TripleDESCryptoServiceProvider.CreateEncryptor TripleDESCryptoServiceProvider.CreateEncryptor TripleDESCryptoServiceProvider.CreateEncryptor TripleDESCryptoServiceProvider.CreateEncryptor Method

定义

创建对称加密器对象。Creates a symmetric encryptor object.

重载

CreateEncryptor() CreateEncryptor() CreateEncryptor() CreateEncryptor()
CreateEncryptor(Byte[], Byte[]) CreateEncryptor(Byte[], Byte[]) CreateEncryptor(Byte[], Byte[]) CreateEncryptor(Byte[], Byte[])

用指定的密钥 (TripleDES) 和初始化向量 (Key) 创建对称的 IV 加密器对象。Creates a symmetric TripleDES encryptor object with the specified key (Key) and initialization vector (IV).

CreateEncryptor() CreateEncryptor() CreateEncryptor() CreateEncryptor()

public:
 override System::Security::Cryptography::ICryptoTransform ^ CreateEncryptor();
public override System.Security.Cryptography.ICryptoTransform CreateEncryptor ();
override this.CreateEncryptor : unit -> System.Security.Cryptography.ICryptoTransform
Public Overrides Function CreateEncryptor () As ICryptoTransform

返回

CreateEncryptor(Byte[], Byte[]) CreateEncryptor(Byte[], Byte[]) CreateEncryptor(Byte[], Byte[]) CreateEncryptor(Byte[], Byte[])

用指定的密钥 (TripleDES) 和初始化向量 (Key) 创建对称的 IV 加密器对象。Creates a symmetric TripleDES encryptor object with the specified key (Key) and initialization vector (IV).

public:
 override System::Security::Cryptography::ICryptoTransform ^ CreateEncryptor(cli::array <System::Byte> ^ rgbKey, cli::array <System::Byte> ^ rgbIV);
public override System.Security.Cryptography.ICryptoTransform CreateEncryptor (byte[] rgbKey, byte[] rgbIV);
override this.CreateEncryptor : byte[] * byte[] -> System.Security.Cryptography.ICryptoTransform
Public Overrides Function CreateEncryptor (rgbKey As Byte(), rgbIV As Byte()) As ICryptoTransform

参数

rgbKey
Byte[]

用于对称算法的密钥。The secret key to use for the symmetric algorithm.

rgbIV
Byte[]

用于对称算法的初始化向量。The initialization vector to use for the symmetric algorithm.

注意:初始化向量必须长 8 字节。Note: The initialization vector must be 8 bytes long. 如果它的长度大于 8 字节,则会截断它,而不会引发异常。If it is longer than 8 bytes, it is truncated and an exception is not thrown. 调用 CreateEncryptor(Byte[], Byte[]) 之前,请检查初始化向量的长度,如果此向量长度太长,则将引发异常。Before you call CreateEncryptor(Byte[], Byte[]), check the length of the initialization vector and throw an exception if it is too long.

返回

对称 TripleDES 加密器对象。A symmetric TripleDES encryptor object.

异常

Mode 属性的值为 OFBThe value of the Mode property is OFB.

- 或 --or- Mode 属性的值为 CFB,而 FeedbackSize 属性的值不是 8。The value of the Mode property is CFB and the value of the FeedbackSize property is not 8.

- 或 --or- 使用了无效的密钥大小。An invalid key size was used.

- 或 --or- 算法密钥大小不可用。The algorithm key size was not available.

