Comandos da CLI do Azure no modo do Gerenciador de RecursosAzure CLI commands in Resource Manager mode

Este artigo fornece a sintaxe e as opções de comandos da CLI (interface de linha de comando) do Azure que normalmente seriam usadas para criar e gerenciar recursos do Azure no modelo de implantação do Azure Resource Manager.This article provides syntax and options for Azure command-line interface (CLI) commands you'd commonly use to create and manage Azure resources in the Azure Resource Manager deployment model. É possível acessar esses comandos executando a CLI no modo ARM (Resource Manager).You access these commands by running the CLI in Resource Manager (arm) mode. Essa não é uma referência completa, e sua versão da CLI poderá mostrar comandos ou parâmetros um pouco diferentes.This is not a complete reference, and your CLI version may show slightly different commands or parameters. Para obter uma visão geral dos recursos e dos grupos de recursos do Azure, confira Visão geral do Azure Resource Manager.For a general overview of Azure resources and resource groups, see Azure Resource Manager Overview.

Observação

Este artigo mostra comandos no modo do Resource Manager na CLI do Azure, ocasionalmente chamada de CLI clássica do Azure.This article shows Resource Manager mode commands in the Azure CLI, sometimes called Azure classic CLI. Para trabalhar no modelo do Resource Manager, também é possível experimentar a CLI 2.0 do Azure, nossa CLI de próxima geração para várias plataformas.To work in the Resource Manager model, you can also try the Azure CLI, our next generation multi-platform CLI. Saiba mais sobre as CLIs novas e antigas do Azure.Find out more about the old and new Azure CLIs.

Para começar, primeiro instale a CLI do Azure e conecte-se à sua assinatura do Azure.To get started, first install the Azure CLI and connect to your Azure subscription.

Para ver as atuais opções e a sintaxe de comandos na linha de comando no modo do Gerenciador de Recursos, digite azure help ou, para exibir a ajuda para um comando específico, azure help [command].For current command syntax and options at the command line in Resource Manager mode, type azure help or, to display help for a specific command, azure help [command]. Também é possível encontrar exemplos da CLI na documentação de criação e gerenciamento de serviços específicos do Azure.Also find CLI examples in the documentation for creating and managing specific Azure services.

Parâmetros opcionais são mostrados entre colchetes (por exemplo, [parameter]).Optional parameters are shown in square brackets (for example, [parameter]). Todos os outros parâmetros são obrigatórios.All other parameters are required.

Além dos parâmetros opcionais específicos aos comandos documentados aqui, há três parâmetros opcionais que podem ser usados para exibir saída detalhada, como opções de solicitação e códigos de status.In addition to command-specific optional parameters documented here, there are three optional parameters that can be used to display detailed output such as request options and status codes. O parâmetro -v fornece uma saída detalhada e o parâmetro -vv fornece uma saída mais detalhada ainda.The -v parameter provides verbose output, and the -vv parameter provides even more detailed verbose output. A opção --json produzi o resultado no formato JSON bruto.The --json option outputs the result in raw json format.

Definindo o modo do Gerenciador de RecursosSetting the Resource Manager mode

Use o comando a seguir para habilitar os comandos do modo de Gerenciador de Recursos da CLI do Azure.Use the following command to enable Azure CLI Resource Manager mode commands.

azure config mode arm

Observação

O modo do Gerenciador de Recursos do Azure da CLI e o modo do Gerenciamento de Serviços do Azure são mutuamente exclusivos.The CLI's Azure Resource Manager mode and Azure Service Management mode are mutually exclusive. Ou seja, recursos criados em um modo não podem ser gerenciados no outro modo.That is, resources created in one mode cannot be managed from the other mode.

conta do Azure: Gerenciar suas informações de contaazure account: Manage your account information

As informações da assinatura do Azure são utilizadas pela ferramenta para se conectar à sua conta.Your Azure subscription information is used by the tool to connect to your account.

Lista as assinaturas importadasList the imported subscriptions

account list [options]

Mostra detalhes sobre uma assinaturaShow details about a subscription

account show [options] [subscriptionNameOrId]

Define a assinatura atualSet the current subscription

account set [options] <subscriptionNameOrId>

Remove uma assinatura ou ambiente ou desmarcar todas as informações de conta e ambiente armazenadaRemove a subscription or environment, or clear all of the stored account and environment info

account clear [options]

Comandos para gerenciar seu ambiente de contaCommands to manage your account environment

account env list [options]
account env show [options] [environment]
account env add [options] [environment]
account env set [options] [environment]
account env delete [options] [environment]

ad do Azure: Comandos para exibir objetos do Active Directoryazure ad: Commands to display Active Directory objects

Comandos para exibir aplicativos do active directoryCommands to display active directory applications

ad app create [options]
ad app delete [options] <object-id>

Comandos para exibir grupos do active directoryCommands to display active directory groups

ad group list [options]
ad group show [options]

Comandos para fornecer uma informação de sobre um subgrupo ou membro do active directoryCommands to provide an active directory sub group or member info

ad group member list [options] [objectId]

Comandos para exibir entidades de serviço do active directoryCommands to display active directory service principals

ad sp list [options]
ad sp show [options]
ad sp create [options] <application-id>
ad sp delete [options] <object-id>

Comandos para exibir usuários do active directoryCommands to display active directory users

ad user list [options]
ad user show [options]

azure availset: comandos para gerenciar seus conjuntos de disponibilidadeazure availset: commands to manage your availability sets

Cria um conjunto de disponibilidade dentro de um grupo de recursosCreates an availability set within a resource group

availset create [options] <resource-group> <name> <location> [tags]

Lista os conjuntos de disponibilidade dentro de um grupo de recursosLists the availability sets within a resource group

availset list [options] <resource-group>

Obtém um conjunto de disponibilidade dentro de um grupo de recursosGets one availability set within a resource group

availset show [options] <resource-group> <name>

Exclui um conjunto de disponibilidade dentro de um grupo de recursosDeletes one availability set within a resource group

availset delete [options] <resource-group> <name>

azure config: comandos para gerenciar suas configurações locaisazure config: commands to manage your local settings

Lista definições de configuração de CLI do AzureList Azure CLI configuration settings

config list [options]

Exclui uma definição de configuraçãoDelete a config setting

config delete [options] <name>

Atualiza uma definição de configuraçãoUpdate a config setting

config set <name> <value>

Define o modo de funcionamento da CLI do Azure como arm ou asmSets the Azure CLI working mode to either arm or asm

config mode [options] <modename>

azure feature: comandos para gerenciar recursos da contaazure feature: commands to manage account features

Lista todos os recursos disponíveis para sua assinaturaList all features available for your subscription

feature list [options]

Mostra um recursoShows a feature

feature show [options] <providerName> <featureName>

Registra um recurso visualizado de um provedor de recursosRegisters a previewed feature of a resource provider

feature register [options] <providerName> <featureName>

grupo do Azure: Comandos para gerenciar os grupos de recursosazure group: Commands to manage your resource groups

Crie um grupos de recursosCreates a resource group

group create [options] <name> <location>

Define marcas para um grupo de recursosSet tags to a resource group

group set [options] <name> <tags>

Exclui um grupo de recursosDeletes a resource group

group delete [options] <name>

Lista os grupos de recursos para sua assinaturaLists the resource groups for your subscription

group list [options]

Mostra um grupo de recursos para sua assinaturaShows a resource group for your subscription

group show [options] <name>

Comandos para gerenciar logs de grupo de recursosCommands to manage resource group logs

group log show [options] [name]

Comandos para gerenciar a implantação em um grupo de recursosCommands to manage your deployment in a resource group

group deployment create [options] [resource-group] [name]
group deployment list [options] <resource-group> [state]
group deployment show [options] <resource-group> [deployment-name]
group deployment stop [options] <resource-group> [deployment-name]

Comandos para gerenciar o modelo de grupo de recurso local ou galeriaCommands to manage your local or gallery resource group template

group template list [options]
group template show [options] <name>
group template download [options] [name] [file]
group template validate [options] <resource-group>

azure hdinsight: Comandos para gerenciar os clusters do HDInsightazure hdinsight: Commands to manage your HDInsight clusters

Comandos para criar ou adicionar a um arquivo de configuração de clusterCommands to create or add to a cluster configuration file

hdinsight config create [options] <configFilePath> <overwrite>
hdinsight config add-config-values [options] <configFilePath>
hdinsight config add-script-action [options] <configFilePath>

Exemplo: Crie um arquivo de configuração que contém uma ação de script para ser executada durante a criação de um cluster.Example: Create a configuration file that contains a script action to run when creating a cluster.

hdinsight config create "C:\myFiles\configFile.config"
hdinsight config add-script-action --configFilePath "C:\myFiles\configFile.config" --nodeType HeadNode --uri <scriptActionURI> --name myScriptAction --parameters "-param value"

Comando para criar um cluster em um grupo de recursosCommand to create a cluster in a resource group

hdinsight cluster create [options] <clusterName>

Exemplo: Criar um Storm no cluster do LinuxExample: Create a Storm on Linux cluster

azure hdinsight cluster create -g myarmgroup -l westus -y Linux --clusterType Storm --version 3.2 --defaultStorageAccountName mystorageaccount --defaultStorageAccountKey <defaultStorageAccountKey> --defaultStorageContainer mycontainer --userName admin --password <clusterPassword> --sshUserName sshuser --sshPassword <sshPassword> --workerNodeCount 1 myNewCluster01

info:    Executing command hdinsight cluster create
+ Submitting the request to create cluster...
info:    hdinsight cluster create command OK

