删除 SIP 地址Remove a SIP address

当您启用 UM 的用户,并将它们链接到 SIP URI 拨号计划时,创建两个 EUM 代理地址。一个包含用户的分机号码,另一个包含用户的 SIP 地址。用户连接到 Outlook Voice Access 号码时使用的分机号码。When you enable a user for UM and link them to a SIP URI dial plan, two EUM proxy addresses are created. One contains the user's extension number and the other contains a SIP address for the user. The extension number is used when the user calls in to an Outlook Voice Access number.

您正在集成 UM 和 Microsoft Office Communications Server 2007 R2 或 Microsoft Lync Server 时使用的 SIP URI 拨号计划和 SIP 地址。Communications Server 或 Lync Server 使用的 SIP 地址路由传入呼叫,并向用户发送语音邮件。默认情况下,由 UM 的 SIP 地址将使用 Communications Server 或 Lync Server 的 SIP 地址。SIP URI dial plans and SIP addresses are used when you're integrating UM and Microsoft Office Communications Server 2007 R2 or Microsoft Lync Server. The SIP address is used by Communications Server or Lync Server to route incoming calls and send voice mail to the user. By default, the SIP address that's used by UM will be the SIP address that's used by Communications Server or Lync Server.

您可以删除已添加时用户已启用 um 的主 SIP 地址或更高版本,以及用户的 EUM 代理地址添加辅助 SIP 地址。添加时用户已启用 um 的主 SIP 地址中都列示为主 EUM 代理地址。您添加任何其他 SIP 地址中都列示为辅助 EUM 代理地址。删除 SIP 地址后,呼叫者可以不再保留已删除,即使用户使用分配给 Communications Server 或 Lync Server 用户的 SIP 地址登录的 SIP 地址的用户的语音邮件。You can remove the primary SIP address that was added when the user was enabled for UM or a secondary SIP address that was added later, along with the EUM proxy address for the user. The primary SIP address you added when the user was enabled for UM will be listed as the primary EUM proxy address. Any additional SIP addresses you added will be listed as secondary EUM proxy addresses. When a SIP address is removed, callers can no longer leave voice mail for the user at the SIP address that was removed even if the user is signed in with the SIP address assigned to the user in Communications Server or Lync Server.

如果您删除的主 SIP 地址,UM 不能将语音邮件发送到用户的邮箱和呼叫应答规则将不会处理。已删除的主 SIP 地址后,用户的 EUM 代理地址将列为用户的邮箱在 EAC 中,并在命令行管理程序中运行Get-mailbox cmdlet。此外, Get-ummailbox cmdlet 运行时,扩展电话号码_和_CallAnsweringRulesExtensions_参数将为空或 null。If you remove the primary SIP address, UM won't be able to send voice mail to the user's mailbox and call answering rules won't be processed. After the primary SIP address has been removed, the EUM proxy address for the user will be listed as Null on the user's mailbox in the EAC and when you run the Get-Mailbox cmdlet in the Shell. Also, when you run the Get-UMMailbox cmdlet, the _Extensions, PhoneNumber, and CallAnsweringRulesExtensions parameters will be blank or null.

您可以使用 EAC 或命令行管理程序删除主索引器还是辅助的 SIP 地址。您可以在 EAC 中的用户的邮箱上使用电子邮件地址页删除主索引器还是辅助的 SIP 地址。不能使用在 EAC 中的UM 邮箱页可删除主或第二的 SIP 地址。You can use the EAC or the Shell to remove a primary or a secondary SIP address. You can use the Email Address page on the user's mailbox in the EAC to remove a primary or a secondary SIP address. You can't use the UM Mailbox page in the EAC to remove a primary or secondary SIP address.

您可以通过在命令行管理程序中使用Get-ummailbox cmdlet 或Get-mailbox cmdlet 查看用户的主要和辅助 SIP 地址。You can view the primary and secondary SIP addresses for a user by using the Get-UMMailbox cmdlet or the Get-Mailbox cmdlet in the Shell.

