Application.ThreadException 事件

定義

發生於未被截取的執行緒擲回例外狀況 (Exception) 時。Occurs when an untrapped thread exception is thrown.

public:
 static event System::Threading::ThreadExceptionEventHandler ^ ThreadException;
public static event System.Threading.ThreadExceptionEventHandler ThreadException;
member this.ThreadException : System.Threading.ThreadExceptionEventHandler 
Public Shared Custom Event ThreadException As ThreadExceptionEventHandler 

範例

下列程式碼範例會針對 Windows Forms 執行緒上發生的例外狀況,以及在其他執行緒上發生的例外狀況,設定事件處理常式。The following code example sets event handlers for exceptions that occur on Windows Forms threads and exceptions that occur on other threads. 它會設定 SetUnhandledExceptionMode,讓應用程式處理所有例外狀況,而不論應用程式的使用者設定檔中的設定為何。It sets SetUnhandledExceptionMode so that all exceptions are handled by the application, regardless of the settings in the application's user configuration file. 它會使用 ThreadException 事件來處理 UI 執行緒例外狀況,而 UnhandledException 事件則是用來處理非 UI 執行緒例外狀況。It uses the ThreadException event to handle UI thread exceptions, and the UnhandledException event to handle non-UI thread exceptions. 由於 UnhandledException 無法防止應用程式終止,因此,此範例只會在終止之前,將錯誤記錄在應用程式事件記錄檔中。Since UnhandledException cannot prevent an application from terminating, the example simply logs the error in the application event log before termination.

這個範例假設您已在 Form 類別上定義兩個 Button 控制項,button1button2This example assumes that you have defined two Button controls, button1 and button2, on your Form class.

   // Creates a class to throw the error.
public:
   ref class ErrorHandler: public System::Windows::Forms::Form
   {
      // Inserts the code to create a form with a button.

      // Programs the button to throw an exception when clicked.
   private:
      void button1_Click( Object^ /*sender*/, System::EventArgs^ /*e*/ )
      {
         throw gcnew ArgumentException( "The parameter was invalid" );
      }

   public:
      static void Main()
      {
         // Creates an instance of the methods that will handle the exception.
         CustomExceptionHandler ^ eh = gcnew CustomExceptionHandler;
         
         // Adds the event handler to the event.
         Application::ThreadException += gcnew ThreadExceptionEventHandler( eh, &Form1::CustomExceptionHandler::OnThreadException );
         
         // Runs the application.
         Application::Run( gcnew ErrorHandler );
      }
   };

   // Creates a class to handle the exception event.
internal:
   ref class CustomExceptionHandler
   {
      // Handles the exception event.
   public:
      void OnThreadException( Object^ /*sender*/, ThreadExceptionEventArgs^ t )
      {
         System::Windows::Forms::DialogResult result = ::DialogResult::Cancel;
         try
         {
            result = this->ShowThreadExceptionDialog( t->Exception );
         }
         catch ( Exception^ ) 
         {
            try
            {
               MessageBox::Show( "Fatal Error", "Fatal Error", MessageBoxButtons::AbortRetryIgnore, MessageBoxIcon::Stop );
            }
            finally
            {
               Application::Exit();
            }
         }
         
         // Exits the program when the user clicks Abort.
         if ( result == ::DialogResult::Abort )
         {
            Application::Exit();
         }
      }

      // Creates the error message and displays it.
   private:
      System::Windows::Forms::DialogResult ShowThreadExceptionDialog( Exception^ e )
      {
         String^ errorMsg = "An error occurred please contact the adminstrator with the following information:\n\n";
         errorMsg = String::Concat( errorMsg, e->Message, "\n\nStack Trace:\n", e->StackTrace );
         return MessageBox::Show( errorMsg, "Application Error", MessageBoxButtons::AbortRetryIgnore, MessageBoxIcon::Stop );
      }
   };
Thread newThread = null;

// Starts the application. 
[SecurityPermission(SecurityAction.Demand, Flags = SecurityPermissionFlag.ControlAppDomain)]
public static void Main(string[] args)
{
    // Add the event handler for handling UI thread exceptions to the event.
    Application.ThreadException += new ThreadExceptionEventHandler(ErrorHandlerForm.Form1_UIThreadException);

    // Set the unhandled exception mode to force all Windows Forms errors to go through
    // our handler.
    Application.SetUnhandledExceptionMode(UnhandledExceptionMode.CatchException);

    // Add the event handler for handling non-UI thread exceptions to the event. 
    AppDomain.CurrentDomain.UnhandledException +=
        new UnhandledExceptionEventHandler(CurrentDomain_UnhandledException);

