UpDownBase.UpDownAlign UpDownBase.UpDownAlign UpDownBase.UpDownAlign UpDownBase.UpDownAlign Property

Определение

Получает или задает выравнивание кнопок "СТРЕЛКА ВВЕРХ" и "СТРЕЛКА ВНИЗ" на регуляторе (также известном как элемент управления "вверх-вниз").Gets or sets the alignment of the up and down buttons on the spin box (also known as an up-down control).

public:
 property System::Windows::Forms::LeftRightAlignment UpDownAlign { System::Windows::Forms::LeftRightAlignment get(); void set(System::Windows::Forms::LeftRightAlignment value); };
public System.Windows.Forms.LeftRightAlignment UpDownAlign { get; set; }
member this.UpDownAlign : System.Windows.Forms.LeftRightAlignment with get, set
Public Property UpDownAlign As LeftRightAlignment

Значение свойства

Одно из значений LeftRightAlignment.One of the LeftRightAlignment values. Значение по умолчанию — Right.The default value is Right.

Исключения

Назначенное значение не является одном из значений LeftRightAlignment.The value assigned is not one of the LeftRightAlignment values.

Примеры

В следующем примере кода используется производный класс NumericUpDown и устанавливаются некоторые его свойства, производные от. UpDownBaseThe following code example uses the derived class NumericUpDown and sets some of its properties derived from UpDownBase. Этот NumericUpDown код требует наличия элемента управления с numericUpDown1именем, двух ComboBox элементов управления с comboBox1 именами comboBox2и и трех CheckBox элементов управления checkBox1с checkBox2именами, checkBox2 и. создается в форме.This code requires that you have a NumericUpDown control named numericUpDown1, two ComboBox controls named comboBox1 and comboBox2, and three CheckBox controls named checkBox1, checkBox2, and checkBox2 created on a form. Добавьте следующие элементы comboBox1в: None, Fixed3Dи FixedSingle.Add the following items to comboBox1: None, Fixed3D, and FixedSingle. Добавьте следующие элементы comboBox2в: Left, Rightи Center.Add the following items to comboBox2: Left, Right, and Center.

Код позволяет изменять значения свойств во время выполнения и видеть, как каждый из них влияет на внешний вид и поведение регулятора.The code allows you to change the property values at run time and see how each affects the appearance and behavior of the spin box.

void comboBox1_SelectedIndexChanged( Object^ sender, EventArgs^ e )
{
   // Set the BorderStyle property.
   if (  !String::Compare( comboBox1->Text, "Fixed3D" ) )
   {
      numericUpDown1->BorderStyle = System::Windows::Forms::BorderStyle::Fixed3D;
   }
   else
   if (  !String::Compare( comboBox1->Text, "None" ) )
   {
      numericUpDown1->BorderStyle = System::Windows::Forms::BorderStyle::None;
   }
   else
   if (  !String::Compare( comboBox1->Text, "FixedSingle" ) )
   {
      numericUpDown1->BorderStyle = System::Windows::Forms::BorderStyle::FixedSingle;
   }
}

void comboBox2_SelectedIndexChanged( Object^ sender, EventArgs^ e )
{
   // Set the TextAlign property.    
   if (  !String::Compare( comboBox2->Text, "Right" ) )
   {
      numericUpDown1->TextAlign = HorizontalAlignment::Right;
   }
   else
   if (  !String::Compare( comboBox1->Text, "Left" ) )
   {
      numericUpDown1->TextAlign = HorizontalAlignment::Left;
   }
   else
   if (  !String::Compare( comboBox1->Text, "Center" ) )
   {
      numericUpDown1->TextAlign = HorizontalAlignment::Center;
   }
}

void checkBox1_Click( Object^ sender, EventArgs^ e )
{
   // Evaluate and toggle the ReadOnly property.
   if ( numericUpDown1->ReadOnly )
   {
      numericUpDown1->ReadOnly = false;
   }
   else
   {
      numericUpDown1->ReadOnly = true;
   }
}

void checkBox2_Click( Object^ sender, EventArgs^ e )
{
   // Evaluate and toggle the InterceptArrowKeys property.
   if ( numericUpDown1->InterceptArrowKeys )
   {
      numericUpDown1->InterceptArrowKeys = false;
   }
   else
   {
      numericUpDown1->InterceptArrowKeys = true;
   }
}

