ExceptionHandlingClauseOptions ExceptionHandlingClauseOptions ExceptionHandlingClauseOptions ExceptionHandlingClauseOptions Enum

Определение

Идентифицирует виды предложений для обработки исключений.Identifies kinds of exception-handling clauses.

Это перечисление имеет атрибут FlagsAttribute, который разрешает побитовое сочетание значений его элементов.

public enum class ExceptionHandlingClauseOptions
[System.Flags]
[System.Runtime.InteropServices.ComVisible(true)]
public enum ExceptionHandlingClauseOptions
type ExceptionHandlingClauseOptions = 
Public Enum ExceptionHandlingClauseOptions
Наследование
ExceptionHandlingClauseOptionsExceptionHandlingClauseOptionsExceptionHandlingClauseOptionsExceptionHandlingClauseOptions
Атрибуты

Поля

Clause Clause Clause Clause 0

Это предложение принимает все исключения, которые являются производными от заданного типа.The clause accepts all exceptions that derive from a specified type.

Fault Fault Fault Fault 4

Это предложение выполняется при возникновении исключения, но не по завершении нормального потока управления.The clause is executed if an exception occurs, but not on completion of normal control flow.

Filter Filter Filter Filter 1

Это предложение содержит пользовательские инструкции, которые определяют, должно исключение игнорироваться (другими словами, должно ли быть возобновлено обычное выполнение), обрабатываться сопоставленным обработчиком или передаваться в следующее предложение.The clause contains user-specified instructions that determine whether the exception should be ignored (that is, whether normal execution should resume), be handled by the associated handler, or be passed on to the next clause.

Finally Finally Finally Finally 2

Это предложение выполняется при существовании блока "try" в обычном потоке управления или при возникновении необработанного исключения.The clause is executed whenever the try block exits, whether through normal control flow or because of an unhandled exception.

Примеры

В следующем примере кода определяется метод теста с именем MethodBodyExampleи отображаются сведения о его локальной переменной и предложениях по обработке исключений.The following code example defines a test method named MethodBodyExample, and displays its local variable information and exception-handling clauses. Метод используется для MethodBody получения объекта для метода теста. MethodBase.GetMethodBodyThe MethodBase.GetMethodBody method is used to obtain a MethodBody object for the test method. Свойство используется для получения ExceptionHandlingClause списка объектов и вывода их свойств. ExceptionHandlingClausesThe ExceptionHandlingClauses property is used to obtain a list of ExceptionHandlingClause objects and display their properties.

Примечание

Не все языки компьютеров могут создавать предложения фильтра.Not all computer languages can generate Filter clauses. В Visual Basic примере показано предложение фильтра с помощью выражения Visual Basic When , которое опускается из примеров для других языков.The Visual Basic example shows a filter clause, using a Visual Basic When expression, which is omitted from the examples for other languages.

Этот код является частью большого примера, MethodBody приведенного для класса.This code is part of a larger example provided for the MethodBody class.

#using <System.dll>

using namespace System;
using namespace System::Reflection;

public ref class Example
{
    // The Main method contains code to analyze this method, using
    // the properties and methods of the MethodBody class.
public:
    void MethodBodyExample(Object^ arg)
    {
        // Define some local variables. In addition to these variables,
        // the local variable list includes the variables scoped to 
        // the catch clauses.
        int var1 = 42;
        String^ var2 = "Forty-two";

        try
        {
            // Depending on the input value, throw an ArgumentException or 
            // an ArgumentNullException to test the Catch clauses.
            if (arg == nullptr)
            {
                throw gcnew ArgumentNullException("The argument cannot " +
                    "be null.");
            }
            if (arg->GetType() == String::typeid)
            {
                throw gcnew ArgumentException("The argument cannot " + 
                    "be a string.");
            }        
        }

        // There is no Filter clause in this code example. See the Visual 
        // Basic code for an example of a Filter clause.

