Exchange 2013 电话顾问Telephony advisor for Exchange 2013

统一消息 (UM) 要求将 Microsoft Exchange 与组织的现有电话系统集成起来。要成功进行部署,您需要仔细分析现有电话基础结构,并执行正确的计划步骤来部署统一消息。Unified Messaging (UM) requires that you integrate Microsoft Exchange with the existing telephony system for your organization. A successful deployment requires you to make a careful analysis of your existing telephony infrastructure and to perform the correct planning steps to deploy Unified Messaging.

规划阶段可以是 exchange 管理员必须小或无体验的电话网络重大的挑战。为了解决此问题,请参阅下一节资源以帮助进行 UM 部署The planning phase can be a significant challenge to Exchange administrators who have little or no experience with a telephony network. To help address this challenge, see the following section Resources to help with your UM deployment.

本主题中的其他部分的统一消息涉及的受支持的 VoIP 网关,如何确定是否将 PBX 支持使用特定的 VoIP 网关模型或制造商,是否将 IP PBX 支持使用直接 SIP 连接,并且支持会话边界控制器 (Sbc) 的 Exchange Online UM。The other sections in this topic cover the supported VoIP gateways for Unified Messaging, how to determine whether your PBX is supported using a specific VoIP gateway model or manufacturer, whether your IP PBX is supported using a direct SIP connection, and supported session border controllers (SBCs) for Exchange Online UM.

有助于 UM 部署的资源Resources to help with your UM deployment

创建电话网络部署准则非常有挑战性。由于电话网络可以包括具有不同配置设置、固件和要求的 VoIP 网关、IP PBX 和 PBX,因此各个电话网络之间差异很大。不过,有几项资源可以帮助您成功部署统一消息:It's challenging to create guidelines for deploying telephony networks. They can be very different from one another because they can include VoIP gateways, IP PBXs, and PBXs with different configuration settings, firmware, and requirements. However, several resources are available to help you successfully deploy Unified Messaging:

在接洽统一消息专家之前,您应当能够回答他们将询问您的一些关键问题。知晓以下问题的答案有助于让您和 UM 专家之间的会话更有效率:Before you engage a Unified Messaging specialist, you should be able to answer key questions that they'll ask. Having the answers to the following questions will help make the conversation between you and the UM specialist productive:

  • 在您的组织中现在有多少使用电话或语音邮件(或二者都使用)的用户?How many existing telephone or voice mail users, or both, are in your organization?

  • 您计划向多少用户提供统一消息?How many users do you intend to provide with Unified Messaging?

  • 您打算使用哪个或哪些 PBX 实现与统一消息集成?Which PBX or PBXs do you intend to use for integration with Unified Messaging?

  • 您的组织有多少 PBX?说出供应商、类型(基于电路或 IP)、型号和固件版本。How many PBXs does your organization have? Specify the vendors, types (circuit- or IP-based), models, and firmware versions.

  • PBX 网络是否联网,它们是集中的,还是位于多个位置?Are the PBXs networked, and are they centralized or located in multiple locations?

  • 您的组织当前使用什么语音邮件系统?说出供应商、类型、型号和固件版本。What voice mail system or systems does your organization currently use? Specify the vendors, types, models, and firmware versions.

  • 语音邮件系统是如何集成到您的 PBX 中的(模拟、T1/E1、PRI、数字组仿真、VoIP、其他)?How are the voice mail systems integrated into your PBXs (Analog, T1/E1, PRI, Digital set emulation, VoIP, other)?

  • 您当前正在使用语音网络吗?Are you currently using voice networking?

  • 您的组织使用哪种类型的传真系统或系统,并不传真系统支持入站的传真路由到 Exchange?What type of fax system or systems does your organization use, and does the fax system or systems support inbound fax routing to Exchange?

  • 您的组织是否使用自动助理?Does your organization use automated attendants?

  • 您是否需要为仅使用电话的用户(即不能访问电子邮件的用户)提供支持?Do you need support for phone-only users, that is, users who won't have email access?

