配置一个完全限定的域名称Configure a fully qualified domain name

您可以配置的统一消息 (UM) IP 网关与 IP 地址或完全限定的域名 (FQDN)。创建一个 UM IP 网关时,您必须定义的 IP 地址或 FQDN 配置 VoIP 网关、 IP PBX 或您正在使用的会话边界控制器 (SBC) 上。创建 UM IP 网关之后,可以更改的 IP 地址或 FQDN。You can configure a Unified Messaging (UM) IP gateway with either an IP address or a fully qualified domain name (FQDN). When you create a UM IP gateway, you must define the IP address or the FQDN configured on the VoIP gateway, IP PBX, or session border controller (SBC) that you're using. You can change the IP address or FQDN after the UM IP gateway is created.

如果您创建 UM IP 网关使用 FQDN,则必须在 DNS 正向查找区域中创建相应的主机 (A) 记录。如果您创建 UM IP 网关使用的 FQDN,并更改 UM IP 网关的 DNS 配置,您必须禁用,然后再启用的 UM IP 网关,以确保正确更新为其配置信息。If you create a UM IP gateway using an FQDN, you must create the appropriate HOST (A) records in your DNS forward lookup zone. If you create a UM IP gateway using an FQDN, and the DNS configuration for the UM IP gateway is changed, you must disable and then enable the UM IP gateway to make sure that its configuration information is updated correctly.

如果您想要使用相互传输层安全 (相互 TLS) 之间的 UM IP 网关和拨号计划在操作系统 SIP 安全或安全模式,您必须配置 UM IP 网关 fqdn。您还必须配置其侦听端口 5061 并确认 VoIP 网关、 IP PBX 或 SBC 也已配置为端口 5061 上的相互 TLS 请求进行侦听。若要配置的 UM IP 网关,请运行以下命令: Set-UMIPGateway -identity MyUMIPGateway -Port 5061If you want to use mutual Transport Layer Security (mutual TLS) between a UM IP gateway and a dial plan operating in either SIP secured or Secured mode, you must configure the UM IP gateway with an FQDN. You must also configure it to listen on port 5061 and verify that the VoIP gateway, IP PBX, or SBC has also been configured to listen for mutual TLS requests on port 5061. To configure a UM IP gateway, run the following command: Set-UMIPGateway -identity MyUMIPGateway -Port 5061.

有关 UM IP 网关的更多管理任务,请参阅UM IP 网关过程For additional management tasks related to UM IP gateways, see UM IP gateway procedures.

在开始之前,您需要知道什么?What do you need to know before you begin?

  • 估计完成时间:2 分钟。Estimated time to complete: 2 minutes.

  • 您需要执行此过程之前为其分配权限。若要查看所需的权限,请参阅Messaging Permissions主题中的"UM IP 网关"条目。You need to be assigned permissions before you can perform this procedure or procedures. To see what permissions you need, see the "UM IP gateways" entry in the Unified Messaging Permissions topic.

  • 在执行这些步骤之前,先确认已创建 UM 拨号计划。有关详细步骤,请参阅创建 UM 拨号计划Before you perform these procedures, confirm that a UM dial plan has been created. For detailed steps, see Create a UM dial plan.

  • 在执行这些步骤之前,请确认已创建 UM IP 网关。有关详细步骤,请参阅创建 UM IP 网关Before you perform these procedures, confirm that a UM IP gateway has been created. For detailed steps, see Create a UM IP gateway.

  • 若要了解可能适用于此主题中过程的键盘快捷键,请参阅 Exchange 管理中心内的键盘快捷键For information about keyboard shortcuts that may apply to the procedures in this topic, see Keyboard shortcuts in the Exchange admin center.

提示

遇到问题了吗?请在 Exchange 论坛中寻求帮助。 请访问以下论坛:Exchange ServerExchange OnlineExchange Online Protection。.Having problems? Ask for help in the Exchange forums. Visit the forums at Exchange Server,Exchange Online, or Exchange Online Protection..

您想执行什么操作?What do you want to do?

使用 EAC 配置 FQDNUse the EAC to configure an FQDN

  1. 在 EAC 中,导航到统一消息 > UM IP 网关,选择您想要修改的 UM IP 网关,然后单击编辑编辑图标In the EAC, navigate to Unified Messaging > UM IP Gateways, select the UM IP gateway that you want to modify, and then click EditEdit icon.

  2. UM IP 网关页上,在地址中,输入用于 VoIP 网关、 IP PBX 或 SBC SIP 的 PBX 的 FQDN。On the UM IP gateway page, in Address, enter the FQDN for the VoIP gateway, PBX enabled for SIP, IP PBX, or SBC.

  3. 键入所需的项目保留天数。Click Save.

重要

如果在 UM IP 网关上使用 FQDN(而不是 IP 地址),请验证是否已创建正确的 DNS 记录。When you use an FQDN instead of an IP address on the UM IP gateway, verify that the correct DNS records have been created.

使用命令行管理程序配置 FQDNUse the Shell to configure an FQDN

本示例为名为 MyUMIPGateway 的 UM IP 网关配置了名为 voipgateway.contoso.com 的 FQDN。This example configures a UM IP gateway named MyUMIPGateway with an FQDN named voipgateway.contoso.com.

Set-UMIPGateway -Identity MyUMIPGateway -Address voipgateway.contoso.com

本示例为名为 MySBC 的 UM IP 的网关配置了 sbc.contoso.com 的 FQDN,并在 TCP 端口 5061 上侦听 SIP 请求。This example configures a UM IP gateway named MySBC with an FQDN of sbc.contoso.com and listens for SIP requests on TCP port 5061.

Set-UMIPGateway -Identity MySBC -Address sbc.contoso.com -Port 5061