject>
   [-IsAnyVersion <Boolean>]
   [-MsiFilePath <String>]
   [-SetConditionSoftware]
   [-StepName <String>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepPartitionDisk
   [-IsAnyVersion <Boolean>]
   [-MsiFilePath <String>]
   [-SetConditionSoftware]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepPartitionDisk
   [-IsAnyVersion <Boolean>]
   [-MsiFilePath <String>]
   [-SetConditionSoftware]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepPartitionDisk
   [-Namespace <String[]>]
   [-Query <String>]
   [-SetConditionQueryWmi]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepPartitionDisk
   [-Namespace <String[]>]
   [-Query <String>]
   [-SetConditionQueryWmi]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepPartitionDisk
   [-RegistryKey <String>]
   [-RegistryOperator <VariableOperatorType>]
   [-RegistryValueData <String>]
   [-RegistryValueName <String>]
   [-RootKey <RegistryRootKeyType>]
   [-SetConditionRegistry]
   [-StepName <String>]
   -TaskSequenceId <String>
   [-ValueType <RegistryValueType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepPartitionDisk
   [-RegistryKey <String>]
   [-RegistryOperator <VariableOperatorType>]
   [-RegistryValueData <String>]
   [-RegistryValueName <String>]
   [-RootKey <RegistryRootKeyType>]
   [-SetConditionRegistry]
   [-StepName <String>]
   -TaskSequenceName <String>
   [-ValueType <RegistryValueType>]
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepPartitionDisk
   [-SetConditionOperatingSystem]
   [-StepName <String>]
   [-SupportedPlatform <IResultObject[]>]
   -TaskSequenceId <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-CMTSStepPartitionDisk
   [-SetConditionOperatingSystem]
   [-StepName <String>]
   [-SupportedPlatform <IResultObject[]>]
   -TaskSequenceName <String>
   [-DisableWildcardHandling]
   [-ForceWildcardHandling]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

Use this cmdlet to configure an instance of the Format and Partition Disk task sequence step.

For more information on this step, see About task sequence steps: Format and Partition Disk.

Note

Run Configuration Manager cmdlets from the Configuration Manager site drive, for example PS XYZ:\>. For more information, see getting started.

Examples

Example 1

This example changes the Format and Partition Disk step in the Default OS deployment task sequence to use a variable for the target disk to format.

$tsNameOsd = "Default OS deployment"
$tsStepNameFormatDisk = "Partition Disk 0 - UEFI"

Set-CMTSStepPartitionDisk -TaskSequenceName $tsNameOsd -StepName $tsStepNameFormatDisk -DiskNumberVariable "myOSDisk"

Parameters

-AddCondition

Specify a condition object to add to this step. To get this object, use one of the task sequence condition cmdlets. For example, Get-CMTSStepConditionVariable.

Type:IResultObject[]
Aliases:AddConditions
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ClearCondition

Remove a condition from this step. Use the -Condition parameter to specify the condition to remove.

Type:SwitchParameter
Aliases:ClearConditions
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Condition

Specify a condition object to use with this step. To get this object, use one of the task sequence condition cmdlets. For example, Get-CMTSStepConditionVariable.

Type:IResultObject[]
Aliases:SubCondition, SubConditions
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ConditionVariableName

Specify the name of the task sequence variable to use as a condition.

Type:String
Aliases:Variable
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ConditionVariableValue

Specify the value of the task sequence variable to use in a condition.

Type:String
Aliases:Value
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Description

Specify an optional description for this task sequence step.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-DisableWildcardHandling

This parameter treats wildcard characters as literal character values. You can't combine it with ForceWildcardHandling.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-DiskNumber

Specify an integer for the physical disk number of the disk to format. The number is based on Windows disk enumeration ordering.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-DiskNumberVariable

Applies to version 2006 and later. Use a task sequence variable to specify the target disk to format. This variable option supports more complex task sequences with dynamic behaviors. For more information, see About task sequence steps - Format and Parition Disk.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-DiskType

Specify the type of the disk to format:

  • Mbr: Master Boot Record
  • Gpt: GUID Partition Table
Type:PartitionDiskStyle
Accepted values:Mbr, Gpt
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-FileDateTimeOperator

Specify a variable operator type for a file date/time condition.

Type:VariableOperatorType
Accepted values:Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-FilePath

Specify the path for a file condition.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-FileTimestamp

Specify a date/time value to use for a file condition.

Type:DateTime
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-FileVersion

Specify a version string for a file condition.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-FolderDateTimeOperator

Specify a variable operator type for a folder date/time condition.

Type:VariableOperatorType
Accepted values:Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-FolderPath

Specify the path for a folder condition.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-FolderTimestamp

Specify a date/time value to use for a folder condition.

