AccessibleNavigation AccessibleNavigation AccessibleNavigation AccessibleNavigation Enum

定义

指定用于在辅助性对象之间进行定位的值。Specifies values for navigating among accessible objects.

public enum class AccessibleNavigation
public enum AccessibleNavigation
type AccessibleNavigation = 
Public Enum AccessibleNavigation
继承
AccessibleNavigationAccessibleNavigationAccessibleNavigationAccessibleNavigation

字段

Down Down Down Down 2

到位于起始对象下的同级对象的导航。Navigation to a sibling object located below the starting object.

FirstChild FirstChild FirstChild FirstChild 7

到对象的第一个子级的导航。Navigation to the first child of the object.

LastChild LastChild LastChild LastChild 8

到对象的最后一个子级的导航。Navigation to the last child of the object.

Left Left Left Left 3

到位于起始对象左边的同级对象的导航。Navigation to the sibling object located to the left of the starting object.

Next Next Next Next 5

到下一个逻辑对象的导航,通常是从同级对象到起始对象。Navigation to the next logical object, typically from a sibling object to the starting object.

Previous Previous Previous Previous 6

到前一个逻辑对象的导航,通常是从同级对象到起始对象。Navigation to the previous logical object, typically from a sibling object to the starting object.

Right Right Right Right 4

到位于起始对象右边的同级对象的导航。Navigation to the sibling object located to the right of the starting object.

Up Up Up Up 1

到位于起始对象上边的同级对象的导航。Navigation to a sibling object located above the starting object.

示例

下面的代码示例演示如何创建可访问感知的图表控件, AccessibleObject并使用和Control.ControlAccessibleObject类公开可访问的信息。The following code example demonstrates the creation of an accessibility-aware chart control, using the AccessibleObject and Control.ControlAccessibleObject classes to expose accessible information. 控件将两条曲线与图例一起绘制。The control plots two curves along with a legend. CreateAccessibilityInstanceChartControlAccessibleObject 派生的类在方法中用于为图表控件提供自定义的可访问信息。ControlAccessibleObjectThe ChartControlAccessibleObject class, which derives from ControlAccessibleObject, is used in the CreateAccessibilityInstance method to provide custom accessible information for the chart control. 因为图表图例不是实际Control的控件, 而是由图表控件绘制的, 所以它不是任何内置的可访问信息。Since the chart legend is not an actual Control -based control, but instead is drawn by the chart control, it does not any built-in accessible information. 因此, ChartControlAccessibleObjectCurveLegendAccessibleObjectGetChild重写方法以返回, 该方法表示图例的每个部分的可访问信息。Because of this, the ChartControlAccessibleObject class overrides the GetChild method to return the CurveLegendAccessibleObject that represents accessible information for each part of the legend. 当可访问感知的应用程序使用此控件时, 控件可以提供必需的可访问信息。When an accessible-aware application uses this control, the control can provide the necessary accessible information.

此示例演示如何通过AccessibleNavigation Navigate方法使用枚举。This example demonstrates using the AccessibleNavigation enumeration with the Navigate method. 有关完整的代码示例, 请参阅类概述。AccessibleObjectSee the AccessibleObject class overview for the complete code example.

// Inner class ChartControlAccessibleObject represents accessible information associated with the ChartControl.
// The ChartControlAccessibleObject is returned in the ChartControl::CreateAccessibilityInstance .
ref class ChartControlAccessibleObject: public ControlAccessibleObject
{
private:
   ChartControl^ chartControl;

public:
   ChartControlAccessibleObject( ChartControl^ ctrl )
      : ControlAccessibleObject( ctrl )
   {
      chartControl = ctrl;
   }


   property System::Windows::Forms::AccessibleRole Role 
   {

      // Gets the role for the Chart. This is used by accessibility programs.
      virtual System::Windows::Forms::AccessibleRole get() override
      {
         return ::AccessibleRole::Chart;
      }

   }

   property AccessibleStates State 
   {

      // Gets the state for the Chart. This is used by accessibility programs.
      virtual AccessibleStates get() override
      {
         return AccessibleStates::ReadOnly;
      }

   }

   // The CurveLegend objects are "child" controls in terms of accessibility so
   // return the number of ChartLengend objects.
   virtual int GetChildCount() override
   {
      return chartControl->Legends->Length;
   }


   // Gets the Accessibility object of the child CurveLegend idetified by index.
   virtual AccessibleObject^ GetChild( int index ) override
   {
      if ( index >= 0 && index < chartControl->Legends->Length )
      {
         return chartControl->Legends[ index ]->AccessibilityObject;
      }

      return nullptr;
   }


internal:

