EMAIL2 云解决方案提供商EMAIL2 CSP

EMAIL2 配置服务提供程序 (CSP) 用于配置简单邮件传输协议 (SMTP) 电子邮件帐户。The EMAIL2 configuration service provider (CSP) is used to configure Simple Mail Transfer Protocol (SMTP) email accounts.

注意 此配置服务提供程序要求从网络配置应用程序访问 ID_CAP_CSP_FOUNDATION 和 ID_CAP_CSP_MAIL 功能。Note This configuration service provider requires the ID_CAP_CSP_FOUNDATION and ID_CAP_CSP_MAIL capabilities to be accessed from a network configuration application. 在桌面上,仅支持按用户配置。On the desktop, only per user configuration is supported.

下面以树格式显示 OMA DM 和 OMA 客户端预配所使用的 EMAIL2 配置服务提供程序管理对象。The following shows the EMAIL2 configuration service provider management object in tree format as used by both OMA DM and OMA Client Provisioning.

./Vendor/MSFT
EMAIL2
----Account GUID
--------ACCOUNTICON
--------ACCOUNTTYPE
--------AUTHNAME
--------AUTHREQUIRED
--------AUTHSECRET
--------DOMAIN
--------DWNDAY
--------INSERVER
--------LINGER
--------KEEPMAX
--------NAME
--------OUTSERVER
--------REPLYADDR
--------SERVICENAME
--------SERVICETYPE
--------RETRIEVE
--------SERVERDELETEACTION
--------CELLULARONLY
--------SYNCINGCONTENTTYPES
--------CONTACTSSERVER
--------CALENDARSERVER
--------CONTACTSSERVERREQUIRESSL
--------CALENDARSERVERREQUIRESSL
--------CONTACTSSYNCSCHEDULE
--------CALENDARSYNCSCHEDULE
--------SMTPALTAUTHNAME
--------SMTPALTDOMAIN
--------SMTPALTENABLED
--------SMTPALTPASSWORD
--------TAGPROPS
------------8128000B
------------812C000B

在 Windows 10 移动版中,在用户开箱即用体验后,OEM 或移动运营商可以使用 EMAIL2 配置服务提供商通过无线方式使用移动运营商的专有邮件预配设备。In Windows 10 Mobile, after the user’s out of box experience, an OEM or mobile operator can use the EMAIL2 configuration service provider to provision the device with a mobile operator’s proprietary mail over the air. 预配后,"开始****"屏幕具有专用邮件提供商的磁贴,并且应用程序列表的"设置、电子邮件和帐户"下&一链接After provisioning, the Start screen has a tile for the proprietary mail provider and there is also a link to it in the applications list under Settings, email & accounts. 在 EMAIL2 CSP 对帐户进行无线更新后,设备必须关闭电源,然后重新打开以查看同步状态。After an account has been updated over-the-air by the EMAIL2 CSP, the device must be powered off and then powered back on to see the sync status.

配置数据在通过 OTA 传输的 (不) 。Configuration data is not encrypted when sent over the air (OTA). 请注意,发送敏感配置数据(如密码)时存在潜在的安全风险。Be aware that this is a potential security risk when sending sensitive configuration data, such as passwords.

重要

所有"添加"和"替换"命令都需要封装在"原子"部分。All Add and Replace commands need to be wrapped in an Atomic section.

EMAIL2EMAIL2
配置服务提供程序根节点。The configuration service provider root node.

支持的操作为 Get。Supported operation is Get.

GUIDGUID
定义特定的电子邮件帐户。Defines a specific email account. 必须为设备 (GUID) 全局唯一标识符。A globally unique identifier (GUID) must be generated for each email account on the device. 使用与现有帐户具有相同的 GUID 的帐户进行设置不会创建新帐户,在这种情况下,Add 命令将失败。Provisioning with an account that has the same GUID as an existing one does not create the new account and Add command will fail in this case.

