Mutex.ReleaseMutex 方法

參考

定義

命名空間:: System.Threading

組件:: System.Threading.dll

組件:: mscorlib.dll

組件:: netstandard.dll

重要

部分資訊涉及發行前產品，在發行之前可能會有大幅修改。 Microsoft 對此處提供的資訊，不做任何明確或隱含的瑕疵擔保。

釋出 Mutex 一次。

public:
 void ReleaseMutex();

public void ReleaseMutex ();

member this.ReleaseMutex : unit -> unit

Public Sub ReleaseMutex ()

例外狀況

ApplicationException

呼叫端執行緒未擁有 Mutex。

ObjectDisposedException

目前的執行個體已經過處置。

範例

下列範例示範如何使用本機 Mutex 物件來同步存取受保護的資源。建立 Mutex 的執行緒一開始不會擁有它。 ReleaseMutex方法可用來釋出不再需要 Mutex。

// This example shows how a Mutex is used to synchronize access
// to a protected resource. Unlike Monitor, Mutex can be used with
// WaitHandle.WaitAll and WaitAny, and can be passed across
// AppDomain boundaries.
using namespace System;
using namespace System::Threading;
const int numIterations = 1;
const int numThreads = 3;
ref class Test
{
public:

   // Create a new Mutex. The creating thread does not own the
   // Mutex.
   static Mutex^ mut = gcnew Mutex;
   static void MyThreadProc()
   {
      for ( int i = 0; i < numIterations; i++ )
      {
         UseResource();

      }
   }


private:

   // This method represents a resource that must be synchronized
   // so that only one thread at a time can enter.
   static void UseResource()
   {
      
      //Wait until it is OK to enter.
      mut->WaitOne();
      Console::WriteLine( "{0} has entered protected the area", Thread::CurrentThread->Name );
      
      // Place code to access non-reentrant resources here.
      // Simulate some work.
      Thread::Sleep( 500 );
      Console::WriteLine( "{0} is leaving protected the area\r\n", Thread::CurrentThread->Name );
      
      // Release the Mutex.
      mut->ReleaseMutex();
   }

};

int main()
{
   
   // Create the threads that will use the protected resource.
   for ( int i = 0; i < numThreads; i++ )
   {
      Thread^ myThread = gcnew Thread( gcnew ThreadStart( Test::MyThreadProc ) );
      myThread->Name = String::Format( "Thread {0}", i + 1 );
      myThread->Start();

   }
   
   // The main thread exits, but the application continues to 
   // run until all foreground threads have exited.
}

// This example shows how a Mutex is used to synchronize access
// to a protected resource. Unlike Monitor, Mutex can be used with
// WaitHandle.WaitAll and WaitAny, and can be passed across
// AppDomain boundaries.
 
using System;
using System.Threading;

class Test13
{
    // Create a new Mutex. The creating thread does not own the
    // Mutex.
    private static Mutex mut = new Mutex();
    private const int numIterations = 1;
    private const int numThreads = 3;

    static void Main()
    {
        // Create the threads that will use the protected resource.
        for(int i = 0; i < numThreads; i++)
        {
            Thread myThread = new Thread(new ThreadStart(MyThreadProc));
            myThread.Name = String.Format("Thread{0}", i + 1);
            myThread.Start();
        }

        // The main thread exits, but the application continues to
        // run until all foreground threads have exited.
    }

    private static void MyThreadProc()
    {
        for(int i = 0; i < numIterations; i++)
        {
            UseResource();
        }
    }

    // This method represents a resource that must be synchronized
    // so that only one thread at a time can enter.
    private static void UseResource()
    {
        // Wait until it is safe to enter.
        mut.WaitOne();

        Console.WriteLine("{0} has entered the protected area", 
            Thread.CurrentThread.Name);

        // Place code to access non-reentrant resources here.