示例

下面的代码示例创建一个 @no__t 0 对象,并使用它对文件中的数据进行加密和解密。The following code example creates a TripleDESCryptoServiceProvider object and uses it to encrypt and decrypt data in a file.

using namespace System;
using namespace System::Security::Cryptography;
using namespace System::Text;
using namespace System::IO;
void EncryptTextToFile( String^ Data, String^ FileName, array<Byte>^Key, array<Byte>^IV )
{
   try
   {
      
      // Create or open the specified file.
      FileStream^ fStream = File::Open( FileName, FileMode::OpenOrCreate );
      
      // Create a CryptoStream using the FileStream 
      // and the passed key and initialization vector (IV).
      CryptoStream^ cStream = gcnew CryptoStream( fStream,(gcnew TripleDESCryptoServiceProvider)->CreateEncryptor( Key, IV ),CryptoStreamMode::Write );
      
      // Create a StreamWriter using the CryptoStream.
      StreamWriter^ sWriter = gcnew StreamWriter( cStream );
      
      // Write the data to the stream 
      // to encrypt it.
      sWriter->WriteLine( Data );
      
      // Close the streams and
      // close the file.
      sWriter->Close();
      cStream->Close();
      fStream->Close();
   }
   catch ( CryptographicException^ e ) 
   {
      Console::WriteLine( "A Cryptographic error occurred: {0}", e->Message );
   }
   catch ( UnauthorizedAccessException^ e ) 
   {
      Console::WriteLine( "A file access error occurred: {0}", e->Message );
   }

}

String^ DecryptTextFromFile( String^ FileName, array<Byte>^Key, array<Byte>^IV )
{
   try
   {
      
      // Create or open the specified file. 
      FileStream^ fStream = File::Open( FileName, FileMode::OpenOrCreate );
      
      // Create a CryptoStream using the FileStream 
      // and the passed key and initialization vector (IV).
      CryptoStream^ cStream = gcnew CryptoStream( fStream,(gcnew TripleDESCryptoServiceProvider)->CreateDecryptor( Key, IV ),CryptoStreamMode::Read );
      
      // Create a StreamReader using the CryptoStream.
      StreamReader^ sReader = gcnew StreamReader( cStream );
      
      // Read the data from the stream 
      // to decrypt it.
      String^ val = sReader->ReadLine();
      
      // Close the streams and
      // close the file.
      sReader->Close();
      cStream->Close();
      fStream->Close();
      
      // Return the string. 
      return val;
   }
   catch ( CryptographicException^ e ) 
   {
      Console::WriteLine( "A Cryptographic error occurred: {0}", e->Message );
      return nullptr;
   }
   catch ( UnauthorizedAccessException^ e ) 
   {
      Console::WriteLine( "A file access error occurred: {0}", e->Message );
      return nullptr;
   }

}

int main()
{
   try
   {
      
      // Create a new TripleDESCryptoServiceProvider object
      // to generate a key and initialization vector (IV).
      TripleDESCryptoServiceProvider^ tDESalg = gcnew TripleDESCryptoServiceProvider;
      
      // Create a string to encrypt.
      String^ sData = "Here is some data to encrypt.";
      String^ FileName = "CText.txt";
      
      // Encrypt text to a file using the file name, key, and IV.
      EncryptTextToFile( sData, FileName, tDESalg->Key, tDESalg->IV );
      
      // Decrypt the text from a file using the file name, key, and IV.
      String^ Final = DecryptTextFromFile( FileName, tDESalg->Key, tDESalg->IV );
      
      // Display the decrypted string to the console.
      Console::WriteLine( Final );
   }
   catch ( Exception^ e ) 
   {
      Console::WriteLine( e->Message );
   }

}

using System;
using System.Security.Cryptography;
using System.Text;
using System.IO;

class TrippleDESCSPSample
{

    static void Main()
    {
        try
        {
            // Create a new TripleDESCryptoServiceProvider object
            // to generate a key and initialization vector (IV).
            TripleDESCryptoServiceProvider tDESalg = new TripleDESCryptoServiceProvider();

            // Create a string to encrypt.
            string sData = "Here is some data to encrypt.";
            string FileName = "CText.txt";

            // Encrypt text to a file using the file name, key, and IV.
            EncryptTextToFile(sData, FileName, tDESalg.Key, tDESalg.IV);

            // Decrypt the text from a file using the file name, key, and IV.
            string Final = DecryptTextFromFile(FileName, tDESalg.Key, tDESalg.IV);
            
            // Display the decrypted string to the console.
            Console.WriteLine(Final);
        }
        catch (Exception e)
        {
            Console.WriteLine(e.Message);
        }
       
