Array.GetValue Метод

Определение

Возвращает значение указанного элемента в текущем массиве Array.Gets the value of the specified element in the current Array.

Перегрузки

GetValue(Int64, Int64, Int64)

Получает значение, хранящееся в указанной позиции трехмерного массива Array.Gets the value at the specified position in the three-dimensional Array. Индексы задаются в виде 64-разрядных целых чисел.The indexes are specified as 64-bit integers.

GetValue(Int32, Int32, Int32)

Получает значение, хранящееся в указанной позиции трехмерного массива Array.Gets the value at the specified position in the three-dimensional Array. Индексы задаются в виде 32-битовых целых чисел.The indexes are specified as 32-bit integers.

GetValue(Int64, Int64)

Получает значение в заданной позиции двумерного массива Array.Gets the value at the specified position in the two-dimensional Array. Индексы задаются в виде 64-разрядных целых чисел.The indexes are specified as 64-bit integers.

GetValue(Int32, Int32)

Получает значение в заданной позиции двухмерного массива Array.Gets the value at the specified position in the two-dimensional Array. Индексы задаются в виде 32-разрядных целых чисел.The indexes are specified as 32-bit integers.

GetValue(Int32)

Возвращает значение, хранящееся в указанной позиции одномерного массива Array.Gets the value at the specified position in the one-dimensional Array. Индекс задается как 32-разрядное целое число.The index is specified as a 32-bit integer.

GetValue(Int64)

Получает значение, хранящееся в указанной позиции одномерного массива Array.Gets the value at the specified position in the one-dimensional Array. Индекс задается как 64-битовое целое число.The index is specified as a 64-bit integer.

GetValue(Int32[])

Получает значение, находящееся в указанной позиции многомерного массива Array.Gets the value at the specified position in the multidimensional Array. Индексы задаются как массив 32-битовых целых чисел.The indexes are specified as an array of 32-bit integers.

GetValue(Int64[])

Получает значение, хранящееся в указанной позиции многомерного массива Array.Gets the value at the specified position in the multidimensional Array. Индексы задаются как массив 64-разрядных целых чисел.The indexes are specified as an array of 64-bit integers.

GetValue(Int64, Int64, Int64)

Получает значение, хранящееся в указанной позиции трехмерного массива Array.Gets the value at the specified position in the three-dimensional Array. Индексы задаются в виде 64-разрядных целых чисел.The indexes are specified as 64-bit integers.

public:
 System::Object ^ GetValue(long index1, long index2, long index3);
[System.Runtime.InteropServices.ComVisible(false)]
public object GetValue (long index1, long index2, long index3);
member this.GetValue : int64 * int64 * int64 -> obj
Public Function GetValue (index1 As Long, index2 As Long, index3 As Long) As Object

Параметры

index1
Int64

64-разрядное целое число, представляющее индекс возвращаемого элемента в первом измерении массива Array.A 64-bit integer that represents the first-dimension index of the Array element to get.

index2
Int64

64-разрядное целое число, представляющее индекс возвращаемого элемента во втором измерении массива Array.A 64-bit integer that represents the second-dimension index of the Array element to get.

index3
Int64

64-разрядное целое число, представляющее индекс возвращаемого элемента в третьем измерении массива Array.A 64-bit integer that represents the third-dimension index of the Array element to get.

Возвраты

Значение, хранящееся в указанной позиции трехмерного массива Array.The value at the specified position in the three-dimensional Array.

Атрибуты

Исключения

Текущий массив Array не имеет ровно трех измерений.The current Array does not have exactly three dimensions.

index1, index2 или index3 находится вне диапазона допустимых индексов для соответствующего измерения текущего массива Array.index1 or index2 or index3 is outside the range of valid indexes for the corresponding dimension of the current Array.

Примеры

В следующем примере кода показано, как задать и получить конкретное значение в одномерном или многомерном массиве.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {
 
      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );


      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );


      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );


      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );

   }
 
}


/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub

End Class


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

Комментарии

Методы GetLowerBound и GetUpperBound могут определять, находятся ли индексы вне допустимого диапазона.The GetLowerBound and GetUpperBound methods can determine whether any of the indexes is out of bounds.

Этот метод является операцией O (1).This method is an O(1) operation.

