List<T>.Capacity List<T>.Capacity List<T>.Capacity List<T>.Capacity Property

Определение

Возвращает или задает общее число элементов, которые может вместить внутренняя структура данных без изменения размера.Gets or sets the total number of elements the internal data structure can hold without resizing.

public:
 property int Capacity { int get(); void set(int value); };
public int Capacity { get; set; }
member this.Capacity : int with get, set
Public Property Capacity As Integer

Значение свойства

Число элементов, которые может вместить коллекция List<T>, прежде чем потребуется изменить ее размер.The number of elements that the List<T> can contain before resizing is required.

Исключения

Для Capacity установлено значение, которое меньше Count.Capacity is set to a value that is less than Count.

Недостаточно свободной памяти в системе.There is not enough memory available on the system.

Примеры

Примечание

Некоторые примеры C# в этой статье выполняются во встроенном средстве выполнения кода и на тестовой площадке Try.NET.Some of the C# examples in this article run in the Try.NET inline code runner and playground. Когда на экране появится кнопка Выполнить, нажмите ее, чтобы выполнить пример в интерактивном окне.When present, select the Run button to run an example in an interactive window. После выполнения кода вы можете изменить его и выполнить измененный код, снова нажав на кнопку Выполнить.Once you execute the code, you can modify it and run the modified code by selecting Run again. Либо в интерактивном окне выполняется измененный код, либо, если компиляция завершается с ошибкой, в интерактивном окне отображаются все сообщения об ошибках компилятора C#.The modified code either runs in the interactive window or, if compilation fails, the interactive window displays all C# compiler error messages.

В следующем примере показано, как проверить емкость и количество элементов List<T> , содержащих простой бизнес-объект, и продемонстрировать TrimExcess использование метода для удаления дополнительной емкости.The following example demonstrates how to check the capacity and count of a List<T> that contains a simple business object, and illustrates using the TrimExcess method to remove extra capacity.

using System;
using System.Collections.Generic;
// Simple business object. A PartId is used to identify a part 
// but the part name be different for the same Id.
public class Part : IEquatable<Part>
{
    public string PartName { get; set; }
    public int PartId { get; set; }
    public override string ToString()
    {
        return "ID: " + PartId + "   Name: " + PartName;
    }
    public override bool Equals(object obj)
    {
        if (obj == null) return false;
        Part objAsPart = obj as Part;
        if (objAsPart == null) return false;
        else return Equals(objAsPart);
    }
    public override int GetHashCode()
    {
        return base.GetHashCode();
    }
    public bool Equals(Part other)
    {
        if (other == null) return false;
        return (this.PartId.Equals(other.PartId));
    }
    // Should also override == and != operators.

}
public class Example
{

    public static void Main()
    {
        List<Part> parts = new List<Part>();

        Console.WriteLine("\nCapacity: {0}", parts.Capacity);

        parts.Add(new Part() { PartName = "crank arm", PartId = 1234 });
        parts.Add(new Part() { PartName = "chain ring", PartId = 1334 });
        parts.Add(new Part() { PartName = "seat", PartId = 1434 });
        parts.Add(new Part() { PartName = "cassette", PartId = 1534 });
        parts.Add(new Part() { PartName = "shift lever", PartId = 1634 }); ;

        Console.WriteLine();
        foreach (Part aPart in parts)
        {
            Console.WriteLine(aPart);
        }

        Console.WriteLine("\nCapacity: {0}", parts.Capacity);
        Console.WriteLine("Count: {0}", parts.Count);

        parts.TrimExcess();
        Console.WriteLine("\nTrimExcess()");
        Console.WriteLine("Capacity: {0}", parts.Capacity);
        Console.WriteLine("Count: {0}", parts.Count);

        parts.Clear();
        Console.WriteLine("\nClear()");
        Console.WriteLine("Capacity: {0}", parts.Capacity);
        Console.WriteLine("Count: {0}", parts.Count);
    }
    /*
     This code example produces the following output. 
            Capacity: 0

            ID: 1234   Name: crank arm
            ID: 1334   Name: chain ring
            ID: 1434   Name: seat
            ID: 1534   Name: cassette
            ID: 1634   Name: shift lever