支持的 VoIP 网关Supported VoIP gateways

将统一消息与 PBX 集成需要使用一个或多个 VoIP 网关,以便将基于 TDM 的 PBX 所使用的电路交换协议转换成统一消息所使用的基于 IP 的数据包交换协议。VoIP 网关供应商提供的几种型号的 VoIP 网关和媒体网关已通过测试,支持统一消息。Integrating Unified Messaging with PBXs requires you to use one or more VoIP gateways to translate the circuit-switched protocols that are used by TDM-based PBXs to IP-based, packet-switched protocols that are used by Unified Messaging. VoIP gateway vendors with several models of VoIP and media gateways have been tested and are supported for Unified Messaging.

与 Microsoft 统一通信开放互操作性计划现在集成的统一消息与 VoIP 网关、 IP Pbx 和 Sbc 的互操作性测试。有关详细信息,请参阅Microsoft 统一通信开放互操作性计划Interoperability testing of Unified Messaging with VoIP gateways, IP PBXs, and SBCs is now integrated with the Microsoft Unified Communications Open Interoperability Program. For more information, see Microsoft Unified Communications Open Interoperability Program.

VoIP 网关、 IP Pbx 和高级的 VoIP 网关的Microsoft 统一通信开放互操作性计划限定程序确保客户可以无缝的安装程序和支持体验时他们正在使用限定电话 VoIP 网关和 IP Pbx 与 Microsoft 统一通信软件。只有满足严格和全面测试要求符合规范和测试计划的产品接收限定。The Microsoft Unified Communications Open Interoperability Program qualification program for VoIP gateways, IP PBXs, and advanced VoIP gateways ensures that customers have a seamless setup and support experience when they're using qualified telephony VoIP gateways and IP PBXs with Microsoft Unified Communications software. Only products that meet rigorous and extensive testing requirements and conform to the specifications and test plans receive qualification.

关于配置支持的 VoIP 网关、IP PBX、PBX 和 SBC 的详细信息,请参阅下列资源之一:For details about configuring supported VoIP gateways, IP PBXs, PBXs, and SBCs, see one of the following resources:

以下 VoIP 网关供应商经过了互操作性验证:Interoperability was verified for the following VoIP gateway vendors:

  • AudioCodesAudioCodes

  • DialogicDialogic

  • 下表列出了 VoIP 网关供应商、VoIP 网关型号和每种型号所支持的协议。The following table shows the VoIP gateway vendor, the VoIP gateway model, and the protocols that are supported by each model.

支持的统一消息 VoIP 网关Supported VoIP gateways for Unified Messaging

供应商Vendor 模型Model 受支持的协议Supported protocols
AudioCodesAudioCodes
MediaPack 114/8 FXOMediaPack 114/8 FXO
与带内 DTMF 模拟Analog with In-Band DTMF
与 SMDI 模拟Analog with SMDI
AudioCodesAudioCodes
Mediant 1000Mediant 1000
与带内 DTMF 模拟Analog with In-Band DTMF
与 SMDI 模拟Analog with SMDI
BRI Q.SIGBRI Q.SIG
T1/E1 Q.SIGT1/E1 Q.SIG
IP 到 IPIP-to-IP
AudioCodesAudioCodes
Mediant 2000Mediant 2000
T1/E1 CAST1/E1 CAS
T1/E1 Q.SIGT1/E1 Q.SIG
IP 到 IPIP-to-IP
DialogicDialogic
DMG1000PBXDNIWDMG1000PBXDNIW
数字组仿真Digital Set Emulation
DialogicDialogic
DMG1000LSWDMG1000LSW
与带内 DTMF 模拟Analog with In-Band DTMF
与 SMDI 模拟Analog with SMDI
DialogicDialogic
DMG2000DMG2000
T1 CAST1 CAS
T1/E1 Q.SIGT1/E1 Q.SIG
DialogicDialogic
DMG3000DMG3000
BRI Q.SIGBRI Q.SIG
NETNET
VX1200VX1200
T1 Q.SIGT1 Q.SIG
SonusSonus
SBC 1000/2000 2.2.1 或更高版本SBC 1000/2000 2.2.1 or later
TDM 信号 (ISDN): 在&T 4ESS/5ESS,于 DMS 100,欧元 ISDN (ETSI 300 102)、 QSIG,NTT InsNet (日本)、 ANSI 国家/地区的 ISDN-2 (NI-2)TDM Signaling (ISDN): AT&T 4ESS/5ESS, Nortel DMS- 100, Euro ISDN (ETSI 300-102), QSIG, NTT InsNet (Japan), ANSI National ISDN-2 (NI-2)
TDM 信号 (CAS): T1 CA (E&M、 循环开始);E1 CA (R2)TDM Signaling (CAS): T1 CAS (E&M, Loop start); E1 CAS (R2)
QuintumQuintum
Tenor DX 系列Tenor DX Series
T1 Q.SIGT1 Q.SIG