    }

    public static void EncryptTextToFile(String Data, String FileName, byte[] Key, byte[] IV)
    {
        try
        {
            // Create or open the specified file.
            FileStream fStream = File.Open(FileName,FileMode.OpenOrCreate);

            // Create a CryptoStream using the FileStream 
            // and the passed key and initialization vector (IV).
            CryptoStream cStream = new CryptoStream(fStream, 
                new TripleDESCryptoServiceProvider().CreateEncryptor(Key,IV), 
                CryptoStreamMode.Write); 

            // Create a StreamWriter using the CryptoStream.
            StreamWriter sWriter = new StreamWriter(cStream);

            // Write the data to the stream 
            // to encrypt it.
            sWriter.WriteLine(Data);
  
            // Close the streams and
            // close the file.
            sWriter.Close();
            cStream.Close();
            fStream.Close();
        }
        catch(CryptographicException e)
        {
            Console.WriteLine("A Cryptographic error occurred: {0}", e.Message);
        }
        catch(UnauthorizedAccessException  e)
        {
            Console.WriteLine("A file access error occurred: {0}", e.Message);
        }

    }

    public static string DecryptTextFromFile(String FileName, byte[] Key, byte[] IV)
    {
        try
        {
            // Create or open the specified file. 
            FileStream fStream = File.Open(FileName, FileMode.OpenOrCreate);
  
            // Create a CryptoStream using the FileStream 
            // and the passed key and initialization vector (IV).
            CryptoStream cStream = new CryptoStream(fStream, 
                new TripleDESCryptoServiceProvider().CreateDecryptor(Key,IV), 
                CryptoStreamMode.Read); 

            // Create a StreamReader using the CryptoStream.
            StreamReader sReader = new StreamReader(cStream);

            // Read the data from the stream 
            // to decrypt it.
            string val = sReader.ReadLine();
    
            // Close the streams and
            // close the file.
            sReader.Close();
            cStream.Close();
            fStream.Close();

            // Return the string. 
            return val;
        }
        catch(CryptographicException e)
        {
            Console.WriteLine("A Cryptographic error occurred: {0}", e.Message);
            return null;
        }
        catch(UnauthorizedAccessException  e)
        {
            Console.WriteLine("A file access error occurred: {0}", e.Message);
            return null;
        }
    }
}
Imports System.Security.Cryptography
Imports System.Text
Imports System.IO

Module TrippleDESCSPSample

    Sub Main()
        Try
            ' Create a new TripleDESCryptoServiceProvider object
            ' to generate a key and initialization vector (IV).
            Dim tDESalg As New TripleDESCryptoServiceProvider

            ' Create a string to encrypt.
            Dim sData As String = "Here is some data to encrypt."
            Dim FileName As String = "CText.txt"

            ' Encrypt text to a file using the file name, key, and IV.
            EncryptTextToFile(sData, FileName, tDESalg.Key, tDESalg.IV)

            ' Decrypt the text from a file using the file name, key, and IV.
            Dim Final As String = DecryptTextFromFile(FileName, tDESalg.Key, tDESalg.IV)

            ' Display the decrypted string to the console.
            Console.WriteLine(Final)
        Catch e As Exception
            Console.WriteLine(e.Message)
        End Try
    End Sub


    Sub EncryptTextToFile(ByVal Data As String, ByVal FileName As String, ByVal Key() As Byte, ByVal IV() As Byte)
        Try
            ' Create or open the specified file.
            Dim fStream As FileStream = File.Open(FileName, FileMode.OpenOrCreate)

            ' Create a CryptoStream using the FileStream 
            ' and the passed key and initialization vector (IV).
            Dim cStream As New CryptoStream(fStream, _
                                            New TripleDESCryptoServiceProvider().CreateEncryptor(Key, IV), _
                                            CryptoStreamMode.Write)

            ' Create a StreamWriter using the CryptoStream.
            Dim sWriter As New StreamWriter(cStream)