            Capacity: 8
            Count: 5

            TrimExcess()
            Capacity: 5
            Count: 5

            Clear()
            Capacity: 5
            Count: 0
     */
}
Imports System.Collections.Generic
' Simple business object. A PartId is used to identify a part 
' but the part name can change.
Public Class Part
    Implements IEquatable(Of Part)
    Public Property PartName() As String
        Get
            Return m_PartName
        End Get
        Set(value As String)
            m_PartName = Value
        End Set
    End Property
    Private m_PartName As String
    Public Property PartId() As Integer
        Get
            Return m_PartId
        End Get
        Set(value As Integer)
            m_PartId = Value
        End Set
    End Property
    Private m_PartId As Integer
    Public Overrides Function ToString() As String
        Return "ID: " & PartId & "   Name: " & PartName
    End Function
    Public Overrides Function Equals(obj As Object) As Boolean
        If obj Is Nothing Then
            Return False
        End If
        Dim objAsPart As Part = TryCast(obj, Part)
        If objAsPart Is Nothing Then
            Return False
        Else
            Return Equals(objAsPart)
        End If
    End Function
    Public Overrides Function GetHashCode() As Integer
        Return MyBase.GetHashCode()
    End Function
    Public Overloads Function Equals(other As Part) As Boolean Implements IEquatable(Of Part).Equals
        If other Is Nothing Then
            Return False
        End If
        Return (Me.PartId.Equals(other.PartId))
    End Function
    ' Should also override == and != operators.

End Class
Public Class Example

    Public Shared Sub Main()
        Dim parts As New List(Of Part)()

        Console.WriteLine(vbLf & "Capacity: {0}", parts.Capacity)

        ' Add parts to the list.
        parts.Add(New Part() With { _
             .PartName = "crank arm", _
             .PartId = 1234 _
        })
        parts.Add(New Part() With { _
             .PartName = "chain ring", _
             .PartId = 1334 _
        })
        parts.Add(New Part() With { _
             .PartName = "regular seat", _
             .PartId = 1434 _
        })
        parts.Add(New Part() With { _
             .PartName = "banana seat", _
             .PartId = 1444 _
        })
        parts.Add(New Part() With { _
             .PartName = "cassette", _
             .PartId = 1534 _
        })
        parts.Add(New Part() With { _
             .PartName = "shift lever", _
             .PartId = 1634 _
        })



        Console.WriteLine()
        For Each aPart As Part In parts
            Console.WriteLine(aPart)
        Next

        Console.WriteLine(vbLf & "Capacity: {0}", parts.Capacity)
        Console.WriteLine("Count: {0}", parts.Count)

        parts.TrimExcess()
        Console.WriteLine(vbLf & "TrimExcess()")
        Console.WriteLine("Capacity: {0}", parts.Capacity)
        Console.WriteLine("Count: {0}", parts.Count)

        parts.Clear()
        Console.WriteLine(vbLf & "Clear()")
        Console.WriteLine("Capacity: {0}", parts.Capacity)
        Console.WriteLine("Count: {0}", parts.Count)
    End Sub
    '
    '     This code example produces the following output. 
    '            Capacity: 0
    '
    '            ID: 1234   Name: crank arm
    '            ID: 1334   Name: chain ring
    '            ID: 1434   Name: seat
    '            ID: 1534   Name: cassette
    '            ID: 1634   Name: shift lever
    '
    '            Capacity: 8
    '            Count: 6
    '
    '            TrimExcess()
    '            Capacity: 6
    '            Count: 6
    '
    '            Clear()
    '            Capacity: 6
    '            Count: 0
    '     

End Class

В следующем примере показано Capacity свойство в нескольких точках жизненного цикла списка.The following example shows the Capacity property at several points in the life of a list. Конструктор без параметров используется для создания списка строк с емкостью 0, а Capacity свойство показывает это.The parameterless constructor is used to create a list of strings with a capacity of 0, and the Capacity property is displayed to demonstrate this. После того, как Capacity Count метод использовался для добавления нескольких элементов, элементы перечисляются, а затем свойство отображается снова вместе со свойством, чтобы показать, что емкость увеличилась по мере необходимости. AddAfter the Add method has been used to add several items, the items are listed, and then the Capacity property is displayed again, along with the Count property, to show that the capacity has been increased as needed.

