在 Lync Server 2013 中配置 CAC 的网络站点Configure network sites for CAC in Lync Server 2013

 

上次修改的主题: 2012-09-05Topic Last Modified: 2012-09-05

重要

如果您已为 E9-1-1 或媒体旁路创建网络站点,则可以使用 Set-CsNetworkSite cmdlet 修改现有的网络站点,以应用带宽策略配置文件。If you have already created network sites for E9-1-1 or media bypass, you can modify the existing network sites to apply a bandwidth policy profile by using the Set-CsNetworkSite cmdlet. 有关如何修改网络站点的示例,请参阅 在 Lync Server 2013 中创建或修改网络站点For an example of how to modify a network site, see Create or modify a network site in Lync Server 2013.

网络站点是指部署了呼叫允许控制 (CAC)、E9-1-1 和媒体旁路的每个网络区域内的办公室或位置。使用以下过程创建网络站点,这些网络站点与 CAC 的示例网络拓扑中的网络站点一致。这些过程显示如何创建并配置受 WAN 带宽限制,并因此需要用于限制实时音频或视频流量的带宽策略的网络站点。Network sites are the offices or locations within each network region of call admission control (CAC), E9-1-1, and media bypass deployments. Use the following procedures to create network sites that align to network sites in the example network topology for CAC. These procedures show how to create and configure network sites that are constrained by WAN bandwidth and therefore require bandwidth policies that limit real-time audio or video traffic flow.

在示例 CAC 部署中,北美区域有六个站点。In the example CAC deployment, the North America region has six sites. 其中三个站点受 WAN 带宽限制:里诺、波特兰和阿尔布开克。Three of these sites are constrained by WAN bandwidth: Reno, Portland, and Albuquerque. 其他三个站点受 WAN 带宽限制:纽约、芝加哥和底特律。The other three sites, which are not constrained by WAN bandwidth: New York, Chicago, and Detroit. 有关如何创建或修改其他网络站点的示例,请参阅 在 Lync Server 2013 中创建或修改网络站点For an example of how to create or modify those other network sites, see Create or modify a network site in Lync Server 2013.

若要查看示例网络拓扑,请参阅规划文档中的 示例:在 Lync Server 2013 中收集呼叫允许控制的要求To view the example network topology, see Example: Gathering your requirements for call admission control in Lync Server 2013 in the Planning documentation.

备注

在下面的过程中,将使用 Lync Server 命令行管理程序创建网络站点。In the following procedure, Lync Server Management Shell is used to create a network site. 有关使用 Lync Server 控制面板创建网络站点的详细信息,请参阅 在 Lync server 2013 中创建或修改网络站点For details about using Lync Server Control Panel to create a network site, see Create or modify a network site in Lync Server 2013.

为呼叫允许控制创建网络站点To create network sites for call admission control

  1. 启动 Lync Server 命令行管理程序:依次单击“开始”****、“所有程序”****、“Microsoft Lync Server 2013”**** 和“Lync Server 命令行管理程序”****。Start the Lync Server Management Shell: Click Start, click All Programs, click Microsoft Lync Server 2013, and then click Lync Server Management Shell.

  2. 运行 New-CsNetworkSite cmdlet 以创建网络站点并将相应带宽策略配置文件应用到每个站点。Run the New-CsNetworkSite cmdlet to create network sites and apply an appropriate bandwidth policy profile to each site. 例如,运行:For example, run:

     New-CsNetworkSite -NetworkSiteID Reno -Description "NA:Branch office for sales force" -NetworkRegionID NorthAmerica -BWPolicyProfileID 10MB_Link
    
     New-CsNetworkSite -NetworkSiteID Portland -Description "NA:Branch office for marketing force" -NetworkRegionID NorthAmerica -BWPolicyProfileID 5MB_Link
    
     New-CsNetworkSite -NetworkSiteID Albuquerque -Description "NA:Branch office for SouthWest sales" -NetworkRegionID EMEA -BWPolicyProfileID 10MB_Link
    
  3. 要为整个示例拓扑完成网络站点的创建,请针对 EMEA 和 APAC 区域中受带宽限制的网络站点重复步骤 2。To finish creating network sites for the entire example topology, repeat step 2 for the bandwidth-constrained network sites in the EMEA and APAC regions.