AbandonedMutexException 類別

定義

當一個執行緒取得另一個執行緒已放棄,但是結束時並未釋放的 Mutex 物件時,所擲回的例外狀況。

public ref class AbandonedMutexException : Exception
public ref class AbandonedMutexException : SystemException
public class AbandonedMutexException : Exception
public class AbandonedMutexException : SystemException
[System.Runtime.InteropServices.ComVisible(false)]
[System.Serializable]
public class AbandonedMutexException : SystemException
type AbandonedMutexException = class
    inherit Exception
type AbandonedMutexException = class
    inherit SystemException
[<System.Runtime.InteropServices.ComVisible(false)>]
[<System.Serializable>]
type AbandonedMutexException = class
    inherit SystemException
Public Class AbandonedMutexException
Inherits Exception
Public Class AbandonedMutexException
Inherits SystemException
繼承
AbandonedMutexException
繼承
AbandonedMutexException
屬性

範例

下列程式碼範例會執行放棄五個 Mutex 的執行緒,示範其對 、 WaitAnyWaitAll 方法的影響 WaitOne 。 屬性的值 MutexIndex 會針對 WaitAny 呼叫顯示。

注意

對 方法的 WaitAny 呼叫會由其中一個已放棄的 Mutex 中斷。 另一個已放棄的 mutex 仍 AbandonedMutexException 可能導致後續等候方法擲回 。

using namespace System;
using namespace System::Threading;

namespace SystemThreadingExample
{
    public ref class Example
    {
    private:
        static ManualResetEvent^ dummyEvent = 
            gcnew ManualResetEvent(false);
            
        static Mutex^ orphanMutex1 = gcnew Mutex;
        static Mutex^ orphanMutex2 = gcnew Mutex;
        static Mutex^ orphanMutex3 = gcnew Mutex;
        static Mutex^ orphanMutex4 = gcnew Mutex;
        static Mutex^ orphanMutex5 = gcnew Mutex;
        
    public:
        static void ProduceAbandonMutexException(void)
        {
            
            // Start a thread that grabs all five mutexes, and then
            // abandons them.
            Thread^ abandonThread = 
                gcnew Thread(gcnew ThreadStart(AbandonMutex));

            abandonThread->Start();
            
            // Make sure the thread is finished.
            abandonThread->Join();
            
            // Wait on one of the abandoned mutexes. The WaitOne
            // throws an AbandonedMutexException.
            try
            {
                orphanMutex1->WaitOne();
                Console::WriteLine("WaitOne succeeded.");
            }
            catch (AbandonedMutexException^ ex) 
            {
                Console::WriteLine("Exception in WaitOne: {0}", 
                    ex->Message);
            }
            finally
            {
                
                // Whether or not the exception was thrown, 
                // the current thread owns the mutex, and 
                // must release it.
                orphanMutex1->ReleaseMutex();
            }

            
            // Create an array of wait handles, consisting of one
            // ManualResetEvent and two mutexes, using two more of
            // the abandoned mutexes.
            array <WaitHandle^>^ waitFor = {dummyEvent, 
                orphanMutex2, orphanMutex3};
            
            // WaitAny returns when any of the wait handles in the 
            // array is signaled. Either of the two abandoned mutexes
            // satisfy the wait, but lower of the two index values is
            // returned by MutexIndex. Note that the Try block and
            // the Catch block obtain the index in different ways.
            try
            {
                int index = WaitHandle::WaitAny(waitFor);
                Console::WriteLine("WaitAny succeeded.");
                (safe_cast<Mutex^>(waitFor[index]))->ReleaseMutex();
            }
            catch (AbandonedMutexException^ ex) 
            {
                Console::WriteLine("Exception in WaitAny at index {0}"
                    "\r\n\tMessage: {1}", ex->MutexIndex, 
                    ex->Message);
                (safe_cast<Mutex^>(waitFor[ex->MutexIndex]))->
                    ReleaseMutex();
            }

            orphanMutex3->ReleaseMutex();
            
            // Use two more of the abandoned mutexes for the WaitAll 
            // call. WaitAll doesn't return until all wait handles 
            // are signaled, so the ManualResetEvent must be signaled 
            // by calling Set().
            dummyEvent->Set();
            waitFor[1] = orphanMutex4;
            waitFor[2] = orphanMutex5;
            
            // Because WaitAll requires all the wait handles to be
            // signaled, both mutexes must be released even if the
            // exception is thrown. Thus, the ReleaseMutex calls are 
            // placed in the Finally block. Again, MutexIndex returns
            // the lower of the two index values for the abandoned
            // mutexes.
            //  
            try
            {
                WaitHandle::WaitAll(waitFor);
                Console::WriteLine("WaitAll succeeded.");
            }
            catch (AbandonedMutexException^ ex) 
            {
                Console::WriteLine("Exception in WaitAny at index {0}"
                    "\r\n\tMessage: {1}", ex->MutexIndex, 
                    ex->Message);
            }
            finally
            {
                orphanMutex4->ReleaseMutex();
                orphanMutex5->ReleaseMutex();
            }

