在 Lync Server 2013 的拓扑生成器中定义其他中继Define additional trunks in Topology Builder in Lync Server 2013

 

上次修改的主题: 2012-10-04Topic Last Modified: 2012-10-04

按照以下步骤使用拓扑生成器定义可将 对等方 与中介服务器关联的其他中继。Follow these steps to use Topology Builder to define an additional trunk to which you can associate a peer with a Mediation Server. 对等方为启用企业语音的用户提供了与公共交换电话网络 (PSTN) 的连接。A peer provides users enabled for Enterprise Voice with connectivity to the public switched telephone network (PSTN). 对等方可以是用于 Internet 电话服务提供商电话服务提供商 (ITSP) 的 PSTN 网关、IP-PBX 或会话边界控制器 (SBC)。A peer can be a PSTN gateway, an IP-PBX, or a Session Border Controller (SBC) for an Internet Telephony Service Provider (ITSP). 中继定义中介服务器与对等方之间的连接。The trunk defines this connection between the Mediation Server and peer. 可以为每个中介服务器定义多个中继。Multiple trunks can be defined per Mediation Server. 中介服务器可以与多个对等方相关联。A Mediation Server can be associated with multiple peers.

中继是中介服务器和元组唯一标识的网关之间的逻辑连接:A trunk is a logical connection between a Mediation Server and a gateway uniquely identified by the tuple:

{中介服务器 FQDN、中介服务器侦听端口 (TLS 或 TCP) :网关 IP 和 FQDN,网关侦听端口}{Mediation Server FQDN, Mediation Server listening port (TLS or TCP) : gateway IP and FQDN, gateway listening port}

备注

本主题假定您已使用至少一个并置或独立中介服务器或池设置了 PSTN 网关和根中继,如在部署文档中的 "在 拓扑生成器中定义一个网关 " 中所述,在 "Lync server 2013" 中定义一个网关。This topic assumes that you have setup a PSTN gateway and root trunk with at least one collocated or stand-alone Mediation Server or pool as described in Define a gateway in Topology Builder in Lync Server 2013 in the Deployment documentation.

备注

本主题假定您已至少在一个中心站点中设置了一个前端池或 Standard Edition 服务器,如在 Lync server 2013 中定义和配置前端池或 Standard edition server 以及部署文档中的 "在 lync Server 2013 中发布拓扑" 中所述。This topic assumes that you have set up at least one Front End pool or Standard Edition server in at least one central site, as described in Define and configure a Front End pool or Standard Edition server in Lync Server 2013 and Publish the topology in Lync Server 2013 in the Deployment documentation.

在中介服务器和网关对等方之间定义其他中继To Define an additional Trunk between a Mediation Server and a Gateway Peer

  1. 启动拓扑生成器:依次单击 " 开始"、" 所有程序"、" Microsoft Lync server 2013",然后单击 " Lync server 拓扑生成器"。Start Topology Builder: Click Start, click All Programs, click Microsoft Lync Server 2013, and then click Lync Server Topology Builder.

  2. 在 "Lync Server 2013" 下,右键单击 " 共享组件",右键单击 " 中继 " 节点,然后单击 " 新建中继"。Under Lync Server 2013, your site name, Shared Components, right-click the Trunks node, and then click New Trunk.

    Lync Server 拓扑生成器文件结构屏幕Lync Server Topology Builder file structure screen

  3. 在“定义新的 Trunk”**** 中,指定唯一标识中继的友好名称。In Define New Trunk, specify a friendly name to uniquely identify the trunk. 您不得有两个具有相同名称的中继。You cannot have two trunks with the same name.

    备注

    如果指定传输层安全性 (TLS) 作为传输类型,则必须指定 FQDN,而不是中介服务器的对等方的 IP 地址。If you specify Transport Layer Security (TLS) as the transport type, you must specify the FQDN instead of the IP address of the peer of the Mediation Server.

  4. 在“关联的 PSTN 网关”**** 下,选择 PSTN 对等网关以与此中继相关联。Under Associated PSTN gateway, select the PSTN gateway peer to associate with this trunk.

    用于中继的 PSTN 网关对等的属性设置Property settings for PSTN gateway peer for trunk

  5. 在 " 用于 PSTN 网关的侦听端口" 下,键入对等 (PSTN 网关、IP-PBX 或 SBC) 将从即将与此中继关联的中介服务器接收 SIP 消息的侦听端口。Under Listening Port for PSTN gateway, type the listening port that the peer (PSTN gateway, IP-PBX, or SBC) will receive SIP messages from the Mediation Server that is to be associated with this trunk. 对于传输控制协议 (TCP) 来说,默认对等端口为 5066,对于传输层安全性 (TLS),默认端口为 5067。The default peer ports are 5066 for Transmission Control Protocol (TCP) and 5067 for Transport Layer Security (TLS). 默认的 Survivable 分支装置端口是用于 TLS 的 TCP 和5082的5081。The default Survivable Branch Appliance ports are 5081 for TCP and 5082 for TLS.

  6. 在“SIP 传输协议”**** 下,单击对等方使用的传输类型。Under SIP Transport Protocol, click the transport type that the peer uses.

    备注

    出于安全考虑,强烈建议您将对等部署到可以使用 TLS 的中介服务器。For security reasons, we strongly recommend that you deploy a peer to the Mediation Server that can use TLS.

  7. 在 " 关联的中介服务器" 下,选择要与此对等方的根中继相关联的中介服务器池Under Associated Mediation Server, select the Mediation Server pool to associate with the root trunk of this peer

  8. 在 " 关联的中介服务器端口" 下,键入中介服务器将从对等方接收 SIP 消息的侦听端口。Under Associated Mediation Server port, type the listening port that the Mediation Server will receive SIP messages from the peer.

    备注

    在 Lync Server 2013 中有多个中继支持,不能为具有不同中继名称的两个中继配置IP/PSTN 网关的相同关联中介服务器端口和侦听端口With multiple trunk support in Lync Server 2013, two trunks with different trunk names cannot be configured with the same Associated Mediation Server port and Listening Port for IP/PSTN gateway

    备注

    在 Lync Server 2013 中有多个中继支持,可以在中介服务器上定义多个 SIP 信号端口,以便与多个对等方通信。With multiple trunk support in Lync Server 2013, multiple SIP signaling ports can be defined on the Mediation Server for communication with multiple peers. 在定义中继时, 关联的中介服务器端口 号必须位于中介服务器允许的各个协议的侦听端口范围内。When defining a trunk, the Associated Mediation Server port number must be within the range of the listening ports for the respective protocol allowed by the Mediation Server. 此端口范围在 "Lync Server 2013" 和 "中介服务器池" 中定义。This port range is defined under Lync Server 2013 and Mediation Server pools. 右键单击相关中介服务器池,然后选择 " 编辑属性"。Right-click the relevant Mediation Server pool, and select Edit Properties. 在“侦听端口”字段中指定端口范围。Specify the port range in the Listening ports field.

  9. 单击“确定”****。Click OK.