UEFI 云解决方案提供商UEFI CSP

UEFI 配置服务提供程序 (CSP) 接口连接到 UEFI 的设备固件配置接口 (DFCI) 进行 BIOS 配置更改。The UEFI configuration service provider (CSP) interfaces to UEFI's Device Firmware Configuration Interface (DFCI) to make BIOS configuration changes. 此 CSP 已添加到 Windows 10 版本 1809 中。This CSP was added in Windows 10, version 1809.

备注

Windows 10 版本 1803 中发布的 UEFI CSP 版本已替换为此版本 (版本 1809) 。The UEFI CSP version published in Windows 10, version 1803 is replaced with this one (version 1809).

备注

生产 UEFI CSP 存在于 1809 中,但它取决于设备固件配置接口 (DFCI) 和 UEFI 固件是否符合此接口。The production UEFI CSP is present in 1809, but it depends upon the Device Firmware Configuration Interface (DFCI) and UEFI firmware to comply with this interface.

下面以树格式显示 UEFI CSP。The following shows the UEFI CSP in tree format.

./Vendor/MSFT
Uefi
----DeviceIdentifier
----Identity
--------Current
--------Apply
--------Result
----Permissions
--------Current
--------Apply
--------Result
----Settings
--------Current
--------Apply
--------Result
----Identity2
--------Apply
--------Result
----Permissions2
--------Apply
--------Result
----Settings2
--------Apply
--------Result

以下列表描述了特征和参数。The following list describes the characteristics and parameters.

./Vendor/MSFT/Uefi./Vendor/MSFT/Uefi
根节点。Root node.

DeviceIdentifierDeviceIdentifier
从描述设备标识符的 UEFI 中检索 XML。Retrieves XML from UEFI that describes the device identifier.

支持的操作为 Get。Supported operation is Get.

标识Identity
标识证书操作节点。Node for identity certificate operations.

支持的操作为 Get。Supported operation is Get.

Identity/CurrentIdentity/Current
从描述当前 UEFI 标识证书信息的 UEFI 中检索 XML。Retrieves XML from UEFI that describes the current UEFI identity certificate information.

支持的操作为 Get。Supported operation is Get.

标识/应用Identity/Apply
将标识信息包应用于 UEFI。Applies an identity information package to UEFI. 输入是 base64 编码格式的已签名程序包。Input is the signed package in base64 encoded format.

值类型为 Base64。Value type is Base64. 支持的操作是 Replace。Supported operation is Replace.

Identity/ResultIdentity/Result
检索上一个 Identity/Apply 操作中的二进制结果包。Retrieves the binary result package of the previous Identity/Apply operation.

支持的操作为 Get。Supported operation is Get.

权限Permissions
设置权限操作节点。Node for settings permission operations..

Permissions/CurrentPermissions/Current
从描述当前 UEFI 设置权限的 UEFI 检索 XML。Retrieves XML from UEFI that describes the current UEFI settings permissions.

支持的操作为 Get。Supported operation is Get.

权限/应用Permissions/Apply
将权限信息包应用于 UEFI。Apply a permissions information package to UEFI. 输入是 base64 编码格式的已签名程序包。Input is the signed package in base64 encoded format.

值类型为 Base64。Value type is Base64. 支持的操作是 Replace。Supported operation is Replace.

权限/结果Permissions/Result
检索上一个 Permissions/Apply 操作中的二进制结果包。Retrieves the binary result package of the previous Permissions/Apply operation. 此二进制包包含描述针对每个单独权限所采取的操作的 XML。This binary package contains XML describing the action taken for each individual permission.

支持的操作为 Get。Supported operation is Get.

“设置”Settings
设备设置操作节点。Node for device settings operations.

Settings/CurrentSettings/Current
从描述当前 UEFI 设置的 UEFI 中检索 XML。Retrieves XML from UEFI that describes the current UEFI settings.

支持的操作为 Get。Supported operation is Get.

设置/应用Settings/Apply
将设置信息包应用于 UEFI。Apply a settings information package to UEFI. 输入是 base64 编码格式的已签名程序包。Input is the signed package in base64 encoded format.

值类型为 Base64。Value type is Base64. 支持的操作是 Replace。Supported operation is Replace.

设置/结果Settings/Result
检索上一个"设置/应用"操作中的二进制结果包。Retrieves the binary result package of the previous Settings/Apply operation. 此二进制包包含描述针对每个单独设置采取的操作的 XML。This binary package contains XML describing the action taken for each individual setting.

支持的操作为 Get。Supported operation is Get.

Identity2Identity2
标识证书操作节点。Node for identity certificate operations. 用于发送第二个标识包而不重新启动操作系统的备用终结点。Alternate endpoint for sending a second identity package without an OS restart.

Identity2/ApplyIdentity2/Apply
将标识信息包应用于 UEFI。Apply an identity information package to UEFI. 输入是 base64 编码格式的已签名程序包。Input is the signed package in base64 encoded format. 用于在同一会话中发送两个标识包的备用位置。Alternate location for sending two identity packages in the same session.

值类型为 Base64。Value type is Base64. 支持的操作是 Replace。Supported operation is Replace.

Identity2/ResultIdentity2/Result
检索以前的 Identity2/Apply 操作中的二进制结果包。Retrieves the binary result package of the previous Identity2/Apply operation.

支持的操作为 Get。Supported operation is Get.

Permissions2Permissions2
设置权限操作节点。Node for settings permission operations. 用于发送第二个权限包而不重新启动操作系统的备用终结点。Alternate endpoint for sending a second permission package without an OS restart.

Permissions2/ApplyPermissions2/Apply
将权限信息包应用于 UEFI。Apply a permissions information package to UEFI. 输入是 base64 编码格式的已签名程序包。Input is the signed package in base64 encoded format. 用于在同一会话中发送两个权限信息包的备用位置。Alternate location for sending two permissions information packages in the same session.

值类型为 Base64。Value type is Base64. 支持的操作是 Replace。Supported operation is Replace.

Permissions2/ResultPermissions2/Result
从前面的 Permissions2/Apply 操作检索二进制结果包。Retrieves the binary result package from the previous Permissions2/Apply operation. 此二进制包包含描述针对每个单独权限所采取的操作的 XML。This binary package contains XML describing the action taken for each individual permission.

支持的操作为 Get。Supported operation is Get.

Settings2Settings2
设备设置操作节点。Node for device settings operations. 用于发送第二个设置包而不重新启动操作系统的备用终结点。Alternate endpoint for sending a second settings package without an OS restart.

Settings2/ApplySettings2/Apply
将设置信息包应用于 UEFI。Apply a settings information package to UEFI. 输入是 base64 编码格式的已签名程序包。Input is the signed package in base64 encoded format. 用于在同一会话中发送两个设置信息包的备用位置。Alternate location for sending two settings information packages in the same session.

值类型为 Base64。Value type is Base64. 支持的操作是 Replace。Supported operation is Replace.

Settings2/ResultSettings2/Result
检索以前的 Settings2/Apply 操作中的二进制结果包。Retrieves the binary result package of previous Settings2/Apply operation. 此二进制包包含描述针对每个单独设置采取的操作的 XML。This binary package contains XML describing the action taken for each individual setting.

支持的操作为 Get。Supported operation is Get.

UEFI DDF 文件UEFI DDF file