        }


    private:
        [MTAThread]
        static void AbandonMutex()
        {
            orphanMutex1->WaitOne();
            orphanMutex2->WaitOne();
            orphanMutex3->WaitOne();
            orphanMutex4->WaitOne();
            orphanMutex5->WaitOne();
            Console::WriteLine(
                "Thread exits without releasing the mutexes.");
        }
    };   
}

//Entry point of example application
[MTAThread]
int main(void)
{
    SystemThreadingExample::Example::ProduceAbandonMutexException();
}

// This code example produces the following output:
// Thread exits without releasing the mutexes.
// Exception in WaitOne: The wait completed due to an abandoned mutex.
// Exception in WaitAny at index 1
//         Message: The wait completed due to an abandoned mutex.
// Exception in WaitAll at index -1
//         Message: The wait completed due to an abandoned mutex.

using System;
using System.Threading;

public class Example
{
    private static ManualResetEvent _dummy = new ManualResetEvent(false);

    private static Mutex _orphan1 = new Mutex();
    private static Mutex _orphan2 = new Mutex();
    private static Mutex _orphan3 = new Mutex();
    private static Mutex _orphan4 = new Mutex();
    private static Mutex _orphan5 = new Mutex();

    [MTAThread]
    public static void Main()
    {
        // Start a thread that takes all five mutexes, and then
        // ends without releasing them.
        //
        Thread t = new Thread(new ThreadStart(AbandonMutex));
        t.Start();
        // Make sure the thread is finished.
        t.Join();

        // Wait on one of the abandoned mutexes. The WaitOne returns
        // immediately, because its wait condition is satisfied by
        // the abandoned mutex, but on return it throws
        // AbandonedMutexException.
        try
        {
            _orphan1.WaitOne();
            Console.WriteLine("WaitOne succeeded.");
        }
        catch(AbandonedMutexException ex)
        {
            Console.WriteLine("Exception on return from WaitOne." +
                "\r\n\tMessage: {0}", ex.Message);
        }
        finally
        {
            // Whether or not the exception was thrown, the current
            // thread owns the mutex, and must release it.
            //
            _orphan1.ReleaseMutex();
        }

        // Create an array of wait handles, consisting of one
        // ManualResetEvent and two mutexes, using two more of the
        // abandoned mutexes.
        WaitHandle[] waitFor = {_dummy, _orphan2, _orphan3};

        // WaitAny returns when any of the wait handles in the 
        // array is signaled, so either of the two abandoned mutexes
        // satisfy its wait condition. On returning from the wait,
        // WaitAny throws AbandonedMutexException. The MutexIndex
        // property returns the lower of the two index values for 
        // the abandoned mutexes. Note that the Try block and the
        // Catch block obtain the index in different ways.
        //  
        try
        {
            int index = WaitHandle.WaitAny(waitFor);
            Console.WriteLine("WaitAny succeeded.");

            // The current thread owns the mutex, and must release
            // it.
            Mutex m = waitFor[index] as Mutex;
            if (m != null) m.ReleaseMutex();
        }
        catch(AbandonedMutexException ex)
        {
            Console.WriteLine("Exception on return from WaitAny at index {0}." +
                "\r\n\tMessage: {1}", ex.MutexIndex, ex.Message);

            // Whether or not the exception was thrown, the current
            // thread owns the mutex, and must release it.
            //
            if (ex.Mutex != null) ex.Mutex.ReleaseMutex();
        }

        // Use two more of the abandoned mutexes for the WaitAll call.
        // WaitAll doesn't return until all wait handles are signaled,
        // so the ManualResetEvent must be signaled by calling Set().
        _dummy.Set();
        waitFor[1] = _orphan4;
        waitFor[2] = _orphan5;

        // The signaled event and the two abandoned mutexes satisfy
        // the wait condition for WaitAll, but on return it throws
        // AbandonedMutexException. For WaitAll, the MutexIndex
        // property is always -1 and the Mutex property is always
        // null.
        //  
        try
        {
            WaitHandle.WaitAll(waitFor);
            Console.WriteLine("WaitAll succeeded.");
        }
        catch(AbandonedMutexException ex)
        {
            Console.WriteLine("Exception on return from WaitAll. MutexIndex = {0}." +
                "\r\n\tMessage: {1}", ex.MutexIndex, ex.Message);
        }
        finally
        {
            // Whether or not the exception was thrown, the current
            // thread owns the mutexes, and must release them.
            //
            _orphan4.ReleaseMutex();
            _orphan5.ReleaseMutex();
        }
    }