            ' Write the data to the stream 
            ' to encrypt it.
            sWriter.WriteLine(Data)

            ' Close the streams and
            ' close the file.
            sWriter.Close()
            cStream.Close()
            fStream.Close()
        Catch e As CryptographicException
            Console.WriteLine("A Cryptographic error occurred: {0}", e.Message)
        Catch e As UnauthorizedAccessException
            Console.WriteLine("A file error occurred: {0}", e.Message)
        End Try
    End Sub


    Function DecryptTextFromFile(ByVal FileName As String, ByVal Key() As Byte, ByVal IV() As Byte) As String
        Try
            ' Create or open the specified file. 
            Dim fStream As FileStream = File.Open(FileName, FileMode.OpenOrCreate)

            ' Create a CryptoStream using the FileStream 
            ' and the passed key and initialization vector (IV).
            Dim cStream As New CryptoStream(fStream, _
                                            New TripleDESCryptoServiceProvider().CreateDecryptor(Key, IV), _
                                            CryptoStreamMode.Read)

            ' Create a StreamReader using the CryptoStream.
            Dim sReader As New StreamReader(cStream)

            ' Read the data from the stream 
            ' to decrypt it.
            Dim val As String = sReader.ReadLine()

            ' Close the streams and
            ' close the file.
            sReader.Close()
            cStream.Close()
            fStream.Close()

            ' Return the string. 
            Return val
        Catch e As CryptographicException
            Console.WriteLine("A Cryptographic error occurred: {0}", e.Message)
            Return Nothing
        Catch e As UnauthorizedAccessException
            Console.WriteLine("A file error occurred: {0}", e.Message)
            Return Nothing
        End Try
    End Function
End Module

下面的代码示例创建一个 @no__t 0 对象,并使用它对内存中的数据进行加密和解密。The following code example creates a TripleDESCryptoServiceProvider object and uses it to encrypt and decrypt data in memory.

using namespace System;
using namespace System::Security::Cryptography;
using namespace System::Text;
using namespace System::IO;
array<Byte>^ EncryptTextToMemory( String^ Data, array<Byte>^Key, array<Byte>^IV )
{
   try
   {
      
      // Create a MemoryStream.
      MemoryStream^ mStream = gcnew MemoryStream;
      
      // Create a CryptoStream using the MemoryStream 
      // and the passed key and initialization vector (IV).
      CryptoStream^ cStream = gcnew CryptoStream( mStream,(gcnew TripleDESCryptoServiceProvider)->CreateEncryptor( Key, IV ),CryptoStreamMode::Write );
      
      // Convert the passed string to a byte array.
      array<Byte>^toEncrypt = (gcnew ASCIIEncoding)->GetBytes( Data );
      
      // Write the byte array to the crypto stream and flush it.
      cStream->Write( toEncrypt, 0, toEncrypt->Length );
      cStream->FlushFinalBlock();
      
      // Get an array of bytes from the 
      // MemoryStream that holds the 
      // encrypted data.
      array<Byte>^ret = mStream->ToArray();
      
      // Close the streams.
      cStream->Close();
      mStream->Close();
      
      // Return the encrypted buffer.
      return ret;
   }
   catch ( CryptographicException^ e ) 
   {
      Console::WriteLine( "A Cryptographic error occurred: {0}", e->Message );
      return nullptr;
   }

}

String^ DecryptTextFromMemory( array<Byte>^Data, array<Byte>^Key, array<Byte>^IV )
{
   try
   {
      
      // Create a new MemoryStream using the passed 
      // array of encrypted data.
      MemoryStream^ msDecrypt = gcnew MemoryStream( Data );
      
      // Create a CryptoStream using the MemoryStream 
      // and the passed key and initialization vector (IV).
      CryptoStream^ csDecrypt = gcnew CryptoStream( msDecrypt,(gcnew TripleDESCryptoServiceProvider)->CreateDecryptor( Key, IV ),CryptoStreamMode::Read );
      
      // Create buffer to hold the decrypted data.
      array<Byte>^fromEncrypt = gcnew array<Byte>(Data->Length);
      
