Console.SetWindowPosition(Int32, Int32) Console.SetWindowPosition(Int32, Int32) Console.SetWindowPosition(Int32, Int32) Console.SetWindowPosition(Int32, Int32) Method

Определение

Задает позицию окна консоли относительно буфера экрана.Sets the position of the console window relative to the screen buffer.

public:
 static void SetWindowPosition(int left, int top);
public static void SetWindowPosition (int left, int top);
static member SetWindowPosition : int * int -> unit
Public Shared Sub SetWindowPosition (left As Integer, top As Integer)

Параметры

left
Int32 Int32 Int32 Int32

Позиция столбца верхнего левого угла окна консоли.The column position of the upper left corner of the console window.

top
Int32 Int32 Int32 Int32

Позиция строки левого верхнего угла окна консоли.The row position of the upper left corner of the console window.

Исключения

Значение параметра left или top меньше нуля.left or top is less than zero.

-или--or- left + WindowWidth больше BufferWidth.left + WindowWidth is greater than BufferWidth.

-или--or- top + WindowHeight больше BufferHeight.top + WindowHeight is greater than BufferHeight.

Данный пользователь не имеет разрешения на выполнение этого действия.The user does not have permission to perform this action.

Ошибка ввода/вывода.An I/O error occurred.

Текущая операционная система не является системой Windows.The current operating system is not Windows.

Примеры

В следующем примере демонстрируется WindowLeft, WindowTop, WindowWidth, WindowHeight, BufferWidth, BufferHeight, и CursorVisible свойства; и SetWindowPosition, SetBufferSize, и ReadKey методы.The following example demonstrates the WindowLeft, WindowTop, WindowWidth, WindowHeight, BufferWidth, BufferHeight, and CursorVisible properties; and the SetWindowPosition, SetBufferSize, and ReadKey methods. В примере рисуется сетку в буфере экрана, на основе ширины буфера экрана.The example draws a grid pattern in the screen buffer based on the screen buffer width. Затем в примере перемещается окно консоли, в ответ, к которому стрелка вверх, нажатия клавиш консоли стрелка вниз, Стрелка влево или Стрелка вправо.Then the example moves the console window in response to which of the UP ARROW, DOWN ARROW, LEFT ARROW, or RIGHT ARROW console keys is pressed. Сетка помогает см. в разделе Перемещение окна консоли относительно буфера экрана.The grid pattern helps you see the movement of the console window relative to the screen buffer.

// This example demonstrates the Console.WindowLeft and
//                               Console.WindowTop properties.
using namespace System;
using namespace System::Text;
using namespace System::IO;

//
int saveBufferWidth;
int saveBufferHeight;
int saveWindowHeight;
int saveWindowWidth;
bool saveCursorVisible;

//
int main()
{
   String^ m1 = "1) Press the cursor keys to move the console window.\n"
   "2) Press any key to begin. When you're finished...\n"
   "3) Press the Escape key to quit.";
   String^ g1 = "+----";
   String^ g2 = "|    ";
   String^ grid1;
   String^ grid2;
   StringBuilder^ sbG1 = gcnew StringBuilder;
   StringBuilder^ sbG2 = gcnew StringBuilder;
   ConsoleKeyInfo cki;
   int y;
   
   //
   try
   {
      saveBufferWidth = Console::BufferWidth;
      saveBufferHeight = Console::BufferHeight;
      saveWindowHeight = Console::WindowHeight;
      saveWindowWidth = Console::WindowWidth;
      saveCursorVisible = Console::CursorVisible;
      
      //
      Console::Clear();
      Console::WriteLine( m1 );
      Console::ReadKey( true );
      
      // Set the smallest possible window size before setting the buffer size.
      Console::SetWindowSize( 1, 1 );
      Console::SetBufferSize( 80, 80 );
      Console::SetWindowSize( 40, 20 );
      
      // Create grid lines to fit the buffer. (The buffer width is 80, but
      // this same technique could be used with an arbitrary buffer width.)
      for ( y = 0; y < Console::BufferWidth / g1->Length; y++ )
      {
         sbG1->Append( g1 );
         sbG2->Append( g2 );