    [MTAThread]
    public static void AbandonMutex()
    {
        _orphan1.WaitOne();
        _orphan2.WaitOne();
        _orphan3.WaitOne();
        _orphan4.WaitOne();
        _orphan5.WaitOne();
        // Abandon the mutexes by exiting without releasing them.
        Console.WriteLine("Thread exits without releasing the mutexes.");
    }
}

/* This code example produces the following output:

Thread exits without releasing the mutexes.
Exception on return from WaitOne.
        Message: The wait completed due to an abandoned mutex.
Exception on return from WaitAny at index 1.
        Message: The wait completed due to an abandoned mutex.
Exception on return from WaitAll. MutexIndex = -1.
        Message: The wait completed due to an abandoned mutex.
 */
Option Explicit
Imports System.Threading

Public Class Example
    Private Shared _dummy As New ManualResetEvent(False)

    Private Shared _orphan1 As New Mutex()
    Private Shared _orphan2 As New Mutex()
    Private Shared _orphan3 As New Mutex()
    Private Shared _orphan4 As New Mutex()
    Private Shared _orphan5 As New Mutex()

    <MTAThread> _
    Public Shared Sub Main()
        ' Start a thread that takes all five mutexes, and then
        ' ends without releasing them.
        '
        Dim t As New Thread(AddressOf AbandonMutex)
        t.Start()
        ' Make sure the thread is finished.
        t.Join()

        ' Wait on one of the abandoned mutexes. The WaitOne returns
        ' immediately, because its wait condition is satisfied by
        ' the abandoned mutex, but on return it throws
        ' AbandonedMutexException.
        Try
            _orphan1.WaitOne()
            Console.WriteLine("WaitOne succeeded.")
        Catch ex As AbandonedMutexException
            Console.WriteLine("Exception on return from WaitOne." _
                & vbCrLf & vbTab & "Message: " _
                & ex.Message) 
        Finally
            ' Whether or not the exception was thrown, the current
            ' thread owns the mutex, and must release it.
            '
            _orphan1.ReleaseMutex()
        End Try

        ' Create an array of wait handles, consisting of one
        ' ManualResetEvent and two mutexes, using two more of the
        ' abandoned mutexes.
        Dim waitFor(2) As WaitHandle
        waitFor(0) = _dummy
        waitFor(1) = _orphan2
        waitFor(2) = _orphan3

        ' WaitAny returns when any of the wait handles in the 
        ' array is signaled, so either of the two abandoned mutexes
        ' satisfy its wait condition. On returning from the wait,
        ' WaitAny throws AbandonedMutexException. The MutexIndex
        ' property returns the lower of the two index values for 
        ' the abandoned mutexes. Note that the Try block and the
        ' Catch block obtain the index in different ways.
        '  
        Try
            Dim index As Integer = WaitHandle.WaitAny(waitFor)
            Console.WriteLine("WaitAny succeeded.")

            Dim m As Mutex = TryCast(waitFor(index), Mutex)

            ' The current thread owns the mutex, and must release
            ' it.
            If m IsNot Nothing Then m.ReleaseMutex()
        Catch ex As AbandonedMutexException
            Console.WriteLine("Exception on return from WaitAny at index " _
                & ex.MutexIndex & "." _
                & vbCrLf & vbTab & "Message: " _
                & ex.Message) 

            ' Whether or not the exception was thrown, the current
            ' thread owns the mutex, and must release it.
            '
            If ex.Mutex IsNot Nothing Then ex.Mutex.ReleaseMutex()            
        End Try

        ' Use two more of the abandoned mutexes for the WaitAll call.
        ' WaitAll doesn't return until all wait handles are signaled,
        ' so the ManualResetEvent must be signaled by calling Set(). 
        _dummy.Set()
        waitFor(1) = _orphan4
        waitFor(2) = _orphan5

        ' The signaled event and the two abandoned mutexes satisfy
        ' the wait condition for WaitAll, but on return it throws
        ' AbandonedMutexException. For WaitAll, the MutexIndex
        ' property is always -1 and the Mutex property is always
        ' Nothing.
        '  
        Try
            WaitHandle.WaitAll(waitFor)
            Console.WriteLine("WaitAll succeeded.")
        Catch ex As AbandonedMutexException
            Console.WriteLine("Exception on return from WaitAll. MutexIndex = " _
                & ex.MutexIndex & "." _
                & vbCrLf & vbTab & "Message: " _
                & ex.Message) 
        Finally
            ' Whether or not the exception was thrown, the current
            ' thread owns the mutexes, and must release them.
            '
            CType(waitFor(1), Mutex).ReleaseMutex()
            CType(waitFor(2), Mutex).ReleaseMutex()
        End Try
    End Sub

    <MTAThread> _
    Public Shared Sub AbandonMutex()
        _orphan1.WaitOne()
        _orphan2.WaitOne()
        _orphan3.WaitOne()
        _orphan4.WaitOne()
        _orphan5.WaitOne()
        ' Abandon the mutexes by exiting without releasing them.
        Console.WriteLine("Thread exits without releasing the mutexes.")
    End Sub
End Class

' This code example produces the following output:
'
'Thread exits without releasing the mutexes.
'Exception on return from WaitOne.
'        Message: The wait completed due to an abandoned mutex.
'Exception on return from WaitAny at index 1.
'        Message: The wait completed due to an abandoned mutex.
'Exception on return from WaitAll. MutexIndex = -1.
'        Message: The wait completed due to an abandoned mutex.

