RouterDiscoveryEnabled (microsoft-ipv4settings-interface-RouterDiscoveryEnabled) RouterDiscoveryEnabled (microsoft-windows-tcpip-interfaces-interface-ipv4settings-routerdiscoveryenabled)

RouterDiscoveryEnabled 指定是否为此接口的 IPv4 协议启用了路由器发现协议,该协议将通知主机是否存在路由器。RouterDiscoveryEnabled specifies whether the router discovery protocol, which informs hosts of the existence of routers, is enabled for the IPv4 protocol for this interface. 此设置控制 Internet 控制消息协议 (ICMP) 路由器发现。This setting controls Internet Control Message Protocol (ICMP) router discovery.

Values

truetrue

在此接口上启用 IPv4 协议的路由器发现。Enables router discovery for the IPv4 protocol on this interface.

falsefalse

在此接口上禁用 IPv4 协议的路由器发现。Disables router discovery for the IPv4 protocol on this interface. 这是默认值。This is the default value.

有效的配置阶段Valid Configuration Passes

specializespecialize

windowsPEwindowsPE

父层次结构Parent Hierarchy

Microsoft-Windows-TCPIP | 接口 | 接口 | Ipv4Settings | RouterDiscoveryEnabledMicrosoft-Windows-TCPIP | Interfaces | Interface | Ipv4Settings | RouterDiscoveryEnabled

适用于Applies To

有关此组件支持的 Windows 版本和体系结构的列表,请参阅 Microsoft-WINDOWS TCPIPFor the list of the Windows editions and architectures that this component supports, see Microsoft-Windows-TCPIP.

XML 示例XML Example

以下 XML 输出显示了如何配置 TCPIP。The following XML output shows how to configure TCPIP.

<component name="Microsoft-Windows-TCPIP" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
   <Interfaces>
   <!-- Add static IP address (192.168.0.1/24, ffff:1::3/48) & route (12.34.0.0/16) to interface with identifier "Ethernet 1" -->      <Interface wcm:action="add">
         <Ipv4Settings>
            <DhcpEnabled>true</DhcpEnabled> 
            <Metric>20</Metric> 
            <RouterDiscoveryEnabled>false</RouterDiscoveryEnabled> 
         </Ipv4Settings>
         <Ipv6Settings>
            <DhcpEnabled>false</DhcpEnabled> 
            <Metric>30</Metric> 
            <RouterDiscoveryEnabled>true</RouterDiscoveryEnabled> 
         </Ipv6Settings>
      <Identifier>Ethernet 1</Identifier>
         <UnicastIpAddresses>
           <IpAddress wcm:action="add" wcm:keyValue="1">192.168.0.1/24</IpAddress>
           <IpAddress wcm:action="add" wcm:keyValue="2">ffff:1::3/48</IpAddress>
         </UnicastIpAddresses>
         <Routes>
            <Route wcm:action="add">
               <Identifier>1</Identifier> 
               <Metric>10</Metric> 
               <NextHopAddress>12.34.0.0</NextHopAddress> 
               <Prefix>16</Prefix> 
            </Route>
            <Route wcm:action="add">
               <Identifier>10</Identifier> 
               <Metric>29</Metric> 
               <NextHopAddress>12.34.56.0</NextHopAddress> 
               <Prefix>24</Prefix> 
            </Route>
         </Routes>
      </Interface>
      <Interface wcm:action="add">
         <Ipv4Settings>
            <DhcpEnabled>true</DhcpEnabled> 
            <Metric>20</Metric> 
            <RouterDiscoveryEnabled>false</RouterDiscoveryEnabled> 
         </Ipv4Settings>
         <Ipv6Settings>
            <DhcpEnabled>false</DhcpEnabled> 
            <Metric>10</Metric> 
            <RouterDiscoveryEnabled>true</RouterDiscoveryEnabled> 
         </Ipv6Settings>
         <Identifier>Local Area Connection</Identifier> 
         <UnicastIpAddresses>
            <IpAddress wcm:action="add" wcm:keyValue="1">123.45.67.8</IpAddress> 
            </UnicastIpAddresses>
         <Routes>
            <Route wcm:action="add">
               <Identifier>1</Identifier> 
               <Metric>10</Metric> 
               <NextHopAddress>12.34.0.0</NextHopAddress> 
               <Prefix>16</Prefix> 
            </Route>
         </Routes>
      </Interface>
   </Interfaces>
</component>

Ipv4SettingsIpv4Settings