使用 AudioCodes VoIP 网关时支持的 PBXSupported PBXs when using an AudioCodes VoIP gateway

下表列出了使用 AudioCodes VoIP 网关(包括 MediaPack-114 FXO、MediaPack-118 FXO 和 Mediant 2000)时所支持的 PBX。The following table shows the PBXs that are supported using AudioCodes VoIP gateways, including MediaPack-114 FXO, MediaPack-118 FXO, and Mediant 2000.

AudioCodes VoIP 网关支持的 PBXPBXs supported with an AudioCodes VoIP gateway

PBX 制造商PBX manufacturer PBX 型号/类型PBX model/type AudioCodes 模型"x"的替换 4 或 8 每需要"y"-替换 1、 2、 4、 8 或需要每 16AudioCodes model "x" - replace with 4 or 8 per need "y" - replace with 1, 2, 4, 8 or 16 per need
AlcatelAlcatel
OmniPCX 4400OmniPCX 4400
MediaPack 11x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
Mediant2000/ySpans/SIPMediant2000/ySpans/SIP
AastraAastra
M1000, M2000M1000, M2000
Mediant2000/ySpans/SIPMediant2000/ySpans/SIP
AvayaAvaya
Definity G3Definity G3
MediaPack 11x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
Mediant1000/ySpans/SIPMediant1000/ySpans/SIP
Mediant2000/ySpans/SIPMediant2000/ySpans/SIP
AvayaAvaya
Magix/MerlinMagix/Merlin
MediaPack 11x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
AvayaAvaya
S8300S8300
MediaPack 11x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
Mediant1000/ySpans/SIPMediant1000/ySpans/SIP
Mediant2000/ySpans/SIPMediant2000/ySpans/SIP
AvayaAvaya
S8700S8700
MediaPack 11x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
Mediant1000/ySpans/SIPMediant1000/ySpans/SIP
Mediant2000/ySpans/SIPMediant2000/ySpans/SIP
AvayaAvaya
IP OfficeIP Office
MediaPack 11x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
Mediant2000/ySpans/SIPMediant2000/ySpans/SIP
CiscoCisco
CallManager 4.xCallManager 4.x
Mediant1000/IP 到 IPMediant1000/IP-to-IP
Mediant2000/IP 到 IPMediant2000/IP-to-IP
NECNEC
Electra EliteElectra Elite
MediaPack 11x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
NECNEC
NEAX2400NEAX2400
MediaPack 11x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
Mediant2000/ySpans/SIP/RS232Mediant2000/ySpans/SIP/RS232
NeXspanNeXspan
SS
MediaPack 11x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
NortelNortel
Communication Server-1000M、1000S、1000ECommunication Server-1000M, 1000S, 1000E
Mediant1000/ySpans/SIPMediant1000/ySpans/SIP
Mediant2000/ySpans/SIPMediant2000/ySpans/SIP
NortelNortel
Meridian 11c、51c、61c、81cMeridian 11c, 51c, 61c, 81c
Mediant1000/ySpans/SIPMediant1000/ySpans/SIP
Mediant2000/ySpans/SIPMediant2000/ySpans/SIP
PanasonicPanasonic
KX-TES824、KX-TEA308KX-TES824, KX-TEA308
MediaPack 11x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
PanasonicPanasonic
KX-TDA30、KX-TDA100、KX-TDA200、KX-TDA600KX-TDA30, KX-TDA100, KX-TDA200, KX-TDA600
MediaPack 11x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
ShortelShortel
IP 电话系统IP Telephony System
MediaPack 11x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
SiemensSiemens
HiCom 150EHiCom 150E
MediaPack 11x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
SiemensSiemens
HiPath 3550HiPath 3550
MediaPack 11x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
SiemensSiemens
HiPath 4000HiPath 4000
MediaPack 11x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
Mediant1000/ySpans/SIPMediant1000/ySpans/SIP
Mediant2000/ySpans/SIPMediant2000/ySpans/SIP
Tadiran TelecomTadiran Telecom
Coral Flexicom、Coral IPXCoral Flexicom, Coral IPX
MediaPack 11x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
Mediant1000/ySpans/SIPMediant1000/ySpans/SIP
Mediant2000/ySpans/SIPMediant2000/ySpans/SIP

