Windows üzerinde AzCopy kullanarak blobları depolama hesapları arasında geçirme

Makale
02/01/2018

Bu örnek kullanıcı tarafından sağlanan bir kaynak depolama hesabından tüm blob nesnelerini kullanıcı tarafından sağlanan bir hedef depolama hesabına geçirir.

Bu bir depolama hesabındaki tüm kapsayıcıları listeleyen Get-AzStorageContainer komutu kullanılarak gerçekleştirilir. Örnek daha sonra AzCopy komutları vererek kaynak depolama hesabından her bir kapsayıcıyı hedef depolama hesabına taşır. Herhangi bir hata oluşursa, örnek $retryTimes kez yeniden dener (varsayılan değer 3’tür ve -RetryTimes parametresiyle değiştirilebilir). Her yeniden denemede hatayla karşılaşılırsa, kullanıcı -LastSuccessContainerName parametresini kullanarak örneğe başarılı bir şekilde kopyalanan son kapsayıcıyı sağlayarak betiği yeniden çalıştırabilir. Örnek daha sonra bu noktadan kapsayıcıları kopyalamaya devam eder.

Bu örnek, Azure PowerShell Depolama modülünün 0.7 veya sonraki bir sürümünü gerektirir. Get-Module -ListAvailable Az.storage kullanarak yüklü olan sürümü denetleyebilirsiniz. Yüklemeniz veya yükseltmeniz gerekirse, bkz. Azure PowerShell Modülü yükleme.

Azure aboneliğiniz yoksa başlamadan önce ücretsiz bir hesap oluşturun.

Bu örnek ayrıca en son Windows üzerinde AzCopy sürümünü gerektirir. Varsayılan yükleme dizini: C:\Program Files (x86)\Microsoft SDKs\Azure\AzCopy\

Bu örnek bir kaynak depolama hesabının adı ve anahtarını, bir hedef depolama hesabının adı ve anahtarını ve AzCopy.exe dosyasının tam dosya yolunu (varsayılan dizinde yüklü değilse) alır.

Aşağıda bu örnek için giriş örnekleri verilmiştir:

AzCopy varsayılan dizinde yüklüyse:

srcStorageAccountName: ExampleSourceStorageAccountName
srcStorageAccountKey: ExampleSourceStorageAccountKey
DestStorageAccountName: ExampleTargetStorageAccountName
DestStorageAccountKey: ExampleTargetStorageAccountKey

AzCopy varsayılan dizinde yüklü değilse:

srcStorageAccountName: ExampleSourceStorageAccountName
srcStorageAccountKey: ExampleSourceStorageAccountKey
DestStorageAccountName: ExampleTargetStorageAccountName
DestStorageAccountKey: ExampleTargetStorageAccountKey
AzCopyPath: C:\Program Files (x86)\Microsoft SDKs\Azure\AzCopy\AzCopy.exe

Bir hatayla karşılaşılırsa ve örneğin belirli bir kapsayıcıdan yeniden çalıştırılması gerekirse:

.\copyScript.ps1 -LastSuccessContainerName myContainerName

Örnek betik

# Run the script in a new open Powershell window, which has not run other cmdlets, or AzCopy performance could suffer .
# Need install Azure PowerShell before runing the script: https://github.com/Azure/azure-powershell/releases
# Need install AzCopy before runing the script: https://docs.microsoft.com/Az.Storage/common/storage-use-azcopy
# Do not modify the Source or Destination accounts while the copy is running

param (
    [Parameter(Mandatory = $true, 
    HelpMessage= "Source Storage account name.")]
    [ValidatePattern("^[a-z0-9`]{3,24}$")]
    [String]$srcStorageAccountName,

    [Parameter(Mandatory = $true, 
    HelpMessage= "Source Storage account key.")]
    [String]$srcStorageAccountKey,

    [Parameter(Mandatory = $true, 
    HelpMessage= "Destination Storage account name.")]
    [ValidatePattern("^[a-z0-9`]{3,24}$")]
    [String]$DestStorageAccountName,

    [Parameter(Mandatory = $true, 
    HelpMessage= "Destination Storage account key.")]
    [String]$DestStorageAccountKey,

    [Parameter(Mandatory = $false, 
    HelpMessage= "Input the full filePath of the AzCopy.exe, e.g.: C:\Program Files (x86)\Microsoft SDKs\Azure\AzCopy\AzCopy.exe")]
    [String]$AzCopyPath = "C:\Program Files (x86)\Microsoft SDKs\Azure\AzCopy\AzCopy.exe",