Exemplo: Criar um cluster com uma ação de scriptExample: Create a cluster with a script action

azure hdinsight cluster create -g myarmgroup -l westus -y Linux --clusterType Hadoop --version 3.2 --defaultStorageAccountName mystorageaccount --defaultStorageAccountKey <defaultStorageAccountKey> --defaultStorageContainer mycontainer --userName admin --password <clusterPassword> --sshUserName sshuser --sshPassword <sshPassword> --workerNodeCount 1 –configurationPath "C:\myFiles\configFile.config" myNewCluster01

info:    Executing command hdinsight cluster create
+ Submitting the request to create cluster...
info:    hdinsight cluster create command OK

Opções de parâmetro:Parameter options:

-h, --help                                                 output usage information
-v, --verbose                                              use verbose output
-vv                                                        more verbose with debug output
--json                                                     use json output
-g --resource-group <resource-group>                       The name of the resource group
-c, --clusterName <clusterName>                            HDInsight cluster name
-l, --location <location>                                  Data center location for the cluster
-y, --osType <osType>                                      HDInsight cluster operating system
'Windows' or 'Linux'
--version <version>                                        HDInsight cluster version
--clusterType <clusterType>                                HDInsight cluster type.
Hadoop | HBase | Spark | Storm
--defaultStorageAccountName <storageAccountName>           Storage account url to use for default HDInsight storage
--defaultStorageAccountKey <storageAccountKey>             Key to the storage account to use for default HDInsight storage
--defaultStorageContainer <storageContainer>               Container in the storage account to use for HDInsight default storage
--headNodeSize <headNodeSize>                              (Optional) Head node size for the cluster
--workerNodeCount <workerNodeCount>                        Number of worker nodes to use for the cluster
--workerNodeSize <workerNodeSize>                          (Optional) Worker node size for the cluster)
--zookeeperNodeSize <zookeeperNodeSize>                    (Optional) Zookeeper node size for the cluster
--userName <userName>                                      Cluster username
--password <password>                                      Cluster password
--sshUserName <sshUserName>                                SSH username (only for Linux clusters)
--sshPassword <sshPassword>                                SSH password (only for Linux clusters)
--sshPublicKey <sshPublicKey>                              SSH public key (only for Linux clusters)
--rdpUserName <rdpUserName>                                RDP username (only for Windows clusters)
--rdpPassword <rdpPassword>                                RDP password (only for Windows clusters)
--rdpAccessExpiry <rdpAccessExpiry>                        RDP access expiry.
For example 12/12/2015 (only for Windows clusters)
--virtualNetworkId <virtualNetworkId>                      (Optional) Virtual network ID for the cluster.
Value is a GUID for Windows cluster and ARM resource ID for Linux cluster)
--subnetName <subnetName>                                  (Optional) Subnet for the cluster
--additionalStorageAccounts <additionalStorageAccounts>    (Optional) Additional storage accounts.
Can be multiple.
In the format of 'accountName#accountKey'.
For example, --additionalStorageAccounts "acc1#key1;acc2#key2"
--hiveMetastoreServerName <hiveMetastoreServerName>        (Optional) SQL Server name for the external metastore for Hive
--hiveMetastoreDatabaseName <hiveMetastoreDatabaseName>    (Optional) Database name for the external metastore for Hive
--hiveMetastoreUserName <hiveMetastoreUserName>            (Optional) Database username for the external metastore for Hive
--hiveMetastorePassword <hiveMetastorePassword>            (Optional) Database password for the external metastore for Hive
--oozieMetastoreServerName <oozieMetastoreServerName>      (Optional) SQL Server name for the external metastore for Oozie
--oozieMetastoreDatabaseName <oozieMetastoreDatabaseName>  (Optional) Database name for the external metastore for Oozie
--oozieMetastoreUserName <oozieMetastoreUserName>          (Optional) Database username for the external metastore for Oozie
--oozieMetastorePassword <oozieMetastorePassword>          (Optional) Database password for the external metastore for Oozie
--configurationPath <configurationPath>                    (Optional) HDInsight cluster configuration file path
-s, --subscription <id>                                    The subscription id
--tags <tags>                                              Tags to set to the cluster.
Can be multiple.
In the format of 'name=value'.
Name is required and value is optional.
For example, --tags tag1=value1;tag2

Comando para excluir um clusterCommand to delete a cluster

hdinsight cluster delete [options] <clusterName>

Comando para mostrar detalhes do clusterCommand to show cluster details

hdinsight cluster show [options] <clusterName>

Comando para listar todos os clusters (em um grupo de recursos específico, se fornecido)Command to list all clusters (in a specific resource group, if provided)

hdinsight cluster list [options]

Comando para redimensionar um clusterCommand to resize a cluster

hdinsight cluster resize [options] <clusterName> <targetInstanceCount>

Comando para habilitar o acesso HTTP a um clusterCommand to enable HTTP access for a cluster

hdinsight cluster enable-http-access [options] <clusterName> <userName> <password>

Comando para desabilitar o acesso HTTP a um clusterCommand to disable HTTP access for a cluster

hdinsight cluster disable-http-access [options] <clusterName>

Comando para habilitar o acesso RDP a um clusterCommand to enable RDP access for a cluster

hdinsight cluster enable-rdp-access [options] <clusterName> <rdpUserName> <rdpPassword> <rdpExpiryDate>

Comando para desabilitar o acesso HTTP a um clusterCommand to disable HTTP access for a cluster

hdinsight cluster disable-rdp-access [options] <clusterName>

Recupera os logs de operação para uma assinatura, uma correlationId, um grupo de recursos, o recurso ou o provedor de recursosRetrieve operation logs for a subscription, a correlationId, a resource group, resource, or resource provider

insights logs list [options]

local do Azure: Comandos para obter os locais disponíveis para todos os tipos de recursosazure location: Commands to get the available locations for all resource types

Lista os locais disponíveisList the available locations

location list [options]

rede do Azure: Comandos para gerenciar recursos de redeazure network: Commands to manage network resources

Comandos para gerenciar redes virtuaisCommands to manage virtual networks

network vnet create [options] <resource-group> <name> <location>

Cria uma rede virtual.Creates a virtual network. No exemplo a seguir, criamos uma rede virtual denominada newvnet para o grupo de recursos myresourcegroup na região Oeste dos EUA.In the following example we create a virtual network named newvnet for resource group myresourcegroup in the West US region.

azure network vnet create myresourcegroup newvnet "west us"
info:    Executing command network vnet create
+ Looking up virtual network "newvnet"
+ Creating virtual network "newvnet"
 Loading virtual network state
data:    Id:                   /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet
data:    Name:                 newvnet
data:    Type:                 Microsoft.Network/virtualNetworks
data:    Location:             westus
data:    Tags:
data:    Provisioning state:   Succeeded
data:    Address prefixes:
data:     10.0.0.0/8
data:    DNS servers:
data:    Subnets:
data:
info:    network vnet create command OK

Opções de parâmetro:Parameter options:

 -h, --help                                 output usage information
 -v, --verbose                              use verbose output
--json                                     use json output
 -g, --resource-group <resource-group>      the name of the resource group
 -n, --name <name>                          the name of the virtual network
 -l, --location <location>                  the location
 -a, --address-prefixes <address-prefixes>  the comma separated list of address prefixes for this virtual network
  For example -a 10.0.0.0/24,10.0.1.0/24.
  Default value is 10.0.0.0/8

-d, --dns-servers <dns-servers>            the comma separated list of DNS servers IP addresses
 -t, --tags <tags>                          the tags set on this virtual network.
  Can be multiple. In the format of "name=value".
  Name is required and value is optional.
  For example, -t tag1=value1;tag2
 -s, --subscription <subscription>          the subscription identifier

network vnet set [options] <resource-group> <name>

Atualiza uma configuração de rede virtual dentro de um grupo de recursos.Updates a virtual network configuration within a resource group.

azure network vnet set myresourcegroup newvnet

info:    Executing command network vnet set
+ Looking up virtual network "newvnet"
+ Updating virtual network "newvnet"
+ Loading virtual network state
data:    Id:                   /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet
data:    Name:                 newvnet
data:    Type:                 Microsoft.Network/virtualNetworks
data:    Location:             westus
data:    Tags:
data:    Provisioning state:   Succeeded
data:    Address prefixes:
data:     10.0.0.0/8
data:    DNS servers:
data:    Subnets:
data:
info:    network vnet set command OK

Opções de parâmetro:Parameter options:

   -h, --help                                 output usage information
   -v, --verbose                              use verbose output
   --json                                     use json output
   -g, --resource-group <resource-group>      the name of the resource group
   -n, --name <name>                          the name of the virtual network
   -a, --address-prefixes <address-prefixes>  the comma separated list of address prefixes for this virtual network.
    For example -a 10.0.0.0/24,10.0.1.0/24.
    This list will be appended to the current list of address prefixes.
    The address prefixes in this list should not overlap between them.
    The address prefixes in this list should not overlap with existing address prefixes in the vnet.

