UpDownBase.BorderStyle Свойство

Определение

Возвращает или задает стиль границы для регулятора (также известного как элемент управления "вверх-вниз").Gets or sets the border style for the spin box (also known as an up-down control).

public:
 property System::Windows::Forms::BorderStyle BorderStyle { System::Windows::Forms::BorderStyle get(); void set(System::Windows::Forms::BorderStyle value); };
public System.Windows.Forms.BorderStyle BorderStyle { get; set; }
member this.BorderStyle : System.Windows.Forms.BorderStyle with get, set
Public Property BorderStyle As BorderStyle

Значение свойства

BorderStyle

Одно из значений перечисления BorderStyle.One of the BorderStyle values. Значение по умолчанию — Fixed3D.The default value is Fixed3D.

Исключения

Назначенное значение не является одном из значений BorderStyle.The value assigned is not one of the BorderStyle values.

Примеры

В следующем примере кода используется производный класс NumericUpDown и устанавливаются некоторые его свойства, производные от UpDownBase .The following code example uses the derived class NumericUpDown and sets some of its properties derived from UpDownBase. Этот код требует наличия NumericUpDown элемента управления с именем numericUpDown1 , двух ComboBox элементов управления с именами comboBox1 и и comboBox2 трех CheckBox элементов управления с именами, и, checkBox1 checkBox2 checkBox2 созданных в форме.This code requires that you have a NumericUpDown control named numericUpDown1, two ComboBox controls named comboBox1 and comboBox2, and three CheckBox controls named checkBox1, checkBox2, and checkBox2 created on a form. Добавьте следующие элементы в comboBox1 : None , Fixed3D и FixedSingle .Add the following items to comboBox1: None, Fixed3D, and FixedSingle. Добавьте следующие элементы в comboBox2 : Left , Right и Center .Add the following items to comboBox2: Left, Right, and Center.

Код позволяет изменять значения свойств во время выполнения и видеть, как каждый из них влияет на внешний вид и поведение регулятора.The code allows you to change the property values at run time and see how each affects the appearance and behavior of the spin box.

void comboBox1_SelectedIndexChanged( Object^ sender, EventArgs^ e )
{
   // Set the BorderStyle property.
   if (  !String::Compare( comboBox1->Text, "Fixed3D" ) )
   {
      numericUpDown1->BorderStyle = System::Windows::Forms::BorderStyle::Fixed3D;
   }
   else
   if (  !String::Compare( comboBox1->Text, "None" ) )
   {
      numericUpDown1->BorderStyle = System::Windows::Forms::BorderStyle::None;
   }
   else
   if (  !String::Compare( comboBox1->Text, "FixedSingle" ) )
   {
      numericUpDown1->BorderStyle = System::Windows::Forms::BorderStyle::FixedSingle;
   }
}

void comboBox2_SelectedIndexChanged( Object^ sender, EventArgs^ e )
{
   // Set the TextAlign property.    
   if (  !String::Compare( comboBox2->Text, "Right" ) )
   {
      numericUpDown1->TextAlign = HorizontalAlignment::Right;
   }
   else
   if (  !String::Compare( comboBox1->Text, "Left" ) )
   {
      numericUpDown1->TextAlign = HorizontalAlignment::Left;
   }
   else
   if (  !String::Compare( comboBox1->Text, "Center" ) )
   {
      numericUpDown1->TextAlign = HorizontalAlignment::Center;
   }
}

void checkBox1_Click( Object^ sender, EventArgs^ e )
{
   // Evaluate and toggle the ReadOnly property.
   if ( numericUpDown1->ReadOnly )
   {
      numericUpDown1->ReadOnly = false;
   }
   else
   {
      numericUpDown1->ReadOnly = true;
   }
}

void checkBox2_Click( Object^ sender, EventArgs^ e )
{
   // Evaluate and toggle the InterceptArrowKeys property.
   if ( numericUpDown1->InterceptArrowKeys )
   {
      numericUpDown1->InterceptArrowKeys = false;
   }
   else
   {
      numericUpDown1->InterceptArrowKeys = true;
   }
}