    // Runs the application.
    Application.Run(new ErrorHandlerForm());
}

// Programs the button to throw an exception when clicked.
private void button1_Click(object sender, System.EventArgs e)
{
    throw new ArgumentException("The parameter was invalid");
}

// Start a new thread, separate from Windows Forms, that will throw an exception.
private void button2_Click(object sender, System.EventArgs e)
{
    ThreadStart newThreadStart = new ThreadStart(newThread_Execute);
    newThread = new Thread(newThreadStart);
    newThread.Start();
}

// The thread we start up to demonstrate non-UI exception handling. 
void newThread_Execute()
{
    throw new Exception("The method or operation is not implemented.");
}

// Handle the UI exceptions by showing a dialog box, and asking the user whether
// or not they wish to abort execution.
private static void Form1_UIThreadException(object sender, ThreadExceptionEventArgs t)
{
    DialogResult result = DialogResult.Cancel;
    try
    {
        result = ShowThreadExceptionDialog("Windows Forms Error", t.Exception);
    }
    catch
    {
        try
        {
            MessageBox.Show("Fatal Windows Forms Error",
                "Fatal Windows Forms Error", MessageBoxButtons.AbortRetryIgnore, MessageBoxIcon.Stop);
        }
        finally
        {
            Application.Exit();
        }
    }

    // Exits the program when the user clicks Abort.
    if (result == DialogResult.Abort)
        Application.Exit();
}

// Handle the UI exceptions by showing a dialog box, and asking the user whether
// or not they wish to abort execution.
// NOTE: This exception cannot be kept from terminating the application - it can only 
// log the event, and inform the user about it. 
private static void CurrentDomain_UnhandledException(object sender, UnhandledExceptionEventArgs e)
{
    try
    {
        Exception ex = (Exception)e.ExceptionObject;
        string errorMsg = "An application error occurred. Please contact the adminstrator " +
            "with the following information:\n\n";

        // Since we can't prevent the app from terminating, log this to the event log.
        if (!EventLog.SourceExists("ThreadException"))
        {
            EventLog.CreateEventSource("ThreadException", "Application");
        }

        // Create an EventLog instance and assign its source.
        EventLog myLog = new EventLog();
        myLog.Source = "ThreadException";
        myLog.WriteEntry(errorMsg + ex.Message + "\n\nStack Trace:\n" + ex.StackTrace);
    }
    catch (Exception exc)
    {
        try
        {
            MessageBox.Show("Fatal Non-UI Error",
                "Fatal Non-UI Error. Could not write the error to the event log. Reason: "
                + exc.Message, MessageBoxButtons.OK, MessageBoxIcon.Stop);
        }
        finally
        {
            Application.Exit();
        }
    }
}

// Creates the error message and displays it.
private static DialogResult ShowThreadExceptionDialog(string title, Exception e)
{
    string errorMsg = "An application error occurred. Please contact the adminstrator " +
        "with the following information:\n\n";
    errorMsg = errorMsg + e.Message + "\n\nStack Trace:\n" + e.StackTrace;
    return MessageBox.Show(errorMsg, title, MessageBoxButtons.AbortRetryIgnore,
        MessageBoxIcon.Stop);
}
Private newThread As Thread = Nothing

' Starts the application. 
<SecurityPermission(SecurityAction.Demand, Flags:=SecurityPermissionFlag.ControlAppDomain)> _
Public Shared Sub Main()
    ' Add the event handler for handling UI thread exceptions to the event.
    AddHandler Application.ThreadException, AddressOf ErrorHandlerForm.Form1_UIThreadException

    ' Set the unhandled exception mode to force all Windows Forms errors to go through
    ' our handler.
    Application.SetUnhandledExceptionMode(UnhandledExceptionMode.CatchException)

    ' Add the event handler for handling non-UI thread exceptions to the event. 
    AddHandler AppDomain.CurrentDomain.UnhandledException, AddressOf CurrentDomain_UnhandledException

    ' Runs the application.
    Application.Run(New ErrorHandlerForm())
End Sub


' Programs the button to throw an exception when clicked.
Private Sub button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles button1.Click
    Throw New ArgumentException("The parameter was invalid")
End Sub

' Start a new thread, separate from Windows Forms, that will throw an exception.
Private Sub button2_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles button2.Click
    Dim newThreadStart As New ThreadStart(AddressOf newThread_Execute)
    newThread = New Thread(newThreadStart)
    newThread.Start()
End Sub


' The thread we start up to demonstrate non-UI exception handling. 
Sub newThread_Execute()
    Throw New Exception("The method or operation is not implemented.")
End Sub