   // Helper function that is used by the CurveLegend's accessibility object
   // to navigate between sibiling controls. Specifically, this function is used in
   // the CurveLegend::CurveLegendAccessibleObject.Navigate function.
   AccessibleObject^ NavigateFromChild( CurveLegend::CurveLegendAccessibleObject^ child, AccessibleNavigation navdir )
   {
      switch ( navdir )
      {
         case AccessibleNavigation::Down:
         case AccessibleNavigation::Next:
            return GetChild( child->ID + 1 );

         case AccessibleNavigation::Up:
         case AccessibleNavigation::Previous:
            return GetChild( child->ID - 1 );
      }
      return nullptr;
   }


   // Helper function that is used by the CurveLegend's accessibility object
   // to select a specific CurveLegend control. Specifically, this function is used
   // in the CurveLegend::CurveLegendAccessibleObject.Select function.
   void SelectChild( CurveLegend::CurveLegendAccessibleObject^ child, AccessibleSelection selection )
   {
      int childID = child->ID;
      
      // Determine which selection action should occur, based on the
      // AccessibleSelection value.
      if ( (selection & AccessibleSelection::TakeSelection) != (AccessibleSelection)0 )
      {
         for ( int i = 0; i < chartControl->Legends->Length; i++ )
         {
            if ( i == childID )
            {
               chartControl->Legends[ i ]->Selected = true;
            }
            else
            {
               chartControl->Legends[ i ]->Selected = false;
            }

         }
         
         // AccessibleSelection->AddSelection means that the CurveLegend will be selected.
         if ( (selection & AccessibleSelection::AddSelection) != (AccessibleSelection)0 )
         {
            chartControl->Legends[ childID ]->Selected = true;
         }
         
         // AccessibleSelection->AddSelection means that the CurveLegend will be unselected.
         if ( (selection & AccessibleSelection::RemoveSelection) != (AccessibleSelection)0 )
         {
            chartControl->Legends[ childID ]->Selected = false;
         }
      }
   }

};

// class ChartControlAccessibleObject
// Inner class ChartControlAccessibleObject represents accessible information associated with the ChartControl.
// The ChartControlAccessibleObject is returned in the ChartControl.CreateAccessibilityInstance override.
public class ChartControlAccessibleObject : ControlAccessibleObject
{
    ChartControl chartControl;

    public ChartControlAccessibleObject(ChartControl ctrl) : base(ctrl) 
    {
        chartControl = ctrl;
    }

    // Gets the role for the Chart. This is used by accessibility programs.
    public override AccessibleRole Role
    {  
        get {
            return AccessibleRole.Chart;
        }
    }

    // Gets the state for the Chart. This is used by accessibility programs.
    public override AccessibleStates State
    {  
        get {                    
            return AccessibleStates.ReadOnly;
        }
    }

    // The CurveLegend objects are "child" controls in terms of accessibility so 
    // return the number of ChartLengend objects.
    public override int GetChildCount()
    {  
        return chartControl.Legends.Length;
    }

    // Gets the Accessibility object of the child CurveLegend idetified by index.
    public override AccessibleObject GetChild(int index)
    {  
        if (index >= 0 && index < chartControl.Legends.Length) {
            return chartControl.Legends[index].AccessibilityObject;
        }                
        return null;
    }

    // Helper function that is used by the CurveLegend's accessibility object
    // to navigate between sibiling controls. Specifically, this function is used in
    // the CurveLegend.CurveLegendAccessibleObject.Navigate function.
    internal AccessibleObject NavigateFromChild(CurveLegend.CurveLegendAccessibleObject child, 
                                                AccessibleNavigation navdir) 
    {  
        switch(navdir) {
            case AccessibleNavigation.Down:
            case AccessibleNavigation.Next:
                return GetChild(child.ID + 1);
                
            case AccessibleNavigation.Up:
            case AccessibleNavigation.Previous:
                return GetChild(child.ID - 1);                        
        }
        return null;
    }

    // Helper function that is used by the CurveLegend's accessibility object
    // to select a specific CurveLegend control. Specifically, this function is used
    // in the CurveLegend.CurveLegendAccessibleObject.Select function.
    internal void SelectChild(CurveLegend.CurveLegendAccessibleObject child, AccessibleSelection selection) 
    {   
        int childID = child.ID;

        // Determine which selection action should occur, based on the
        // AccessibleSelection value.
        if ((selection & AccessibleSelection.TakeSelection) != 0) {
            for(int i = 0; i < chartControl.Legends.Length; i++) {
                if (i == childID) {
                    chartControl.Legends[i].Selected = true;                        
                } else {
                    chartControl.Legends[i].Selected = false;
                }
            }