   -d, --dns-servers [dns-servers]            the comma separated list of DNS servers IP addresses.
    This list will be appended to the current list of DNS server IP addresses.

   -t, --tags <tags>                          the tags set on this virtual network.
    Can be multiple. In the format of "name=value".
    Name is required and value is optional. For example, -t tag1=value1;tag2.
    This list will be appended to the current list of tags

   --no-tags                                  remove all existing tags
   -s, --subscription <subscription>          the subscription identifier

network vnet list [options] <resource-group>

O comando lista todas as redes virtuais em um grupo de recursos.The command lists all virtual networks in a resource group.

C:\>azure network vnet list myresourcegroup

info:    Executing command network vnet list
+ Listing virtual networks
    data:    ID
   Name      Location  Address prefixes  DNS servers
data:    -------------------------------------------------------------------
------  --------  --------  ----------------  -----------
data:    /subscriptions/###############################/resourceGroups/
wvnet   newvnet   westus    10.0.0.0/8
info:    network vnet list command OK

Opções de parâmetro:Parameter options:

  -h, --help                             output usage information
  -v, --verbose                          use verbose output
  --json                                 use json output
  -g, --resource-group <resource-group>  the name of the resource group
  -s, --subscription <subscription>      the subscription identifier

network vnet show [options] <resource-group> <name>

O comando mostra as propriedades de rede virtual em um grupo de recursos.The command shows the virtual network properties in a resource group.

azure network vnet show -g myresourcegroup -n newvnet

info:    Executing command network vnet show
+ Looking up virtual network "newvnet"
data:    Id:                   /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet
data:    Name:                 newvnet
data:    Type:                 Microsoft.Network/virtualNetworks
data:    Location:             westus
data:    Tags:
data:    Provisioning state:   Succeeded
data:    Address prefixes:
data:     10.0.0.0/8
data:    DNS servers:
data:    Subnets:
data:
info:    network vnet show command OK

network vnet delete [options] <resource-group> <name>

O comando remove uma rede virtual.The command removes a virtual network.

azure network vnet delete myresourcegroup newvnetX

info:    Executing command network vnet delete
+ Looking up virtual network "newvnetX"
Delete virtual network newvnetX? [y/n] y
+ Deleting virtual network "newvnetX"
info:    network vnet delete command OK

Opções de parâmetro:Parameter options:

 -h, --help                             output usage information
 -v, --verbose                          use verbose output
 --json                                 use json output
 -g, --resource-group <resource-group>  the name of the resource group
 -n, --name <name>                      the name of the virtual network
 -q, --quiet                            quiet mode, do not ask for delete confirmation
 -s, --subscription <subscription>      the subscription identifier

Comandos para gerenciar sub-redes de redes virtuaisCommands to manage virtual network subnets

network vnet subnet create [options] <resource-group> <vnet-name> <name>

Adiciona outra sub-rede para uma rede virtual existente.Adds another subnet to an existing virtual network.

azure network vnet subnet create -g myresourcegroup --vnet-name newvnet -n subnet --address-prefix 10.0.1.0/24

info:    Executing command network vnet subnet create
+ Looking up the subnet "subnet"
+ Creating subnet "subnet"
+ Looking up the subnet "subnet"
data:    Id:                        /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet/subnets/subnet
data:    Name:                      subnet
data:    Type:                      Microsoft.Network/virtualNetworks/subnets
data:    Provisioning state:        Succeeded
data:    Address prefix:            10.0.1.0/24
info:    network vnet subnet create command OK

Opções de parâmetro:Parameter options:

 -h, --help                                                       output usage information
 -v, --verbose                                                    use verbose output
     --json                                                           use json output
 -g, --resource-group <resource-group>                            the name of the resource group
 -e, --vnet-name <vnet-name>                                      the name of the virtual network
 -n, --name <name>                                                the name of the subnet
 -a, --address-prefix <address-prefix>                            the address prefix
 -w, --network-security-group-id <network-security-group-id>      the network security group identifier.
       e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/networkSecurityGroups/<nsg-name>
 -o, --network-security-group-name <network-security-group-name>  the network security group name
 -s, --subscription <subscription>                                the subscription identifier

network vnet subnet set [options] <resource-group> <vnet-name> <name>

Define uma sub-rede de rede virtual específica dentro de um grupo de recursos.Sets a specific virtual network subnet within a resource group.

C:\>azure network vnet subnet set -g myresourcegroup --vnet-name newvnet -n subnet1

info:    Executing command network vnet subnet set
+ Looking up the subnet "subnet1"
+ Setting subnet "subnet1"
+ Looking up the subnet "subnet1"
data:    Id:                        /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet/subnets/subnet1
data:    Name:                      subnet1
data:    Type:                      Microsoft.Network/virtualNetworks/subnets
data:    Provisioning state:        Succeeded
data:    Address prefix:            10.0.1.0/24
info:    network vnet subnet set command OK

network vnet subnet list [options] <resource-group> <vnet-name>

Lista todas as sub-redes de rede virtual para uma rede virtual específica dentro de um grupo de recursos.Lists all the virtual network subnets for a specific virtual network within a resource group.

azure network vnet subnet set -g myresourcegroup --vnet-name newvnet -n subnet1

info:    Executing command network vnet subnet set
+ Looking up the subnet "subnet1"
+ Setting subnet "subnet1"
+ Looking up the subnet "subnet1"
data:    Id:                        /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet/subnets/subnet1
data:    Name:                      subnet1
data:    Type:                      Microsoft.Network/virtualNetworks/subnets
data:    Provisioning state:        Succeeded
data:    Address prefix:            10.0.1.0/24
info:    network vnet subnet set command OK

network vnet subnet show [options] <resource-group> <vnet-name> <name>

Exibe as propriedades de sub-rede da rede virtualDisplays virtual network subnet properties

azure network vnet subnet show -g myresourcegroup --vnet-name newvnet -n subnet1

info:    Executing command network vnet subnet show
+ Looking up the subnet "subnet1"
data:    Id:                        /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft
.Network/virtualNetworks/newvnet/subnets/subnet1
data:    Name:                      subnet1
data:    Type:                      Microsoft.Network/virtualNetworks/subnets
data:    Provisioning state:        Succeeded
data:    Address prefix:            10.0.1.0/24
info:    network vnet subnet show command OK

Opções de parâmetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-e, --vnet-name <vnet-name>            the name of the virtual network
-n, --name <name>                      the name of the subnet
-s, --subscription <subscription>      the subscription identifier

network vnet subnet delete [options] <resource-group> <vnet-name> <subnet-name>

Remove uma sub-rede de uma rede virtual existente.Removes a subnet from an existing virtual network.

azure network vnet subnet delete -g myresourcegroup --vnet-name newvnet -n subnet1

info:    Executing command network vnet subnet delete
+ Looking up the subnet "subnet1"
Delete subnet "subnet1"? [y/n] y
+ Deleting subnet "subnet1"
info:    network vnet subnet delete command OK

Opções de parâmetro:Parameter options:

 -h, --help                             output usage information
 -v, --verbose                          use verbose output
 --json                                 use json output
 -g, --resource-group <resource-group>  the name of the resource group
 -e, --vnet-name <vnet-name>            the name of the virtual network
 -n, --name <name>                      the subnet name
 -s, --subscription <subscription>      the subscription identifier
 -q, --quiet                            quiet mode, do not ask for delete confirmation

Comandos para gerenciar os balanceadores de cargaCommands to manage load balancers

network lb create [options] <resource-group> <name> <location>

Cria um conjunto de balanceadores de carga.Creates a load balancer set.

azure network lb create -g myresourcegroup -n mylb -l westus

info:    Executing command network lb create
+ Looking up the load balancer "mylb"
+ Creating load balancer "mylb"
+ Looking up the load balancer "mylb"
data:    Id:                           /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb
data:    Name:                         mylb
data:    Type:                         Microsoft.Network/loadBalancers
data:    Location:                     westus
data:    Provisioning state:           Succeeded
info:    network lb create command OK

Opções de parâmetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-n, --name <name>                      the name of the load balancer
-l, --location <location>              the location
-t, --tags <tags>                      the list of tags.
 Can be multiple. In the format of "name=value".
 Name is required and value is optional. For example, -t tag1=value1;tag2
-s, --subscription <subscription>      the subscription identifier

network lb list [options] <resource-group>

Lista os recursos do balanceador de carga dentro de um grupo de recursos.Lists Load balancer resources within a resource group.

azure network lb list myresourcegroup

info:    Executing command network lb list
+ Getting the load balancers
data:    Name  Location
data:    ----  --------
data:    mylb  westus
info:    network lb list command OK

Opções de parâmetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-s, --subscription <subscription>      the subscription identifier

network lb show [options] <resource-group> <name>

Exibe informações do balanceador de carga de um balanceador de carga específico dentro de um grupo de recursosDisplays load balancer information of a specific load balancer within a resource group

azure network lb show myresourcegroup mylb -v

info:    Executing command network lb show
verbose: Looking up the load balancer "mylb"
data:    Id:                           /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb
data:    Name:                         mylb
data:    Type:                         Microsoft.Network/loadBalancers
data:    Location:                     westus
data:    Provisioning state:           Succeeded
info:    network lb show command OK