      // Read the decrypted data out of the crypto stream
      // and place it into the temporary buffer.
      csDecrypt->Read( fromEncrypt, 0, fromEncrypt->Length );
      
      //Convert the buffer into a string and return it.
      return (gcnew ASCIIEncoding)->GetString( fromEncrypt );
   }
   catch ( CryptographicException^ e ) 
   {
      Console::WriteLine( "A Cryptographic error occurred: {0}", e->Message );
      return nullptr;
   }

}

int main()
{
   try
   {
      
      // Create a new TripleDESCryptoServiceProvider object
      // to generate a key and initialization vector (IV).
      TripleDESCryptoServiceProvider^ tDESalg = gcnew TripleDESCryptoServiceProvider;
      
      // Create a string to encrypt.
      String^ sData = "Here is some data to encrypt.";
      
      // Encrypt the string to an in-memory buffer.
      array<Byte>^Data = EncryptTextToMemory( sData, tDESalg->Key, tDESalg->IV );
      
      // Decrypt the buffer back to a string.
      String^ Final = DecryptTextFromMemory( Data, tDESalg->Key, tDESalg->IV );
      
      // Display the decrypted string to the console.
      Console::WriteLine( Final );
   }
   catch ( Exception^ e ) 
   {
      Console::WriteLine( e->Message );
   }

}

using System;
using System.Security.Cryptography;
using System.Text;
using System.IO;

class TrippleDESCSPSample
{

    static void Main()
    {
        try
        {
            // Create a new TripleDESCryptoServiceProvider object
            // to generate a key and initialization vector (IV).
            TripleDESCryptoServiceProvider tDESalg = new TripleDESCryptoServiceProvider();

            // Create a string to encrypt.
            string sData = "Here is some data to encrypt.";

            // Encrypt the string to an in-memory buffer.
            byte[] Data = EncryptTextToMemory(sData, tDESalg.Key, tDESalg.IV);

            // Decrypt the buffer back to a string.
            string Final = DecryptTextFromMemory(Data, tDESalg.Key, tDESalg.IV);
            
            // Display the decrypted string to the console.
            Console.WriteLine(Final);
        }
        catch (Exception e)
        {
            Console.WriteLine(e.Message);
        }
       
    }

    public static byte[] EncryptTextToMemory(string Data,  byte[] Key, byte[] IV)
    {
        try
        {
            // Create a MemoryStream.
            MemoryStream mStream = new MemoryStream();

            // Create a CryptoStream using the MemoryStream 
            // and the passed key and initialization vector (IV).
            CryptoStream cStream = new CryptoStream(mStream, 
                new TripleDESCryptoServiceProvider().CreateEncryptor(Key, IV), 
                CryptoStreamMode.Write);

            // Convert the passed string to a byte array.
            byte[] toEncrypt = new ASCIIEncoding().GetBytes(Data);

            // Write the byte array to the crypto stream and flush it.
            cStream.Write(toEncrypt, 0, toEncrypt.Length);
            cStream.FlushFinalBlock();
        
            // Get an array of bytes from the 
            // MemoryStream that holds the 
            // encrypted data.
            byte[] ret = mStream.ToArray();

            // Close the streams.
            cStream.Close();
            mStream.Close();

            // Return the encrypted buffer.
            return ret;
        }
        catch(CryptographicException e)
        {
            Console.WriteLine("A Cryptographic error occurred: {0}", e.Message);
            return null;
        }

    }

    public static string DecryptTextFromMemory(byte[] Data,  byte[] Key, byte[] IV)
    {
        try
        {
            // Create a new MemoryStream using the passed 
            // array of encrypted data.
            MemoryStream msDecrypt = new MemoryStream(Data);

            // Create a CryptoStream using the MemoryStream 
            // and the passed key and initialization vector (IV).
            CryptoStream csDecrypt = new CryptoStream(msDecrypt, 
                new TripleDESCryptoServiceProvider().CreateDecryptor(Key, IV), 
                CryptoStreamMode.Read);

