List<T>.RemoveRange(Int32, Int32) List<T>.RemoveRange(Int32, Int32) List<T>.RemoveRange(Int32, Int32) List<T>.RemoveRange(Int32, Int32) Method

定義

List<T> 移除的項目範圍。Removes a range of elements from the List<T>.

public:
 void RemoveRange(int index, int count);
public void RemoveRange (int index, int count);
member this.RemoveRange : int * int -> unit
Public Sub RemoveRange (index As Integer, count As Integer)

參數

index
Int32 Int32 Int32 Int32

要移除之項目範圍內之以零為起始的起始索引。The zero-based starting index of the range of elements to remove.

count
Int32 Int32 Int32 Int32

要移除的項目數目。The number of elements to remove.

例外狀況

index 小於 0。index is less than 0.

-或--or- count 小於 0。count is less than 0.

indexcount 不代表 List<T> 中項目的有效範圍。index and count do not denote a valid range of elements in the List<T>.

範例

下列範例會示範RemoveRange方法和對範圍採取動作List<T>之類別的各種其他方法。The following example demonstrates the RemoveRange method and various other methods of the List<T> class that act on ranges. 建立並修改清單之後, RemoveRange會使用方法, 從索引位置2開始移除清單中的兩個元素。After the list has been created and modified, the RemoveRange method is used to remove two elements from the list, beginning at index location 2.

using namespace System;
using namespace System::Collections::Generic;

void main()
{
    array<String^>^ input = { "Brachiosaurus", 
                              "Amargasaurus", 
                              "Mamenchisaurus" };

    List<String^>^ dinosaurs = 
        gcnew List<String^>((IEnumerable<String^>^) input);

    Console::WriteLine("\nCapacity: {0}", dinosaurs->Capacity);

    Console::WriteLine();
    for each(String^ dinosaur in dinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    Console::WriteLine("\nAddRange(dinosaurs)");
    dinosaurs->AddRange(dinosaurs);

    Console::WriteLine();
    for each(String^ dinosaur in dinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    Console::WriteLine("\nRemoveRange(2, 2)");
    dinosaurs->RemoveRange(2, 2);

    Console::WriteLine();
    for each(String^ dinosaur in dinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    input = gcnew array<String^> { "Tyrannosaurus", 
                                   "Deinonychus", 
                                   "Velociraptor"};

    Console::WriteLine("\nInsertRange(3, (IEnumerable<String^>^) input)");
    dinosaurs->InsertRange(3, (IEnumerable<String^>^) input);

    Console::WriteLine();
    for each(String^ dinosaur in dinosaurs )
    {
        Console::WriteLine(dinosaur);
    }

    Console::WriteLine("\noutput = dinosaurs->GetRange(2, 3)->ToArray()");
    array<String^>^ output = dinosaurs->GetRange(2, 3)->ToArray();
        
    Console::WriteLine();
    for each(String^ dinosaur in output )
    {
        Console::WriteLine(dinosaur);
    }
}

/* This code example produces the following output:

Capacity: 3

Brachiosaurus
Amargasaurus
Mamenchisaurus

AddRange(dinosaurs)

Brachiosaurus
Amargasaurus
Mamenchisaurus
Brachiosaurus
Amargasaurus
Mamenchisaurus

RemoveRange(2, 2)

Brachiosaurus
Amargasaurus
Amargasaurus
Mamenchisaurus

InsertRange(3, (IEnumerable<String^>^) input)

Brachiosaurus
Amargasaurus
Amargasaurus
Tyrannosaurus
Deinonychus
Velociraptor
Mamenchisaurus

output = dinosaurs->GetRange(2, 3)->ToArray()

Amargasaurus
Tyrannosaurus
Deinonychus
 */
using System;
using System.Collections.Generic;

public class Example
{
    public static void Main()
    {
        string[] input = { "Brachiosaurus", 
                           "Amargasaurus", 
                           "Mamenchisaurus" };

        List<string> dinosaurs = new List<string>(input);

        Console.WriteLine("\nCapacity: {0}", dinosaurs.Capacity);

        Console.WriteLine();
        foreach( string dinosaur in dinosaurs )
        {
            Console.WriteLine(dinosaur);
        }

        Console.WriteLine("\nAddRange(dinosaurs)");
        dinosaurs.AddRange(dinosaurs);

        Console.WriteLine();
        foreach( string dinosaur in dinosaurs )
        {
            Console.WriteLine(dinosaur);
        }