有关与已启用语音邮件的用户相关的其他管理任务,请参阅声音已启用邮件的用户的过程For additional management tasks related to users who are enabled for voice mail, see Voice mail-enabled user procedures.

在开始之前,您需要知道什么?What do you need to know before you begin?

  • 估计完成时间:3 分钟。Estimated time to complete: 3 minutes.

  • 您需要执行此过程之前为其分配权限。若要查看所需的权限,请参阅Messaging Permissions主题中的"UM 邮箱"条目。You need to be assigned permissions before you can perform this procedure or procedures. To see what permissions you need, see the "UM mailboxes" entry in the Unified Messaging Permissions topic.

  • 在执行此过程之前,请先确认已创建 UM 邮箱策略。有关详细步骤,请参阅创建 UM 邮箱策略Before you perform this procedure, confirm that a UM mailbox policy has been created. For detailed steps, see Create a UM mailbox policy.

  • 在执行这些过程之前,请确认已启用 UM 并链接到 SIP URI 拨号计划的用户邮箱。有关详细步骤,请参阅启用语音邮件的用户Before you perform these procedures, confirm that the user's mailbox has been enabled for UM and linked to a SIP URI dial plan. For detailed steps, see Enable a user for voice mail.

  • 在执行这些过程之前,请确认已为用户配置了主 SIP 地址和辅助 SIP 地址。Before you perform these procedures, confirm that the primary and secondary SIP addresses are configured for the user.

  • 若要了解可能适用于此主题中过程的键盘快捷键,请参阅 Exchange 管理中心内的键盘快捷键For information about keyboard shortcuts that may apply to the procedures in this topic, see Keyboard shortcuts in the Exchange admin center.

提示

遇到问题了吗?请在 Exchange 论坛中寻求帮助。 请访问以下论坛:Exchange ServerExchange OnlineExchange Online Protection。.Having problems? Ask for help in the Exchange forums. Visit the forums at Exchange Server,Exchange Online, or Exchange Online Protection..

您想执行什么操作?What do you want to do?

使用 EAC 删除主 SIP 地址或辅助 SIP 地址Use the EAC to remove the primary or a secondary SIP address

  1. 在 EAC 中,导航到收件人 > 邮箱In the EAC, navigate to Recipients > Mailboxes.

  2. 在列表视图中,选择想要删除的 SIP 地址的邮箱,然后单击编辑编辑图标In the list view, select the mailbox from which you want to remove a SIP address, and then click EditEdit icon.

  3. 用户邮箱页上的电子邮件地址下,,选择您要从列表中删除的 SIP 地址,然后单击删除删除图标。加粗字母和数字中列出的主 EUM 代理地址或 SIP 地址。On the User Mailbox page, under Email address, select the SIP address that you want to remove from the list, and then click DeleteDelete icon. The primary EUM proxy address or SIP address is listed in bold letters and numbers.

  4. 键入所需的项目保留天数。Click Save.

使用命令行管理程序删除主 SIP 地址或辅助 SIP 地址Use the Shell to remove the primary or a secondary SIP address

此示例从启用了 UM 的用户 Tony Smith 的邮箱中删除 SIP 地址 tsmith@contoso.com。This example removes the SIP address tsmith@contoso.com from the mailbox of Tony Smith, a UM-enabled user.

备注

删除 SIP 地址使用命令行管理程序之前,您需要确定想要修改的 EUM 代理地址的位置。若要确定的位置,请使用 $mbx。EmailAddresses命令。在列表中的第一个 EUM 代理地址将为 0。Before you remove a SIP address using the Shell, you need to determine the position of the EUM proxy address that you want to modify. To determine the position, use the $mbx.EmailAddresses command. The first EUM proxy address in the list will be 0.

$mbx = Get-Mailbox tony.smith
$mbx.EmailAddresses.Item(1) -="eum:tsmith@contoso.com;phone-context=MyDialPlan.contoso.com"
Set-Mailbox tony.smith -EmailAddresses $mbx.EmailAddresses