Дополнительно

GetValue(Int32, Int32, Int32)

Получает значение, хранящееся в указанной позиции трехмерного массива Array.Gets the value at the specified position in the three-dimensional Array. Индексы задаются в виде 32-битовых целых чисел.The indexes are specified as 32-bit integers.

public:
 System::Object ^ GetValue(int index1, int index2, int index3);
public object GetValue (int index1, int index2, int index3);
member this.GetValue : int * int * int -> obj
Public Function GetValue (index1 As Integer, index2 As Integer, index3 As Integer) As Object

Параметры

index1
Int32

32-разрядное целое число, представляющее индекс получаемого элемента в первом измерении массива Array.A 32-bit integer that represents the first-dimension index of the Array element to get.

index2
Int32

32-разрядное целое число, представляющее индекс получаемого элемента во втором измерении массива Array.A 32-bit integer that represents the second-dimension index of the Array element to get.

index3
Int32

32-разрядное целое число, представляющее индекс получаемого элемента в третьем измерении массива Array.A 32-bit integer that represents the third-dimension index of the Array element to get.

Возвраты

Значение, хранящееся в указанной позиции трехмерного массива Array.The value at the specified position in the three-dimensional Array.

Исключения

Текущий массив Array не имеет ровно трех измерений.The current Array does not have exactly three dimensions.

index1, index2 или index3 находится вне диапазона допустимых индексов для соответствующего измерения текущего массива Array.index1 or index2 or index3 is outside the range of valid indexes for the corresponding dimension of the current Array.

Примеры

В следующем примере кода показано, как задать и получить конкретное значение в одномерном или многомерном массиве.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {
 
      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );


      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );


      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );


      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );

   }
 
}


/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub

End Class


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

Комментарии

Методы GetLowerBound и GetUpperBound могут определять, находятся ли индексы вне допустимого диапазона.The GetLowerBound and GetUpperBound methods can determine whether any of the indexes is out of bounds.

Этот метод является операцией O (1).This method is an O(1) operation.

Дополнительно

GetValue(Int64, Int64)

Получает значение в заданной позиции двумерного массива Array.Gets the value at the specified position in the two-dimensional Array. Индексы задаются в виде 64-разрядных целых чисел.The indexes are specified as 64-bit integers.

public:
 System::Object ^ GetValue(long index1, long index2);
[System.Runtime.InteropServices.ComVisible(false)]
public object GetValue (long index1, long index2);
member this.GetValue : int64 * int64 -> obj
Public Function GetValue (index1 As Long, index2 As Long) As Object

Параметры

index1
Int64

64-разрядное целое число, представляющее индекс возвращаемого элемента в первом измерении массива Array.A 64-bit integer that represents the first-dimension index of the Array element to get.

index2
Int64

64-разрядное целое число, представляющее индекс возвращаемого элемента во втором измерении массива Array.A 64-bit integer that represents the second-dimension index of the Array element to get.

Возвраты

Значение, находящееся в указанной позиции двумерного массива Array.The value at the specified position in the two-dimensional Array.

Атрибуты

Исключения

Текущий массив Array не имеет ровно два измерения.The current Array does not have exactly two dimensions.

Значение параметра index1 или index2 находится вне диапазона допустимых индексов для соответствующего измерения текущего массива Array.Either index1 or index2 is outside the range of valid indexes for the corresponding dimension of the current Array.

Примеры

В следующем примере кода показано, как задать и получить конкретное значение в одномерном или многомерном массиве.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {
 
      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );


      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );


      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );


      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );

   }
 
}


/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub

End Class


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

Комментарии

Методы GetLowerBound и GetUpperBound могут определять, находятся ли индексы вне допустимого диапазона.The GetLowerBound and GetUpperBound methods can determine whether any of the indexes is out of bounds.

Этот метод является операцией O (1).This method is an O(1) operation.

Дополнительно

GetValue(Int32, Int32)

Получает значение в заданной позиции двухмерного массива Array.Gets the value at the specified position in the two-dimensional Array. Индексы задаются в виде 32-разрядных целых чисел.The indexes are specified as 32-bit integers.

public:
 System::Object ^ GetValue(int index1, int index2);
public object GetValue (int index1, int index2);
member this.GetValue : int * int -> obj
Public Function GetValue (index1 As Integer, index2 As Integer) As Object

Параметры

index1
Int32

32-разрядное целое число, представляющее индекс получаемого элемента в первом измерении массива Array.A 32-bit integer that represents the first-dimension index of the Array element to get.

index2
Int32

32-разрядное целое число, представляющее индекс получаемого элемента во втором измерении массива Array.A 32-bit integer that represents the second-dimension index of the Array element to get.