        Console.WriteLine("\nRemoveRange(2, 2)");
        dinosaurs.RemoveRange(2, 2);

        Console.WriteLine();
        foreach( string dinosaur in dinosaurs )
        {
            Console.WriteLine(dinosaur);
        }

        input = new string[] { "Tyrannosaurus", 
                               "Deinonychus", 
                               "Velociraptor"};

        Console.WriteLine("\nInsertRange(3, input)");
        dinosaurs.InsertRange(3, input);

        Console.WriteLine();
        foreach( string dinosaur in dinosaurs )
        {
            Console.WriteLine(dinosaur);
        }

        Console.WriteLine("\noutput = dinosaurs.GetRange(2, 3).ToArray()");
        string[] output = dinosaurs.GetRange(2, 3).ToArray();
        
        Console.WriteLine();
        foreach( string dinosaur in output )
        {
            Console.WriteLine(dinosaur);
        }
    }
}

/* This code example produces the following output:

Capacity: 3

Brachiosaurus
Amargasaurus
Mamenchisaurus

AddRange(dinosaurs)

Brachiosaurus
Amargasaurus
Mamenchisaurus
Brachiosaurus
Amargasaurus
Mamenchisaurus

RemoveRange(2, 2)

Brachiosaurus
Amargasaurus
Amargasaurus
Mamenchisaurus

InsertRange(3, input)

Brachiosaurus
Amargasaurus
Amargasaurus
Tyrannosaurus
Deinonychus
Velociraptor
Mamenchisaurus

output = dinosaurs.GetRange(2, 3).ToArray()

Amargasaurus
Tyrannosaurus
Deinonychus
 */
Imports System
Imports System.Collections.Generic

Public Class Example

    Public Shared Sub Main()

        Dim input() As String = { "Brachiosaurus", _
                                  "Amargasaurus", _
                                  "Mamenchisaurus" }

        Dim dinosaurs As New List(Of String)(input)

        Console.WriteLine(vbLf & "Capacity: {0}", dinosaurs.Capacity)

        Console.WriteLine()
        For Each dinosaur As String In dinosaurs
            Console.WriteLine(dinosaur)
        Next

        Console.WriteLine(vbLf & "AddRange(dinosaurs)")
        dinosaurs.AddRange(dinosaurs)

        Console.WriteLine()
        For Each dinosaur As String In dinosaurs
            Console.WriteLine(dinosaur)
        Next

        Console.WriteLine(vbLf & "RemoveRange(2, 2)")
        dinosaurs.RemoveRange(2, 2)

        Console.WriteLine()
        For Each dinosaur As String In dinosaurs
            Console.WriteLine(dinosaur)
        Next

        input = New String() { "Tyrannosaurus", _
                               "Deinonychus", _
                               "Velociraptor" }

        Console.WriteLine(vbLf & "InsertRange(3, input)")
        dinosaurs.InsertRange(3, input)

        Console.WriteLine()
        For Each dinosaur As String In dinosaurs
            Console.WriteLine(dinosaur)
        Next

        Console.WriteLine(vbLf & "output = dinosaurs.GetRange(2, 3).ToArray")
        Dim output() As String = dinosaurs.GetRange(2, 3).ToArray()
        
        Console.WriteLine()
        For Each dinosaur As String In output
            Console.WriteLine(dinosaur)
        Next

    End Sub
End Class

' This code example produces the following output:
'
'Capacity: 3
'
'Brachiosaurus
'Amargasaurus
'Mamenchisaurus
'
'AddRange(dinosaurs)
'
'Brachiosaurus
'Amargasaurus
'Mamenchisaurus
'Brachiosaurus
'Amargasaurus
'Mamenchisaurus
'
'RemoveRange(2, 2)
'
'Brachiosaurus
'Amargasaurus
'Amargasaurus
'Mamenchisaurus
'
'InsertRange(3, input)
'
'Brachiosaurus
'Amargasaurus
'Amargasaurus
'Tyrannosaurus
'Deinonychus
'Velociraptor
'Mamenchisaurus
'
'output = dinosaurs.GetRange(2, 3).ToArray
'
'Amargasaurus
'Tyrannosaurus
'Deinonychus

備註

專案會被移除, 且在中List<T>後面的所有元素, 都會count降低其索引。The items are removed and all the elements following them in the List<T> have their indexes reduced by count.

這個方法是 O (n) 運算, 其中nCountThis method is an O(n) operation, where n is Count.

適用於

另請參閱