      }
      sbG1->Append( g1, 0, Console::BufferWidth % g1->Length );
      sbG2->Append( g2, 0, Console::BufferWidth % g2->Length );
      grid1 = sbG1->ToString();
      grid2 = sbG2->ToString();
      Console::CursorVisible = false;
      Console::Clear();
      for ( y = 0; y < Console::BufferHeight - 1; y++ )
      {
         if ( y % 3 == 0 )
                  Console::Write( grid1 );
         else
                  Console::Write( grid2 );

      }
      Console::SetWindowPosition( 0, 0 );
      do
      {
         cki = Console::ReadKey( true );
         switch ( cki.Key )
         {
            case ConsoleKey::LeftArrow:
               if ( Console::WindowLeft > 0 )
                              Console::SetWindowPosition( Console::WindowLeft - 1, Console::WindowTop );
               break;

            case ConsoleKey::UpArrow:
               if ( Console::WindowTop > 0 )
                              Console::SetWindowPosition( Console::WindowLeft, Console::WindowTop - 1 );
               break;

            case ConsoleKey::RightArrow:
               if ( Console::WindowLeft < (Console::BufferWidth - Console::WindowWidth) )
                              Console::SetWindowPosition( Console::WindowLeft + 1, Console::WindowTop );
               break;

            case ConsoleKey::DownArrow:
               if ( Console::WindowTop < (Console::BufferHeight - Console::WindowHeight) )
                              Console::SetWindowPosition( Console::WindowLeft, Console::WindowTop + 1 );
               break;
         }
      }
      while ( cki.Key != ConsoleKey::Escape );
   }
   catch ( IOException^ e ) 
   {
      Console::WriteLine( e->Message );
   }
   finally
   {
      Console::Clear();
      Console::SetWindowSize( 1, 1 );
      Console::SetBufferSize( saveBufferWidth, saveBufferHeight );
      Console::SetWindowSize( saveWindowWidth, saveWindowHeight );
      Console::CursorVisible = saveCursorVisible;
   }

} // end Main


/*
This example produces results similar to the following:

1) Press the cursor keys to move the console window.
2) Press any key to begin. When you're finished...
3) Press the Escape key to quit.

...

+----+----+----+-
|    |    |    |
|    |    |    |
+----+----+----+-
|    |    |    |
|    |    |    |
+----+----+----+-

*/
// This example demonstrates the Console.WindowLeft and
//                               Console.WindowTop properties.
using System;
using System.Text;
using System.IO;
//
class Sample 
{
    public static int saveBufferWidth;
    public static int saveBufferHeight;
    public static int saveWindowHeight;
    public static int saveWindowWidth;
    public static bool saveCursorVisible;
//
    public static void Main() 
    {
    string m1 = "1) Press the cursor keys to move the console window.\n" +
                "2) Press any key to begin. When you're finished...\n" +
                "3) Press the Escape key to quit.";
    string g1 = "+----";
    string g2 = "|    ";
    string grid1;
    string grid2;
    StringBuilder sbG1 = new StringBuilder();
    StringBuilder sbG2 = new StringBuilder();
    ConsoleKeyInfo cki;
    int y;
//
    try 
    {
    saveBufferWidth  = Console.BufferWidth;
    saveBufferHeight = Console.BufferHeight;
    saveWindowHeight = Console.WindowHeight;
    saveWindowWidth  = Console.WindowWidth;
    saveCursorVisible = Console.CursorVisible;
//
    Console.Clear();
    Console.WriteLine(m1);
    Console.ReadKey(true);

// Set the smallest possible window size before setting the buffer size.
    Console.SetWindowSize(1, 1);
    Console.SetBufferSize(80, 80);
    Console.SetWindowSize(40, 20);