Возвраты

Значение, находящееся в указанной позиции двумерного массива Array.The value at the specified position in the two-dimensional Array.

Исключения

Текущий массив Array не имеет ровно два измерения.The current Array does not have exactly two dimensions.

index1 или index2 находится вне диапазона допустимых индексов для соответствующего измерения текущего массива Array.Either index1 or index2 is outside the range of valid indexes for the corresponding dimension of the current Array.

Примеры

В следующем примере кода показано, как задать и получить конкретное значение в одномерном или многомерном массиве.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {
 
      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );


      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );


      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );


      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );

   }
 
}


/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub

End Class


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

Комментарии

Методы GetLowerBound и GetUpperBound могут определять, находятся ли индексы вне допустимого диапазона.The GetLowerBound and GetUpperBound methods can determine whether any of the indexes is out of bounds.

Этот метод является операцией O (1).This method is an O(1) operation.

Дополнительно

GetValue(Int32)

Возвращает значение, хранящееся в указанной позиции одномерного массива Array.Gets the value at the specified position in the one-dimensional Array. Индекс задается как 32-разрядное целое число.The index is specified as a 32-bit integer.

public:
 System::Object ^ GetValue(int index);
public object GetValue (int index);
member this.GetValue : int -> obj
Public Function GetValue (index As Integer) As Object

Параметры

index
Int32

32-разрядное целое, представляющее позицию получаемого элемента в массиве Array.A 32-bit integer that represents the position of the Array element to get.

Возвраты

Значение, хранящееся в указанной позиции одномерного массива Array.The value at the specified position in the one-dimensional Array.

Исключения

Текущий массив Array не имеет ровно одного измерения.The current Array does not have exactly one dimension.

index находится вне диапазона допустимых индексов для текущего массива Array.index is outside the range of valid indexes for the current Array.

Примеры

В следующем примере кода показано, как задать и получить конкретное значение в одномерном или многомерном массиве.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {
 
      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );


      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );


      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );


      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );

   }
 
}


/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub

End Class


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

Комментарии

Методы GetLowerBound и GetUpperBound могут определить, находится ли значение index вне допустимого диапазона.The GetLowerBound and GetUpperBound methods can determine whether the value of index is out of bounds.

Этот метод является операцией O (1).This method is an O(1) operation.

Дополнительно

GetValue(Int64)

Получает значение, хранящееся в указанной позиции одномерного массива Array.Gets the value at the specified position in the one-dimensional Array. Индекс задается как 64-битовое целое число.The index is specified as a 64-bit integer.

public:
 System::Object ^ GetValue(long index);
[System.Runtime.InteropServices.ComVisible(false)]
public object GetValue (long index);
member this.GetValue : int64 -> obj
Public Function GetValue (index As Long) As Object

Параметры

index
Int64

64-разрядное целое число, представляющее позицию возвращаемого элемента Array.A 64-bit integer that represents the position of the Array element to get.

Возвраты

Значение, хранящееся в указанной позиции одномерного массива Array.The value at the specified position in the one-dimensional Array.

Атрибуты

Исключения

Текущий массив Array не имеет ровно одного измерения.The current Array does not have exactly one dimension.

index находится вне диапазона допустимых индексов для текущего массива Array.index is outside the range of valid indexes for the current Array.

Примеры

В следующем примере кода показано, как задать и получить конкретное значение в одномерном или многомерном массиве.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {
 
      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );


      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );


      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );


      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );

   }
 
}


/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub

End Class


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

Комментарии

Методы GetLowerBound и GetUpperBound могут определить, находится ли значение index вне допустимого диапазона.The GetLowerBound and GetUpperBound methods can determine whether the value of index is out of bounds.

Этот метод является операцией O (1).This method is an O(1) operation.

