更新并安装设备驱动程序(如果需要)Update and install device drivers if needed

如果使用的是需要驱动程序的 USB 零客户端或外设,此时应安装驱动程序。If you are using USB zero clients or peripherals that require drivers, you should install the drivers at this time. 最好是设备管理器检查是否有任何驱动程序警报,并为这些设备安装驱动程序。It's a good idea also to check Device Manager for any driver alerts, and install drivers for those devices.

通常,以下类型的设备需要最新的驱动程序:Generally, the most current drivers are required for following types of devices:

  • USB 零客户端USB zero clients

  • USB over 以太网零客户端USB-over-Ethernet zero clients

  • 磁盘控制器Disk controllers

  • 网络适配器Network adapters

  • 声音控制器Sound controllers

  • USB 主机控制器USB host controllers

  • 图形卡Graphic Cards

在设备管理器中检查驱动程序警报To check for driver alerts in Device Manager

  1. 打开 "开始" 屏幕。Open the Start screen.

  2. 键入 "计算机管理",然后单击结果中的 "计算机管理"。Type computer management, and then click Computer Management in the results.

  3. 在 "计算机管理" 控制台树中,单击 "设备管理器"。In the Computer Management console tree, click Device Manager.

  4. 在右侧的 "系统设备" 中,检查可能影响 MultiPoint Server 的驱动程序警报。In the system devices on the right, check for driver alerts that might affect MultiPoint Server.

在 MultiPoint 管理器中安装设备驱动程序To install device drivers in MultiPoint Manager

  1. 若要打开 MultiPoint 管理器,请搜索 "MultiPoint 管理器",然后单击结果中的 " Multipoint 管理器"。To open MultiPoint Manager, search for "MultiPoint Manager," and then click MultiPoint Manager in the results.

  2. 在 MultiPoint 管理器中,单击 "主页" 选项卡,然后单击 "切换到控制台模式"。In MultiPoint Manager, click the Home tab, and then click Switch to console mode.

  3. 若要安装设备驱动程序,请双击驱动程序文件,然后按照说明安装驱动程序。To install a device driver, double click the driver file, and follow the instructions to install the driver.

  4. 重复上述步骤以安装所有必需的驱动程序。Repeat the preceding step to install all required drivers.

    备注

    如果安装需要重新启动计算机,则在安装下一个驱动程序之前,需要切换回控制台模式。If an installation requires a computer restart, you will need to switch back to console mode before you install the next driver. MultiPoint server 始终在工作站模式下启动。MultiPoint server always starts in station mode. 若要切换到控制台模式,请转到 MultiPoint 管理器中的 "主页" 选项卡,然后单击 "切换到控制台模式"。To switch to console mode go to the Home tab in the MultiPoint Manager and click Switch to console mode.