使用 Dialogic VoIP 网关时支持的 PBXSupported PBXs when using a Dialogic VoIP gateway

每个 Dialogic VoIP 网关模型支持不同的 PBX。下表显示了 PBX 制造商和型号,以及可以使用的 Dialogic VoIP 网关。每个 VoIP 网关使用不同的信号方法、密度和协议。Each Dialogic VoIP gateway model supports different PBXs. The following tables show the PBX manufacturer and model and which Dialogic VoIP gateway can be used. Each VoIP gateway uses different signaling methods, densities, and protocols.

使用 DMG1000 系列媒体网关时支持的 PBXPBXs supported when using a DMG1000 series Media Gateway

下表显示了使用低密度对话媒体网关 (DMG1000) 时所支持的 PBX。但是,使用模拟 DMG1000 时,必须使用补充信号(RS232 SMDI、MD110、MCI 协议或带内 DTMF 信号)。The following table shows the PBXs that are supported with the low-density Dialogic Media Gateway (DMG1000). However, when an analog DMG1000 is used, supplemental signaling (RS232 SMDI, MD110, MCI protocols, or Inband DTMF signaling) is required.

使用低密度对话 DMG1000 系列 VoIP 网关时支持的 PBXPBXs supported when using a low-density Dialogic DMG1000 series VoIP gateway

PBX 制造商PBX manufacturer PBX 型号/类型PBX model/type DMG 型号和附加信号DMG model and additional signaling
AastraAastra
Aastra MD110(以前为 Ericsson MD110)Aastra MD110 (formerly Ericsson MD110)
DMG1008LSWDMG1008LSW
使用 MD110 RS232 协议的模拟连接Analog connectivity using the MD110 RS232 protocol
AlcatelAlcatel
Omni PCX 4400Omni PCX 4400
DMG1008LSWDMG1008LSW
AvayaAvaya
Definity G3 S8100、S8300、S8700 和 S8710(Communications Mgr SW V2.0 或更高版本)Definity G3 S8100, S8300, S8700, and S8710 (Communications Mgr SW V2.0 or later versions)
DMG1008DNIWDMG1008DNIW
IntercomIntercom