Свойство отображается снова TrimExcess после использования метода для уменьшения емкости, соответствующей количеству. CapacityThe Capacity property is displayed again after the TrimExcess method is used to reduce the capacity to match the count. Наконец, Clear метод используется для удаления всех элементов из списка, Capacity а свойства и Count снова отображаются.Finally, the Clear method is used to remove all items from the list, and the Capacity and Count properties are displayed again.

using namespace System;
using namespace System::Collections::Generic;

void main()
{
    List<String^>^ dinosaurs = gcnew List<String^>();

    Console::WriteLine("\nCapacity: {0}", dinosaurs->Capacity);

    dinosaurs->Add("Tyrannosaurus");
    dinosaurs->Add("Amargasaurus");
    dinosaurs->Add("Mamenchisaurus");
    dinosaurs->Add("Deinonychus");
    dinosaurs->Add("Compsognathus");

    Console::WriteLine();
    for each(String^ dinosaur in dinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    Console::WriteLine("\nCapacity: {0}", dinosaurs->Capacity);
    Console::WriteLine("Count: {0}", dinosaurs->Count);

    Console::WriteLine("\nContains(\"Deinonychus\"): {0}",
        dinosaurs->Contains("Deinonychus"));

    Console::WriteLine("\nInsert(2, \"Compsognathus\")");
    dinosaurs->Insert(2, "Compsognathus");

    Console::WriteLine();
    for each(String^ dinosaur in dinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    Console::WriteLine("\ndinosaurs[3]: {0}", dinosaurs[3]);

    Console::WriteLine("\nRemove(\"Compsognathus\")");
    dinosaurs->Remove("Compsognathus");

    Console::WriteLine();
    for each(String^ dinosaur in dinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    dinosaurs->TrimExcess();
    Console::WriteLine("\nTrimExcess()");
    Console::WriteLine("Capacity: {0}", dinosaurs->Capacity);
    Console::WriteLine("Count: {0}", dinosaurs->Count);

    dinosaurs->Clear();
    Console::WriteLine("\nClear()");
    Console::WriteLine("Capacity: {0}", dinosaurs->Capacity);
    Console::WriteLine("Count: {0}", dinosaurs->Count);
}

/* This code example produces the following output:

Capacity: 0

Tyrannosaurus
Amargasaurus
Mamenchisaurus
Deinonychus
Compsognathus

Capacity: 8
Count: 5

Contains("Deinonychus"): True

Insert(2, "Compsognathus")

Tyrannosaurus
Amargasaurus
Compsognathus
Mamenchisaurus
Deinonychus
Compsognathus

dinosaurs[3]: Mamenchisaurus

Remove("Compsognathus")

Tyrannosaurus
Amargasaurus
Mamenchisaurus
Deinonychus
Compsognathus

TrimExcess()
Capacity: 5
Count: 5

Clear()
Capacity: 5
Count: 0
 */
List<string> dinosaurs = new List<string>();

Console.WriteLine("\nCapacity: {0}", dinosaurs.Capacity);

dinosaurs.Add("Tyrannosaurus");
dinosaurs.Add("Amargasaurus");
dinosaurs.Add("Mamenchisaurus");
dinosaurs.Add("Deinonychus");
dinosaurs.Add("Compsognathus");
Console.WriteLine();
foreach(string dinosaur in dinosaurs)
{
    Console.WriteLine(dinosaur);
}

Console.WriteLine("\nCapacity: {0}", dinosaurs.Capacity);
Console.WriteLine("Count: {0}", dinosaurs.Count);

Console.WriteLine("\nContains(\"Deinonychus\"): {0}",
    dinosaurs.Contains("Deinonychus"));

Console.WriteLine("\nInsert(2, \"Compsognathus\")");
dinosaurs.Insert(2, "Compsognathus");

Console.WriteLine();
foreach(string dinosaur in dinosaurs)
{
    Console.WriteLine(dinosaur);
}

// Shows accessing the list using the Item property.
Console.WriteLine("\ndinosaurs[3]: {0}", dinosaurs[3]);

Console.WriteLine("\nRemove(\"Compsognathus\")");
dinosaurs.Remove("Compsognathus");

