ParameterInfo.IsIn Свойство

Определение

Получает значение, указывающее, является ли этот параметр входным.Gets a value indicating whether this is an input parameter.

public:
 property bool IsIn { bool get(); };
public bool IsIn { get; }
member this.IsIn : bool
Public ReadOnly Property IsIn As Boolean

Значение свойства

Значение true, если параметр является входным; в противном случае — значение false.true if the parameter is an input parameter; otherwise, false.

Примеры

В следующем примере показано, как проверить параметры метода для атрибутов ParameterAttributes.In, ParameterAttributes.Outи ParameterAttributes.Optional.The following example shows how to test method parameters for the ParameterAttributes.In, ParameterAttributes.Out, and ParameterAttributes.Optional attributes.

Пример содержит метод DefineMethod, который выполняет следующие действия:The example contains a DefineMethod method that does the following:

После выполнения DefineMethodв примере выполняется поиск сборок, загруженных в настоящий момент, до тех пор, пока не будет найдена динамическая сборка.After executing DefineMethod, the example searches the assemblies that are currently loaded until it finds the dynamic assembly. Он загружает MyType из сборки, получает объект MethodInfo для метода MyMethod и проверяет параметры.It loads MyType from the assembly, gets a MethodInfo object for the MyMethod method, and examines the parameters. В примере используются свойства IsIn, IsOutи IsOptional для вывода сведений о параметрах.The example uses the IsIn, IsOut, and IsOptional properties to display information about the parameters.

using namespace System;
using namespace System::Reflection;
using namespace System::Threading;
using namespace System::Reflection::Emit;
void DefineMethod()
{
   AssemblyName^ myAssemblyName = gcnew AssemblyName;
   myAssemblyName->Name = "MyAssembly";

   // Get the assembly builder from the application domain associated with the current thread.
   AssemblyBuilder^ myAssemblyBuilder = Thread::GetDomain()->DefineDynamicAssembly( myAssemblyName, AssemblyBuilderAccess::RunAndSave );

   // Create a dynamic module in the assembly.
   ModuleBuilder^ myModuleBuilder = myAssemblyBuilder->DefineDynamicModule( "MyModule", "MyAssembly.dll" );

   // Create a type in the module.
   TypeBuilder^ myTypeBuilder = myModuleBuilder->DefineType( "MyType" );

   // Create a method called MyMethod.
   array<Type^>^type1 = {int::typeid,short::typeid,long::typeid};
   MethodBuilder^ myMethodBuilder = myTypeBuilder->DefineMethod( "MyMethod", static_cast<MethodAttributes>(MethodAttributes::Public | MethodAttributes::HideBySig | MethodAttributes::Static), String::typeid, type1 );

   // Set the attributes for the parameters of the method.
   // Set the attribute for the first parameter to IN.
   ParameterBuilder^ myParameterBuilder = myMethodBuilder->DefineParameter( 1, ParameterAttributes::In, "MyIntParameter" );

   // Set the attribute for the second parameter to OUT.
   myParameterBuilder = myMethodBuilder->DefineParameter( 2, ParameterAttributes::Out, "MyShortParameter" );

   // Set the attribute for the third parameter to OPTIONAL.
   myParameterBuilder = myMethodBuilder->DefineParameter( 3, static_cast<ParameterAttributes>(ParameterAttributes::Optional | ParameterAttributes::HasDefault), "MyLongParameter" );

   // Get the Microsoft Intermediate Language generator for the method.
   ILGenerator^ myILGenerator = myMethodBuilder->GetILGenerator();

   // Use the utility method to generate the MSIL instructions that print a String* to the console.
   myILGenerator->EmitWriteLine( "Hello World!" );

   // Generate the S"ret" MSIL instruction.
   myILGenerator->Emit( OpCodes::Ret );

   // End the creation of the type.
   myTypeBuilder->CreateType();
}

int main()
{
   // Create a dynamic assembly with a type named MyType.
   DefineMethod();

   // Get the assemblies currently loaded in the application domain.
   array<Assembly^>^myAssemblies = Thread::GetDomain()->GetAssemblies();
   Assembly^ myAssembly = nullptr;

   // Get the assembly named MyAssembly.
   for ( int i = 0; i < myAssemblies->Length; i++ )
      if ( String::Compare( myAssemblies[ i ]->GetName( false )->Name, "MyAssembly" ) == 0 )
            myAssembly = myAssemblies[ i ];

   if ( myAssembly != nullptr )
   {
      // Get a type named MyType.
      Type^ myType = myAssembly->GetType( "MyType" );

      // Get a method named MyMethod from the type.
      MethodBase^ myMethodBase = myType->GetMethod( "MyMethod" );

      // Get the parameters associated with the method.
      array<ParameterInfo^>^myParameters = myMethodBase->GetParameters();
      Console::WriteLine( "\nThe method {0} has the {1} parameters :", myMethodBase, myParameters->Length );