DMG1008LSWDMG1008LSW
使用 SMDI 串行协议的模拟连接Analog connectivity using SMDI serial protocol
MitelMitel
SX-200D、X-200 Light、SX-2000 Light、SX-2000 S、SX-2000 VS、SX-200 ICPSX-200D, SX-200 Light, SX-2000 Light, SX-2000 S, SX-2000 VS, SX-200 ICP
DMG1008MTLDNIWDMG1008MTLDNIW
NECNEC
2000, 2400, 2400 IPX2000, 2400, 2400 IPX
DMG1008DNIWDMG1008DNIW
NortelNortel
Meridian 1 - 选项 11、21、21A、51、61、71 和 81Meridian 1 - Option 11, 21, 21A, 51, 61, 71, and 81
Meridian SL1 - 常规 X11,15 版或更高版本Meridian SL1 - Generic X11, Release 15 or later versions
Nortel Communication Server - 带 V3.0 或更高版本的 1000M、1000S、1000ENortel Communication Server - 1000M, 1000S, 1000E with V3.0 or later versions
DMG1008DNIWDMG1008DNIW
NortelNortel
SL 100SL 100
DMG1008LSWDMG1008LSW
使用 SMDI 串行协议的模拟连接Analog connectivity using SMDI serial protocol
SiemensSiemens
HiCom 300E CSHiCom 300E CS
DMG1008DNIWDMG1008DNIW
SiemensSiemens
HiCom 300E(欧洲)HiCom 300E (European)
DMG1008LSWDMG1008LSW
使用带内 DTMF 信号的模拟连接Analog connectivity using Inband DTMF signaling
Siemens/ROLMSiemens/ROLM
8000 (软件版本 80003 或更高版本) 9000 (所有版本)8000 (SW release 80003 or later versions) 9000 (All versions)
9751(SW 发布版 9005 的所有版本)9751 (All versions of SW release 9005)
9751(SW 9006.4 版或更高版本)9751 (SW release 9006.4 or later versions)
DMG1008RLMDNIWDMG1008RLMDNIW
SiemensSiemens
HiPath 4000HiPath 4000
DMG1008LSWDMG1008LSW
ToshibaToshiba
CTX(SW 版本 AR1ME021.00)CTX (SW version AR1ME021.00)
DMG1008LSWDMG1008LSW
其他Others
各种Various
DMG1008LSWDMG1008LSW
使用带内 DTMF 或 SMDI 的模拟连接Analog connectivity using either Inband DTMF or SMDI

使用 DMG 2000 系列媒体网关时支持的 PBXPBXs supported when using a DMG 2000 series Media Gateway

下表显示了 T1/E1 Dialogic 媒体网关 (DMG2000) 所支持的 PBX。DMG2000 网关,它提供单跨段 (DMG2030DTIQ)、双跨段 (DMG2060DTIQ) 或四跨段 (DMG2120DTIQ) 密度,支持以下协议:The following table shows the PBXs that are supported with the T1/E1 Dialogic Media Gateway (DMG2000). The DMG2000 gateway, which comes in single span (DMG2030DTIQ), dual span (DMG2060DTIQ), or quad span (DMG2120DTIQ) densities, supports the following protocols:

  • T1 CAST1 CAS

  • T1 Q.SIGT1 Q.SIG

  • E1 Q.SIGE1 Q.SIG

  • T1 NI-2T1 NI-2

  • T1 5ESST1 5ESS

  • T1 DMS100T1 DMS100

如果使用通道关联信号 (CAS) 信号方式,则补充信号(RS232 SMDI、MD110、MCI 协议或带内 DTMF 信号)是必需的。如果使用 Q.SIG 信号,则 PBX 必须支持与呼叫和被呼叫方信息关联的补充服务,并且支持统一消息需要的呼叫转移能力。If Channel Associated Signaling (CAS) signaling is used, supplemental signaling (RS232 SMDI, MD110, MCI protocols, or Inband DTMF signaling) is required. If Q.SIG signaling is used, the PBX must support the supplemental services that are associated with calling and called party information and the call transfer capabilities required by Unified Messaging.