// Create grid lines to fit the buffer. (The buffer width is 80, but
// this same technique could be used with an arbitrary buffer width.)
    for (y = 0; y < Console.BufferWidth/g1.Length; y++)
        {
        sbG1.Append(g1);
        sbG2.Append(g2);
        }
    sbG1.Append(g1, 0, Console.BufferWidth%g1.Length);
    sbG2.Append(g2, 0, Console.BufferWidth%g2.Length);
    grid1 = sbG1.ToString();
    grid2 = sbG2.ToString();

    Console.CursorVisible = false;
    Console.Clear();
    for (y = 0; y < Console.BufferHeight-1; y++)
        {
        if (y%3 == 0)
            Console.Write(grid1);
        else
            Console.Write(grid2);
        }

    Console.SetWindowPosition(0, 0);
    do
        {
        cki = Console.ReadKey(true);
        switch (cki.Key) 
            {
            case ConsoleKey.LeftArrow:
                if (Console.WindowLeft > 0) 
                    Console.SetWindowPosition(
                            Console.WindowLeft-1, Console.WindowTop);
                break;
            case ConsoleKey.UpArrow:
                if (Console.WindowTop > 0) 
                    Console.SetWindowPosition(
                            Console.WindowLeft, Console.WindowTop-1);
                break;
            case ConsoleKey.RightArrow:
                if (Console.WindowLeft < (Console.BufferWidth-Console.WindowWidth)) 
                    Console.SetWindowPosition(
                            Console.WindowLeft+1, Console.WindowTop);
                break;
            case ConsoleKey.DownArrow:
                if (Console.WindowTop < (Console.BufferHeight-Console.WindowHeight)) 
                    Console.SetWindowPosition(
                            Console.WindowLeft, Console.WindowTop+1);
                break;
            }
        } 
    while (cki.Key != ConsoleKey.Escape);  // end do-while
    } // end try
    catch (IOException e) 
        {
        Console.WriteLine(e.Message);
        }
    finally 
        {
        Console.Clear();
        Console.SetWindowSize(1, 1);
        Console.SetBufferSize(saveBufferWidth, saveBufferHeight);
        Console.SetWindowSize(saveWindowWidth, saveWindowHeight);
        Console.CursorVisible = saveCursorVisible;
        }
    } // end Main
} // end Sample
/*
This example produces results similar to the following:

1) Press the cursor keys to move the console window.
2) Press any key to begin. When you're finished...
3) Press the Escape key to quit.

...

+----+----+----+-
|    |    |    |
|    |    |    |
+----+----+----+-
|    |    |    |
|    |    |    |
+----+----+----+-

*/
' This example demonstrates the Console.WindowLeft and
'                               Console.WindowTop properties.
Imports System.IO
Imports System.Text

Class Sample
   Public Shared saveBufferWidth As Integer
   Public Shared saveBufferHeight As Integer
   Public Shared saveWindowHeight As Integer
   Public Shared saveWindowWidth As Integer
   Public Shared saveCursorVisible As Boolean
   
   Public Shared Sub Main()
      Dim m1 As String = _
          "1) Press the cursor keys to move the console window." & vbCrlf & _
          "2) Press any key to begin. When you're finished..."   & vbCrlf & _
          "3) Press the Escape key to quit."
      Dim g1 As String = "+----"
      Dim g2 As String = "|    "
      Dim grid1 As String
      Dim grid2 As String
      Dim sbG1 As New StringBuilder()
      Dim sbG2 As New StringBuilder()
      Dim cki As ConsoleKeyInfo
      Dim y As Integer
      '
      Try
         saveBufferWidth = Console.BufferWidth
         saveBufferHeight = Console.BufferHeight
         saveWindowHeight = Console.WindowHeight
         saveWindowWidth = Console.WindowWidth
         saveCursorVisible = Console.CursorVisible
         '
         Console.Clear()
         Console.WriteLine(m1)
         Console.ReadKey(True)
         
         ' Set the smallest possible window size before setting the buffer size.
         Console.SetWindowSize(1, 1)
         Console.SetBufferSize(80, 80)
         Console.SetWindowSize(40, 20)
         