    [Parameter(Mandatory = $false, 
    HelpMessage='Sets the number of retries in an event of failure. Set to 0 for no retry, set -1 for infinite retry.')]
    [Int32]$RetryTimes = 3,

    [Parameter(Mandatory = $false, 
    ValueFromPipeline = $true, 
    HelpMessage='Used for resume operation. When provided, the script will copy containers that are alphabetically after $LastSuccessContainerName')]
    [String]$LastSuccessContainerName = $nullz
 )

 if( (Get-Item $AzCopyPath).Exists)
 {

    $FileItemVersion = (Get-Item $AzCopyPath).VersionInfo
    $FilePath = ("{0}.{1}.{2}.{3}" -f  $FileItemVersion.FileMajorPart,  $FileItemVersion.FileMinorPart,  $FileItemVersion.FileBuildPart,  $FileItemVersion.FilePrivatePart)

    # only netcore version AzCopy.exe has version 0.0.0.0, and all netcore version AzCopy works in this script 
    if(([version] $FilePath -lt "7.0.0.2") -and ([version] $FilePath -ne "0.0.0.0"))
    {
        $AzCopyPath = Read-Host "Version of AzCopy found at default install directory is of a lower, unsupported version. Please input the full filePath of the AzCopy.exe that is version 7.0.0.2 or higher, e.g.: C:\Program Files (x86)\Microsoft SDKs\Azure\AzCopy\AzCopy.exe"
    }
 }
 elseIf( (Get-Item $AzCopyPath).Exists -eq $false)
 {
    $AzCopyPath = Read-Host "Input the full filePath of the AzCopy.exe, e.g.: C:\Program Files (x86)\Microsoft SDKs\Azure\AzCopy\AzCopy.exe"
 }

# Create and check Storage context
$Error.Clear()
$srcCtx = New-AzStorageContext -StorageAccountName $srcStorageAccountName -StorageAccountKey $srcStorageAccountKey
if ($srcCtx -eq $null)
{
    Write-Error "Script could not create source Storage Context, possibly due to invalid StorageAccountName or StorageAccount Key terminating: $Error[0]";
    return;
}
$destCtx = New-AzStorageContext -StorageAccountName $destStorageAccountName -StorageAccountKey $destStorageAccountKey
if ($destCtx -eq $null)
{
    Write-Error "Script could not create destination storage context, possibly due to invalid StorageAccountName or StorageAccount Key terminating: $Error[0]";
    return;
}

#Check Source and Destination Storage account Connection
$Error.Clear()
$Containers = Get-AzStorageContainer -MaxCount 1 -Context $srcCtx
if ($Error.Count -gt 0)
{
    Write-Error "Script failed to connect to source Storage account, terminating: $Error[0]";
    return;
}
$Containers = Get-AzStorageContainer -MaxCount 1 -Context $destCtx
if ($Error.Count -gt 0)
{
    Write-Error "Script failed to connect to destination Storage account, terminating: $Error[0]";
    return;
}

#Check AzCopy Path
if((Test-Path $AzCopyPath) -eq $false)
{
    Write-Error "Script is terminating since the provided AzCopyPath does not exist: $AzCopyPath ";
    return;
}
elseif((Get-Item $AzCopyPath).BaseName -ne "AzCopy" )
{
    Write-Error "Script is terminating since the provided AzCopyPath does not refer to the AzCopy exe: $AzCopyPath ";
    return;
}
elseif((Get-Item $AzCopyPath).BaseName -eq "AzCopy")
{
    $FileItemVersion = (Get-Item $AzCopyPath).VersionInfo
    $FilePath = ("{0}.{1}.{2}.{3}" -f  $FileItemVersion.FileMajorPart,  $FileItemVersion.FileMinorPart,  $FileItemVersion.FileBuildPart,  $FileItemVersion.FilePrivatePart)

    if([version] $FilePath -lt "7.0.0.2")
    {
        $AzCopyPath = Read-Host "Version of AzCopy found at provided path is of a lower, unsupported version. Please input the full filePath of the AzCopy.exe that is version 7.0.0.2 or higher, e.g.: C:\Program Files (x86)\Microsoft SDKs\Azure\AzCopy\AzCopy.exe"
    }
}

$OutputLastSuccessContainer = $LastSuccessContainerName;
$HasReachedLastSuccessContainer = $false;

if ($LastSuccessContainerName -eq $null -or $LastSuccessContainerName -eq "")
{
    $HasReachedLastSuccessContainer = $true;
}