void checkBox3_Click( Object^ sender, EventArgs^ e )
{
   // Evaluate and toggle the UpDownAlign property.
   if ( numericUpDown1->UpDownAlign == LeftRightAlignment::Left )
   {
      numericUpDown1->UpDownAlign = LeftRightAlignment::Right;
   }
   else
   {
      numericUpDown1->UpDownAlign = LeftRightAlignment::Left;
   }
}
private void comboBox1_SelectedIndexChanged(Object sender, 
                                             EventArgs e)
 {
      // Set the BorderStyle property.
     switch(comboBox1.Text)
     {
         case "Fixed3D":
             numericUpDown1.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D;
             break;
         case "None":
             numericUpDown1.BorderStyle = System.Windows.Forms.BorderStyle.None;
             break;
         case "FixedSingle":
             numericUpDown1.BorderStyle = System.Windows.Forms.BorderStyle.FixedSingle;
             break;
     }
 }
 
 private void comboBox2_SelectedIndexChanged(Object sender, 
                                             EventArgs e)
 {
      // Set the TextAlign property.    
     switch (comboBox2.Text)
     {
         case "Right":
             numericUpDown1.TextAlign = HorizontalAlignment.Right;
             break;
         case "Left":
             numericUpDown1.TextAlign = HorizontalAlignment.Left;
             break;
         case "Center":
             numericUpDown1.TextAlign = HorizontalAlignment.Center;
             break;
     }
 }
 
 private void checkBox1_Click(Object sender, 
                              EventArgs e)
 {
      // Evaluate and toggle the ReadOnly property.
     if (numericUpDown1.ReadOnly)
     {
         numericUpDown1.ReadOnly = false;
     }
     else
     {
         numericUpDown1.ReadOnly = true;
     }
 }
 
 private void checkBox2_Click(Object sender, 
                              EventArgs e)
 {
      // Evaluate and toggle the InterceptArrowKeys property.
     if (numericUpDown1.InterceptArrowKeys)
     {  
         numericUpDown1.InterceptArrowKeys = false;
     }
     else
     {
         numericUpDown1.InterceptArrowKeys = true;
     }
 }
 
 private void checkBox3_Click(Object sender, 
                              EventArgs e)
 {
      // Evaluate and toggle the UpDownAlign property.
     if (numericUpDown1.UpDownAlign == LeftRightAlignment.Left)
     {
         numericUpDown1.UpDownAlign = LeftRightAlignment.Right;
     }
     else
     {
         numericUpDown1.UpDownAlign = LeftRightAlignment.Left;
     }
 }
 
Private Sub comboBox1_SelectedIndexChanged(sender As Object, e As EventArgs)
    ' Set the BorderStyle property.
    Select Case comboBox1.Text
        Case "Fixed3D"
            numericUpDown1.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D
        Case "None"
            numericUpDown1.BorderStyle = System.Windows.Forms.BorderStyle.None
        Case "FixedSingle"
            numericUpDown1.BorderStyle = System.Windows.Forms.BorderStyle.FixedSingle
    End Select
End Sub    

Private Sub comboBox2_SelectedIndexChanged(sender As Object, e As EventArgs)
    ' Set the TextAlign property.    
    Select Case comboBox2.Text
        Case "Right"
            numericUpDown1.TextAlign = HorizontalAlignment.Right
        Case "Left"
            numericUpDown1.TextAlign = HorizontalAlignment.Left
        Case "Center"
            numericUpDown1.TextAlign = HorizontalAlignment.Center
    End Select
End Sub    

Private Sub checkBox1_Click(sender As Object, e As EventArgs)
    ' Evaluate and toggle the ReadOnly property.
    If numericUpDown1.ReadOnly Then
        numericUpDown1.ReadOnly = False
    Else
        numericUpDown1.ReadOnly = True
    End If
End Sub    

Private Sub checkBox2_Click(sender As Object, e As EventArgs)
    ' Evaluate and toggle the InterceptArrowKeys property.
    If numericUpDown1.InterceptArrowKeys Then
        numericUpDown1.InterceptArrowKeys = False
    Else
        numericUpDown1.InterceptArrowKeys = True
    End If
End Sub    

Private Sub checkBox3_Click(sender As Object, e As EventArgs)
    ' Evaluate and toggle the UpDownAlign property.
    If numericUpDown1.UpDownAlign = LeftRightAlignment.Left Then
        numericUpDown1.UpDownAlign = LeftRightAlignment.Right
    Else
        numericUpDown1.UpDownAlign = LeftRightAlignment.Left
    End If
End Sub

Применяется к

Дополнительно