        // Simulate some work.
        Thread.Sleep(500);

        Console.WriteLine("{0} is leaving the protected area\r\n", 
            Thread.CurrentThread.Name);
         
        // Release the Mutex.
        mut.ReleaseMutex();
    }
}

' This example shows how a Mutex is used to synchronize access
' to a protected resource. Unlike Monitor, Mutex can be used with
' WaitHandle.WaitAll and WaitAny, and can be passed across
' AppDomain boundaries.
 
Imports System.Threading

Class Test
    ' Create a new Mutex. The creating thread does not own the
    ' Mutex.
    Private Shared mut As New Mutex()
    Private Const numIterations As Integer = 1
    Private Const numThreads As Integer = 3

    <MTAThread> _
    Shared Sub Main()
        ' Create the threads that will use the protected resource.
        Dim i As Integer
        For i = 1 To numThreads
            Dim myThread As New Thread(AddressOf MyThreadProc)
            myThread.Name = [String].Format("Thread{0}", i)
            myThread.Start()
        Next i

        ' The main thread exits, but the application continues to
        ' run until all foreground threads have exited.

    End Sub

    Private Shared Sub MyThreadProc()
        Dim i As Integer
        For i = 1 To numIterations
            UseResource()
        Next i
    End Sub

    ' This method represents a resource that must be synchronized
    ' so that only one thread at a time can enter.
    Private Shared Sub UseResource()
        ' Wait until it is safe to enter.
        mut.WaitOne()

        Console.WriteLine("{0} has entered protected area", _
            Thread.CurrentThread.Name)

        ' Place code to access non-reentrant resources here.

        ' Simulate some work
        Thread.Sleep(500)

        Console.WriteLine("{0} is leaving protected area" & vbCrLf, _
            Thread.CurrentThread.Name)

        ' Release Mutex.
        mut.ReleaseMutex()
    End Sub
End Class

備註

例如，每當執行緒取得 mutex (時，只要呼叫其 WaitOne 方法) ，就必須接著呼叫 ReleaseMutex 來撤銷 mutex 的擁有權，並解除封鎖嘗試取得 mutex 擁有權的其他執行緒。例如，如果嘗試取得 mutex 的擁有權失敗 (，當使用或參數呼叫 WaitOne 方法 millisecondsTimeout 時，因為要求逾時) ，執行緒不應該呼叫 ReleaseMutex ，在此情況下，執行緒也應該不允許存取 mutex 所保護的資源，如 false 下列範例所示。 timeout

using System;
using System.Threading;

class Example
{
    // Create a new Mutex. The creating thread does not own the mutex.
    private static Mutex mut = new Mutex();
    private const int numIterations = 1;
    private const int numThreads = 3;

    static void Main()
    {
        Example ex = new Example();
        ex.StartThreads();
    }

     private void StartThreads()
     {
        // Create the threads that will use the protected resource.
        for(int i = 0; i < numThreads; i++)
        {
            Thread newThread = new Thread(new ThreadStart(ThreadProc));
            newThread.Name = String.Format("Thread{0}", i + 1);
            newThread.Start();
        }

        // The main thread returns to Main and exits, but the application continues to
        // run until all foreground threads have exited.
    }

    private static void ThreadProc()
    {
        for(int i = 0; i < numIterations; i++)
        {
            UseResource();
        }
    }

    // This method represents a resource that must be synchronized
    // so that only one thread at a time can enter.
    private static void UseResource()
    {
        // Wait until it is safe to enter, and do not enter if the request times out.
        Console.WriteLine("{0} is requesting the mutex", Thread.CurrentThread.Name);
        if (mut.WaitOne(1000)) {
           Console.WriteLine("{0} has entered the protected area", 
               Thread.CurrentThread.Name);
   
           // Place code to access non-reentrant resources here.
   