Opções de parâmetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-n, --name <name>                      the name of the load balancer
-s, --subscription <subscription>      the subscription identifier

network lb delete [options] <resource-group> <name>

Exclui recursos do balanceador de carga.Delete load balancer resources.

azure network lb delete  myresourcegroup mylb

info:    Executing command network lb delete
+ Looking up the load balancer "mylb"
Delete load balancer "mylb"? [y/n] y
+ Deleting load balancer "mylb"
info:    network lb delete command OK

Opções de parâmetro:Parameter options:

 -h, --help                             output usage information
 -v, --verbose                          use verbose output
 --json                                 use json output
 -g, --resource-group <resource-group>  the name of the resource group
 -n, --name <name>                      the name of the load balancer
 -q, --quiet                            quiet mode, do not ask for delete confirmation
 -s, --subscription <subscription>      the subscription identifier

Comandos para gerenciar testes de um balanceador de cargaCommands to manage probes of a load balancer

network lb probe create [options] <resource-group> <lb-name> <name>

Crie a configuração de teste para o status de integridade no balanceador de carga.Create the probe configuration for health status in the load balancer. Lembre-se de executar esse comando, o balanceador de carga requer um recurso de ip front-end (Check-out de comando "azure rede ip front-end" para atribuir um endereço ip ao balanceador de carga).Keep in mind to run this command, your load balancer requires a frontend-ip resource (Check out command "azure network frontend-ip" to assign an ip address to load balancer).

azure network lb probe create -g myresourcegroup --lb-name mylb -n mylbprobe --protocol tcp --port 80 -i 300

info:    Executing command network lb probe create
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
info:    network lb probe create command OK

Opções de parâmetro:Parameter options:

 -h, --help                             output usage information
 -v, --verbose                          use verbose output
 --json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-l, --lb-name <lb-name>                the name of the load balancer
-n, --name <name>                      the name of the probe
-p, --protocol <protocol>              the probe protocol
-o, --port <port>                      the probe port
-f, --path <path>                      the probe path
-i, --interval <interval>              the probe interval in seconds
-c, --count <count>                    the number of probes
-s, --subscription <subscription>      the subscription identifier

network lb probe set [options] <resource-group> <lb-name> <name>

Atualiza uma investigação do balanceador de carga existente com novos valores para o mesmo.Updates an existing load balancer probe with new values for it.

azure network lb probe set -g myresourcegroup -l mylb -n mylbprobe -p mylbprobe1 -p TCP -o 443 -i 300

info:    Executing command network lb probe set
    + Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
info:    network lb probe set command OK

Opções de parâmetroParameter options

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-l, --lb-name <lb-name>                the name of the load balancer
-n, --name <name>                      the name of the probe
-e, --new-probe-name <new-probe-name>  the new name of the probe
-p, --protocol <protocol>              the new value for probe protocol
-o, --port <port>                      the new value for probe port
-f, --path <path>                      the new value for probe path
-i, --interval <interval>              the new value for probe interval in seconds
-c, --count <count>                    the new value for number of probes
-s, --subscription <subscription>      the subscription identifier

network lb probe list [options] <resource-group> <lb-name>

Lista as propriedades de teste para um conjunto de balanceadores de carga.List the probe properties for a load balancer set.

C:\>azure network lb probe list -g myresourcegroup -l mylb

info:    Executing command network lb probe list
+ Looking up the load balancer "mylb"
data:    Name       Protocol  Port  Path  Interval  Count
data:    ---------  --------  ----  ----  --------  -----
data:    mylbprobe  Tcp       443         300       2
info:    network lb probe list command OK

Opções de parâmetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-l, --lb-name <lb-name>                the name of the load balancer
-s, --subscription <subscription>      the subscription identifier


network lb probe delete [options] <resource-group> <lb-name> <name>

Remove o teste criado para o balanceador de carga.Removes the probe created for the load balancer.

azure network lb probe delete -g myresourcegroup -l mylb -n mylbprobe

info:    Executing command network lb probe delete
+ Looking up the load balancer "mylb"
Delete a probe "mylbprobe?" [y/n] y
+ Updating load balancer "mylb"
info:    network lb probe delete command OK

Comandos para gerenciar as configurações de ip de front-end de um balanceador de cargaCommands to manage frontend ip configurations of a load balancer

network lb frontend-ip create [options] <resource-group> <lb-name> <name>

Cria uma configuração de IP de front-end para um conjunto existente de balanceadores de carga.Creates a frontend IP configuration to an existing load balancer set.

azure network lb frontend-ip create -g myresourcegroup --lb-name mylb -n myfrontendip -o Dynamic -e subnet -m newvnet

info:    Executing command network lb frontend-ip create
+ Looking up the load balancer "mylb"
+ Looking up the subnet "subnet"
+ Creating frontend IP configuration "myfrontendip"
+ Looking up the load balancer "mylb"
data:    Id:                           /subscriptions/###############################/resourceGroups/Myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb
/frontendIPConfigurations/myfrontendip
data:    Name:                         myfrontendip
data:    Type:                         Microsoft.Network/loadBalancers/frontendIPConfigurations
data:    Provisioning state:           Succeeded
data:    Private IP allocation method: Dynamic
data:    Private IP address:           10.0.1.4
data:    Subnet:                       id=/subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet/subnets/subnet
data:    Public IP address:
data:    Inbound NAT rules
data:    Outbound NAT rules
data:    Load balancing rules
data:
info:    network lb frontend-ip create command OK

network lb frontend-ip set [options] <resource-group> <lb-name> <name>

Atualiza uma configuração existente de um IP front-end. O comando a seguir adiciona um IP público chamado mypubip5 para um IP de front-end de balanceador carga existente chamado myfrontendip.Updates an existing configuration of a frontend IP.The command below adds a public IP called mypubip5 to an existing load balancer frontend IP named myfrontendip.

azure network lb frontend-ip set -g myresourcegroup --lb-name mylb -n myfrontendip -i mypubip5

info:    Executing command network lb frontend-ip set
+ Looking up the load balancer "mylb"
+ Looking up the public ip "mypubip5"
+ Updating load balancer "mylb"
+ Looking up the load balancer "mylb"
data:    Id:                           /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/frontendIPConfigurations/myfrontendip
data:    Name:                         myfrontendip
data:    Type:                         Microsoft.Network/loadBalancers/frontendIPConfigurations
data:    Provisioning state:           Succeeded
data:    Private IP allocation method: Dynamic
data:    Private IP address:
data:    Subnet:
data:    Public IP address:            id=/subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/publicIPAddresses/mypubip5
data:    Inbound NAT rules
data:    Outbound NAT rules
data:    Load balancing rules
data:
info:    network lb frontend-ip set command OK

Opções de parâmetro:Parameter options:

-h, --help                                                         output usage information
-v, --verbose                                                      use verbose output
--json                                                             use json output
-g, --resource-group <resource-group>                              the name of the resource group
-l, --lb-name <lb-name>                                            the name of the load balancer
-n, --name <name>                                                  the name of the frontend ip configuration
-a, --private-ip-address <private-ip-address>                      the private ip address
-o, --private-ip-allocation-method <private-ip-allocation-method>  the private ip allocation method [Static, Dynamic]
-u, --public-ip-id <public-ip-id>                                  the public ip identifier.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/publicIPAddresses/<public-ip-name>
-i, --public-ip-name <public-ip-name>                              the public ip name.
This public ip must exist in the same resource group as the lb.
Please use public-ip-id if that is not the case.
-b, --subnet-id <subnet-id>                                        the subnet id.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/VirtualNetworks/<vnet-name>/subnets/<subnet-name>
-e, --subnet-name <subnet-name>                                    the subnet name
-m, --vnet-name <vnet-name>                                        the virtual network name.
This virtual network must exist in the same resource group as the lb.
Please use subnet-id if that is not the case.
-s, --subscription <subscription>                                  the subscription identifier

network lb frontend-ip list [options] <resource-group> <lb-name>

Lista todos os recursos IP front-end configurados para o balanceador de carga.Lists all the frontend IP resources configured for the load balancer.

azure network lb frontend-ip list -g myresourcegroup -l mylb

info:    Executing command network lb frontend-ip list
+ Looking up the load balancer "mylb"
data:    Name         Provisioning state  Private IP allocation method  Subnet
data:    -----------  ------------------  ----------------------------  ------
data:    myprivateip  Succeeded           Dynamic
info:    network lb frontend-ip list command OK

Opções de parâmetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-l, --lb-name <lb-name>                the name of the load balancer
-s, --subscription <subscription>      the subscription identifier

network lb frontend-ip delete [options] <resource-group> <lb-name> <name>

Exclui o objeto IP de front-end associado ao balanceador de cargaDeletes the frontend IP object associated to load balancer

network lb frontend-ip delete -g myresourcegroup -l mylb -n myfrontendip
info:    Executing command network lb frontend-ip delete
+ Looking up the load balancer "mylb"
Delete frontend ip configuration "myfrontendip"? [y/n] y
+ Updating load balancer "mylb"

Opções de parâmetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-l, --lb-name <lb-name>                the name of the load balancer
-n, --name <name>                      the name of the frontend ip configuration
-q, --quiet                            quiet mode, do not ask for delete confirmation
-s, --subscription <subscription>      the subscription identifier

