Stopwatch.ElapsedMilliseconds 屬性

定義

取得目前執行個體所測量的已耗用時間總和,以毫秒為單位。Gets the total elapsed time measured by the current instance, in milliseconds.

public:
 property long ElapsedMilliseconds { long get(); };
public long ElapsedMilliseconds { get; }
member this.ElapsedMilliseconds : int64
Public ReadOnly Property ElapsedMilliseconds As Long

屬性值

Int64

表示目前執行個體所測量之毫秒總數的唯讀長整數 (Long Integer)。A read-only long integer representing the total number of milliseconds measured by the current instance.

範例

下列範例會使用 Stopwatch 類別來測量四種不同的效能,以剖析字串中的整數。The following example uses the Stopwatch class to measure the performance of four different implementations for parsing an integer from a string. 這個程式碼範例是針對類別提供之較大範例的一部分 StopwatchThis code example is part of a larger example provided for the Stopwatch class.

void TimeOperations()
{
   Int64 nanosecPerTick = (1000L * 1000L * 1000L) / Stopwatch::Frequency;
   const long numIterations = 10000;
   
   // Define the operation title names.
   array<String^>^operationNames = {"Operation: Int32.Parse(\"0\")","Operation: Int32.TryParse(\"0\")","Operation: Int32.Parse(\"a\")","Operation: Int32.TryParse(\"a\")"};
   
   // Time four different implementations for parsing 
   // an integer from a string. 
   for ( int operation = 0; operation <= 3; operation++ )
   {
      // Define variables for operation statistics.
      Int64 numTicks = 0;
      Int64 numRollovers = 0;
      Int64 maxTicks = 0;
      Int64 minTicks = Int64::MaxValue;
      int indexFastest = -1;
      int indexSlowest = -1;
      Int64 milliSec = 0;
      Stopwatch ^ time10kOperations = Stopwatch::StartNew();
      
      // Run the current operation 10001 times.
      // The first execution time will be tossed
      // out, since it can skew the average time.
      for ( int i = 0; i <= numIterations; i++ )
      {
         Int64 ticksThisTime = 0;
         int inputNum;
         Stopwatch ^ timePerParse;
         switch ( operation )
         {
            case 0:
               
               // Parse a valid integer using
               // a try-catch statement.
               // Start a new stopwatch timer.
               timePerParse = Stopwatch::StartNew();
               try
               {
                  inputNum = Int32::Parse( "0" );
               }
               catch ( FormatException^ ) 
               {
                  inputNum = 0;
               }

               // Stop the timer, and save the
               // elapsed ticks for the operation.
               timePerParse->Stop();
               ticksThisTime = timePerParse->ElapsedTicks;
               break;

            case 1:
               
               // Parse a valid integer using
               // the TryParse statement.
               // Start a new stopwatch timer.
               timePerParse = Stopwatch::StartNew();
               if (  !Int32::TryParse( "0", inputNum ) )
               {
                  inputNum = 0;
               }
               
               // Stop the timer, and save the
               // elapsed ticks for the operation.
               timePerParse->Stop();
               ticksThisTime = timePerParse->ElapsedTicks;
               break;

            case 2:
               
               // Parse an invalid value using
               // a try-catch statement.
               // Start a new stopwatch timer.
               timePerParse = Stopwatch::StartNew();
               try
               {
                  inputNum = Int32::Parse( "a" );
               }
               catch ( FormatException^ ) 
               {
                  inputNum = 0;
               }

               // Stop the timer, and save the
               // elapsed ticks for the operation.
               timePerParse->Stop();
               ticksThisTime = timePerParse->ElapsedTicks;
               break;

            case 3:
               
               // Parse an invalid value using
               // the TryParse statement.
               // Start a new stopwatch timer.
               timePerParse = Stopwatch::StartNew();
               if (  !Int32::TryParse( "a", inputNum ) )
               {
                  inputNum = 0;
               }
               
