Ipv6Settings
Ipv6Settings
包含 IPv6 协议的设置。
注意
接口中的设置必须按如下顺序添加:Ipv6Settings、Identifier、UnicastIpAddresses 和 Routes,如下面的 XML 示例所示。
子元素
设置 | 说明 |
---|---|
DhcpEnabled | 指定是否为 IPv6 协议启用动态主机配置协议 (DHCP)。 |
指标 | 指定用于区分相同前缀长度的多个匹配路由的指标。 |
RouterDiscoveryEnabled | 指定是否为 IPv6 协议启用路由器发现协议(通知主机存在路由器)。 |
有效配置阶段
specialize
windowsPE
父层次结构
Microsoft-Windows-TCPIP | Interfaces | Interface | Ipv6ettings
应用于
有关此组件支持的 Windows 版本和体系结构的列表,请参阅 Microsoft-Windows-TCPIP。
XML 示例
以下 XML 输出演示了如何配置 TCPIP。
<component name="Microsoft-Windows-TCPIP" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Interfaces>
<!-- Add static IP address (192.168.0.1/24, ffff:1::3/48) & route (12.34.0.0/16) to interface with identifier "Ethernet 1" --> <Interface wcm:action="add">
<Ipv4Settings>
<DhcpEnabled>true</DhcpEnabled>
<Metric>20</Metric>
<RouterDiscoveryEnabled>false</RouterDiscoveryEnabled>
</Ipv4Settings>
<Ipv6Settings>
<DhcpEnabled>false</DhcpEnabled>
<Metric>30</Metric>
<RouterDiscoveryEnabled>true</RouterDiscoveryEnabled>
</Ipv6Settings>
<Identifier>Ethernet 1</Identifier>
<UnicastIpAddresses>
<IpAddress wcm:action="add" wcm:keyValue="1">192.168.0.1/24</IpAddress>
<IpAddress wcm:action="add" wcm:keyValue="2">ffff:1::3/48</IpAddress>
</UnicastIpAddresses>
<Routes>
<Route wcm:action="add">
<Identifier>1</Identifier>
<Metric>10</Metric>
<NextHopAddress>12.34.0.0</NextHopAddress>
<Prefix>16</Prefix>
</Route>
<Route wcm:action="add">
<Identifier>10</Identifier>
<Metric>29</Metric>
<NextHopAddress>12.34.56.0</NextHopAddress>
<Prefix>24</Prefix>
</Route>
</Routes>
</Interface>
<Interface wcm:action="add">
<Ipv4Settings>
<DhcpEnabled>true</DhcpEnabled>
<Metric>20</Metric>
<RouterDiscoveryEnabled>false</RouterDiscoveryEnabled>
</Ipv4Settings>
<Ipv6Settings>
<DhcpEnabled>false</DhcpEnabled>
<Metric>10</Metric>
<RouterDiscoveryEnabled>true</RouterDiscoveryEnabled>
</Ipv6Settings>
<Identifier>Local Area Connection</Identifier>
<UnicastIpAddresses>
<IpAddress wcm:action="add" wcm:keyValue="1">123.45.67.8</IpAddress>
</UnicastIpAddresses>
<Routes>
<Route wcm:action="add">
<Identifier>1</Identifier>
<Metric>10</Metric>
<NextHopAddress>12.34.0.0</NextHopAddress>
<Prefix>16</Prefix>
</Route>
</Routes>
</Interface>
</Interfaces>
</component>