Comandos para gerenciar pools de endereços de back-end de um balanceador de cargaCommands to manage backend address pools of a load balancer

network lb address-pool create [options] <resource-group> <lb-name> <name>

Cria um pool de endereços de back-end para um balanceador de carga.Create a backend address pool for a load balancer.

azure network lb address-pool create -g myresourcegroup --lb-name mylb -n myaddresspool

info:    Executing command network lb address-pool create
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
+ Looking up the load balancer "mylb"
data:    Id:                        /subscriptions/###############################/resourceGroups/myresourgroup/providers/Microso.Network/loadBalancers/mylb/backendAddressPools/myaddresspool
data:    Name:                      myaddresspool
data:    Type:                      Microsoft.Network/loadBalancers/backendAddressPools
data:    Provisioning state:        Succeeded
data:    Backend IP configurations:
data:    Load balancing rules:
data:
info:    network lb address-pool create command OK

Opções de parâmetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-l, --lb-name <lb-name>                the name of the load balancer
-n, --name <name>                      the name of the backend address pool
-s, --subscription <subscription>      the subscription identifier

network lb address-pool list [options] <resource-group> <lb-name>

Lista o intervalo de pool de endereços IP de back-end para um grupo de recursos específicosList backend IP address pool range for a specific resource group

azure network lb address-pool list -g myresourcegroup -l mylb

info:    Executing command network lb address-pool list
+ Looking up the load balancer "mylb"
data:    Name           Provisioning state
data:    -------------  ------------------
data:    mybackendpool  Succeeded
info:    network lb address-pool list command OK

Opções de parâmetro:Parameter options:

 -h, --help                             output usage information
 -v, --verbose                          use verbose output
 --json                                 use json output
 -g, --resource-group <resource-group>  the name of the resource group
 -l, --lb-name <lb-name>                the name of the load balancer
 -s, --subscription <subscription>      the subscription identifier

network lb address-pool delete [options] <resource-group> <lb-name> <name>

Remove o recurso de intervalo de pool de IP de back-end do balanceador de carga.Removes the backend IP pool range resource from load balancer.

azure network lb address-pool delete -g myresourcegroup -l mylb -n mybackendpool

info:    Executing command network lb address-pool delete
+ Looking up the load balancer "mylb"
Delete backend address pool "mybackendpool"? [y/n] y
+ Updating load balancer "mylb"
info:    network lb address-pool delete command OK

Opções de parâmetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-l, --lb-name <lb-name>                the name of the load balancer
-n, --name <name>                      the name of the backend address pool
-q, --quiet                            quiet mode, do not ask for delete confirmation
-s, --subscription <subscription>      the subscription identifier

Comandos para gerenciar as regras dos balanceadores de cargaCommands to manage load balancer rules

network lb rule create [options] <resource-group> <lb-name> <name>

Crie regras para o balanceador de carga.Create load balancer rules.

Você pode criar uma regra para o balanceador de carga configurando o ponto de extremidade de front-end para o balanceador de carga e o intervalo de pool de endereços de back-end para receber o tráfego de rede de entrada.You can create a load balancer rule configuring the frontend endpoint for the load balancer and the backend address pool range to receive the incoming network traffic. As configurações também incluem as portas para o ponto de extremidade do IP de front-end e as portas para o intervalo de pool de endereços de back-end.Settings also include the ports for frontend IP endpoint and ports for the backend address pool range.

O exemplo a seguir mostra como criar uma regra para o balanceador de carga, o ponto de extremidade do front-end escutando a porta TCP 80 e o tráfego de rede do balanceamento de carga enviando para a porta 8080 para o intervalo de pool de endereços de back-end.The following example shows how to create a load balancer rule, the frontend endpoint listening to port 80 TCP and load balancing network traffic sending to port 8080 for the backend address pool range.

azure network lb rule create -g myresourcegroup -l mylb -n mylbrule -p tcp -f 80 -b 8080 -i 10


info:    Executing command network lb rule create
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
+ Loading rule state
data:    Id:                        /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/loadBalancingRules/mylbrule
data:    Name:                      mylbrule
data:    Type:                      Microsoft.Network/loadBalancers/loadBalancingRules
data:    Provisioning state:        Succeeded
data:    Frontend IP configuration: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/frontendIPConfigurations/myfrontendip
data:    Backend address pool:      id=/subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/backendAddressPools/mybackendpool
data:    Protocol:                  Tcp
data:    Frontend port:             80
data:    Backend port:              8080
data:    Enable floating IP:        false
data:    Idle timeout in minutes:   10
data:    Probes
data:
info:    network lb rule create command OK

network lb rule set [options] <resource-group> <lb-name> <name>

Atualiza uma regra de balanceador de carga existente definida em um grupo de recursos específico.Updates an existing load balancer rule set in a specific resource group. No exemplo a seguir o nome da regra mylbrule é alterado para mynewlbrule.In the following example, we changed the rule name from mylbrule to mynewlbrule.

azure network lb rule set -g myresourcegroup -l mylb -n mylbrule -r mynewlbrule -p tcp -f 80 -b 8080 -i 10 -t myfrontendip -o mybackendpool

info:    Executing command network lb rule set
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
+ Loading rule state
data:    Id:                        /subscriptions/###############################/resourceGroups/yresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/loadBalancingRules/mynewlbrule
data:    Name:                      mynewlbrule
data:    Type:                      Microsoft.Network/loadBalancers/loadBalancingRules
data:    Provisioning state:        Succeeded
data:    Frontend IP configuration: /subscriptions/###############################/resourceGroups/yresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/frontendIPConfigurations/myfrontendip
data:    Backend address pool:      id=/subscriptions/###############################/resourceGroups/yresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/backendAddressPools/mybackendpool
data:    Protocol:                  Tcp
data:    Frontend port:             80
data:    Backend port:              8080
data:    Enable floating IP:        false
data:    Idle timeout in minutes:   10
data:    Probes
data:
info:    network lb rule set command OK

Opções de parâmetro:Parameter options:

-h, --help                                         output usage information
-v, --verbose                                      use verbose output
--json                                             use json output
-g, --resource-group <resource-group>              the name of the resource group
-l, --lb-name <lb-name>                            the name of the load balancer
-n, --name <name>                                  the name of the rule
-r, --new-rule-name <new-rule-name>                new rule name
-p, --protocol <protocol>                          the rule protocol
-f, --frontend-port <frontend-port>                the frontend port
-b, --backend-port <backend-port>                  the backend port
-e, --enable-floating-ip <enable-floating-ip>      enable floating point ip
-i, --idle-timeout <idle-timeout>                  the idle timeout in minutes
-a, --probe-name [probe-name]                      the name of the probe defined in the same load balancer
-t, --frontend-ip-name <frontend-ip-name>          the name of the frontend ip configuration in the same load balancer
-o, --backend-address-pool <backend-address-pool>  name of the backend address pool defined in the same load balancer
-s, --subscription <subscription>                  the subscription identifier


network lb rule list [options] <resource-group> <lb-name>

Lista todas as regras do balanceador de carga configuradas para um balanceador de carga em um grupo de recursos específico.Lists all load balancer rules configured for a load balancer in a specific resource group.

azure network lb rule list -g myresourcegroup -l mylb

info:    Executing command network lb rule list
+ Looking up the load balancer "mylb"
data:    Name         Provisioning state  Protocol  Frontend port  Backend port  Enable floating IP  Idle timeout in minutes  Backend address pool  Probe data

data:    mynewlbrule  Succeeded           Tcp       80             8080          false               10                       /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/backendAddressPools/mybackendpool
info:    network lb rule list command OK

Opções de parâmetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-l, --lb-name <lb-name>                the name of the load balancer
-s, --subscription <subscription>      the subscription identifier

network lb rule delete [options] <resource-group> <lb-name> <name>

Exclui uma regra de balanceador de carga.Deletes a load balancer rule.

azure network lb rule delete -g myresourcegroup -l mylb -n mynewlbrule

info:    Executing command network lb rule delete
+ Looking up the load balancer "mylb"
Delete load balancing rule mynewlbrule? [y/n] y
+ Updating load balancer "mylb"
info:    network lb rule delete command OK

Opções de parâmetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-l, --lb-name <lb-name>                the name of the load balancer
-n, --name <name>                      the name of the rule
-q, --quiet                            quiet mode, do not ask for delete confirmation
-s, --subscription <subscription>      the subscription identifier

Comandos para gerenciar as regras NAT de entrada dos balanceadores de cargaCommands to manage load balancer inbound NAT rules

network lb inbound-nat-rule create [options] <resource-group> <lb-name> <name>

Cria uma regra de NAT de entrada para o balanceador de carga.Creates an inbound NAT rule for load balancer.