使用 DMG2000 媒体网关时所支持的 PBXPBXs supported with the DMG2000 Media Gateway

PBX 制造商PBX manufacturer PBX 型号/类型PBX model/type 所需的软件版本Required software version 协议和附加信号Protocol and additional signaling
AlcatelAlcatel
Omni PCX 4400Omni PCX 4400
版本 3.2.712.5Version 3.2.712.5
T1 Q.SIGT1 Q.SIG
E1 Q.SIGE1 Q.SIG
AvayaAvaya
Definity G3Definity G3
版本 3 或更高版本Version 3 or later
T1 CAST1 CAS
AvayaAvaya
S8500S8500
Manager SW V2.0 或更高版本Manager SW V2.0 or later versions
T1 CAST1 CAS
T1 Q.SIGT1 Q.SIG
E1 Q.SIGE1 Q.SIG
EricssonEricsson
MD110MD110
Release MX1 TSW R2A (BC13)Release MX1 TSW R2A (BC13)
E1 Q.SIGE1 Q.SIG
IntercomIntercom


CAS(w/SMDI 串行协议)CAS (w/ SMDI serial protocol)
NECNEC
2400 IMX2400 IMX
5200 Dec. 92 1b 版或更高版本Release 5200 Dec. 92 1b or later versions
CAS(w/MCI 串行协议)CAS (w/ MCI serial protocol)
NECNEC
2400 IPX2400 IPX
R17 发布版 03.46.001R17 Release 03.46.001
T1 Q.SIGT1 Q.SIG
NortelNortel
Meridian 1 - 选项 11Meridian 1 - Option 11
15 版或更高版本,需要选项 19 和 46Release 15 or later versions, and options 19 and 46 are required
T1 Q.SIGT1 Q.SIG
E1 Q.SIGE1 Q.SIG
NortelNortel
Communication Server 1000Communication Server 1000
版本 2121,发布版 4Version 2121, Release 4
T1 Q.SIGT1 Q.SIG
E1 Q.SIGE1 Q.SIG
SiemensSiemens
HiCom 300E CSHiCom 300E CS
发布版 9006.4 或更高版本(注意:仅北美软件负载)Release 9006.4 or later (Note: North American software load only)
T1 CAST1 CAS
SiemensSiemens
HiPath 4000HiPath 4000
V2 SMR 9 SMPOV2 SMR 9 SMPO
T1 Q.SIGT1 Q.SIG
E1 Q.SIGE1 Q.SIG
MitelMitel
SX-2000 S、SX-2000 VSSX-2000 S, SX-2000 VS
LW 34LW 34
T1 Q.SIGT1 Q.SIG
E1 Q.SIGE1 Q.SIG
MitelMitel
33003300
5.1.4.8 版Version 5.1.4.8
T1 Q.SIGT1 Q.SIG
E1 Q.SIGE1 Q.SIG

使用 DMG4008BRI 系列媒体网关时支持的 PBXPBXs supported when using a DMG4008BRI series Media Gateway

随 DMG4000 系列媒体网关一起提供了一些 TDM 界面选项。DMG4008BRI 支持 4 端口/8 通道密度,并支持以下协议:The DMG4000 series Media Gateway comes with several TDM interface options. The DMG4008BRI supports 4-port/8-channel densities and supports the following protocols:

  • ISDN BRI Q.SIGISDN BRI Q.SIG

  • ETSI-DSS1 (Euro ISDN)ETSI-DSS1 (Euro ISDN)

  • NET 3(比利时)NET 3 (Belgium)

  • VN3(法国)VN3 (France)

  • 1TR6(德国)1TR6 (Germany)

  • INS-64(日本)INS-64 (Japan)

  • 5ESS 自定义 (北美-在&T)5ESS Custom (North America - AT&T)

  • National ISDN(NI1 - 北美)National ISDN (NI1 - North America)

下表显示了使用 Dialogic 4000 媒体网关系列 (DMG4008) 时所支持的 PBX。The following table shows the PBXs that are supported using a Dialogic 4000 Media Gateway Series (DMG4008).