            // Create buffer to hold the decrypted data.
            byte[] fromEncrypt = new byte[Data.Length];

            // Read the decrypted data out of the crypto stream
            // and place it into the temporary buffer.
            csDecrypt.Read(fromEncrypt, 0, fromEncrypt.Length);

            //Convert the buffer into a string and return it.
            return new ASCIIEncoding().GetString(fromEncrypt);
        }
        catch(CryptographicException e)
        {
            Console.WriteLine("A Cryptographic error occurred: {0}", e.Message);
            return null;
        }
    }
}
Imports System.Security.Cryptography
Imports System.Text
Imports System.IO

Module TrippleDESCSPSample

    Sub Main()
        Try
            ' Create a new TripleDESCryptoServiceProvider object
            ' to generate a key and initialization vector (IV).
            Dim tDESalg As New TripleDESCryptoServiceProvider

            ' Create a string to encrypt.
            Dim sData As String = "Here is some data to encrypt."

            ' Encrypt the string to an in-memory buffer.
            Dim Data As Byte() = EncryptTextToMemory(sData, tDESalg.Key, tDESalg.IV)

            ' Decrypt the buffer back to a string.
            Dim Final As String = DecryptTextFromMemory(Data, tDESalg.Key, tDESalg.IV)

            ' Display the decrypted string to the console.
            Console.WriteLine(Final)
        Catch e As Exception
            Console.WriteLine(e.Message)
        End Try
    End Sub


    Function EncryptTextToMemory(ByVal Data As String, ByVal Key() As Byte, ByVal IV() As Byte) As Byte()
        Try
            ' Create a MemoryStream.
            Dim mStream As New MemoryStream

            ' Create a CryptoStream using the MemoryStream 
            ' and the passed key and initialization vector (IV).
            Dim cStream As New CryptoStream(mStream, _
                                            New TripleDESCryptoServiceProvider().CreateEncryptor(Key, IV), _
                                            CryptoStreamMode.Write)

            ' Convert the passed string to a byte array.
            Dim toEncrypt As Byte() = New ASCIIEncoding().GetBytes(Data)

            ' Write the byte array to the crypto stream and flush it.
            cStream.Write(toEncrypt, 0, toEncrypt.Length)
            cStream.FlushFinalBlock()

            ' Get an array of bytes from the 
            ' MemoryStream that holds the 
            ' encrypted data.
            Dim ret As Byte() = mStream.ToArray()

            ' Close the streams.
            cStream.Close()
            mStream.Close()

            ' Return the encrypted buffer.
            Return ret
        Catch e As CryptographicException
            Console.WriteLine("A Cryptographic error occurred: {0}", e.Message)
            Return Nothing
        End Try
    End Function


    Function DecryptTextFromMemory(ByVal Data() As Byte, ByVal Key() As Byte, ByVal IV() As Byte) As String
        Try
            ' Create a new MemoryStream using the passed 
            ' array of encrypted data.
            Dim msDecrypt As New MemoryStream(Data)

            ' Create a CryptoStream using the MemoryStream 
            ' and the passed key and initialization vector (IV).
            Dim csDecrypt As New CryptoStream(msDecrypt, _
                                              New TripleDESCryptoServiceProvider().CreateDecryptor(Key, IV), _
                                              CryptoStreamMode.Read)

            ' Create buffer to hold the decrypted data.
            Dim fromEncrypt(Data.Length - 1) As Byte

            ' Read the decrypted data out of the crypto stream
            ' and place it into the temporary buffer.
            csDecrypt.Read(fromEncrypt, 0, fromEncrypt.Length)

            'Convert the buffer into a string and return it.
            Return New ASCIIEncoding().GetString(fromEncrypt)
        Catch e As CryptographicException
            Console.WriteLine("A Cryptographic error occurred: {0}", e.Message)
            Return Nothing
        End Try
    End Function
End Module

注解

使用具有相同参数的 @no__t 0 重载来解密此方法的结果。Use the CreateDecryptor overload with the same parameters to decrypt the result of this method.

另请参阅

适用于