支持的操作包括 Get、Add 和 Delete。Supported operations are Get, Add, and Delete.

EMAIL2 {} 配置服务提供程序中需要大括号来表示 GUID。The braces {} around the GUID are required in the EMAIL2 configuration service provider.

  • 对于 OMA 客户端预配,可以按字面发送大括号。For OMA Client Provisioning, the braces can be sent literally. 例如,<characteristic type="{C556E16F-56C4-4edb-9C64-D9469EE1FBE0}"/>For example, <characteristic type="{C556E16F-56C4-4edb-9C64-D9469EE1FBE0}"/>.

  • 对于 OMA DM,必须分别使用 0x7B 和 0x7D 的 ASCII 值发送大括号。For OMA DM, the braces must be sent using ASCII values of 0x7B and 0x7D respectively. 例如,For example, <Target><LocURI>./Vendor/MSFT/EMAIL2/0x7BC556E16F-56C4-4edb-9C64-D9469EE1FBE0x7D</LocURI></Target>

ACCOUNTICONACCOUNTICON
可选。Optional. 返回与帐户相关联的图标的位置。Returns the location of the icon associated with the account.

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace and Delete.

帐户图标可以用作"开始"列表中的磁贴,或****"设置"下的"应用程序"列表中的&图标The account icon can be used as a tile in the Start list or an icon in the applications list under Settings, email & accounts. 已在设备上提供一些图标。Some icons are already provided on the device. POP/IMAP 或通用 ActiveSync 帐户的建议图标位于 res://AccountSettingsSharedRes{ScreenResolution}!%s.genericmail.png。The suggested icon for POP/IMAP or generic ActiveSync accounts is at res://AccountSettingsSharedRes{ScreenResolution}!%s.genericmail.png. Exchange 帐户的建议图标位于 res://AccountSettingsSharedRes{ScreenResolution}!%s.office.outlook.png。The suggested icon for Exchange Accounts is at res://AccountSettingsSharedRes{ScreenResolution}!%s.office.outlook.png. 如果需要,可以添加自定义图标。Custom icons can be added if desired.

ACCOUNTTYPEACCOUNTTYPE
必需。Required. 指定帐户的类型。Specifies the type of account.

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace and Delete.

有效值包括:Valid values are:

  • 电子邮件:普通电子邮件Email: normal email

  • VVM:可视语音邮件VVM: visual voice mail

AUTHNAMEAUTHNAME
必需。Required. 指定用于授权用户使用特定电子邮件帐户的名称的字符串 (也称为用户的登录名) 。Character string that specifies the name used to authorize the user to a specific email account (also known as the user's logon name).

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace and Delete.

AUTHREQUIREDAUTHREQUIRED
可选。Optional. 指定传出服务器是否需要身份验证的字符串。Character string that specifies whether the outgoing server requires authentication.

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace and Delete.

有效值为下列值之一:Valid values are one of the following:

  • 0 - 不需要服务器身份验证。0 - Server authentication is not required.
  • 1 - 需要服务器身份验证。1 - Server authentication is required.

注意 如果未指定此值,则不执行 SMTP 身份验证。Note If this value is not specified, then no SMTP authentication is done. 此外,这不同于 SMTPALTENABLED。Also, this is different from SMTPALTENABLED.

AUTHSECRETAUTHSECRET
可选。Optional. 指定用户密码的字符串。Character string that specifies the user's password. SMTP 身份验证使用相同的密码。The same password is used for SMTP authentication.

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace and Delete.

DOMAIN
可选。Optional. 指定传入服务器凭据域的字符串。Character string that specifies the incoming server credentials domain. 限制为 255 个字符。Limited to 255 characters.

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace and Delete.

DWNDAYDWNDAY
可选。Optional. 指定应从服务器下载多少天的电子邮件的字符串。Character string that specifies how many days' worth of email should be downloaded from the server.

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace and Delete.

