验证试点池与旧池的共存情况Verify pilot pool coexistence with legacy pool

 

上次修改的主题: 2012-09-29Topic Last Modified: 2012-09-29

部署试点池之后,需要使用管理工具查看池信息来验证两个池是否共存。After you deploy the pilot pool, you need to verify the coexistence of the two pools by using the administrative tools to view the pool information. 对于 Lync Server 2013 池和旧版池,必须使用 Lync Server 2013 控制面板和拓扑生成器工具。For the Lync Server 2013 pools and legacy pools, you must use the Lync Server 2013 Control Panel and Topology Builder tools.

验证 Lync Server 2013 服务是否已启动Verify that Lync Server 2013 services have started

  1. 在 Lync Server 2013 前端服务器中,导航到 "管理工具 \ 服务" 小程序。From the Lync Server 2013 Front End Server, navigate to the Administrative Tools\Services applet.

  2. 确认以下服务正在前端服务器上运行:Verify that the following services are running on the Front End Server:

Lync Server 2013 服务Lync Server 2013 services

已启动 Lync Server 服务的列表List of Lync Server Services Started

打开 "Lync Server 2013 控制面板"Open the Lync Server 2013 Control Panel

在 Lync Server 2013 部署的前端服务器中,打开 Lync Server 2013 控制面板并选择 Lync Server 2010 池。From the Front End Server in your Lync Server 2013 deployment, open the Lync Server 2013 Control Panel and select the Lync Server 2010 pool. 重复此过程以打开 Lync Server 2013 池。Repeat the procedure to open the Lync Server 2013 pool.

打开 Lync Server 2013 控制面板Open Lync Server 2013 Control Panel

!["选择 URL" 对话框](images/JJ205420.b1f8e650-9c3c-4563-a403-5069f198342f(OCS.15).png ""选择 URL" 对话框")Select URL dialog box

重要

在 Lync Server 2013 上,您必须先将 Silverlight 升级到 Silverlight 版本5,然后再使用 Lync Server 控制面板。On Lync Server 2013, you must upgrade Silverlight to Silverlight version 5 prior to using the Lync Server Control Panel.

此拓扑现在包括 Lync Server 2010 和 Lync Server 2013 服务器角色。This topology now includes Lync Server 2010 and Lync Server 2013 server roles.

“Lync Server 2013 控制面板拓扑”页Lync Server 2013 Control Panel Topology page

Lync Server 控制面板-拓扑页面Lync Server Control Panel - Topology page

请勿尝试在 Lync Server 2010 拓扑生成器中打开拓扑Don’t attempt to open the topology in Lync Server 2010 Topology Builder

如果尝试使用 Lync Server 2010 拓扑生成器打开拓扑,将会遇到以下错误。If you attempt to open the topology using Lync Server 2010 Topology Builder, you will encounter the error below. 仅可使用 Lync Server 2013 拓扑生成器查看拓扑。The topology can only be viewed using Lync Server 2013 Topology Builder. Lync Server 2013 拓扑生成器必须用于为 Lync Server 2013 和 Lync Server 2010 创建池。The Lync Server 2013 Topology Builder must be used to create pools for both Lync Server 2013 and Lync Server 2010.

Lync Server 2010 拓扑生成器错误消息Lync Server 2010 Topology Builder error message

Lync Server 拓扑生成器 MMC Snap 错误Lync Server Topology Builder MMC Snap Error