      // Print the IN, OUT and OPTIONAL attributes associated with each of the parameters.
      for ( int i = 0; i < myParameters->Length; i++ )
      {
         if ( myParameters[ i ]->IsIn )
                  Console::WriteLine( "\tThe {0} parameter has the In attribute", i + 1 );
         if ( myParameters[ i ]->IsOptional )
                  Console::WriteLine( "\tThe {0} parameter has the Optional attribute", i + 1 );
         if ( myParameters[ i ]->IsOut )
                  Console::WriteLine( "\tThe {0} parameter has the Out attribute", i + 1 );
      }
   }
   else
      Console::WriteLine( "Could not find a assembly named 'MyAssembly' for the current application domain" );
}

using System;
using System.Reflection;
using System.Threading;
using System.Reflection.Emit;

public class ParameterInfo_IsIn_IsOut_IsOptional
{
   public static void DefineMethod()
   {
      AssemblyName myAssemblyName = new AssemblyName();
      myAssemblyName.Name = "MyAssembly";
      // Get the assembly builder from the application domain associated with the current thread.
      AssemblyBuilder myAssemblyBuilder = Thread.GetDomain().DefineDynamicAssembly(myAssemblyName, AssemblyBuilderAccess.RunAndSave);
      // Create a dynamic module in the assembly.
      ModuleBuilder myModuleBuilder = myAssemblyBuilder.DefineDynamicModule("MyModule", "MyAssembly.dll");
      // Create a type in the module.
      TypeBuilder myTypeBuilder = myModuleBuilder.DefineType("MyType");
      // Create a method called MyMethod.
      MethodBuilder myMethodBuilder = myTypeBuilder.DefineMethod("MyMethod",MethodAttributes.Public | MethodAttributes.HideBySig |
                                                                           MethodAttributes.Static, typeof(string), new Type[] {typeof(int), typeof(short), typeof(long)});
      // Set the attributes for the parameters of the method.
      // Set the attribute for the first parameter to IN.
      ParameterBuilder myParameterBuilder = myMethodBuilder.DefineParameter(1, ParameterAttributes.In, "MyIntParameter");
      // Set the attribute for the second parameter to OUT.
      myParameterBuilder = myMethodBuilder.DefineParameter(2, ParameterAttributes.Out, "MyShortParameter");
      // Set the attribute for the third parameter to OPTIONAL.
      myParameterBuilder = myMethodBuilder.DefineParameter(3, ParameterAttributes.Optional | ParameterAttributes.HasDefault, "MyLongParameter");
      // Get the Microsoft Intermediate Language generator for the method.
      ILGenerator myILGenerator = myMethodBuilder.GetILGenerator();
      // Use the utility method to generate the MSIL instructions that print a string to the console.
      myILGenerator.EmitWriteLine("Hello World!");
      // Generate the "ret" MSIL instruction.
      myILGenerator.Emit(OpCodes.Ret);
      // End the creation of the type.
      myTypeBuilder.CreateType();
   }

   public static void Main()
   {
      // Create a dynamic assembly with a type named MyType.
      DefineMethod();

      // Get the assemblies currently loaded in the application domain.
      Assembly[] myAssemblies = Thread.GetDomain().GetAssemblies();
      Assembly myAssembly = null;
      // Get the assembly named MyAssembly.
      for(int i = 0; i < myAssemblies.Length; i++)
         if(String.Compare(myAssemblies[i].GetName(false).Name, "MyAssembly") == 0)
            myAssembly = myAssemblies[i];

      if(myAssembly != null)
      {
         // Get a type named MyType.
         Type myType = myAssembly.GetType("MyType");
         // Get a method named MyMethod from the type.
         MethodBase myMethodBase = myType.GetMethod("MyMethod");
         // Get the parameters associated with the method.
         ParameterInfo[] myParameters = myMethodBase.GetParameters();
         Console.WriteLine("\nThe method {0} has the {1} parameters :", 
            myMethodBase, myParameters.Length);
         // Print the IN, OUT and OPTIONAL attributes associated with each of the parameters.
         for(int i = 0; i < myParameters.Length; i++)
         {
            if(myParameters[i].IsIn)
               Console.WriteLine("\tThe {0} parameter has the In attribute", 
                                       i + 1);
            if(myParameters[i].IsOptional)
               Console.WriteLine("\tThe {0} parameter has the Optional attribute",
                                       i + 1);
            if(myParameters[i].IsOut)
               Console.WriteLine("\tThe {0} parameter has the Out attribute",
                                       i + 1);
         }
      }
      else
        {
            Console.WriteLine("Could not find a assembly named 'MyAssembly' for the current application domain");
        }
    }
}
Imports System.Reflection
Imports System.Threading
Imports System.Reflection.Emit