               // Stop the timer, and save the
               // elapsed ticks for the operation.
               timePerParse->Stop();
               ticksThisTime = timePerParse->ElapsedTicks;
               break;

            default:
               break;
         }

         // Skip over the time for the first operation,
         // just in case it caused a one-time
         // performance hit.
         if ( i == 0 )
         {
            time10kOperations->Reset();
            time10kOperations->Start();
         }
         else
         {
            // Update operation statistics
            // for iterations 1-10001.
            if ( maxTicks < ticksThisTime )
            {
               indexSlowest = i;
               maxTicks = ticksThisTime;
            }
            if ( minTicks > ticksThisTime )
            {
               indexFastest = i;
               minTicks = ticksThisTime;
            }
            numTicks += ticksThisTime;
            if ( numTicks < ticksThisTime )
            {
               // Keep track of rollovers.
               numRollovers++;
            }
         }
      }
      
      // Display the statistics for 10000 iterations.
      time10kOperations->Stop();
      milliSec = time10kOperations->ElapsedMilliseconds;
      Console::WriteLine();
      Console::WriteLine( "{0} Summary:", operationNames[ operation ] );
      Console::WriteLine( "  Slowest time:  #{0}/{1} = {2} ticks", indexSlowest, numIterations, maxTicks );
      Console::WriteLine( "  Fastest time:  #{0}/{1} = {2} ticks", indexFastest, numIterations, minTicks );
      Console::WriteLine( "  Average time:  {0} ticks = {1} nanoseconds", numTicks / numIterations, (numTicks * nanosecPerTick) / numIterations );
      Console::WriteLine( "  Total time looping through {0} operations: {1} milliseconds", numIterations, milliSec );

   }
}
private static void TimeOperations()
{
    long nanosecPerTick = (1000L*1000L*1000L) / Stopwatch.Frequency;
    const long numIterations = 10000;

    // Define the operation title names.
    String [] operationNames = {"Operation: Int32.Parse(\"0\")",
                                   "Operation: Int32.TryParse(\"0\")",
                                   "Operation: Int32.Parse(\"a\")",
                                   "Operation: Int32.TryParse(\"a\")"};

    // Time four different implementations for parsing
    // an integer from a string.

    for (int operation = 0; operation <= 3; operation++)
    {
        // Define variables for operation statistics.
        long numTicks = 0;
        long numRollovers = 0;
        long maxTicks = 0;
        long minTicks = Int64.MaxValue;
        int indexFastest = -1;
        int indexSlowest = -1;
        long milliSec = 0;

        Stopwatch time10kOperations = Stopwatch.StartNew();

        // Run the current operation 10001 times.
        // The first execution time will be tossed
        // out, since it can skew the average time.

        for (int i=0; i<=numIterations; i++)
        {
            long ticksThisTime = 0;
            int inputNum;
            Stopwatch timePerParse;

            switch (operation)
            {
                case 0:
                    // Parse a valid integer using
                    // a try-catch statement.

                    // Start a new stopwatch timer.
                    timePerParse = Stopwatch.StartNew();

                    try
                    {
                        inputNum = Int32.Parse("0");
                    }
                    catch (FormatException)
                    {
                        inputNum = 0;
                    }

                    // Stop the timer, and save the
                    // elapsed ticks for the operation.

                    timePerParse.Stop();
                    ticksThisTime = timePerParse.ElapsedTicks;
                    break;
                case 1:
                    // Parse a valid integer using
                    // the TryParse statement.

                    // Start a new stopwatch timer.
                    timePerParse = Stopwatch.StartNew();

                    if (!Int32.TryParse("0", out inputNum))
                    {
                        inputNum = 0;
                    }

                    // Stop the timer, and save the
                    // elapsed ticks for the operation.
                    timePerParse.Stop();
                    ticksThisTime = timePerParse.ElapsedTicks;
                    break;
                case 2:
                    // Parse an invalid value using
                    // a try-catch statement.

                    // Start a new stopwatch timer.
                    timePerParse = Stopwatch.StartNew();

                    try
                    {
                        inputNum = Int32.Parse("a");
                    }
                    catch (FormatException)
                    {
                        inputNum = 0;
                    }

                    // Stop the timer, and save the
                    // elapsed ticks for the operation.
                    timePerParse.Stop();
                    ticksThisTime = timePerParse.ElapsedTicks;
                    break;
                case 3:
                    // Parse an invalid value using
                    // the TryParse statement.