有效值为下列值之一:Valid values are one of the following:

  • -1:指定应下载服务器上当前的所有电子邮件。-1: Specifies that all email currently on the server should be downloaded.

  • 7:指定应下载 7 天的电子邮件。7: Specifies that 7 days’ worth of email should be downloaded.

  • 14:指定应下载 14 天的电子邮件。14: Specifies that 14 days’ worth of email should be downloaded.

  • 30:指定应下载 30 天的电子邮件。30: Specifies that 30 days’ worth of email should be downloaded.

INSERVERINSERVER
必需。Required. 指定传入服务器名称和端口号的字符串。Character string that specifies the name of the incoming server name and port number. 限制为 62 个字符。This is limited to 62 characters. 如果使用标准端口号,则不必指定端口号。If the standard port number is used, then you don't have to specify the port number. 值格式为:The value format is:

  • 服务器名称:端口号server name:port number

支持的操作包括 Get、Add 和 Replace。Supported operations are Get, Add and Replace.

延迟LINGER
可选。Optional. 指定电子邮件发送/接收更新之间的时长的字符串(分钟)。Character string that specifies the length of time between email send/receive updates in minutes.

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace and Delete.

有效值包括:Valid values are:

  • 0 - 必须手动执行电子邮件更新。0 - Email updates must be performed manually.

  • 15 (默认) - 两次更新之间等待 15 分钟。15 (default) - Wait for 15 minutes between updates.

  • 30 - 在两次更新之间等待 30 分钟。30 - Wait for 30 minutes between updates.

  • 60 - 在两次更新之间等待 60 分钟。60 - Wait for 60 minutes between updates.

  • 120 - 两次更新之间等待 120 分钟。120 - Wait for 120 minutes between updates.

KEEPMAXKEEPMAX
可选。Optional. 指定邮件附件的最大大小。Specifies the maximum size for a message attachment. 不会下载超过此大小的附件,但会保留在服务器上。Attachments beyond this size will not be downloaded but it will remain on the server. 将下载邮件本身。The message itself will be downloaded. 只能为 IMAP4 帐户设置此值。This value can be set only for IMAP4 accounts.

限制以 KB 为单位指定The limit is specified in KB

有效值为 0、25、50、125 和 250。Valid values are 0, 25, 50, 125, and 250.

值 0 表示将强制实施无限制。A value of 0 meaning that no limit will be enforced.

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace and Delete.

NAMENAME
可选。Optional. 指定在已发送的电子邮件上显示的发件人姓名的字符串。Character string that specifies the name of the sender displayed on a sent email. 应设置为用户名。It should be set to the user’s name. 限制为 255 个字符。Limited to 255 characters.

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace and Delete.

OUTSERVEROUTSERVER
必需。Required. 指定邮件服务的传出电子邮件服务器的名称的字符串。Character string that specifies the name of the messaging service's outgoing email server. 限制为 62 个字符。Limited to 62 characters. 值格式为:The value format is:

  • 服务器名称:端口号server name:port number

支持的操作包括 Get、Add、Delete 和 Replace。Supported operations are Get, Add, Delete, and Replace.

REPLYADDRREPLYADDR
必需。Required. 指定用户回复电子邮件地址的字符串 (通常与用户电子邮件地址) 。Character string that specifies the reply email address of the user (usually the same as the user email address). 如果没有电子邮件,发送电子邮件将失败。Sending email will fail without it. 限制为 255 个字符。Limited to 255 characters.

支持的操作包括 Get、Add、Delete 和 Replace。Supported operations are Get, Add, Delete and Replace.

SERVICENAMESERVICENAME
必需。Required. 指定要创建或编辑的电子邮件服务的名称的字符串, (32 个字符) 。Character string that specifies the name of the email service to create or edit (32 characters maximum).

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace, and Delete.