使用 DMG4008BRI 媒体网关支持的 PBXPBXs supported using a DMG4008BRI Media Gateway

PBX 制造商PBX manufacturer PBX 型号/类型PBX model/type 所需的软件版本Required software version 协议和附加信号Protocol and additional signaling
SiemensSiemens
HiCom 300HiCom 300
SA300 V3.05SA300-V3.05
BRI-Q.SIG (ECMAV2)BRI-Q.SIG (ECMAV2)
SiemensSiemens
HiPath 4000HiPath 4000
S.0 B4400S.0 B4400
BRI-Q.SIG (ECMAV2)BRI-Q.SIG (ECMAV2)

受支持的 IP PBXSupported IP PBXs

统一消息还支持 IP PBX。下表显示了使用与统一消息的直接 SIP 连接时所支持的 IP PBX。IP PBXs are also supported by Unified Messaging. The following table shows the IP PBXs that are supported using a direct SIP connection to Unified Messaging.

使用直接 SIP 连接时支持的 IP PBXIP PBXs supported when using a direct SIP connection

PBX 制造商PBX manufacturer PBX 型号/类型PBX model/type 所需的软件版本Required software version
AastraAastra
MX-ONEMX-ONE
4.04.0
AvayaAvaya
AuraAura
带 Service Pack 5 (SP5) 的 5.2.15.2.1 with Service Pack 5 (SP5)
AvayaAvaya
Communication Server 2100Communication Server 2100
CS2100 SE13CS2100 SE13
CiscoCisco
Call Manager、Unified Communications ManagerCall Manager, Unified Communications Manager
5.1,6.x,7.0 and8.05.1, 6.x, 7.0 and8.0

使用 SIP 媒体网关时支持的 IP PBXIP PBXs supported when using SIP media gateways

统一消息也支持使用 SIP 媒体网关的 IP PBX。下表显示了使用 SIP 媒体网关的 IP 到 IP 功能连接到统一消息所支持的 IP PBX。IP PBXs using SIP media gateways are also supported by Unified Messaging. The following table shows the IP PBXs that are supported using IP to IP capabilities of SIP media gateways to connect to Unified Messaging.

使用 SIP 媒体网关时支持的 IP PBXIP PBXs supported when using a SIP media gateway

PBX 制造商PBX manufacturer PBX 型号/类型PBX model/type SIP 网关型号SIP gateway model
CiscoCisco
Call Manager 4.xCall Manager 4.x
AudioCodes Mediant 1000/2000(已启用 IP 到 IP 协议)AudioCodes Mediant 1000/2000 (IP-to-IP enabled)

Exchange 统一消息、Office Communications Server 2007 R2 和 Microsoft Lync ServerExchange Unified Messaging, Office Communications Server 2007 R2, and Microsoft Lync Server

内部部署和混合部署,Exchange 统一消息可以与 Microsoft Office Communications Server 2007 R2,Microsoft Lync Server 2010 一起部署或 Lync Server 2013 以提供语音消息、 即时消息 (IM)、 增强用户状态、 音频 / 视频会议和集成的电子邮件和消息在组织中的用户体验。有关详细信息,请参阅:For on-premises and hybrid deployments, Exchange Unified Messaging can be deployed together with Microsoft Office Communications Server 2007 R2, Microsoft Lync Server 2010 or Lync Server 2013 to provide voice messaging, Instant Messaging (IM), enhanced user presence, audio-video conferencing, and an integrated email and messaging experience for users in your organization. For more information, see:

若要了解有关 Microsoft 统一通信开放互操作性计划企业电话基础结构,包括查找合格 SIP PSTN 网关和 IP Pbx 以及过程的电话基础结构供应商加入和加入计划,请参阅Microsoft 统一通信开放互操作性计划To find out more about the Microsoft Unified Communications Open Interoperability Program for enterprise telephony infrastructure, including finding qualified SIP PSTN gateways and IP PBXs and the process for telephony infrastructure vendors to join and participate in the program, see Microsoft Unified Communications Open Interoperability Program.