Single.NaN 字段

定义

表示非数字 (NaN)。 此字段为常数。

public: float NaN = NaN;
public const float NaN = NaN;
val mutable NaN : single
Public Const NaN As Single  = NaN

字段值

Value = NaN

示例

以下示例演示 常 NaN 量。

Single zero = 0;

// This condition will return false.
if ( (0 / zero) == Single::NaN )
{
   Console::WriteLine( "0 / 0 can be tested with Single::NaN." );
}
else
{
   Console::WriteLine( "0 / 0 cannot be tested with Single::NaN; use Single::IsNan() instead." );
}
Single zero = 0;

// This condition will return false.
if ((0 / zero) == Single.NaN)
{
    Console.WriteLine("0 / 0 can be tested with Single.NaN.");
}
else
{
    Console.WriteLine("0 / 0 cannot be tested with Single.NaN; use Single.IsNan() instead.");
}
let zero = 0f

// This condition will return false.
if 0f / zero = Single.NaN then
    printfn "0 / 0 can be tested with Single.NaN."
else
    printfn "0 / 0 cannot be tested with Single.NaN use Single.IsNan() instead."
Dim zero As Single = 0

' This condition will return false.
If (0 / zero) = Single.NaN Then
    Console.WriteLine("0 / 0 can be tested with Single.NaN.")
Else
    Console.WriteLine("0 / 0 cannot be tested with Single.NaN; use Single.IsNan() instead.")
End If

注解

当操作的结果未定义时,方法或运算符返回 NaN 。 例如,将零除以零的结果为 NaN,如以下示例所示。 (但请注意,将非零数除以零将 PositiveInfinity 返回 或 NegativeInfinity,具体取决于 divisor 的符号。)

float zero = 0.0f;
Console.WriteLine("{0} / {1} = {2}", zero, zero, zero/zero);
// The example displays the following output:
//         0 / 0 = NaN
let zero = 0f
printfn $"{zero} / {zero} = {zero / zero}"
// The example displays the following output:
//         0 / 0 = NaN
Dim zero As Single = 0
Console.WriteLine("{0} / {1} = {2}", zero, zero, zero/zero)
' The example displays the following output:
'         0 / 0 = NaN

此外,使用 NaN 值或对 NaN 值执行操作的方法调用将 NaN返回 ,如以下示例所示。

float nan1 = Single.NaN;

Console.WriteLine("{0} + {1} = {2}", 3, nan1, 3 + nan1);
Console.WriteLine("Abs({0}) = {1}", nan1, Math.Abs(nan1));
// The example displays the following output:
//       3 + NaN = NaN
//       Abs(NaN) = NaN
let nan1 = Single.NaN

printfn $"{3} + {nan1} = {3f + nan1}"
printfn $"Abs({nan1}) = {abs nan1}"
// The example displays the following output:
//       3 + NaN = NaN
//       Abs(NaN) = NaN
Dim nan1 As Single = Single.NaN

Console.WriteLine("{0} + {1} = {2}", 3, nan1, 3 + nan1)
Console.WriteLine("Abs({0}) = {1}", nan1, Math.Abs(nan1))
' The example displays the following output:
'       3 + NaN = NaN
'       Abs(NaN) = NaN

IsNaN使用 方法确定值是否不是数字。 一般情况下,Single运算符不能用于与其他Single值进行比较Single.NaN,尽管 (和) 等EqualsCompareTo 比较方法可以。 以下示例演示比较运算符和方法之间的 Single 行为差异。

using System;

public class Example
{
   public static void Main()
   {
      Console.WriteLine("NaN == NaN: {0}", Single.NaN == Single.NaN); 
      Console.WriteLine("NaN != NaN: {0}", Single.NaN != Single.NaN); 
      Console.WriteLine("NaN.Equals(NaN): {0}", Single.NaN.Equals(Single.NaN)); 
      Console.WriteLine("! NaN.Equals(NaN): {0}", ! Single.NaN.Equals(Single.NaN)); 
      Console.WriteLine("IsNaN: {0}", Double.IsNaN(Double.NaN));
      