No exemplo a seguir, criamos uma regra NAT de IP de front-end (que foi anteriormente definida usando o comando "azure network frontend-ip") com uma porta de escuta de entrada e a porta de saída que o balanceador de carga usa para enviar o tráfego de rede.In the following example we created a NAT rule from frontend IP (which was previously defined using the "azure network frontend-ip" command) with an inbound listening port and outbound port that the load balancer uses to send the network traffic.

azure network lb inbound-nat-rule create -g myresourcegroup -l mylb -n myinboundnat -p tcp -f 80 -b 8080 -i myfrontendip

info:    Executing command network lb inbound-nat-rule create
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
+ Looking up the load balancer "mylb"
data:    Id:                        /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/inboundNatRules/myinboundnat
data:    Name:                      myinboundnat
data:    Type:                      Microsoft.Network/loadBalancers/inboundNatRules
data:    Provisioning state:        Succeeded
data:    Frontend IP Configuration: id=/subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/frontendIPConfigurations/myfrontendip
data:    Backend IP configuration
data:    Protocol                   Tcp
data:    Frontend port              80
data:    Backend port               8080
data:    Enable floating IP         false
info:    network lb inbound-nat-rule create command OK

Opções de parâmetro:Parameter options:

-h, --help                                     output usage information
-v, --verbose                                  use verbose output
--json                                         use json output
-g, --resource-group <resource-group>          the name of the resource group
-l, --lb-name <lb-name>                        the name of the load balancer
-n, --name <name>                              the name of the inbound NAT rule
-p, --protocol <protocol>                      the rule protocol [tcp,udp]
-f, --frontend-port <frontend-port>            the frontend port [0-65535]
-b, --backend-port <backend-port>              the backend port [0-65535]
-e, --enable-floating-ip <enable-floating-ip>  enable floating point ip [true,false]
-i, --frontend-ip <frontend-ip>                the name of the frontend ip configuration
-m, --vm-id <vm-id>                            the VM id.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Compute/virtualMachines/<vm-name>
-a, --vm-name <vm-name>                        the VM name.This VM must exist in the same resource group as the lb.
Please use vm-id if that is not the case.
this parameter will be ignored if --vm-id is specified
-s, --subscription <subscription>              the subscription identifier

network lb inbound-nat-rule set [options] <resource-group> <lb-name> <name>

Atualiza uma regra de nat de entrada existente.Updates an existing inbound nat rule. No exemplo a seguir alteramos a porta de escuta de entrada de 80 para 81.In the following example, we changed the inbound listening port from 80 to 81.

azure network lb inbound-nat-rule set -g group-1 -l mylb -n myinboundnat -p tcp -f 81 -b 8080 -i myfrontendip

info:    Executing command network lb inbound-nat-rule set
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
+ Looking up the load balancer "mylb"
data:    Id:                        /subscriptions/###############################/resourceGroups/group-1/providers/Microsoft.Network/loadBalancers/mylb/inboundNatRules/myinboundnat
data:    Name:                      myinboundnat
data:    Type:                      Microsoft.Network/loadBalancers/inboundNatRules
data:    Provisioning state:        Succeeded
data:    Frontend IP Configuration: id=/subscriptions/###############################/resourceGroups/group-1/providers/Microsoft.Network/loadBalancers/mylb/frontendIPConfigurations/myfrontendip
data:    Backend IP configuration
data:    Protocol                   Tcp
data:    Frontend port              81
data:    Backend port               8080
data:    Enable floating IP         false
info:    network lb inbound-nat-rule set command OK

Opções de parâmetro:Parameter options:

-h, --help                                     output usage information
-v, --verbose                                  use verbose output
--json                                         use json output
-g, --resource-group <resource-group>          the name of the resource group
-l, --lb-name <lb-name>                        the name of the load balancer
-n, --name <name>                              the name of the inbound NAT rule
-p, --protocol <protocol>                      the rule protocol [tcp,udp]
-f, --frontend-port <frontend-port>            the frontend port [0-65535]
-b, --backend-port <backend-port>              the backend port [0-65535]
-e, --enable-floating-ip <enable-floating-ip>  enable floating point ip [true,false]
-i, --frontend-ip <frontend-ip>                the name of the frontend ip configuration
-m, --vm-id [vm-id]                            the VM id.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Compute/virtualMachines/<vm-name>
-a, --vm-name <vm-name>                        the VM name.
This virtual machine must exist in the same resource group as the lb.
Please use vm-id if that is not the case
-s, --subscription <subscription>              the subscription identifier

network lb inbound-nat-rule list [options] <resource-group> <lb-name>

Lista todas as regras de nat de entrada para o balanceador de carga.Lists all inbound nat rules for load balancer.

azure network lb inbound-nat-rule list -g myresourcegroup -l mylb

info:    Executing command network lb inbound-nat-rule list
+ Looking up the load balancer "mylb"
data:    Name          Provisioning state  Protocol  Frontend port  Backend port  Enable floating IP  Idle timeout in minutes  Backend IP configuration
data:    ------------  ------------------  --------  -------------  ------------  ------------------  -----------------------  ---
---------------------
data:    myinboundnat  Succeeded           Tcp       81             8080          false               4

info:    network lb inbound-nat-rule list command OK

Opções de parâmetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-l, --lb-name <lb-name>                the name of the load balancer
-s, --subscription <subscription>      the subscription identifier

network lb inbound-nat-rule delete [options] <resource-group> <lb-name> <name>

Exclui a regra NAT para o balanceador de carga em um grupo de recursos específico.Deletes NAT rule for the load balancer in a specific resource group.

azure network lb inbound-nat-rule delete -g myresourcegroup -l mylb -n myinboundnat

info:    Executing command network lb inbound-nat-rule delete
+ Looking up the load balancer "mylb"
Delete inbound NAT rule "myinboundnat?" [y/n] y
+ Updating load balancer "mylb"
info:    network lb inbound-nat-rule delete command OK

Opções de parâmetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-l, --lb-name <lb-name>                the name of the load balancer
-n, --name <name>                      the name of the inbound NAT rule
-q, --quiet                            quiet mode, do not ask for delete confirmation
-s, --subscription <subscription>      the subscription identifier

Comandos para gerenciar endereços ip públicosCommands to manage public ip addresses

network public-ip create [options] <resource-group> <name> <location>

Cria um recurso de ip público.Creates a public ip resource. Você criará o recurso ip público e o associará a um nome de domínio.You will create the public ip resource and associate to a domain name.

azure network public-ip create -g myresourcegroup -n mytestpublicip1 -l eastus -d azureclitest -a "Dynamic"
info:    Executing command network public-ip create
+ Looking up the public ip "mytestpublicip1"
+ Creating public ip address "mytestpublicip1"
+ Looking up the public ip "mytestpublicip1"
data:    Id:                   /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/publicIPAddresses/mytestpublicip1
data:    Name:                 mytestpublicip1
data:    Type:                 Microsoft.Network/publicIPAddresses
data:    Location:             eastus
data:    Provisioning state:   Succeeded
data:    Allocation method:    Dynamic
data:    Idle timeout:         4
data:    Domain name label:    azureclitest
data:    FQDN:                 azureclitest.eastus.cloudapp.azure.com
info:    network public-ip create command OK

Opções de parâmetro:Parameter options:

-h, --help                                   output usage information
-v, --verbose                                use verbose output
--json                                       use json output
-g, --resource-group <resource-group>        the name of the resource group
-n, --name <name>                            the name of the public ip
-l, --location <location>                    the location
-d, --domain-name-label <domain-name-label>  the domain name label.
This set DNS to <domain-name-label>.<location>.cloudapp.azure.com
-a, --allocation-method <allocation-method>  the allocation method [Static][Dynamic]
-i, --idletimeout <idletimeout>              the idle timeout in minutes
-f, --reverse-fqdn <reverse-fqdn>            the reverse fqdn
-t, --tags <tags>                            the list of tags.
Can be multiple. In the format of "name=value".
Name is required and value is optional.
For example, -t tag1=value1;tag2
-s, --subscription <subscription>            the subscription identifier

network public-ip set [options] <resource-group> <name>

Atualiza as propriedades de um recurso ip público existente.Updates the properties of an existing public ip resource. No exemplo a seguir alteramos o endereço IP público de Dinâmico para Estático.In the following example we changed the public IP address from Dynamic to Static.

azure network public-ip set -g group-1 -n mytestpublicip1 -d azureclitest -a "Static"
info:    Executing command network public-ip set
+ Looking up the public ip "mytestpublicip1"
+ Updating public ip address "mytestpublicip1"
+ Looking up the public ip "mytestpublicip1"
data:    Id:                   /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/publicIPAddresses/mytestpublicip1
data:    Name:                 mytestpublicip1
data:    Type:                 Microsoft.Network/publicIPAddresses
data:    Location:             eastus
data:    Provisioning state:   Succeeded
data:    Allocation method:    Static
data:    Idle timeout:         4
data:    IP Address:           (static IP address)
data:    Domain name label:    azureclitest
data:    FQDN:                 azureclitest.eastus.cloudapp.azure.com
info:    network public-ip set command OK

Opções de parâmetro:Parameter options:

-h, --help                                   output usage information
-v, --verbose                                use verbose output
--json                                       use json output
-g, --resource-group <resource-group>        the name of the resource group
-n, --name <name>                            the name of the public ip
-d, --domain-name-label [domain-name-label]  the domain name label.
This set DNS to <domain-name-label>.<location>.cloudapp.azure.com
-a, --allocation-method <allocation-method>  the allocation method [Static][Dynamic]
-i, --idletimeout <idletimeout>              the idle timeout in minutes
-f, --reverse-fqdn [reverse-fqdn]            the reverse fqdn
-t, --tags <tags>                            the list of tags.
Can be multiple. In the format of "name=value".
Name is required and value is optional.
For example, -t tag1=value1;tag2
--no-tags                                    remove all existing tags
-s, --subscription <subscription>            the subscription identifier

network public-ip list [options] <resource-group>

Lista todos os recursos IP público dentro de um grupo de recursos.Lists all public IP resources within a resource group.