void checkBox3_Click( Object^ sender, EventArgs^ e )
{
   // Evaluate and toggle the UpDownAlign property.
   if ( numericUpDown1->UpDownAlign == LeftRightAlignment::Left )
   {
      numericUpDown1->UpDownAlign = LeftRightAlignment::Right;
   }
   else
   {
      numericUpDown1->UpDownAlign = LeftRightAlignment::Left;
   }
}
private void comboBox1_SelectedIndexChanged(Object sender, 
                                             EventArgs e)
 {
      // Set the BorderStyle property.
     switch(comboBox1.Text)
     {
         case "Fixed3D":
             numericUpDown1.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D;
             break;
         case "None":
             numericUpDown1.BorderStyle = System.Windows.Forms.BorderStyle.None;
             break;
         case "FixedSingle":
             numericUpDown1.BorderStyle = System.Windows.Forms.BorderStyle.FixedSingle;
             break;
     }
 }
 
 private void comboBox2_SelectedIndexChanged(Object sender, 
                                             EventArgs e)
 {
      // Set the TextAlign property.    
     switch (comboBox2.Text)
     {
         case "Right":
             numericUpDown1.TextAlign = HorizontalAlignment.Right;
             break;
         case "Left":
             numericUpDown1.TextAlign = HorizontalAlignment.Left;
             break;
         case "Center":
             numericUpDown1.TextAlign = HorizontalAlignment.Center;
             break;
     }
 }
 
 private void checkBox1_Click(Object sender, 
                              EventArgs e)
 {
      // Evaluate and toggle the ReadOnly property.
     if (numericUpDown1.ReadOnly)
     {
         numericUpDown1.ReadOnly = false;
     }
     else
     {
         numericUpDown1.ReadOnly = true;
     }
 }
 
 private void checkBox2_Click(Object sender, 
                              EventArgs e)
 {
      // Evaluate and toggle the InterceptArrowKeys property.
     if (numericUpDown1.InterceptArrowKeys)
     {  
         numericUpDown1.InterceptArrowKeys = false;
     }
     else
     {
         numericUpDown1.InterceptArrowKeys = true;
     }
 }
 
 private void checkBox3_Click(Object sender, 
                              EventArgs e)
 {
      // Evaluate and toggle the UpDownAlign property.
     if (numericUpDown1.UpDownAlign == LeftRightAlignment.Left)
     {
         numericUpDown1.UpDownAlign = LeftRightAlignment.Right;
     }
     else
     {
         numericUpDown1.UpDownAlign = LeftRightAlignment.Left;
     }
 }
 
Private Sub comboBox1_SelectedIndexChanged(sender As Object, e As EventArgs)
    ' Set the BorderStyle property.
    Select Case comboBox1.Text
        Case "Fixed3D"
            numericUpDown1.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D
        Case "None"
            numericUpDown1.BorderStyle = System.Windows.Forms.BorderStyle.None
        Case "FixedSingle"
            numericUpDown1.BorderStyle = System.Windows.Forms.BorderStyle.FixedSingle
    End Select
End Sub    

Private Sub comboBox2_SelectedIndexChanged(sender As Object, e As EventArgs)
    ' Set the TextAlign property.    
    Select Case comboBox2.Text
        Case "Right"
            numericUpDown1.TextAlign = HorizontalAlignment.Right
        Case "Left"
            numericUpDown1.TextAlign = HorizontalAlignment.Left
        Case "Center"
            numericUpDown1.TextAlign = HorizontalAlignment.Center
    End Select
End Sub    

Private Sub checkBox1_Click(sender As Object, e As EventArgs)
    ' Evaluate and toggle the ReadOnly property.
    If numericUpDown1.ReadOnly Then
        numericUpDown1.ReadOnly = False
    Else
        numericUpDown1.ReadOnly = True
    End If
End Sub    

Private Sub checkBox2_Click(sender As Object, e As EventArgs)
    ' Evaluate and toggle the InterceptArrowKeys property.
    If numericUpDown1.InterceptArrowKeys Then
        numericUpDown1.InterceptArrowKeys = False
    Else
        numericUpDown1.InterceptArrowKeys = True
    End If
End Sub    

Private Sub checkBox3_Click(sender As Object, e As EventArgs)
    ' Evaluate and toggle the UpDownAlign property.
    If numericUpDown1.UpDownAlign = LeftRightAlignment.Left Then
        numericUpDown1.UpDownAlign = LeftRightAlignment.Right
    Else
        numericUpDown1.UpDownAlign = LeftRightAlignment.Left
    End If
End Sub

Комментарии

Свойство можно использовать BorderStyle для создания без границ и плоских элементов управления в дополнение к трехмерному элементу управления по умолчанию.You can use the BorderStyle property to create borderless and flat controls in addition to the default three-dimensional control.

Применяется к

См. также раздел