注意 EMAIL2 配置服务提供程序不支持参数SERVICENAMESERVICETYPE上的 OMA DM替换命令。Note The EMAIL2 Configuration Service Provider does not support the OMA DM Replace command on the parameters SERVICENAME and SERVICETYPE. 若要替换电子邮件帐户名称或帐户服务类型,必须删除现有电子邮件帐户,然后必须创建一个新电子邮件帐户。To replace either the email account name or the account service type, the existing email account must be deleted and then a new one must be created.

SERVICETYPESERVICETYPE
必需。Required. 指定要创建或编辑电子邮件服务类型的字符串 (例如,"IMAP4"或"POP3") 。Character string that specifies the type of email service to create or edit (for example, "IMAP4" or "POP3").

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace, and Delete.

注意 EMAIL2 配置服务提供程序不支持参数SERVICENAMESERVICETYPE上的 OMA DM替换命令。Note The EMAIL2 Configuration Service Provider does not support the OMA DM Replace command on the parameters SERVICENAME and SERVICETYPE. 若要替换电子邮件帐户名称或帐户服务类型,必须删除现有电子邮件帐户,然后必须创建一个新电子邮件帐户。To replace either the email account name or the account service type, the existing email account must be deleted and then a new one must be created.

检索RETRIEVE
可选。Optional. 指定从传入电子邮件服务器检索的邮件的最大大小(以字节为单位)。Specifies the maximum size in bytes for messages retrieved from the incoming email server. 将检索超过此大小的邮件,但会截断这些邮件。Messages beyond this size are retrieved, but truncated.

有效值为 512、1024、2048、5120、20480 和 51200。Valid values are 512, 1024, 2048, 5120, 20480, and 51200.

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace, and Delete.

SERVERDELETEACTIONSERVERDELETEACTION
可选。Optional. 指定如何在服务器上删除邮件的字符串。Character string that specifies how message is deleted on server. 有效值:Valid values:

  • 1 - 删除服务器上的消息1 - delete message on the server
  • 2 - 将邮件保留在服务器上, ("回收站"文件夹) 。2 - keep the message on the server (delete to the Trash folder).

任何其他值都会导致默认操作,具体取决于传输。Any other value results in default action, which depends on the transport.

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace, and Delete.

CELLULARONLYCELLULARONLY
可选。Optional. 如果设置此标志,则帐户仅使用手机网络,而不是 WI-Fi。If this flag is set, the account only uses the cellular network and not Wi-Fi.

值类型为字符串。Value type is string. 支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace, and Delete.

SYNCINGCONTENTTYPESSYNCINGCONTENTTYPES
必需。Required. 指定内容类型支持同步的位掩码,例如 (邮件、联系人、日历) 。Specifies a bitmask for which content types are supported for syncing (eg: Mail, Contacts, Calendar).

  • 无 (0x0) No data (0x0)
  • 联系人 (0x1) Contacts (0x1)
  • 邮件 (0x2) Mail (0x2)
  • 约会 (0x4) Appointments (0x4)
  • 任务 (0x8) Tasks (0x8)
  • 备注 (0x10) Notes (0x10)
  • 源 (0x60) Feeds (0x60)
  • 网络照片 (0x180) Network Photo (0x180)
  • 组和 (0x200) Group and room (0x200)
  • 聊天 (0x400) Chat (0x400)
  • 电子邮件收件人电子邮件 (0x800) Email Recipient Email (0x800)
  • 服务器链接 (0x1000) Server Link (0x1000)
  • 所有项目 (0xffffffff) All items (0xffffffff)

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace, and Delete.

CONTACTSSERVERCONTACTSSERVER
可选。Optional. 用于联系人同步的服务器(如果它不同于电子邮件服务器)。Server for contact sync if it is different from the email server.

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace, and Delete.

CALENDARSERVERCALENDARSERVER
可选。Optional. 日历同步的服务器(如果它不同于电子邮件服务器)。Server for calendar sync if it is different from the email server.

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace, and Delete.