            // AccessibleSelection.AddSelection means that the CurveLegend will be selected.
            if ((selection & AccessibleSelection.AddSelection) != 0) {
                chartControl.Legends[childID].Selected = true;                        
            }

            // AccessibleSelection.AddSelection means that the CurveLegend will be unselected.
            if ((selection & AccessibleSelection.RemoveSelection) != 0) {
                chartControl.Legends[childID].Selected = false;                        
            }
        }            
    }
}
' Inner Class ChartControlAccessibleObject represents accessible information 
' associated with the ChartControl.
' The ChartControlAccessibleObject is returned in the         ' ChartControl.CreateAccessibilityInstance override.
Public Class ChartControlAccessibleObject
    Inherits Control.ControlAccessibleObject

    Private chartControl As ChartControl
    
    Public Sub New(ctrl As ChartControl)
        MyBase.New(ctrl)
        chartControl = ctrl
    End Sub
    
    ' Get the role for the Chart. This is used by accessibility programs.            
    Public Overrides ReadOnly Property Role() As AccessibleRole
        Get
            Return System.Windows.Forms.AccessibleRole.Chart
        End Get
    End Property
    
    ' Get the state for the Chart. This is used by accessibility programs.            
    Public Overrides ReadOnly Property State() As AccessibleStates
        Get
            Return AccessibleStates.ReadOnly
        End Get
    End Property                        
    
    ' The CurveLegend objects are "child" controls in terms of accessibility so 
    ' return the number of ChartLengend objects.            
    Public Overrides Function GetChildCount() As Integer
        Return chartControl.Legends.Length
    End Function 
    
    ' Get the Accessibility object of the child CurveLegend idetified by index.
    Public Overrides Function GetChild(index As Integer) As AccessibleObject
        If index >= 0 And index < chartControl.Legends.Length Then
            Return chartControl.Legends(index).AccessibilityObject
        End If
        Return Nothing
    End Function 
    
    ' Helper function that is used by the CurveLegend's accessibility object
    ' to navigate between sibiling controls. Specifically, this function is used in
    ' the CurveLegend.CurveLegendAccessibleObject.Navigate function.
    Friend Function NavigateFromChild(child As CurveLegend.CurveLegendAccessibleObject, _
                                    navdir As AccessibleNavigation) As AccessibleObject
        Select Case navdir
            Case AccessibleNavigation.Down, AccessibleNavigation.Next
                    Return GetChild(child.ID + 1)
            
            Case AccessibleNavigation.Up, AccessibleNavigation.Previous
                    Return GetChild(child.ID - 1)
        End Select
        Return Nothing
    End Function            

    ' Helper function that is used by the CurveLegend's accessibility object
    ' to select a specific CurveLegend control. Specifically, this function is used 
    ' in the CurveLegend.CurveLegendAccessibleObject.Select function.            
    Friend Sub SelectChild(child As CurveLegend.CurveLegendAccessibleObject, selection As AccessibleSelection)
        Dim childID As Integer = child.ID
        
        ' Determine which selection action should occur, based on the
        ' AccessibleSelection value.
        If (selection And AccessibleSelection.TakeSelection) <> 0 Then
            Dim i As Integer
            For i = 0 To chartControl.Legends.Length - 1
                If i = childID Then
                    chartControl.Legends(i).Selected = True
                Else
                    chartControl.Legends(i).Selected = False
                End If
            Next i
            
            ' AccessibleSelection.AddSelection means that the CurveLegend will be selected.
            If (selection And AccessibleSelection.AddSelection) <> 0 Then
                chartControl.Legends(childID).Selected = True
            End If

            ' AccessibleSelection.AddSelection means that the CurveLegend will be unselected.                    
            If (selection And AccessibleSelection.RemoveSelection) <> 0 Then
                chartControl.Legends(childID).Selected = False
            End If
        End If
    End Sub
End Class

注解

可访问的导航方向包括空间 (向上、向下、向左和向右) 或逻辑 (第一个子、最后一个子、下一个和上一个)。Accessible navigation directions are either spatial (up, down, left, and right) or logical (first child, last child, next, and previous). 当客户端从同一容器中的一个用户界面元素导航到另一个时, 使用逻辑方向。Logical directions are used when clients navigate from one user interface element to another within the same container.

AccessibleObject使用此枚举。AccessibleObject uses this enumeration.

有关辅助功能应用程序的详细信息, 请在 MSDN library 中搜索 "Microsoft Active Accessibility" 主题。For more information about the accessibility application, search for the "Microsoft Active Accessibility" topic in the MSDN library.

适用于

另请参阅