Console.WriteLine();
foreach(string dinosaur in dinosaurs)
{
    Console.WriteLine(dinosaur);
}

dinosaurs.TrimExcess();
Console.WriteLine("\nTrimExcess()");
Console.WriteLine("Capacity: {0}", dinosaurs.Capacity);
Console.WriteLine("Count: {0}", dinosaurs.Count);

dinosaurs.Clear();
Console.WriteLine("\nClear()");
Console.WriteLine("Capacity: {0}", dinosaurs.Capacity);
Console.WriteLine("Count: {0}", dinosaurs.Count);

/* This code example produces the following output:

Capacity: 0

Tyrannosaurus
Amargasaurus
Mamenchisaurus
Deinonychus
Compsognathus

Capacity: 8
Count: 5

Contains("Deinonychus"): True

Insert(2, "Compsognathus")

Tyrannosaurus
Amargasaurus
Compsognathus
Mamenchisaurus
Deinonychus
Compsognathus

dinosaurs[3]: Mamenchisaurus

Remove("Compsognathus")

Tyrannosaurus
Amargasaurus
Mamenchisaurus
Deinonychus
Compsognathus

TrimExcess()
Capacity: 5
Count: 5

Clear()
Capacity: 5
Count: 0
 */
Imports System
Imports System.Collections.Generic

Public Class Example

    Public Shared Sub Main()
        Dim dinosaurs As New List(Of String)

        Console.WriteLine(vbLf & "Capacity: {0}", dinosaurs.Capacity)

        dinosaurs.Add("Tyrannosaurus")
        dinosaurs.Add("Amargasaurus")
        dinosaurs.Add("Mamenchisaurus")
        dinosaurs.Add("Deinonychus")
        dinosaurs.Add("Compsognathus")

        Console.WriteLine()
        For Each dinosaur As String In dinosaurs
            Console.WriteLine(dinosaur)
        Next

        Console.WriteLine(vbLf & "Capacity: {0}", dinosaurs.Capacity)
        Console.WriteLine("Count: {0}", dinosaurs.Count)

        Console.WriteLine(vbLf & "Contains(""Deinonychus""): {0}", _
            dinosaurs.Contains("Deinonychus"))

        Console.WriteLine(vbLf & "Insert(2, ""Compsognathus"")")
        dinosaurs.Insert(2, "Compsognathus")

        Console.WriteLine()
        For Each dinosaur As String In dinosaurs
            Console.WriteLine(dinosaur)
        Next
        ' Shows how to access the list using the Item property.
        Console.WriteLine(vbLf & "dinosaurs(3): {0}", dinosaurs(3))
        Console.WriteLine(vbLf & "Remove(""Compsognathus"")")
        dinosaurs.Remove("Compsognathus")

        Console.WriteLine()
        For Each dinosaur As String In dinosaurs
            Console.WriteLine(dinosaur)
        Next

        dinosaurs.TrimExcess()
        Console.WriteLine(vbLf & "TrimExcess()")
        Console.WriteLine("Capacity: {0}", dinosaurs.Capacity)
        Console.WriteLine("Count: {0}", dinosaurs.Count)

        dinosaurs.Clear()
        Console.WriteLine(vbLf & "Clear()")
        Console.WriteLine("Capacity: {0}", dinosaurs.Capacity)
        Console.WriteLine("Count: {0}", dinosaurs.Count)
    End Sub
End Class

' This code example produces the following output:
'
'Capacity: 0
'
'Tyrannosaurus
'Amargasaurus
'Mamenchisaurus
'Deinonychus
'Compsognathus
'
'Capacity: 8
'Count: 5
'
'Contains("Deinonychus"): True
'
'Insert(2, "Compsognathus")
'
'Tyrannosaurus
'Amargasaurus
'Compsognathus
'Mamenchisaurus
'Deinonychus
'Compsognathus
'
'dinosaurs(3): Mamenchisaurus
'
'Remove("Compsognathus")
'
'Tyrannosaurus
'Amargasaurus
'Mamenchisaurus
'Deinonychus
'Compsognathus
'
'TrimExcess()
'Capacity: 5
'Count: 5
'
'Clear()
'Capacity: 5
'Count: 0