      Console.WriteLine("\nNaN > NaN: {0}", Single.NaN > Single.NaN); 
      Console.WriteLine("NaN >= NaN: {0}", Single.NaN >= Single.NaN); 
      Console.WriteLine("NaN < NaN: {0}", Single.NaN < Single.NaN);
      Console.WriteLine("NaN < 100.0: {0}", Single.NaN < 100.0f); 
      Console.WriteLine("NaN <= 100.0: {0}", Single.NaN <= 100.0f); 
      Console.WriteLine("NaN >= 100.0: {0}", Single.NaN > 100.0f);
      Console.WriteLine("NaN.CompareTo(NaN): {0}", Single.NaN.CompareTo(Single.NaN)); 
      Console.WriteLine("NaN.CompareTo(100.0): {0}", Single.NaN.CompareTo(100.0f)); 
      Console.WriteLine("(100.0).CompareTo(Single.NaN): {0}", (100.0f).CompareTo(Single.NaN)); 
   }
}
// The example displays the following output:
//       NaN == NaN: False
//       NaN != NaN: True
//       NaN.Equals(NaN): True
//       ! NaN.Equals(NaN): False
//       IsNaN: True
//
//       NaN > NaN: False
//       NaN >= NaN: False
//       NaN < NaN: False
//       NaN < 100.0: False
//       NaN <= 100.0: False
//       NaN >= 100.0: False
//       NaN.CompareTo(NaN): 0
//       NaN.CompareTo(100.0): -1
//       (100.0).CompareTo(Single.NaN): 1
open System

printfn $"NaN == NaN: {Single.NaN = Single.NaN}"
printfn $"NaN != NaN: {Single.NaN <> Single.NaN}"
printfn $"NaN.Equals(NaN): {Single.NaN.Equals Single.NaN}"
printfn $"! NaN.Equals(NaN): {not (Single.NaN.Equals Single.NaN)}"
printfn $"IsNaN: {Double.IsNaN Double.NaN}"

printfn $"\nNaN > NaN: {Single.NaN > Single.NaN}"
printfn $"NaN >= NaN: {Single.NaN >= Single.NaN}"
printfn $"NaN < NaN: {Single.NaN < Single.NaN}"
printfn $"NaN < 100.0: {Single.NaN < 100f}"
printfn $"NaN <= 100.0: {Single.NaN <= 100f}"
printfn $"NaN >= 100.0: {Single.NaN > 100f}"
printfn $"NaN.CompareTo(NaN): {Single.NaN.CompareTo Single.NaN}"
printfn $"NaN.CompareTo(100.0): {Single.NaN.CompareTo 100f}"
printfn $"(100.0).CompareTo(Single.NaN): {100f.CompareTo Single.NaN}"
// The example displays the following output:
//       NaN == NaN: False
//       NaN != NaN: True
//       NaN.Equals(NaN): True
//       ! NaN.Equals(NaN): False
//       IsNaN: True
//
//       NaN > NaN: False
//       NaN >= NaN: False
//       NaN < NaN: False
//       NaN < 100.0: False
//       NaN <= 100.0: False
//       NaN >= 100.0: False
//       NaN.CompareTo(NaN): 0
//       NaN.CompareTo(100.0): -1
//       (100.0).CompareTo(Single.NaN): 1
Module Example
   Public Sub Main()
      Console.WriteLine("NaN = NaN: {0}", Single.NaN = Single.NaN) 
      Console.WriteLine("NaN <> NaN: {0}", Single.NaN <> Single.NaN) 
      Console.WriteLine("NaN.Equals(NaN): {0}", Single.NaN.Equals(Single.NaN)) 
      Console.WriteLine("Not NaN.Equals(NaN): {0}", Not Single.NaN.Equals(Single.NaN)) 
      Console.WriteLine("IsNaN: {0}", Double.IsNaN(Double.NaN))
      Console.WriteLine()
      Console.WriteLine("NaN > NaN: {0}", Single.NaN > 100.0f) 
      Console.WriteLine("NaN >= NaN: {0}", Single.NaN >= 100.0f) 
      Console.WriteLine("NaN < NaN: {0}", Single.NaN < Single.NaN)
      Console.WriteLine("NaN < 100.0: {0}", Single.NaN < 100.0f) 
      Console.WriteLine("NaN <= 100.0: {0}", Single.NaN <= 100.0f) 
      Console.WriteLine("NaN >= 100.0: {0}", Single.NaN > 100.0f)
      Console.WriteLine("NaN.CompareTo(NaN): {0}", Single.NaN.CompareTo(Single.Nan)) 
      Console.WriteLine("NaN.CompareTo(100.0): {0}", Single.NaN.CompareTo(100.0f)) 
      Console.WriteLine("(100.0).CompareTo(Single.NaN): {0}", (100.0f).CompareTo(Single.NaN)) 
   End Sub
End Module
' The example displays the following output:
'       NaN == NaN: False
'       NaN != NaN: True
'       NaN.Equals(NaN): True
'       ! NaN.Equals(NaN): False
'       IsNaN: True
'
'       NaN > NaN: False
'       NaN >= NaN: False
'       NaN < NaN: False
'       NaN < 100.0: False
'       NaN <= 100.0: False
'       NaN >= 100.0: False
'       NaN.CompareTo(NaN): 0
'       NaN.CompareTo(100.0): -1
'       (100.0).CompareTo(Single.NaN): 1

适用于

另请参阅