        // This catch clause handles the ArgumentException class, and
        // any other class derived from Exception.
        catch (ArgumentException^ ex)
        {
            Console::WriteLine("Ordinary exception-handling clause caught:" +
                " {0}", ex->GetType());
        }        
        finally
        {
            var1 = 3033;
            var2 = "Another string.";
        }
    }
};

int main()
{ 
    // Get method body information.
    MethodInfo^ mi = 
        Example::typeid->GetMethod("MethodBodyExample");

    MethodBody^ mb = mi->GetMethodBody();
    Console::WriteLine("\r\nMethod: {0}", mi);

    // Display the general information included in the 
    // MethodBody object.
    Console::WriteLine("    Local variables are initialized: {0}", 
        mb->InitLocals);
    Console::WriteLine("    Maximum number of items on the operand " +
        "stack: {0}", mb->MaxStackSize);
using System;
using System.Reflection;

public class Example
{
    public static void Main()
    {
        // Get method body information.
        MethodInfo mi = typeof(Example).GetMethod("MethodBodyExample");
        MethodBody mb = mi.GetMethodBody();
        Console.WriteLine("\r\nMethod: {0}", mi);

        // Display the general information included in the 
        // MethodBody object.
        Console.WriteLine("    Local variables are initialized: {0}", 
            mb.InitLocals);
        Console.WriteLine("    Maximum number of items on the operand stack: {0}", 
            mb.MaxStackSize);
Imports System.Reflection

Public Class Example

    Public Shared Sub Main()

        ' Demonstrate the effect of the Visual Basic When keyword, which
        ' generates a Filter clause in the Try block.
        Dim e As New Example()
        Console.WriteLine()
        e.MethodBodyExample("String argument")
        e.MethodBodyExample(Nothing)

        ' Get method body information.
        Dim mi As MethodInfo = _
            GetType(Example).GetMethod("MethodBodyExample")
        Dim mb As MethodBody = mi.GetMethodBody()
        Console.WriteLine(vbCrLf & "Method: {0}", mi)

        ' Display the general information included in the 
        ' MethodBody object.
        Console.WriteLine("    Local variables are initialized: {0}", _
            mb.InitLocals)
        Console.WriteLine("    Maximum number of items on the operand stack: {0}", _
            mb.MaxStackSize)

// Display exception handling clauses.
Console::WriteLine();
for each(ExceptionHandlingClause^ exhc in mb->ExceptionHandlingClauses)
{
    Console::WriteLine(exhc->Flags.ToString());

    // The FilterOffset property is meaningful only for Filter
    // clauses. The CatchType property is not meaningful for 
    // Filter or Finally clauses. 
    switch(exhc->Flags)
    {
    case ExceptionHandlingClauseOptions::Filter:
        Console::WriteLine("        Filter Offset: {0}", 
            exhc->FilterOffset);
        break;
    case ExceptionHandlingClauseOptions::Finally:
        break;
    default:
        Console::WriteLine("    Type of exception: {0}", 
            exhc->CatchType);
        break;
    }

    Console::WriteLine("       Handler Length: {0}",
        exhc->HandlerLength);
    Console::WriteLine("       Handler Offset: {0}", 
        exhc->HandlerOffset);
    Console::WriteLine("     Try Block Length: {0}", exhc->TryLength);
    Console::WriteLine("     Try Block Offset: {0}", exhc->TryOffset);
}

// Display exception handling clauses.
Console.WriteLine();
foreach (ExceptionHandlingClause ehc in mb.ExceptionHandlingClauses)
{
    Console.WriteLine(ehc.Flags.ToString());

    // The FilterOffset property is meaningful only for Filter
    // clauses. The CatchType property is not meaningful for 
    // Filter or Finally clauses. 
    switch (ehc.Flags)
    {
        case ExceptionHandlingClauseOptions.Filter:
            Console.WriteLine("        Filter Offset: {0}", 
                ehc.FilterOffset);
            break;
        case ExceptionHandlingClauseOptions.Finally:
            break;
        default:
            Console.WriteLine("    Type of exception: {0}", 
                ehc.CatchType);
            break;
    }

    Console.WriteLine("       Handler Length: {0}", ehc.HandlerLength);
    Console.WriteLine("       Handler Offset: {0}", ehc.HandlerOffset);
    Console.WriteLine("     Try Block Length: {0}", ehc.TryLength);
    Console.WriteLine("     Try Block Offset: {0}", ehc.TryOffset);
}

