RouterDiscoveryEnabled (microsoft-ipv6settings-interface-RouterDiscoveryEnabled) RouterDiscoveryEnabled (microsoft-windows-tcpip-interfaces-interface-ipv6settings-routerdiscoveryenabled)

RouterDiscoveryEnabled 控制是否为 IPv6 协议启用了路由器发现协议(它会通知主机是否存在路由器)。RouterDiscoveryEnabled controls whether the router discovery protocol—which informs hosts of the existence of routers—is enabled for the IPv6 protocol. 此设置控制 RFC 2461 中定义的 IPv6 邻居发现协议。This setting controls the IPv6 Neighbor Discovery protocol defined in RFC 2461.

Values

truetrue

在此接口上启用 IPv6 协议的路由器发现。Enables router discovery for the IPv6 protocol on this interface. 这是默认值。This is the default value.

falsefalse

在此接口上禁用 IPv6 协议的路由器发现。Disables router discovery for the IPv6 protocol on this interface.

有效的配置阶段Valid Configuration Passes

specializespecialize

windowsPEwindowsPE

父层次结构Parent Hierarchy

Microsoft-Windows-TCPIP | 接口 | 接口 | Ipv6Settings | RouterDiscoveryEnabledMicrosoft-Windows-TCPIP | Interfaces | Interface | Ipv6Settings | RouterDiscoveryEnabled

适用于Applies To

有关此组件支持的 Windows 版本和体系结构的列表,请参阅 Microsoft-WINDOWS TCPIPFor the list of the Windows editions and architectures that this component supports, see Microsoft-Windows-TCPIP.

XML 示例XML Example

以下 XML 输出显示了如何配置 TCPIP。The following XML output shows how to configure TCPIP.

<component name="Microsoft-Windows-TCPIP" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
   <Interfaces>
   <!-- Add static IP address (192.168.0.1/24, ffff:1::3/48) & route (12.34.0.0/16) to interface with identifier "Ethernet 1" -->      <Interface wcm:action="add">
         <Ipv4Settings>
            <DhcpEnabled>true</DhcpEnabled> 
            <Metric>20</Metric> 
            <RouterDiscoveryEnabled>false</RouterDiscoveryEnabled> 
         </Ipv4Settings>
         <Ipv6Settings>
            <DhcpEnabled>false</DhcpEnabled> 
            <Metric>30</Metric> 
            <RouterDiscoveryEnabled>true</RouterDiscoveryEnabled> 
         </Ipv6Settings>
      <Identifier>Ethernet 1</Identifier>
         <UnicastIpAddresses>
           <IpAddress wcm:action="add" wcm:keyValue="1">192.168.0.1/24</IpAddress>
           <IpAddress wcm:action="add" wcm:keyValue="2">ffff:1::3/48</IpAddress>
         </UnicastIpAddresses>
         <Routes>
            <Route wcm:action="add">
               <Identifier>1</Identifier> 
               <Metric>10</Metric> 
               <NextHopAddress>12.34.0.0</NextHopAddress> 
               <Prefix>16</Prefix> 
            </Route>
            <Route wcm:action="add">
               <Identifier>10</Identifier> 
               <Metric>29</Metric> 
               <NextHopAddress>12.34.56.0</NextHopAddress> 
               <Prefix>24</Prefix> 
            </Route>
         </Routes>
      </Interface>
      <Interface wcm:action="add">
         <Ipv4Settings>
            <DhcpEnabled>true</DhcpEnabled> 
            <Metric>20</Metric> 
            <RouterDiscoveryEnabled>false</RouterDiscoveryEnabled> 
         </Ipv4Settings>
         <Ipv6Settings>
            <DhcpEnabled>false</DhcpEnabled> 
            <Metric>10</Metric> 
            <RouterDiscoveryEnabled>true</RouterDiscoveryEnabled> 
         </Ipv6Settings>
         <Identifier>Local Area Connection</Identifier> 
         <UnicastIpAddresses>
            <IpAddress wcm:action="add" wcm:keyValue="1">123.45.67.8</IpAddress> 
            </UnicastIpAddresses>
         <Routes>
            <Route wcm:action="add">
               <Identifier>1</Identifier> 
               <Metric>10</Metric> 
               <NextHopAddress>12.34.0.0</NextHopAddress> 
               <Prefix>16</Prefix> 
            </Route>
         </Routes>
      </Interface>
   </Interfaces>
</component>

Ipv6SettingsIpv6Settings