azure network public-ip list -g myresourcegroup

info:    Executing command network public-ip list
+ Getting the public ip addresses
data:    Name             Location  Allocation  IP Address    Idle timeout  DNS Name
data:    ---------------  --------  ----------  ------------  ------------  -------------------------------------------
data:    mypubip5         westus    Dynamic                   4             "domain name".westus.cloudapp.azure.com
data:    myPublicIP       eastus    Dynamic                   4             "domain name".eastus.cloudapp.azure.com
data:    mytestpublicip   eastus    Dynamic                   4             "domain name".eastus.cloudapp.azure.com
data:    mytestpublicip1  eastus   Static (Static IP address) 4             azureclitest.eastus.cloudapp.azure.com

Opções de parâmetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-s, --subscription <subscription>      the subscription identifier

network public-ip show [options] <resource-group> <name>

Exibe as propriedades de ip público de um recurso de ip público dentro de um grupo de recursos.Displays public ip properties for a public ip resource within a resource group.

azure network public-ip show -g myresourcegroup -n mytestpublicip

info:    Executing command network public-ip show
+ Looking up the public ip "mytestpublicip1"
data:    Id:                   /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/publicIPAddresses/mytestpublicip
data:    Name:                 mytestpublicip
data:    Type:                 Microsoft.Network/publicIPAddresses
data:    Location:             eastus
data:    Provisioning state:   Succeeded
data:    Allocation method:    Static
data:    Idle timeout:         4
data:    IP Address:           (static IP address)
data:    Domain name label:    azureclitest
data:    FQDN:                 azureclitest.eastus.cloudapp.azure.com
info:    network public-ip show command OK

Opções de parâmetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-n, --name <name>                      the name of the public IP
-s, --subscription <subscription>      the subscription identifier


network public-ip delete [options] <resource-group> <name>

Exclui um recurso de ip público.Deletes public ip resource.

azure network public-ip delete -g group-1 -n mypublicipname
info:    Executing command network public-ip delete
+ Looking up the public ip "mypublicipname"
Delete public ip address "mypublicipname"? [y/n] y
+ Deleting public ip address "mypublicipname"
info:    network public-ip delete command OK

Opções de parâmetro:Parameter options:

-h, --help                             output usage information
-v, --verbose                          use verbose output
--json                                 use json output
-g, --resource-group <resource-group>  the name of the resource group
-n, --name <name>                      the name of the public IP
-q, --quiet                            quiet mode, do not ask for delete confirmation
-s, --subscription <subscription>      the subscription identifier

Comandos para gerenciar as interfaces de redeCommands to manage network interfaces

network nic create [options] <resource-group> <name> <location>

Cria um recurso chamado de interface de rede (NIC) que pode ser usado para balanceadores de carga ou associado a uma máquina virtual.Creates a resource called network interface (NIC) which can be used for load balancers or associate to a Virtual Machine.

azure network nic create -g myresourcegroup -l eastus -n testnic1 --subnet-name subnet-1 --subnet-vnet-name myvnet

info:    Executing command network nic create
+ Looking up the network interface "testnic1"
+ Looking up the subnet "subnet-1"
+ Creating network interface "testnic1"
+ Looking up the network interface "testnic1"
data:    Id:                     /subscriptions/c4a17ddf-aa84-491c-b6f9-b90d882299f7/resourceGroups/group-1/providers/Microsoft.Network/networkInterfaces/testnic1
data:    Name:                   testnic1
data:    Type:                   Microsoft.Network/networkInterfaces
data:    Location:               eastus
data:    Provisioning state:     Succeeded
data:    IP configurations:
data:       Name:                         NIC-config
data:       Provisioning state:           Succeeded
data:       Private IP address:           10.0.0.5
data:       Private IP Allocation Method: Dynamic
data:       Subnet:                       /subscriptions/c4a17ddf-aa84-491c-b6f9-b90d882299f7/resourceGroups/group-1/providers/Microsoft.Network/virtualNetworks/myVNET/subnets/Subnet-1

Opções de parâmetro:Parameter options:

-h, --help                                                       output usage information
-v, --verbose                                                    use verbose output
--json                                                           use json output
-g, --resource-group <resource-group>                            the name of the resource group
-n, --name <name>                                                the name of the network interface
-l, --location <location>                                        the location
-w, --network-security-group-id <network-security-group-id>      the network security group identifier.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/networkSecurityGroups/<nsg-name>
-o, --network-security-group-name <network-security-group-name>  the network security group name.
This network security group must exist in the same resource group as the nic.
Please use network-security-group-id if that is not the case.
-i, --public-ip-id <public-ip-id>                                the public IP identifier.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/publicIPAddresses/<public-ip-name>
-p, --public-ip-name <public-ip-name>                            the public IP name.
This public ip must exist in the same resource group as the nic.
Please use public-ip-id if that is not the case.
-a, --private-ip-address <private-ip-address>                    the private IP address
-u, --subnet-id <subnet-id>                                      the subnet identifier.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/virtualNetworks/<vnet-name>/subnets/<subnet-name>
--subnet-name <subnet-name>                                  the subnet name
-m, --subnet-vnet-name <subnet-vnet-name>                        the vnet name under which subnet-name exists
-t, --tags <tags>                                                the comma separated list of tags.
Can be multiple. In the format of "name=value".
Name is required and value is optional.
For example, -t tag1=value1;tag2
-s, --subscription <subscription>                                the subscription identifier
data:
info:    network nic create command OK

network nic set [options] <resource-group> <name>

network nic list [options] <resource-group>
network nic show [options] <resource-group> <name>
network nic delete [options] <resource-group> <name>

Comandos para gerenciar grupos de segurança de redeCommands to manage network security groups

network nsg create [options] <resource-group> <name> <location>
network nsg set [options] <resource-group> <name>
network nsg list [options] <resource-group>
network nsg show [options] <resource-group> <name>
network nsg delete [options] <resource-group> <name>

Comandos para gerenciar regras de segurança de redeCommands to manage network security group rules

network nsg rule create [options] <resource-group> <nsg-name> <name>
network nsg rule set [options] <resource-group> <nsg-name> <name>
network nsg rule list [options] <resource-group> <nsg-name>
network nsg rule show [options] <resource-group> <nsg-name> <name>
network nsg rule delete [options] <resource-group> <nsg-name> <name>

Comandos para gerenciar o perfil do gerenciador de tráfegoCommands to manage traffic manager profile

network traffic-manager profile create [options] <resource-group> <name>
network traffic-manager profile set [options] <resource-group> <name>
network traffic-manager profile list [options] <resource-group>
network traffic-manager profile show [options] <resource-group> <name>
network traffic-manager profile delete [options] <resource-group> <name>
network traffic-manager profile is-dns-available [options] <resource-group> <relative-dns-name>

Comandos para gerenciar os pontos de extremidade do gerenciador de tráfegoCommands to manage traffic manager endpoints

network traffic-manager profile endpoint create [options] <resource-group> <profile-name> <name> <endpoint-location>
network traffic-manager profile endpoint set [options] <resource-group> <profile-name> <name>
network traffic-manager profile endpoint delete [options] <resource-group> <profile-name> <name>

Comandos para gerenciar gateways de redes virtuaisCommands to manage virtual network gateways

network gateway list [options] <resource-group>

provedor do Azure: Comandos para gerenciar registros de provedor de recursosazure provider: Commands to manage resource provider registrations

Liste os provedores registrados atualmente no Resource ManagerList currently registered providers in Resource Manager

provider list [options]

Mostra os detalhes sobre o namespace do provedor solicitadoShow details about the requested provider namespace

provider show [options] <namespace>

Registra o provedor com a assinaturaRegister provider with the subscription

provider register [options] <namespace>

Cancela o registro do provedor com a assinaturaUnregister provider with the subscription

provider unregister [options] <namespace>

recursos do Azure: Comandos para gerenciar seus recursosazure resource: Commands to manage your resources

Cria um recurso em um grupo de recursosCreates a resource in a resource group

resource create [options] <resource-group> <name> <resource-type> <location> <api-version>

Atualiza um recurso em um grupo de recursos sem parâmetros ou modelosUpdates a resource in a resource group without any templates or parameters

resource set [options] <resource-group> <name> <resource-type> <properties> <api-version>

Lista os recursosLists the resources

resource list [options] [resource-group]

Obtém um recurso dentro de um grupo de recursos ou assinaturaGets one resource within a resource group or subscription

resource show [options] <resource-group> <name> <resource-type> <api-version>

Exclui um recurso em um grupo de recursosDeletes a resource in a resource group

resource delete [options] <resource-group> <name> <resource-type> <api-version>

Função do Azure: Comandos para gerenciar as funções do Azureazure role: Commands to manage your Azure roles

Obtenha todas as definições de função disponíveisGet all available role definitions

role list [options]

Obtenha uma definição de função disponívelGet an available role definition

role show [options] [name]

Comandos para gerenciar sua atribuição de funçãoCommands to manage your role assignment

role assignment create [options] [objectId] [upn] [mail] [spn] [role] [scope] [resource-group] [resource-type] [resource-name]
role assignment list [options] [objectId] [upn] [mail] [spn] [role] [scope] [resource-group] [resource-type] [resource-name]
role assignment delete [options] [objectId] [upn] [mail] [spn] [role] [scope] [resource-group] [resource-type] [resource-name]

armazenamento do Azure: Comandos para gerenciar seus objetos de armazenamentoazure storage: Commands to manage your Storage objects

