DhcpEnabled (microsoft-ipv6settings-interface-DhcpEnabled) DhcpEnabled (microsoft-windows-tcpip-interfaces-interface-ipv6settings-dhcpenabled)

DhcpEnabled 指定是否为 IPv6 协议启用动态主机配置协议 (DHCP) 。DhcpEnabled specifies whether the Dynamic Host Configuration Protocol (DHCP) is enabled for the IPv6 protocol.

Values

truetrue

在此接口上启用 IPv6 协议的 DHCP。Enables DHCP for the IPv6 protocol on this interface.

falsefalse

在此接口上为 IPv6 协议禁用 DHCP。Disables DHCP for the IPv6 protocol on this interface. 这是默认值。This is the default value.

有效的配置阶段Valid Configuration Passes

specializespecialize

windowsPEwindowsPE

父层次结构Parent Hierarchy

Microsoft-Windows-TCPIP | 接口 | 接口 | Ipv6Settings | DhcpEnabledMicrosoft-Windows-TCPIP | Interfaces | Interface | Ipv6Settings | DhcpEnabled

适用于Applies To

有关此组件支持的 Windows 版本和体系结构的列表,请参阅 Microsoft-WINDOWS TCPIPFor the list of the Windows editions and architectures that this component supports, see Microsoft-Windows-TCPIP.

XML 示例XML Example

以下 XML 输出显示了如何配置 TCPIP。The following XML output shows how to configure TCPIP.

<component name="Microsoft-Windows-TCPIP" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
   <Interfaces>
   <!-- Add static IP address (192.168.0.1/24, ffff:1::3/48) & route (12.34.0.0/16) to interface with identifier "Ethernet 1" -->      <Interface wcm:action="add">
         <Ipv4Settings>
            <DhcpEnabled>true</DhcpEnabled> 
            <Metric>20</Metric> 
            <RouterDiscoveryEnabled>false</RouterDiscoveryEnabled> 
         </Ipv4Settings>
         <Ipv6Settings>
            <DhcpEnabled>false</DhcpEnabled> 
            <Metric>30</Metric> 
            <RouterDiscoveryEnabled>true</RouterDiscoveryEnabled> 
         </Ipv6Settings>
      <Identifier>Ethernet 1</Identifier>
         <UnicastIpAddresses>
           <IpAddress wcm:action="add" wcm:keyValue="1">192.168.0.1/24</IpAddress>
           <IpAddress wcm:action="add" wcm:keyValue="2">ffff:1::3/48</IpAddress>
         </UnicastIpAddresses>
         <Routes>
            <Route wcm:action="add">
               <Identifier>1</Identifier> 
               <Metric>10</Metric> 
               <NextHopAddress>12.34.0.0</NextHopAddress> 
               <Prefix>16</Prefix> 
            </Route>
            <Route wcm:action="add">
               <Identifier>10</Identifier> 
               <Metric>29</Metric> 
               <NextHopAddress>12.34.56.0</NextHopAddress> 
               <Prefix>24</Prefix> 
            </Route>
         </Routes>
      </Interface>
      <Interface wcm:action="add">
         <Ipv4Settings>
            <DhcpEnabled>true</DhcpEnabled> 
            <Metric>20</Metric> 
            <RouterDiscoveryEnabled>false</RouterDiscoveryEnabled> 
         </Ipv4Settings>
         <Ipv6Settings>
            <DhcpEnabled>false</DhcpEnabled> 
            <Metric>10</Metric> 
            <RouterDiscoveryEnabled>true</RouterDiscoveryEnabled> 
         </Ipv6Settings>
         <Identifier>Local Area Connection</Identifier> 
         <UnicastIpAddresses>
            <IpAddress wcm:action="add" wcm:keyValue="1">123.45.67.8</IpAddress> 
            </UnicastIpAddresses>
         <Routes>
            <Route wcm:action="add">
               <Identifier>1</Identifier> 
               <Metric>10</Metric> 
               <NextHopAddress>12.34.0.0</NextHopAddress> 
               <Prefix>16</Prefix> 
            </Route>
         </Routes>
      </Interface>
   </Interfaces>
</component>

Ipv6SettingsIpv6Settings