[<EntryPoint>]
let main argv = 
    // We refer to System.Collections.Generic.List<'T> by its type 
    // abbreviation ResizeArray<'T> to avoid conflict with the List module.    
    // Note: In F# code, F# linked lists are usually preferred over
    // ResizeArray<'T> when an extendable collection is required.
    let dinosaurs = ResizeArray<_>()
 
    // Write out the dinosaurs in the ResizeArray.
    let printDinosaurs() =
        printfn ""
        dinosaurs |> Seq.iter (fun p -> printfn "%O" p) 
 
    
    printfn "\nCapacity: %i" dinosaurs.Capacity
 
    dinosaurs.Add("Tyrannosaurus")
    dinosaurs.Add("Amargasaurus")
    dinosaurs.Add("Mamenchisaurus")
    dinosaurs.Add("Deinonychus")
    dinosaurs.Add("Compsognathus")
 
    printDinosaurs()
 
    printfn "\nCapacity: %i" dinosaurs.Capacity
    printfn "Count: %i" dinosaurs.Count
 
    printfn "\nContains(\"Deinonychus\"): %b" (dinosaurs.Contains("Deinonychus"))
 
    printfn "\nInsert(2, \"Compsognathus\")"
    dinosaurs.Insert(2, "Compsognathus")
 
    printDinosaurs()
 
    // Shows accessing the list using the Item property.
    printfn "\ndinosaurs[3]: %s" dinosaurs.[3]
 
    printfn "\nRemove(\"Compsognathus\")"
    dinosaurs.Remove("Compsognathus") |> ignore
 
    printDinosaurs()
 
    dinosaurs.TrimExcess()
    printfn "\nTrimExcess()"
    printfn "Capacity: %i" dinosaurs.Capacity
    printfn "Count: %i" dinosaurs.Count
 
    dinosaurs.Clear()
    printfn "\nClear()"
    printfn "Capacity: %i" dinosaurs.Capacity
    printfn "Count: %i" dinosaurs.Count
 
    0 // return an integer exit code
 
    (* This code example produces the following output:
 
Capacity: 0
 
Tyrannosaurus
Amargasaurus
Mamenchisaurus
Deinonychus
Compsognathus
 
Capacity: 8
Count: 5
 
Contains("Deinonychus"): true
 
Insert(2, "Compsognathus")
 
Tyrannosaurus
Amargasaurus
Compsognathus
Mamenchisaurus
Deinonychus
Compsognathus
 
dinosaurs[3]: Mamenchisaurus
 
Remove("Compsognathus")
 
Tyrannosaurus
Amargasaurus
Mamenchisaurus
Deinonychus
Compsognathus
 
TrimExcess()
Capacity: 5
Count: 5
 
Clear()
Capacity: 5
Count: 0
    *)

Комментарии

Capacityчисло элементов, которое List<T> может храниться до изменения размера, в Count то время как — это количество элементов List<T>, которые фактически находятся в.Capacity is the number of elements that the List<T> can store before resizing is required, whereas Count is the number of elements that are actually in the List<T>.

Capacityвсегда больше или равно Count.Capacity is always greater than or equal to Count. Если Count превышено Capacity время добавления элементов, емкость увеличивается путем автоматического перераспределения внутреннего массива перед копированием старых элементов и добавлением новых элементов.If Count exceeds Capacity while adding elements, the capacity is increased by automatically reallocating the internal array before copying the old elements and adding the new elements.

Если емкость значительно больше List<T>, чем число, и необходимо уменьшить объем памяти, используемой объектом, можно уменьшить емкость, TrimExcess вызвав Capacity метод или явно задав для свойства более низкое значение.If the capacity is significantly larger than the count and you want to reduce the memory used by the List<T>, you can decrease capacity by calling the TrimExcess method or by setting the Capacity property explicitly to a lower value. Если значение Capacity задано явно, внутренний массив также перераспределяется в соответствии с заданной емкостью, и все элементы копируются.When the value of Capacity is set explicitly, the internal array is also reallocated to accommodate the specified capacity, and all the elements are copied.

Получение значения этого свойства является операцией O (1); Задание свойства является операцией O (n), где n — это новая емкость.Retrieving the value of this property is an O(1) operation; setting the property is an O(n) operation, where n is the new capacity.

Применяется к

Дополнительно