CONTACTSSERVERREQUIRESSLCONTACTSSERVERREQUIRESSL
可选。Optional. 指示与联系人服务器的连接是否要求 SSL。Indicates if the connection to the contact server requires SSL.

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace, and Delete.

CALENDARSERVERREQUIRESSLCALENDARSERVERREQUIRESSL
可选。Optional. 指示与日历服务器的连接是否要求 SSL。Indicates if the connection to the calendar server requires SSL.

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace, and Delete.

CONTACTSSYNCSCHEDULECONTACTSSYNCSCHEDULE
可选。Optional. 设置同步联系人项目的计划。Sets the schedule for syncing contact items.

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace, and Delete.

CALENDARSYNCSCHEDULECALENDARSYNCSCHEDULE
可选。Optional. 设置同步日历项目的计划。Sets the schedule for syncing calendar items.

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace, and Delete.

SMTPALTAUTHNAMESMTPALTAUTHNAME
可选。Optional. 指定与用户显示名称 SMTP 电子邮件帐户关联的邮件的字符串。Character string that specifies the display name associated with the user's alternative SMTP email account.

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace and Delete.

SMTPALTDOMAINSMTPALTDOMAIN
可选。Optional. 指定用户备用 SMTP 帐户的域名的字符串。Character string that specifies the domain name for the user's alternative SMTP account.

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace and Delete.

SMTPALTENABLEDSMTPALTENABLED
可选。Optional. 指定是否启用用户的备用 SMTP 帐户的字符串。Character string that specifies if the user's alternate SMTP account is enabled.

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace and Delete.

值"FALSE"指定禁用用户的备用 SMTP 电子邮件帐户。A value of "FALSE" specifies that the user's alternate SMTP email account is disabled. 值"TRUE"指定启用用户的备用 SMTP 电子邮件帐户。A value of "TRUE" specifies that the user's alternate SMTP email account is enabled.

SMTPALTPASSWORDSMTPALTPASSWORD
可选。Optional. 指定用户备用 SMTP 帐户的密码的字符串。Character string that specifies the password for the user's alternate SMTP account.

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace and Delete.

TAGPROPSTAGPROPS
可选。Optional. 定义一组具有非标准元素名称的属性。Defines a group of properties with non-standard element names.

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace and Delete.

TAGPROPS/8128000BTAGPROPS/8128000B
可选。Optional. 指定传入电子邮件服务器是否要求 SSL 的字符串。Character string that specifies if the incoming email server requires SSL.

支持的操作包括 Get、Add、Replace 和 Delete。Supported operations are Get, Add, Replace and Delete.

值是下列值之一:Value is one of the following:

  • 0 - 不需要 SSL。0 - SSL is not required.
  • 1 - 需要 SSL。1 - SSL is required.

TAGPROPS/812C000BTAGPROPS/812C000B
可选。Optional. 指定传出电子邮件服务器是否要求 SSL 的字符串。Character string that specifies if the outgoing email server requires SSL.

支持的操作包括 Get 和 Replace。Supported operations are Get and Replace.

值是下列值之一:Value is one of the following:

  • 0 - 不需要 SSL。0 - SSL is not required.
  • 1 - 需要 SSL。1 - SSL is required.

备注Remarks

预配应用程序删除或配置回滚时,EMAIL2 CSP 会将请求传递给配置管理器,该管理器在外部处理事务。When an application removal or configuration roll-back is provisioned, the EMAIL2 CSP passes the request to Configuration Manager, which handles the transaction externally. 删除 MAPI 应用程序后,将删除使用它创建的帐户,并且传输 (例如,短信服务 [SMS]、邮局协议 [POP]或简单邮件传输协议 [SMTP]) 可能存储的所有邮件和其他属性都将丢失。When a MAPI application is removed, the accounts that were created with it are deleted and all messages and other properties that the transport (for example, Short Message Service [SMS], Post Office Protocol [POP], or Simple Mail Transfer Protocol [SMTP]) might have stored, are lost. 如果尝试创建新电子邮件帐户失败,则会自动删除该新帐户。If an attempt to create a new email account is unsuccessful, the new account is automatically deleted. 如果编辑现有帐户的尝试失败,则原始配置将在 (还原) 。If an attempt to edit an existing account is unsuccessful, the original configuration is automatically rolled back (restored).