' Display exception handling clauses.
Console.WriteLine()
For Each ehc As ExceptionHandlingClause In mb.ExceptionHandlingClauses
    Console.WriteLine(ehc.Flags.ToString())

    ' The FilterOffset property is meaningful only for Filter
    ' clauses. The CatchType property is not meaningful for 
    ' Filter or Finally clauses. 
    Select Case ehc.Flags
        Case ExceptionHandlingClauseOptions.Filter
            Console.WriteLine("        Filter Offset: {0}", _
                ehc.FilterOffset)
        Case ExceptionHandlingClauseOptions.Finally
        Case Else
            Console.WriteLine("    Type of exception: {0}", _
                ehc.CatchType)
    End Select

    Console.WriteLine("       Handler Length: {0}", ehc.HandlerLength)
    Console.WriteLine("       Handler Offset: {0}", ehc.HandlerOffset)
    Console.WriteLine("     Try Block Length: {0}", ehc.TryLength)
    Console.WriteLine("     Try Block Offset: {0}", ehc.TryOffset)
Next
    // The Main method contains code to analyze this method, using
    // the properties and methods of the MethodBody class.
public:
    void MethodBodyExample(Object^ arg)
    {
        // Define some local variables. In addition to these variables,
        // the local variable list includes the variables scoped to 
        // the catch clauses.
        int var1 = 42;
        String^ var2 = "Forty-two";

        try
        {
            // Depending on the input value, throw an ArgumentException or 
            // an ArgumentNullException to test the Catch clauses.
            if (arg == nullptr)
            {
                throw gcnew ArgumentNullException("The argument cannot " +
                    "be null.");
            }
            if (arg->GetType() == String::typeid)
            {
                throw gcnew ArgumentException("The argument cannot " + 
                    "be a string.");
            }        
        }

        // There is no Filter clause in this code example. See the Visual 
        // Basic code for an example of a Filter clause.

        // This catch clause handles the ArgumentException class, and
        // any other class derived from Exception.
        catch (ArgumentException^ ex)
        {
            Console::WriteLine("Ordinary exception-handling clause caught:" +
                " {0}", ex->GetType());
        }        
        finally
        {
            var1 = 3033;
            var2 = "Another string.";
        }
    }
    }

    // The Main method contains code to analyze this method, using
    // the properties and methods of the MethodBody class.
    public void MethodBodyExample(object arg)
    {
        // Define some local variables. In addition to these variables,
        // the local variable list includes the variables scoped to 
        // the catch clauses.
        int var1 = 42;
        string var2 = "Forty-two";

        try
        {
            // Depending on the input value, throw an ArgumentException or 
            // an ArgumentNullException to test the Catch clauses.
            if (arg == null)
            {
                throw new ArgumentNullException("The argument cannot be null.");
            }
            if (arg.GetType() == typeof(string))
            {
                throw new ArgumentException("The argument cannot be a string.");
            }        
        }

        // There is no Filter clause in this code example. See the Visual 
        // Basic code for an example of a Filter clause.

        // This catch clause handles the ArgumentException class, and
        // any other class derived from Exception.
        catch(Exception ex)
        {
            Console.WriteLine("Ordinary exception-handling clause caught: {0}", 
                ex.GetType());
        }        
        finally
        {
            var1 = 3033;
            var2 = "Another string.";
        }
    }
}

// This code example produces output similar to the following:
//
//Method: Void MethodBodyExample(System.Object)
//    Local variables are initialized: True
//    Maximum number of items on the operand stack: 2
    End Sub

    ' This test method is executed at the beginning of Main, to show
    ' how the Filter clause works. The Filter clause is generated by 
    ' a Visual Basic When expression. If arg is Nothing, this method
    ' throws ArgumentNullException, which is caught by the filter
    ' clause. If arg is a string, the method throws ArgumentException,
    ' which does not match the filter clause.
    '
    ' Sub Main also contains code to analyze this method, using 
    ' the properties and methods of the MethodBody class.
    Public Sub MethodBodyExample(ByVal arg As Object)