                    // Start a new stopwatch timer.
                    timePerParse = Stopwatch.StartNew();

                    if (!Int32.TryParse("a", out inputNum))
                    {
                        inputNum = 0;
                    }

                    // Stop the timer, and save the
                    // elapsed ticks for the operation.
                    timePerParse.Stop();
                    ticksThisTime = timePerParse.ElapsedTicks;
                    break;

                default:
                    break;
            }

            // Skip over the time for the first operation,
            // just in case it caused a one-time
            // performance hit.
            if (i == 0)
            {
                time10kOperations.Reset();
                time10kOperations.Start();
            }
            else
            {

                // Update operation statistics
                // for iterations 1-10000.
                if (maxTicks < ticksThisTime)
                {
                    indexSlowest = i;
                    maxTicks = ticksThisTime;
                }
                if (minTicks > ticksThisTime)
                {
                    indexFastest = i;
                    minTicks = ticksThisTime;
                }
                numTicks += ticksThisTime;
                if (numTicks < ticksThisTime)
                {
                    // Keep track of rollovers.
                    numRollovers ++;
                }
            }
        }

        // Display the statistics for 10000 iterations.

        time10kOperations.Stop();
        milliSec = time10kOperations.ElapsedMilliseconds;

        Console.WriteLine();
        Console.WriteLine("{0} Summary:", operationNames[operation]);
        Console.WriteLine("  Slowest time:  #{0}/{1} = {2} ticks",
            indexSlowest, numIterations, maxTicks);
        Console.WriteLine("  Fastest time:  #{0}/{1} = {2} ticks",
            indexFastest, numIterations, minTicks);
        Console.WriteLine("  Average time:  {0} ticks = {1} nanoseconds",
            numTicks / numIterations,
            (numTicks * nanosecPerTick) / numIterations );
        Console.WriteLine("  Total time looping through {0} operations: {1} milliseconds",
            numIterations, milliSec);
    }
}
   Private Shared Sub TimeOperations()

      Dim nanosecPerTick As Long = 1000000000 / Stopwatch.Frequency
      Const numIterations As Long = 10000
      
      ' Define the operation title names.
      Dim operationNames As String() =  _
        {"Operation: Int32.Parse(""0"")", _
         "Operation: Int32.TryParse(""0"")", _
         "Operation: Int32.Parse(""a"")", _
         "Operation: Int32.TryParse(""a"")"}
      
      ' Time four different implementations for parsing 
      ' an integer from a string. 

      Dim operation As Integer
      For operation = 0 To 3
         ' Define variables for operation statistics.
         Dim numTicks As Long = 0
         Dim numRollovers As Long = 0
         Dim maxTicks As Long = 0
         Dim minTicks As Long = Int64.MaxValue
         Dim indexFastest As Integer = - 1
         Dim indexSlowest As Integer = - 1
         Dim milliSec As Long = 0
         
         Dim time10kOperations As Stopwatch = Stopwatch.StartNew()
         
         ' Run the current operation 10001 times.
         ' The first execution time will be tossed
         ' out, since it can skew the average time.
         Dim i As Integer
         For i = 0 To numIterations
            Dim ticksThisTime As Long = 0
            Dim inputNum As Integer
            Dim timePerParse As Stopwatch
            
            Select Case operation
               Case 0
                  ' Parse a valid integer using
                  ' a try-catch statement.
                  ' Start a new stopwatch timer.
                  timePerParse = Stopwatch.StartNew()
                  
                  Try
                     inputNum = Int32.Parse("0")
                  Catch e As FormatException
                     inputNum = 0
                  End Try
                  
                  ' Stop the timer, and save the
                  ' elapsed ticks for the operation.
                  timePerParse.Stop()
                  ticksThisTime = timePerParse.ElapsedTicks
               Case 1
                  ' Parse a valid integer using
                  ' the TryParse statement.
                  ' Start a new stopwatch timer.
                  timePerParse = Stopwatch.StartNew()
                  
                  If Not Int32.TryParse("0", inputNum) Then
                     inputNum = 0
                  End If
                  