# For list container
$MaxReturn = 250
$Token = $Null

do{
    # List source containers
    $retry = 1
    $Error.Clear()
    $srcContainers = Get-AzStorageContainer -MaxCount $MaxReturn -ContinuationToken $Token -Context $srcCtx

    # If list container fail, retry it
    while(($Error.Count -gt 0) -and ($RetryTimes -eq -1 -or $retry -le $retryTimes))
    {
        Write-Host "Retry List containers $retry"
        $Error.Clear()
        $srcContainers = Get-AzStorageContainer -MaxCount $MaxReturn -ContinuationToken $Token -Context $srcCtx
        $retry++
    }

    # If list container fail after retry, break script
    if ($Error.Count -gt 0){
        Write-Error "Terminating the script since listing source containers failed: $Error[0]";
        $CopyContainerFail = $true
        break;
    }
    $Token = $srcContainers[$srcContainers.Count -1].ContinuationToken;

    # Transfer containers one by one
    $CopyContainerFail = $false
    foreach ($container in $srcContainers)
    {
        if (!$HasReachedLastSuccessContainer)
        {
            if ($container.Name -eq $LastSuccessContainerName)
            {
                $HasReachedLastSuccessContainer = $true;
            }
            Write-Host "Skipping container copy: $($container.Name)"
            Continue;
        }

        Write-Host "Start copying container: $($container.Name)"
        $retry = 1

        # Get AzCopy command for transfer one container
        $destContainer = $destCtx.StorageAccount.CreateCloudBlobClient().GetContainerReference($container.Name)
        $azCopyCmd = [string]::Format("""{0}"" /source:{1} /dest:{2} /sourcekey:""{3}"" /destkey:""{4}"" /snapshot /y /s /synccopy",$AzCopyPath, $container.CloudBlobContainer.Uri.AbsoluteUri, $destContainer.Uri.AbsoluteUri, $srcStorageAccountKey, $DestStorageAccountKey)

        # Execute the AzCopy command first time
        Write-Host "$azCopyCmd"
        $result = cmd /c $azCopyCmd
        foreach($s in $result)
        {
            Write-Host $s 
        }

        # If transfer failed, retry it
        while(($LASTEXITCODE -ne 0) -and ($RetryTimes -eq -1 -or $retry -le $retryTimes))
        {
            Write-Host "Retry $retry : $azCopyCmd"
            $result = cmd /c $azCopyCmd
            foreach($s in $result)
            {
                Write-Host $s 
            }
            $retry++
        }

        # If tranfer failed after retry, print error
        if ($LASTEXITCODE -ne 0){
            Write-Error "Container copy failed: $($container.Name)";
            $CopyContainerFail = $true
            break;
        }
        else
        {
            Write-Host "Finished copying container: $($container.Name)"
            Write-Host ""
            $OutputLastSuccessContainer = $container.Name
        }
    }
    if($CopyContainerFail)
    {
        break;
    }
}
While ($Token -ne $Null)

# Summary the copy result
if ($CopyContainerFail)
{
    if(($OutputLastSuccessContainer -ne $null) -and ($OutputLastSuccessContainer -ne ""))
    {
        Write-Warning "To resume, rerun the script and append the parameter: ""-LastSuccessContainer $OutputLastSuccessContainer"""
        return $OutputLastSuccessContainer
    }
    else
    {
        Write-Warning "To resume, rerun the script."
        return $null
    }
}
else
{
    Write-Host "All Containers copied successfully."
    return ""
}

Betik açıklaması

Betik bir depolama hesabından diğerine verileri kopyalamak için aşağıdaki komutları kullanır. Tablodaki her öğe, komuta özgü belgelere yönlendirir.

Komut	Notlar
Get-AzStorageContainer	Bu depolama hesabıyla ilişkili kapsayıcıları döndürür.
New-AzStorageContext	Azure Depolama bağlamı oluşturur.

Sonraki adımlar

Azure PowerShell modülü hakkında daha fazla bilgi için bkz. Azure PowerShell belgeleri.

Ek depolama PowerShell betiği örnekleri, Azure Blob depolama için Azure PowerShell örneklerinde bulunabilir.

Windows üzerinde AzCopy kullanarak blobları depolama hesapları arasında geçirme

Örnek betik

Betik açıklaması

Sonraki adımlar

Ek kaynaklar