Дополнительно

GetValue(Int32[])

Получает значение, находящееся в указанной позиции многомерного массива Array.Gets the value at the specified position in the multidimensional Array. Индексы задаются как массив 32-битовых целых чисел.The indexes are specified as an array of 32-bit integers.

public:
 System::Object ^ GetValue(... cli::array <int> ^ indices);
public object GetValue (params int[] indices);
member this.GetValue : int[] -> obj
Public Function GetValue (ParamArray indices As Integer()) As Object

Параметры

indices
Int32[]

Одномерный массив 32-битовых целых чисел, представляющий индексы, которые задают позицию получаемого элемента Array.A one-dimensional array of 32-bit integers that represent the indexes specifying the position of the Array element to get.

Возвраты

Значение, находящееся в указанной позиции многомерного массива Array.The value at the specified position in the multidimensional Array.

Исключения

Свойство indices имеет значение null.indices is null.

Число измерений в текущем массиве Array не равно числу элементов в indices.The number of dimensions in the current Array is not equal to the number of elements in indices.

Любой элемент в indices находится вне диапазона допустимых индексов для соответствующего измерения текущего массива Array.Any element in indices is outside the range of valid indexes for the corresponding dimension of the current Array.

Примеры

В следующем примере кода показано, как задать и получить конкретное значение в одномерном или многомерном массиве.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {
 
      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );


      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );


      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );


      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );

   }
 
}


/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub

End Class


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

Комментарии

Число элементов в indices должно равняться числу измерений в Array.The number of elements in indices must equal the number of dimensions in the Array. Все элементы массива indices должны совместно указывать расположение требуемого элемента в многомерном Array.All elements in the indices array must collectively specify the position of the desired element in the multidimensional Array.

Методы GetLowerBound и GetUpperBound могут определять, находятся ли индексы вне допустимого диапазона.The GetLowerBound and GetUpperBound methods can determine whether any of the indexes is out of bounds.

Этот метод является операцией O (1).This method is an O(1) operation.

Дополнительно

GetValue(Int64[])

Получает значение, хранящееся в указанной позиции многомерного массива Array.Gets the value at the specified position in the multidimensional Array. Индексы задаются как массив 64-разрядных целых чисел.The indexes are specified as an array of 64-bit integers.

public:
 System::Object ^ GetValue(... cli::array <long> ^ indices);
[System.Runtime.InteropServices.ComVisible(false)]
public object GetValue (params long[] indices);
member this.GetValue : int64[] -> obj
Public Function GetValue (ParamArray indices As Long()) As Object

Параметры

indices
Int64[]

Одномерный массив 64-разрядных целых чисел, представляющих индексы, которые определяют позицию возвращаемого элемента Array.A one-dimensional array of 64-bit integers that represent the indexes specifying the position of the Array element to get.

Возвраты

Значение, находящееся в указанной позиции многомерного массива Array.The value at the specified position in the multidimensional Array.

Атрибуты

Исключения

Свойство indices имеет значение null.indices is null.

Число измерений в текущем массиве Array не равно числу элементов в indices.The number of dimensions in the current Array is not equal to the number of elements in indices.

Любой элемент в indices находится вне диапазона допустимых индексов для соответствующего измерения текущего массива Array.Any element in indices is outside the range of valid indexes for the corresponding dimension of the current Array.

Примеры

В следующем примере кода показано, как задать и получить конкретное значение в одномерном или многомерном массиве.The following code example demonstrates how to set and get a specific value in a one-dimensional or multidimensional array.

using namespace System;
int main()
{
   
   // Creates and initializes a one-dimensional array.
   array<String^>^myArr1 = gcnew array<String^>(5);
   
   // Sets the element at index 3.
   myArr1->SetValue( "three", 3 );
   Console::WriteLine( "[3]:   {0}", myArr1->GetValue( 3 ) );
   
   // Creates and initializes a two-dimensional array.
   array<String^, 2>^myArr2 = gcnew array<String^,2>(5,5);
   
   // Sets the element at index 1,3.
   myArr2->SetValue( "one-three", 1, 3 );
   Console::WriteLine( "[1,3]:   {0}", myArr2->GetValue( 1, 3 ) );
   
   // Creates and initializes a three-dimensional array.
   array<String^, 3>^myArr3 = gcnew array<String^,3>(5,5,5);
   
   // Sets the element at index 1,2,3.
   myArr3->SetValue( "one-two-three", 1, 2, 3 );
   Console::WriteLine( "[1,2,3]:   {0}", myArr3->GetValue( 1, 2, 3 ) );
   