備註

當執行緒放棄 Mutex 時,會在取得 mutex 的下一個執行緒中擲回例外狀況。 執行緒可能會取得 mutex,因為其已經在等候 Mutex,或因為稍後進入 mutex。

放棄的 Mutex 表示嚴重的程式設計錯誤。 當執行緒結束而不釋放 Mutex 時,受 mutex 保護的資料結構可能不是一致的狀態。 在 2.0 版.NET Framework之前,這類問題很難探索,因為當放棄的 Mutex 導致等候完成時,不會擲回任何例外狀況。 如需詳細資訊,請參閱 Mutex 類別。

要求 Mutex 擁有權的下一個執行緒可以處理此例外狀況並繼續,前提是可以驗證資料結構的完整性。

建構函式

AbandonedMutexException()

使用預設值,初始化 AbandonedMutexException 類別的新執行個體。

AbandonedMutexException(Int32, WaitHandle)

使用已放棄 Mutex 的指定索引 (若適用的話) 以及表示此 Mutex 的 AbandonedMutexException 物件,初始化 Mutex 類別的新執行個體 。

AbandonedMutexException(SerializationInfo, StreamingContext)

使用序列化資料,初始化 AbandonedMutexException 類別的新執行個體。

AbandonedMutexException(String)

使用指定的錯誤訊息,初始化 AbandonedMutexException 類別的新執行個體。

AbandonedMutexException(String, Exception)

使用指定的錯誤訊息和內部例外狀況初始化 AbandonedMutexException 類別的新執行個體。

AbandonedMutexException(String, Exception, Int32, WaitHandle)

使用指定的錯誤訊息、內部例外狀況、已放棄 Mutex 的索引 (若適用的話),以及表示此 Mutex 的 AbandonedMutexException 物件,初始化 Mutex 類別的新執行個體。

AbandonedMutexException(String, Int32, WaitHandle)

以指定的錯誤訊息、已放棄 Mutex 的索引 (若適用的話) 以及放棄的 Mutex 初始化 AbandonedMutexException 類別的新執行個體。

屬性

Data

取得鍵值組的集合,這些鍵值組會提供關於例外狀況的其他使用者定義資訊。

(繼承來源 Exception)
HelpLink

取得或設定與這個例外狀況相關聯的說明檔連結。

(繼承來源 Exception)
HResult

取得或設定 HRESULT,它是指派給特定例外狀況的編碼數值。

(繼承來源 Exception)
InnerException

取得造成目前例外狀況的 Exception 執行個體。

(繼承來源 Exception)
Message

取得描述目前例外狀況的訊息。

(繼承來源 Exception)
Mutex

取得造成例外狀況的已放棄 Mutex (若為已知)。

MutexIndex

取得造成例外狀況之已放棄 Mutex 的索引 (若為已知)。

Source

取得或設定造成錯誤的應用程式或物件的名稱。

(繼承來源 Exception)
StackTrace

取得呼叫堆疊上即時運算框架的字串表示。

(繼承來源 Exception)
TargetSite

取得擲回目前例外狀況的方法。

(繼承來源 Exception)

方法

Equals(Object)

判斷指定的物件是否等於目前的物件。

(繼承來源 Object)
GetBaseException()

在衍生類別中覆寫時,傳回一或多個後續的例外狀況的根本原因 Exception

(繼承來源 Exception)
GetHashCode()

做為預設雜湊函式。

(繼承來源 Object)
GetObjectData(SerializationInfo, StreamingContext)

在衍生類別中覆寫時,使用例外狀況的資訊設定 SerializationInfo

(繼承來源 Exception)
GetType()

取得目前執行個體的執行階段類型。

(繼承來源 Exception)
MemberwiseClone()

建立目前 Object 的淺層複製。

(繼承來源 Object)
ToString()

建立並傳回目前例外狀況的字串表示。

(繼承來源 Exception)

事件

SerializeObjectState
已過時。

當例外狀況序列化,以建立包含例外狀況相關序列化資料的例外狀況狀態物件時,就會發生此事件。

(繼承來源 Exception)

適用於

另請參閱