Comandos para gerenciar suas contas de ArmazenamentoCommands to manage your Storage accounts

storage account list [options]
storage account show [options] <name>
storage account create [options] <name>
storage account set [options] <name>
storage account delete [options] <name>

Comandos para gerenciar suas chaves de contas de ArmazenamentoCommands to manage your Storage account keys

storage account keys list [options] <name>
storage account keys renew [options] <name>

Comandos para mostrar a cadeia de conexão de ArmazenamentoCommands to show your Storage connection string

storage account connectionstring show [options] <name>

Comandos para gerenciar seu contêiner de ArmazenamentoCommands to manage your Storage containers

storage container list [options] [prefix]
storage container show [options] [container]
storage container create [options] [container]
storage container delete [options] [container]
storage container set [options] [container]

Comandos para gerenciar assinaturas de acesso compartilhado do seu contêiner de ArmazenamentoCommands to manage shared access signatures of your Storage container

storage container sas create [options] [container] [permissions] [expiry]

Comandos para gerenciar políticas de acesso compartilhado do seu contêiner de ArmazenamentoCommands to manage stored access policies of your Storage container

storage container policy create [options] [container] [name]
storage container policy show [options] [container] [name]
storage container policy list [options] [container]
storage container policy set [options] [container] [name]
storage container policy delete [options] [container] [name]

Comandos para gerenciar seus blobs de ArmazenamentoCommands to manage your Storage blobs

storage blob list [options] [container] [prefix]
storage blob show [options] [container] [blob]
storage blob delete [options] [container] [blob]
storage blob upload [options] [file] [container] [blob]
storage blob download [options] [container] [blob] [destination]

Comandos para gerenciar suas operações de cópia de blobCommands to manage your blob copy operations

storage blob copy start [options] [sourceUri] [destContainer]
storage blob copy show [options] [container] [blob]
storage blob copy stop [options] [container] [blob] [copyid]

Comandos para gerenciar a assinatura de acesso compartilhado do blob de ArmazenamentoCommands to manage shared access signature of your Storage blob

storage blob sas create [options] [container] [blob] [permissions] [expiry]

Comandos para gerenciar seus compartilhamentos de arquivos de ArmazenamentoCommands to manage your Storage file shares

storage share create [options] [share]
storage share show [options] [share]
storage share delete [options] [share]
storage share list [options] [prefix]

Comandos para gerenciar seus arquivos de ArmazenamentoCommands to manage your Storage files

storage file list [options] [share] [path]
storage file delete [options] [share] [path]
storage file upload [options] [source] [share] [path]
storage file download [options] [share] [path] [destination]

Comandos para gerenciar seu diretório de arquivos de ArmazenamentoCommands to manage your Storage file directory

storage directory create [options] [share] [path]
storage directory delete [options] [share] [path]

Comandos para gerenciar suas filas de ArmazenamentoCommands to manage your Storage queues

storage queue create [options] [queue]
storage queue list [options] [prefix]
storage queue show [options] [queue]
storage queue delete [options] [queue]

Comandos para gerenciar assinaturas de acesso compartilhado da sua fila de ArmazenamentoCommands to manage shared access signatures of your Storage queue

storage queue sas create [options] [queue] [permissions] [expiry]

Comandos para gerenciar políticas de acesso armazenado da sua fila de ArmazenamentoCommands to manage stored access policies of your Storage queue

storage queue policy create [options] [queue] [name]
storage queue policy show [options] [queue] [name]
storage queue policy list [options] [queue]
storage queue policy set [options] [queue] [name]
storage queue policy delete [options] [queue] [name]

Comandos para gerenciar as propriedades de log do ArmazenamentoCommands to manage your Storage logging properties

storage logging show [options]
storage logging set [options]

Comandos para gerenciar as propriedades métricas do ArmazenamentoCommands to manage your Storage metrics properties

storage metrics show [options]
storage metrics set [options]

Comandos para gerenciar suas tabelas de armazenamentoCommands to manage your Storage tables

storage table create [options] [table]
storage table list [options] [prefix]
storage table show [options] [table]
storage table delete [options] [table]

Comandos para gerenciar assinaturas de acesso compartilhado da sua tabela de ArmazenamentoCommands to manage shared access signatures of your Storage table

storage table sas create [options] [table] [permissions] [expiry]

Comandos para gerenciar políticas de acesso armazenado da sua tabela de ArmazenamentoCommands to manage stored access policies of your Storage table

storage table policy create [options] [table] [name]
storage table policy show [options] [table] [name]
storage table policy list [options] [table]
storage table policy set [options] [table] [name]
storage table policy delete [options] [table] [name]

azure tag: Comandos para gerenciar sua marca do Gerenciador de recursosazure tag: Commands to manage your resource manager tag

Adicione uma marcaAdd a tag

tag create [options] <name> <value>

Remova uma marca inteira ou um valor de marcaRemove an entire tag or a tag value

tag delete [options] <name> <value>

Lista as informações da marcaLists the tag information

tag list [options]

Obtém uma marcaGet a tag

tag show [options] [name]

azure vm: Comandos para gerenciar as máquinas virtuais do Azureazure vm: Commands to manage your Azure Virtual Machines

Cria uma máquina virtualCreate a VM

vm create [options] <resource-group> <name> <location> <os-type>

Cria uma máquina virtual com recursos padrõesCreate a VM with default resources

vm quick-create [options] <resource-group> <name> <location> <os-type> <image-urn> <admin-username> <admin-password

Dica

Começando na versão 0.10 da CLI, você pode fornecer um alias curto, como "UbuntuLTS" ou "Win2012R2Datacenter", como o image-urn para algumas imagens populares do Marketplace.Starting with CLI version 0.10, you can provide a short alias such as "UbuntuLTS" or "Win2012R2Datacenter" as the image-urn for some popular Marketplace images. Execute azure help vm quick-create para opções.Run azure help vm quick-create for options. Além disso, a partir da versão 0.10, azure vm quick-create usará o armazenamento premium por padrão, se ele estiver disponível na região selecionada.Additionally, starting with version 0.10, azure vm quick-create uses premium storage by default if it's available in the selected region.

Listar as máquinas virtuais dentro de uma contaList the virtual machines within an account

vm list [options]

Obtém uma máquina virtual dentro de um grupo de recursosGet one virtual machine within a resource group

vm show [options] <resource-group> <name>

Exclui uma máquina virtual dentro de um grupo de recursosDelete one virtual machine within a resource group

vm delete [options] <resource-group> <name>

Desliga uma máquina virtual dentro de um grupo de recursosShutdown one virtual machine within a resource group

vm stop [options] <resource-group> <name>

Reinicia uma máquina virtual dentro de um grupo de recursosRestart one virtual machine within a resource group

vm restart [options] <resource-group> <name>

Inicia uma máquina virtual dentro de um grupo de recursosStart one virtual machine within a resource group

vm start [options] <resource-group> <name>

Desliga uma máquina virtual dentro de um grupo de recursos e libera os recursos de computaçãoShutdown one virtual machine within a resource group and releases the compute resources

vm deallocate [options] <resource-group> <name>

Lista os tamanhos de máquina virtual disponíveisList available virtual machine sizes

vm sizes [options]

Captura a VM como uma imagem do sistema operacional ou imagem da VMCapture the VM as OS Image or VM Image

vm capture [options] <resource-group> <name> <vhd-name-prefix>

Define o estado da VM como GeneralizedSet the state of the VM to Generalized

vm generalize [options] <resource-group> <name>

Obtém a exibição da instância da VMGet instance view of the VM

vm get-instance-view [options] <resource-group> <name>

Permite redefinir as configurações de acesso de área de trabalho remota ou SSH em uma máquina virtual e redefinir a senha para a conta que tem autoridade sudo ou de administradorEnable you to reset Remote Desktop Access or SSH settings on a Virtual Machine and to reset the password for the account that has administrator or sudo authority

vm reset-access [options] <resource-group> <name>

Atualiza a VM com novos dadosUpdate VM with new data

vm set [options] <resource-group> <name>

Comandos para gerenciar seus discos de dados de máquinas virtuaisCommands to manage your Virtual Machine data disks

vm disk attach-new [options] <resource-group> <vm-name> <size-in-gb> [vhd-name]
vm disk detach [options] <resource-group> <vm-name> <lun>
vm disk attach [options] <resource-group> <vm-name> [vhd-url]

Comandos para gerenciar as extensões de recurso da VMCommands to manage VM resource extensions

vm extension set [options] <resource-group> <vm-name> <name> <publisher-name> <version>
vm extension get [options] <resource-group> <vm-name>

Comandos para gerenciar sua máquina virtual DockerCommands to manage your Docker Virtual Machine

vm docker create [options] <resource-group> <name> <location> <os-type>

Comandos para gerenciar as imagens de VMCommands to manage VM images

vm image list-publishers [options] <location>
vm image list-offers [options] <location> <publisher>
vm image list-skus [options] <location> <publisher> <offer>
vm image list [options] <location> <publisher> [offer] [sku]