         ' Create grid lines to fit the buffer. (The buffer width is 80, but
         ' this same technique could be used with an arbitrary buffer width.)
         For y = 0 To (Console.BufferWidth / g1.Length) - 1
            sbG1.Append(g1)
            sbG2.Append(g2)
         Next y
         sbG1.Append(g1, 0, Console.BufferWidth Mod g1.Length)
         sbG2.Append(g2, 0, Console.BufferWidth Mod g2.Length)
         grid1 = sbG1.ToString()
         grid2 = sbG2.ToString()
         
         Console.CursorVisible = False
         Console.Clear()
         For y = 0 To (Console.BufferHeight - 2)
            If y Mod 3 = 0 Then
               Console.Write(grid1)
            Else
               Console.Write(grid2)
            End If
         Next y 
         '
         Console.SetWindowPosition(0, 0)
         Do
            cki = Console.ReadKey(True)
            Select Case cki.Key
               Case ConsoleKey.LeftArrow
                  If Console.WindowLeft > 0 Then
                     Console.SetWindowPosition(Console.WindowLeft - 1, Console.WindowTop)
                  End If
               Case ConsoleKey.UpArrow
                  If Console.WindowTop > 0 Then
                     Console.SetWindowPosition(Console.WindowLeft, Console.WindowTop - 1)
                  End If
               Case ConsoleKey.RightArrow
                  If Console.WindowLeft < Console.BufferWidth - Console.WindowWidth Then
                     Console.SetWindowPosition(Console.WindowLeft + 1, Console.WindowTop)
                  End If
               Case ConsoleKey.DownArrow
                  If Console.WindowTop < Console.BufferHeight - Console.WindowHeight Then
                     Console.SetWindowPosition(Console.WindowLeft, Console.WindowTop + 1)
                  End If
            End Select
         Loop While cki.Key <> ConsoleKey.Escape
      ' end do-while
      ' end try
      Catch e As IOException
         Console.WriteLine(e.Message)
      Finally
         Console.Clear()
         Console.SetWindowSize(1, 1)
         Console.SetBufferSize(saveBufferWidth, saveBufferHeight)
         Console.SetWindowSize(saveWindowWidth, saveWindowHeight)
         Console.CursorVisible = saveCursorVisible
      End Try
   End Sub 'Main ' end Main
End Class 'Sample ' end Sample
'
'This example produces results similar to the following:
'
'1) Press the cursor keys to move the console window.
'2) Press any key to begin. When you're finished...
'3) Press the Escape key to quit.
'
'...
'
'+----+----+----+-
'|    |    |    |
'|    |    |    |
'+----+----+----+-
'|    |    |    |
'|    |    |    |
'+----+----+----+-
'

Комментарии

В окне операционной системы отображаются в окне консоли, и в окне консоли отобразятся часть буфера экрана.The operating system window displays the console window, and the console window displays a portion of the screen buffer. SetWindowPosition Метод влияет на позицию окна консоли относительно буфера экрана, но не влияет на позицию окна операционной системы относительно рабочего стола.The SetWindowPosition method affects the position of the console window relative to the screen buffer, but does not affect the position of the operating system window relative to the desktop.

Окна консоли и операционной системы обычно не влияют друг с другом.The console and operating system windows generally do not affect each other. Тем не менее если не удается отобразить буфера экрана в границах текущего окна консоли, операционная система автоматически добавляет полосы прокрутки окна операционной системы.However, if the screen buffer cannot be displayed in the current boundaries of the console window, the operating system automatically appends scroll bars to the operating system window. В этом случае перемещение полос прокрутки окна операционной системы влияет на позицию окна консоли, и перемещение окна консоли с SetWindowPosition метод влияет на положение полос прокрутки окна операционной системы.In that case, moving the operating system window scroll bars affects the position of the console window, and moving the console window with the SetWindowPosition method affects the position of the operating system window scroll bars.

Безопасность

UIPermission
для изменения безопасные окна верхнего уровня и подокнах.for modifying safe top-level windows and subwindows. Связанное перечисление: SafeTopLevelWindowsAssociated enumeration: SafeTopLevelWindows

Применяется к