对于 OMA DM,EMAIL2 CSP 处理 Replace 命令的方式与大多数其他配置服务提供程序不同。For OMA DM, the EMAIL2 CSP handles the Replace command differently from most other configuration service providers. 对于 EMAIL2 CSP,Configuration Manager 隐式添加要替换的节点的缺失部分或节点路径中任何段(如果它在块中留 <LocURI></LocURI> 掉)。For the EMAIL2 CSP, Configuration Manager implicitly adds the missing part of the node to be replaced or any segment in the path of the node if it is left out in the <LocURI></LocURI> block. 为传出服务器登录凭据定义了单独的参数。There are separate parameters defined for the outgoing server logon credentials. 以下是这些凭据的使用规则:The following are the usage rules for these credentials:

  • 传入服务器登录凭据用于 AUTHNAME (AUTHSECRET 和 DOMAIN) 除非设置了传出服务器凭据。The incoming server logon credentials are used (AUTHNAME, AUTHSECRET, and DOMAIN) unless the outgoing server credentials are set.

  • 如果存在某些(但不是所有)传出服务器凭据参数,则 EMAIL2 配置服务提供程序将被视为有误。If some but not all of the outgoing server credentials parameters are present then the EMAIL2 Configuration Service Provider will be considered in error.

  • 除非帐户 GUID 已知,否则无法查询帐户详细信息。Account details cannot be queried unless the account GUID is known. 目前,无法对帐户 GUID 执行顶级查询。Currently, there is no way to perform a top-level query for account GUIDs.

Windows 10 移动版支持传输层安全性 (TLS) ,但无法通过此配置服务提供程序显式启用此功能,并且用户无法通过 UI 启用 TLS。Windows 10 Mobile supports Transport Layer Security (TLS), but this cannot be explicitly enabled through this configuration service provider, and the user cannot enable TLS through the UI. 如果与邮件服务器的连接是使用延迟 SSL 启动的,则邮件服务器可以将 STARTTLS 作为服务器功能发送,并且将启用 TLS。If the connection to the mail server is initiated with deferred SSL, the mail server can send STARTTLS as a server capability and TLS will be enabled. 以下步骤显示如何启用 TLS。The following steps show how to enable TLS.

  1. 设备尝试使用 SSL 连接到邮件服务器。The device attempts to connect to the mail server using SSL.

  2. 如果 SSL 连接失败,设备将尝试使用延迟 SSL 进行连接。If the SSL connection fails, the device attempts to connect using deferred SSL.

  3. 如果连接同时通过 SSL 和延迟 SSL,并且用户选择的服务器要求使用 ssl (ssl) , 则设备不会尝试其他连接。If the connection fails over both SSL and deferred SSL, and the user selected Server requires encrypted (SSL) connection, the device does not attempt another connection.

  4. 如果用户未选择"服务器需要加密的服务器 (SSL) 连接", 则设备将尝试建立非 SSL 连接。If the user did not select Server requires encrypted (SSL) connection, the device attempts to establish a non-SSL connection.

  5. 如果连接使用任意加密协议成功,设备将请求服务器功能。If the connection succeeds using any of the encryption protocols, the device requests the server capabilities.

  6. 如果邮件服务器发送的功能之一是 STARTTLS,而连接是延迟 SSL,则设备将启用 TLS。If one of the capabilities sent by the mail server is STARTTLS and the connection is deferred SSL, the device enables TLS. 在使用 SSL 或非 SSL 的连接上未启用 TLS。TLS is not enabled on connections using SSL or non-SSL.

配置服务提供程序参考Configuration service provider reference