   // Creates and initializes a seven-dimensional array.
   array<String^, 7>^myArr7 = gcnew array<String^,7>(5,5,5,5,5,5,5);
   
   // Sets the element at index 1,2,3,0,1,2,3.
   array<Int32>^myIndices = {1,2,3,0,1,2,3};
   myArr7->SetValue( "one-two-three-zero-one-two-three", myIndices );
   Console::WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7->GetValue( myIndices ) );
}

/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/
using System;

public class SamplesArray  {

   public static void Main()  {
 
      // Creates and initializes a one-dimensional array.
      String[] myArr1 = new String[5];

      // Sets the element at index 3.
      myArr1.SetValue( "three", 3 );
      Console.WriteLine( "[3]:   {0}", myArr1.GetValue( 3 ) );


      // Creates and initializes a two-dimensional array.
      String[,] myArr2 = new String[5,5];

      // Sets the element at index 1,3.
      myArr2.SetValue( "one-three", 1, 3 );
      Console.WriteLine( "[1,3]:   {0}", myArr2.GetValue( 1, 3 ) );


      // Creates and initializes a three-dimensional array.
      String[,,] myArr3 = new String[5,5,5];

      // Sets the element at index 1,2,3.
      myArr3.SetValue( "one-two-three", 1, 2, 3 );
      Console.WriteLine( "[1,2,3]:   {0}", myArr3.GetValue( 1, 2, 3 ) );


      // Creates and initializes a seven-dimensional array.
      String[,,,,,,] myArr7 = new String[5,5,5,5,5,5,5];

      // Sets the element at index 1,2,3,0,1,2,3.
      int[] myIndices = new int[7] { 1, 2, 3, 0, 1, 2, 3 };
      myArr7.SetValue( "one-two-three-zero-one-two-three", myIndices );
      Console.WriteLine( "[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue( myIndices ) );

   }
 
}


/* 
This code produces the following output.

[3]:   three
[1,3]:   one-three
[1,2,3]:   one-two-three
[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

*/

Public Class SamplesArray

   Public Shared Sub Main()

      ' Creates and initializes a one-dimensional array.
      Dim myArr1(4) As [String]

      ' Sets the element at index 3.
      myArr1.SetValue("three", 3)
      Console.WriteLine("[3]:   {0}", myArr1.GetValue(3))


      ' Creates and initializes a two-dimensional array.
      Dim myArr2(5, 5) As [String]

      ' Sets the element at index 1,3.
      myArr2.SetValue("one-three", 1, 3)
      Console.WriteLine("[1,3]:   {0}", myArr2.GetValue(1, 3))


      ' Creates and initializes a three-dimensional array.
      Dim myArr3(5, 5, 5) As [String]

      ' Sets the element at index 1,2,3.
      myArr3.SetValue("one-two-three", 1, 2, 3)
      Console.WriteLine("[1,2,3]:   {0}", myArr3.GetValue(1, 2, 3))


      ' Creates and initializes a seven-dimensional array.
      Dim myArr7(5, 5, 5, 5, 5, 5, 5) As [String]

      ' Sets the element at index 1,2,3,0,1,2,3.
      Dim myIndices() As Integer = {1, 2, 3, 0, 1, 2, 3}
      myArr7.SetValue("one-two-three-zero-one-two-three", myIndices)
      Console.WriteLine("[1,2,3,0,1,2,3]:   {0}", myArr7.GetValue(myIndices))

   End Sub

End Class


'This code produces the following output.
'
'[3]:   three
'[1,3]:   one-three
'[1,2,3]:   one-two-three
'[1,2,3,0,1,2,3]:   one-two-three-zero-one-two-three

Комментарии

Число элементов в indices должно равняться числу измерений в Array.The number of elements in indices must equal the number of dimensions in the Array. Все элементы массива indices должны совместно указывать расположение требуемого элемента в многомерном Array.All elements in the indices array must collectively specify the position of the desired element in the multidimensional Array.

Методы GetLowerBound и GetUpperBound могут определять, находятся ли индексы вне допустимого диапазона.The GetLowerBound and GetUpperBound methods can determine whether any of the indexes is out of bounds.

Этот метод является операцией O (1).This method is an O(1) operation.

Дополнительно

Применяется к