StylusPoint.PressureFactor Propriedade

Definição

Obtém ou define um valor entre 0 e 1 que reflete a quantidade de pressão que a caneta aplica à superfície do digitalizador quando o StylusPoint é criado.Gets or sets a value between 0 and 1 that reflects the amount of pressure the stylus applies to the digitizer's surface when the StylusPoint is created.

public:
 property float PressureFactor { float get(); void set(float value); };
public float PressureFactor { get; set; }
member this.PressureFactor : single with get, set
Public Property PressureFactor As Single

Valor da propriedade

O valor entre 0 e 1 indica a quantidade de pressão que a caneta aplica à superfície do digitalizador conforme o StylusPoint é criado.Value between 0 and 1 indicating the amount of pressure the stylus applies to the digitizer's surface as the StylusPoint is created.

Exceções

A propriedade PressureFactor é definida como um valor menor que 0 ou maior que 1.The PressureFactor property is set to a value less than 0 or greater than 1.

Exemplos

O exemplo a seguir usa a propriedade PressureFactor para recuperar e exibir o valor de pressão para cada StylusPoint em um StylusPointCollection chamado points.The following example uses the PressureFactor property to retrieve and display the pressure value for each StylusPoint in a StylusPointCollection called points. Este exemplo pressupõe que há um TextBlock chamado packetOutput.This example assumes that there is a TextBlock called packetOutput.

private void WriteStylusPointValues(StylusPointCollection points)
{
    StylusPointDescription pointsDescription = points.Description;

    ReadOnlyCollection<StylusPointPropertyInfo> properties = 
        pointsDescription.GetStylusPointProperties();
    
    // Write the name and value of each property in
    // every stylus point.
    StringWriter packetWriter = new StringWriter();
    packetWriter.WriteLine("{0} stylus points", points.Count.ToString());
    foreach (StylusPoint stylusPoint in points)
    {
        packetWriter.WriteLine("Stylus Point info");
        packetWriter.WriteLine("X: {0}", stylusPoint.X.ToString());
        packetWriter.WriteLine("Y: {0}", stylusPoint.Y.ToString());
        packetWriter.WriteLine("Pressure: {0}", stylusPoint.PressureFactor.ToString());

        // Get the property name and value for each StylusPoint.
        // Note that this loop reports the X, Y, and pressure values differantly than 
        // getting their values above.
        for (int i = 0; i < pointsDescription.PropertyCount; ++i)
        {
            StylusPointProperty currentProperty = properties[i];

            // GetStylusPointPropertyName is defined below and returns the
            // name of the property.
            packetWriter.Write("{0}: ", GetStylusPointPropertyName(currentProperty));
            packetWriter.WriteLine(stylusPoint.GetPropertyValue(currentProperty).ToString());
        }
        packetWriter.WriteLine();

    }

    packetOutput.Text = packetWriter.ToString();
}
Private Sub WriteStylusPointValues(ByVal points As StylusPointCollection) 
    Dim pointsDescription As StylusPointDescription = points.Description
    
    Dim properties As ReadOnlyCollection(Of StylusPointPropertyInfo) = _
                            pointsDescription.GetStylusPointProperties()
    
    ' Write the name and value of each property in
    ' every stylus point.
    Dim packetWriter As New StringWriter()

    packetWriter.WriteLine("{0} stylus points", points.Count.ToString())

    For Each stylusPoint As StylusPoint In points

        packetWriter.WriteLine("Stylus Point info")
        packetWriter.WriteLine("X: {0}", stylusPoint.X.ToString())
        packetWriter.WriteLine("Y: {0}", stylusPoint.Y.ToString())
        packetWriter.WriteLine("Pressure: {0}", stylusPoint.PressureFactor.ToString())

        ' Get the property name and value for each StylusPoint.
        ' Note that this loop reports the X, Y, and pressure values differantly than 
        ' getting their values above.
        For i As Integer = 0 To pointsDescription.PropertyCount - 1

            Dim currentProperty As StylusPointProperty = properties(i)

            ' GetStylusPointPropertyName is defined below and returns the
            ' name of the property.
            packetWriter.Write("{0}: ", GetStylusPointPropertyName(currentProperty))
            packetWriter.WriteLine(stylusPoint.GetPropertyValue(currentProperty).ToString())
        Next i

        packetWriter.WriteLine()

    Next stylusPoint

    packetOutput.Text = packetWriter.ToString()

End Sub

// Use reflection to get the name of currentProperty.
private string GetStylusPointPropertyName(StylusPointProperty currentProperty)
{
    Guid guid = currentProperty.Id;

    // Iterate through the StylusPointProperties to find the StylusPointProperty
    // that matches currentProperty, then return the name.
    foreach (FieldInfo theFieldInfo
        in typeof(StylusPointProperties).GetFields())
    {
        StylusPointProperty property = (StylusPointProperty) theFieldInfo.GetValue(currentProperty);
        if (property.Id == guid)
        {
            return theFieldInfo.Name;
        }
    }
    return "Not found";
}
' Use reflection to get the name of currentProperty.
Private Function GetStylusPointPropertyName(ByVal currentProperty As StylusPointProperty) As String 
    Dim guid As Guid = currentProperty.Id
    
    ' Iterate through the StylusPointProperties to find the StylusPointProperty
    ' that matches currentProperty, then return the name.
    Dim theFieldInfo As FieldInfo

    For Each theFieldInfo In GetType(StylusPointProperties).GetFields()

        Dim pointProperty As StylusPointProperty = _
            CType(theFieldInfo.GetValue(currentProperty), StylusPointProperty)

        If pointProperty.Id = guid Then
            Return theFieldInfo.Name
        End If

    Next theFieldInfo

    Return "Not found"

End Function 'GetStylusPointPropertyName

Comentários

O valor da propriedade PressureFactor é expresso como um valor entre 0 e 1.The value of the PressureFactor property is expressed as a value between 0 and 1. Um valor de 0 indica que nenhuma pressão é aplicada, enquanto um valor de 1 indica que a quantidade máxima de pressão é aplicada.A value of 0 indicates that no pressure is applied, while a value of 1 indicates that the maximum amount of pressure is applied. Um valor de 0,5 indica que 50% da pressão máxima é aplicada e assim por diante.A value of 0.5 indicates that 50% of the maximum pressure is applied, and so on.

Aplica-se a