        ' Define some local variables. In addition to these variables,
        ' the local variable list includes the variables scoped to 
        ' the catch clauses.
        Dim var1 As Integer = 42
        Dim var2 As String = "Forty-two"

        Try
            ' Depending on the input value, throw an ArgumentException or 
            ' an ArgumentNullException to test the Catch clauses.
            '
            If arg Is Nothing Then
                Throw New ArgumentNullException("The argument cannot be Nothing.")
            End If
            If arg.GetType() Is GetType(String) Then
                Throw New ArgumentException("The argument cannot be a string.")
            End If
        
        ' The When expression makes this a filter clause. The expression 
        ' selects only exceptions that derive from the ArgumentException
        ' class. Other exceptions, including ArgumentException itself, 
        ' are not handled by this filter clause.
        Catch ex As ArgumentException _
            When ex.GetType().IsSubclassOf(GetType(ArgumentException))

            Console.WriteLine("Filter clause caught: {0}", ex.GetType())
        
        ' This catch clause handles the ArgumentException class, and
        ' any other class derived from Exception.
        Catch ex As Exception
            Console.WriteLine("Ordinary exception-handling clause caught: {0}", _
                ex.GetType())

        Finally
            var1 = 3033
            var2 = "Another string."
        End Try
    End Sub
End Class

' This code example produces output similar to the following:
'
'Ordinary exception-handling clause caught: System.ArgumentException
'Filter clause caught: System.ArgumentNullException
'
'Method: Void MethodBodyExample(System.Object)
'    Local variables are initialized: True
'    Maximum number of items on the operand stack: 3
//Clause
//    Type of exception: System.ArgumentException
//       Handler Length: 29
//       Handler Offset: 78
//     Try Block Length: 65
//     Try Block Offset: 13
//Finally
//       Handler Length: 13
//       Handler Offset: 113
//     Try Block Length: 100
//     Try Block Offset: 13
//
//Clause
//    Type of exception: System.Exception
//       Handler Length: 21
//       Handler Offset: 70
//     Try Block Length: 61
//     Try Block Offset: 9
//Finally
//       Handler Length: 14
//       Handler Offset: 94
//     Try Block Length: 85
//     Try Block Offset: 9
'
'Filter
'        Filter Offset: 0
'       Handler Length: 19
'       Handler Offset: 99
'     Try Block Length: 45
'     Try Block Offset: 9
'Clause
'    Type of exception: System.Exception
'       Handler Length: 25
'       Handler Offset: 118
'     Try Block Length: 45
'     Try Block Offset: 9
'Finally
'       Handler Length: 13
'       Handler Offset: 153
'     Try Block Length: 144
'     Try Block Offset: 9

Комментарии

Чтобы изучить предложения обработки исключений в методе, получите MethodInfo объект и GetMethodBody вызовите метод для получения тела метода.To examine the exception-handling clauses in a method, obtain a MethodInfo object and call the GetMethodBody method to obtain the method body. Чтобы получитьExceptionHandlingClause список объектов, используйте свойство.ExceptionHandlingClausesUse the ExceptionHandlingClauses property to obtain a list of ExceptionHandlingClause objects.

Примечание

Работа с предложениями обработки исключений требует глубокого понимания метаданных и форматов инструкций языка MSIL.Working with exception-handling clauses requires a thorough understanding of metadata and Microsoft intermediate language (MSIL) instruction formats. Сведения можно найти в документации по Common Language Infrastructure (CLI), особенно в разделе "Partition II: Определение метаданных и семантика" и "Раздел III. Набор инструкций CIL".Information can be found in the Common Language Infrastructure (CLI) documentation, especially "Partition II: Metadata Definition and Semantics" and "Partition III: CIL Instruction Set". Документация доступна в Интернете; см. страницы ECMAC# и стандарты Common Language Infrastructure на сайте MSDN и Стандарт ECMA-335 — общеязыковая инфраструктура (CLI) на международном веб-сайте организации ECMA.The documentation is available online; see ECMA C# and Common Language Infrastructure Standards on MSDN and Standard ECMA-335 - Common Language Infrastructure (CLI) on the Ecma International Web site.

Применяется к

Дополнительно