                  ' Stop the timer, and save the
                  ' elapsed ticks for the operation.
                  timePerParse.Stop()
                  ticksThisTime = timePerParse.ElapsedTicks
               Case 2
                  ' Parse an invalid value using
                  ' a try-catch statement.
                  ' Start a new stopwatch timer.
                  timePerParse = Stopwatch.StartNew()
                  
                  Try
                     inputNum = Int32.Parse("a")
                  Catch e As FormatException
                     inputNum = 0
                  End Try
                  
                  ' Stop the timer, and save the
                  ' elapsed ticks for the operation.
                  timePerParse.Stop()
                  ticksThisTime = timePerParse.ElapsedTicks
               Case 3
                  ' Parse an invalid value using
                  ' the TryParse statement.
                  ' Start a new stopwatch timer.
                  timePerParse = Stopwatch.StartNew()
                  
                  If Not Int32.TryParse("a", inputNum) Then
                     inputNum = 0
                  End If
                  
                  ' Stop the timer, and save the
                  ' elapsed ticks for the operation.
                  timePerParse.Stop()
                  ticksThisTime = timePerParse.ElapsedTicks
               
               Case Else
            End Select
            
            ' Skip over the time for the first operation,
            ' just in case it caused a one-time
            ' performance hit.
            If i = 0 Then
               time10kOperations.Reset()
               time10kOperations.Start()
            Else
               
               ' Update operation statistics
               ' for iterations 1-10001.
               If maxTicks < ticksThisTime Then
                  indexSlowest = i
                  maxTicks = ticksThisTime
               End If
               If minTicks > ticksThisTime Then
                  indexFastest = i
                  minTicks = ticksThisTime
               End If
               numTicks += ticksThisTime
               If numTicks < ticksThisTime Then
                  ' Keep track of rollovers.
                  numRollovers += 1
               End If
            End If
         Next i
         
         ' Display the statistics for 10000 iterations.
         time10kOperations.Stop()
         milliSec = time10kOperations.ElapsedMilliseconds
         
         Console.WriteLine()
         Console.WriteLine("{0} Summary:", operationNames(operation))
         Console.WriteLine("  Slowest time:  #{0}/{1} = {2} ticks", _
            indexSlowest, numIterations, maxTicks)
         Console.WriteLine("  Fastest time:  #{0}/{1} = {2} ticks", _
            indexFastest, numIterations, minTicks)
         Console.WriteLine("  Average time:  {0} ticks = {1} nanoseconds", _
            numTicks / numIterations, numTicks * nanosecPerTick / numIterations)
         Console.WriteLine("  Total time looping through {0} operations: {1} milliseconds", _
            numIterations, milliSec)
      Next operation

   End Sub
End Class

備註

此屬性代表將經過的時間四捨五入到最接近的整數毫秒值。This property represents elapsed time rounded down to the nearest whole millisecond value. 如需更高的精確度度量,請使用 ElapsedElapsedTicks 屬性。For higher precision measurements, use the Elapsed or ElapsedTicks properties.

您可以在 Elapsed ElapsedMilliseconds ElapsedTicks 實例正在執行或停止時,查詢屬性、和 StopwatchYou can query the properties Elapsed, ElapsedMilliseconds, and ElapsedTicks while the Stopwatch instance is running or stopped. 已耗用的時間屬性會在執行時穩定增加, Stopwatch 當實例停止時,它們會維持不變。The elapsed time properties steadily increase while the Stopwatch is running; they remain constant when the instance is stopped.

根據預設,實例的經過時間值 Stopwatch 等於所有測量時間間隔的總計。By default, the elapsed time value of a Stopwatch instance equals the total of all measured time intervals. 每次呼叫都會 Start 在累積的經過時間開始計算,每次呼叫都會 Stop 結束目前的間隔測量,並凍結累積的經過時間值。Each call to Start begins counting at the cumulative elapsed time; each call to Stop ends the current interval measurement and freezes the cumulative elapsed time value. Reset 可以使用方法來清除現有實例中的累積耗用時間 StopwatchUse the Reset method to clear the cumulative elapsed time in an existing Stopwatch instance.

適用於

另請參閱