           // Simulate some work.
           Thread.Sleep(5000);
   
           Console.WriteLine("{0} is leaving the protected area", 
               Thread.CurrentThread.Name);
   
           // Release the Mutex.
              mut.ReleaseMutex();
           Console.WriteLine("{0} has released the mutex", 
                             Thread.CurrentThread.Name);
        }
        else {
           Console.WriteLine("{0} will not acquire the mutex", 
                             Thread.CurrentThread.Name);
        }
    }

    ~Example()
    {
       mut.Dispose();
    }
}
// The example displays output like the following:
//       Thread1 is requesting the mutex
//       Thread1 has entered the protected area
//       Thread2 is requesting the mutex
//       Thread3 is requesting the mutex
//       Thread2 will not acquire the mutex
//       Thread3 will not acquire the mutex
//       Thread1 is leaving the protected area
//       Thread1 has released the mutex

Imports System.Threading

Class Example
   ' Create a new Mutex. The creating thread does not own the mutex.
   Private mut As New Mutex()
   Private Const numIterations As Integer = 1
   Private Const numThreads As Integer = 3

   Public Shared Sub Main()
      Dim ex As New Example()
      ex.StartThreads()
   End Sub
   
   Private Sub StartThreads()
        ' Create the threads that will use the protected resource.
        For i As Integer = 0 To numThreads - 1
            Dim newThread As New Thread(AddressOf ThreadProc)
            newThread.Name = String.Format("Thread{0}", i + 1)
            newThread.Start()
        Next

        ' The main thread returns to Main and exits, but the application continues to
        ' run until all foreground threads have exited.
   End Sub

   Private Sub ThreadProc()
        For i As Integer = 0 To numIterations - 1
            UseResource()
        Next
   End Sub

   ' This method represents a resource that must be synchronized
   ' so that only one thread at a time can enter.
   Private Sub UseResource()
        ' Wait until it is safe to enter.
        Console.WriteLine("{0} is requesting the mutex", 
                          Thread.CurrentThread.Name)
        If mut.WaitOne(1000) Then
           Console.WriteLine("{0} has entered the protected area", 
               Thread.CurrentThread.Name)
   
           ' Place code to access non-reentrant resources here.
   
           ' Simulate some work.
           Thread.Sleep(5000)
   
           Console.WriteLine("{0} is leaving the protected area", 
               Thread.CurrentThread.Name)
   
           ' Release the Mutex.
           mut.ReleaseMutex()
           Console.WriteLine("{0} has released the mutex", 
                             Thread.CurrentThread.Name)
        Else
           Console.WriteLine("{0} will not acquire the mutex", 
                             Thread.CurrentThread.Name)
        End If
   End Sub
   
   Protected Overrides Sub Finalize()
      mut.Dispose()
   End Sub
End Class
' The example displays output like the following:
'       Thread1 is requesting the mutex
'       Thread1 has entered the protected area
'       Thread2 is requesting the mutex
'       Thread3 is requesting the mutex
'       Thread2 will not acquire the mutex
'       Thread3 will not acquire the mutex
'       Thread1 is leaving the protected area
'       Thread1 has released the mutex

擁有 mutex 的執行緒可以在重複的等候函式呼叫中指定相同的 mutex，而不會封鎖其執行。 Common Language Runtime 會保留呼叫數目。執行緒必須呼叫 ReleaseMutex 相同的次數，才能釋放 mutex 的擁有權。

如果執行緒在擁有 Mutex 時終止，則會放棄 mutex。 Mutex 的狀態會設定為已發出訊號，而下一個等候執行緒會取得擁有權。如果沒有人擁有 mutex，則會發出 mutex 的狀態。從 .NET Framework 2.0 版開始， AbandonedMutexException 會在取得 mutex 的下一個執行緒中擲回。在 2.0 版.NET Framework之前，不會擲回例外狀況。

警告

放棄的 Mutex 通常表示程式碼中發生嚴重錯誤。當執行緒在未釋放 Mutex 的情況下結束時，受 mutex 保護的資料結構可能不是一致的狀態。要求 Mutex 擁有權的下一個執行緒可以處理此例外狀況，如果可以驗證資料結構的完整性，請繼續進行。

如果是全系統 Mutex，遭到放棄的 Mutex 可能表示應用程式已意外終止 (例如，透過使用「Windows 工作管理員」)。

適用於

Mutex.ReleaseMutex 方法

定義

例外狀況

範例

備註

適用於

另請參閱

其他資源