Type:DateTime
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ForceWildcardHandling

This parameter processes wildcard characters and may lead to unexpected behavior (not recommended). You can't combine it with DisableWildcardHandling.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-InputObject

Specify a task sequence object from which to get the Format and Partition Disk step. To get this object, use the Get-CMTaskSequence cmdlet.

Type:IResultObject
Aliases:TaskSequence
Position:Named
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-IsAnyVersion

Use this parameter with the SetConditionSoftware parameter to match any version of the product.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-IsBootDisk

For a new partition, set this parameter to true to make it the boot partition.

Type:Boolean
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-IsContinueOnError

Use this parameter to enable the step option Continue on error. When you enable this option, if the step fails, the task sequence continues.

Type:Boolean
Aliases:IsThisStepContinueOnError
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-IsEnabled

Use this parameter to enable this task sequence step.

Type:Boolean
Aliases:IsThisStepEnabled
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-MoveToIndex

Move this step to the specified index position in the task sequence.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-MsiFilePath

Specify the path to a Windows Installer file for a software condition.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Namespace

Specify the namespace for a WMI query condition.

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-NewStepName

Use this parameter to rename this task sequence step.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-OperatorType

Specify an operator to use with a task sequence variable condition.

Type:VariableOperatorType
Accepted values:Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual, Like, NotLike
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-PartitionSetting

Specify an array of partition setting objects. To get this object, use the New-CMTSPartitionSetting cmdlet.

Type:IResultObject[]
Aliases:PartitionSettings
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Query

Specify a WMI query string to use for a condition.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RegistryKey

Specify the key to use with a registry condition.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RegistryOperator

Specify an operator to use with a registry condition.

Type:VariableOperatorType
Accepted values:Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RegistryValueData

Specify the value data to use with a registry condition.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RegistryValueName

Specify the value name to use with a registry condition.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RemoveConditionFile

Use this parameter to remove a file condition.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RemoveConditionFolder

Use this parameter to remove a folder condition.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RemoveConditionIfStatement

Use this parameter to remove an if statement condition.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RemoveConditionOperatingSystem

Use this parameter to remove an OS condition.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RemoveConditionQueryWmi

Use this parameter to remove a WMI query condition.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RemoveConditionRegistry

Use this parameter to remove a registry condition.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RemoveConditionSoftware

Use this parameter to remove a software condition.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RemoveConditionVariable

Use this parameter to remove a task sequence variable condition.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-RootKey

Specify the root key to use with a registry condition.

Type:RegistryRootKeyType
Accepted values:HKeyCurrentUser, HKeyLocalMachine, HKeyUsers, HKeyCurrentConfig
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-SetConditionFile

Add a new file condition.

Type:SwitchParameter
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-SetConditionFolder

Add a new folder condition.

Type:SwitchParameter
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-SetConditionIfStatement

Add a new if statement condition.

Type:SwitchParameter
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-SetConditionOperatingSystem

Add a new OS condition.

Type:SwitchParameter
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-SetConditionQueryWmi

Add a new WMI query condition.

Type:SwitchParameter
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-SetConditionRegistry

Add a new registry condition.

Type:SwitchParameter
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-SetConditionSoftware

Add a new software condition.

Type:SwitchParameter
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-SetConditionVariable

Add a new task sequence variable condition.

Type:SwitchParameter
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-StatementType

Set the type for an if statement condition.

Type:ConditionStatementType
Aliases:Operator
Accepted values:All, Any, None
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-StepName

Specify the name of the step to select for changes.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-StepOrder

Use this parameter to reorder the step in the task sequence.

Type:ReorderType
Accepted values:MoveUp, MoveDown, MoveToIndex
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-SupportedPlatform

Use this parameter to specify the platforms for an OS condition.

Type:IResultObject[]
Aliases:SupportedPlatforms
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-TaskSequenceId

Specify the package ID of the task sequence from which to get the Format and Partition Disk step. This value is a standard package ID, for example XYZ00858.

Type:String
Aliases:Id, TaskSequencePackageId
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-TaskSequenceName

Specify the name of the task sequence to target for changes.

Type:String
Position:Named
Default value:None
Required:True
Accept pipeline input:False
Accept wildcard characters:False

-ValueType

Specify the type of value for a registry condition.

Type:RegistryValueType
Accepted values:RegistrySZ, RegistryExpandSZ, RegistryDWord
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-VersionOperator

Specify an operator to use with a file condition.

Type:VariableOperatorType
Accepted values:Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-WhatIf

Shows what would happen if the cmdlet runs. It doesn't run the cmdlet.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

Inputs

Microsoft.ConfigurationManagement.ManagementProvider.IResultObject

Outputs

System.Object