Public Class ParameterInfo_IsIn_IsOut_IsOptional
   
   Public Shared Sub DefineMethod()
      Dim myAssemblyName As New AssemblyName()
      myAssemblyName.Name = "MyAssembly"
      ' Get the assesmbly builder from the application domain associated with the current thread.
      Dim myAssemblyBuilder As AssemblyBuilder = Thread.GetDomain().DefineDynamicAssembly(myAssemblyName, AssemblyBuilderAccess.RunAndSave)
      ' Create a dynamic module in the assembly.
      Dim myModuleBuilder As ModuleBuilder = myAssemblyBuilder.DefineDynamicModule("MyModule", "MyAssembly.dll")
      ' Create a type in the module.
      Dim myTypeBuilder As TypeBuilder = myModuleBuilder.DefineType("MyType")
      ' Create a method called MyMethod.
      Dim myMethodBuilder As MethodBuilder = myTypeBuilder.DefineMethod("MyMethod", MethodAttributes.Public Or MethodAttributes.HideBySig Or MethodAttributes.Static, GetType(String), New Type() {GetType(Integer), GetType(Short), GetType(Long)})
      ' Set the attributes for the parameters of the method.
      ' Set the attribute for the first parameter to IN.
      Dim myParameterBuilder As ParameterBuilder = myMethodBuilder.DefineParameter(1, ParameterAttributes.In, "MyIntParameter")
      ' Set the attribute for the second parameter to OUT.
      myParameterBuilder = myMethodBuilder.DefineParameter(2, ParameterAttributes.Out, "MyShortParameter")
      ' Set the attribute for the third parameter to OPTIONAL.
      myParameterBuilder = myMethodBuilder.DefineParameter(3, ParameterAttributes.Optional Or ParameterAttributes.HasDefault, "MyLongParameter")
      ' Get the Microsoft Intermediate Language generator for the method.
      Dim myILGenerator As ILGenerator = myMethodBuilder.GetILGenerator()
      ' Use the utility method to generate the MSIL instructions that print a string to the console.
      myILGenerator.EmitWriteLine("Hello World!")
      ' Generate the "ret" MSIL instruction.
      myILGenerator.Emit(OpCodes.Ret)
      ' End the creation of the type.
      myTypeBuilder.CreateType()
   End Sub
   
   
   Public Shared Sub Main()
      ' Create a dynamic assembly with a type named 'MyType'.
      DefineMethod()
      
      ' Get the assemblies currently loaded in the application domain.
      Dim myAssemblies As [Assembly]() = Thread.GetDomain().GetAssemblies()
      Dim myAssembly As [Assembly] = Nothing
      ' Get the assembly named MyAssembly.
      Dim i As Integer
      For i = 0 To myAssemblies.Length - 1
         If [String].Compare(myAssemblies(i).GetName(False).Name, "MyAssembly") = 0 Then
            myAssembly = myAssemblies(i)
         End If 
      Next i
      If Not (myAssembly Is Nothing) Then
         ' Get a type named MyType.
         Dim myType As Type = myAssembly.GetType("MyType")
         ' Get a method named MyMethod from the type.
         Dim myMethodBase As MethodBase = myType.GetMethod("MyMethod")
         ' Get the parameters associated with the method.
         Dim myParameters As ParameterInfo() = myMethodBase.GetParameters()
         Console.WriteLine(ControlChars.Cr + "The method {0} has the {1} parameters :", myMethodBase, myParameters.Length)
         ' Print the IN, OUT and OPTIONAL attributes associated with each of the parameters.
         For i = 0 To myParameters.Length - 1
            If myParameters(i).IsIn Then
               Console.WriteLine(ControlChars.Tab + "The {0} parameter has the In attribute", i + 1)
            End If
            If myParameters(i).IsOptional Then
               Console.WriteLine(ControlChars.Tab + "The {0} parameter has the Optional attribute", i + 1)
            End If
            If myParameters(i).IsOut Then
               Console.WriteLine(ControlChars.Tab + "The {0} parameter has the Out attribute", i + 1)
            End If
         Next i
      Else
         Console.WriteLine("Could not find a assembly named 'MyAssembly' for the current application domain")
      End If
   End Sub
End Class

Комментарии

Этот метод зависит от необязательного флага метаданных.This method depends on an optional metadata flag. Этот флаг может быть вставлен компиляторами, но компилятор не обязан делать это.This flag can be inserted by compilers, but the compilers are not obligated to do so.

Этот метод использует флаг In перечислителя ParameterAttributes.This method utilizes the In flag of the ParameterAttributes enumerator.

Чтобы получить массив ParameterInfo, сначала нужно получить метод или конструктор, а затем вызвать MethodBase.GetParameters.To get the ParameterInfo array, first get the method or the constructor and then call MethodBase.GetParameters.

Применяется к