' Handle the UI exceptions by showing a dialog box, and asking the user whether
' or not they wish to abort execution.
Private Shared Sub Form1_UIThreadException(ByVal sender As Object, ByVal t As ThreadExceptionEventArgs)
    Dim result As System.Windows.Forms.DialogResult = _
        System.Windows.Forms.DialogResult.Cancel
    Try
        result = ShowThreadExceptionDialog("Windows Forms Error", t.Exception)
    Catch
        Try
            MessageBox.Show("Fatal Windows Forms Error", _
                "Fatal Windows Forms Error", MessageBoxButtons.AbortRetryIgnore, MessageBoxIcon.Stop)
        Finally
            Application.Exit()
        End Try
    End Try

    ' Exits the program when the user clicks Abort.
    If result = DialogResult.Abort Then
        Application.Exit()
    End If
End Sub

' Handle the UI exceptions by showing a dialog box, and asking the user whether
' or not they wish to abort execution.
' NOTE: This exception cannot be kept from terminating the application - it can only 
' log the event, and inform the user about it. 
Private Shared Sub CurrentDomain_UnhandledException(ByVal sender As Object, _
ByVal e As UnhandledExceptionEventArgs)
    Try
        Dim ex As Exception = CType(e.ExceptionObject, Exception)
        Dim errorMsg As String = "An application error occurred. Please contact the adminstrator " & _
            "with the following information:" & ControlChars.Lf & ControlChars.Lf

        ' Since we can't prevent the app from terminating, log this to the event log.
        If (Not EventLog.SourceExists("ThreadException")) Then
            EventLog.CreateEventSource("ThreadException", "Application")
        End If

        ' Create an EventLog instance and assign its source.
        Dim myLog As New EventLog()
        myLog.Source = "ThreadException"
        myLog.WriteEntry((errorMsg + ex.Message & ControlChars.Lf & ControlChars.Lf & _
            "Stack Trace:" & ControlChars.Lf & ex.StackTrace))
    Catch exc As Exception
        Try
            MessageBox.Show("Fatal Non-UI Error", "Fatal Non-UI Error. Could not write the error to the event log. " & _
                "Reason: " & exc.Message, MessageBoxButtons.OK, MessageBoxIcon.Stop)
        Finally
            Application.Exit()
        End Try
    End Try
End Sub


' Creates the error message and displays it.
Private Shared Function ShowThreadExceptionDialog(ByVal title As String, ByVal e As Exception) As DialogResult
    Dim errorMsg As String = "An application error occurred. Please contact the adminstrator " & _
 "with the following information:" & ControlChars.Lf & ControlChars.Lf
    errorMsg = errorMsg & e.Message & ControlChars.Lf & _
 ControlChars.Lf & "Stack Trace:" & ControlChars.Lf & e.StackTrace

    Return MessageBox.Show(errorMsg, title, MessageBoxButtons.AbortRetryIgnore, MessageBoxIcon.Stop)
End Function

備註

此事件可讓您的 Windows Forms 應用程式處理 Windows Forms 執行緒中發生的未處理例外狀況。This event allows your Windows Forms application to handle otherwise unhandled exceptions that occur in Windows Forms threads. 將事件處理常式附加至 ThreadException 事件以處理這些例外狀況,這會讓您的應用程式處於未知的狀態。Attach your event handler to the ThreadException event to deal with these exceptions, which will leave your application in an unknown state. 可能的話,例外狀況應該由結構化例外狀況處理區塊來處理。Where possible, exceptions should be handled by a structured exception handling block.

您可以藉由設定 SetUnhandledExceptionMode,來變更此回呼是否用於未處理的 Windows Forms 執行緒例外狀況。You can change whether this callback is used for unhandled Windows Forms thread exceptions by setting SetUnhandledExceptionMode. 若要攔截 Windows Forms 中未建立和擁有的執行緒中發生的例外狀況,請使用 UnhandledException 事件處理常式。To catch exceptions that occur in threads not created and owned by Windows Forms, use the UnhandledException event handler.

注意

若要保證不會錯過任何啟用此事件,您必須先附加處理常式,然後才能呼叫 Application.RunTo guarantee that no activations of this event are missed, you must attach a handler before you call Application.Run.

注意

只有一個處理常式可以附加到這個事件。Only one handler can be attached to this event. 如果加入多個處理常式,則只會在未處理的例外狀況上呼叫最近新增的處理常式。If multiple handlers are added, only the most recently added handler will be called on an unhandled exception.

警告

因為這是靜態事件,所以當您的應用程式被處置時,您必須卸離事件處理常式,否則會產生記憶體流失。Because this is a static event, you must detach your event handlers when your application is disposed, or memory leaks will result.

適用於