如何：變更游標類型

發行項
10/18/2023

這個範例示範如何變更 Cursor 特定專案和應用程式的滑鼠指標。

此範例包含可延伸應用程式標記語言（XAML）檔案和檔案後置程式碼。

範例

系統會建立使用者介面，其中包含 ComboBox 選取所需 Cursor 、一組 RadioButton 物件，以判斷資料指標變更是否只套用至單一專案或套用至整個應用程式，以及 Border 套用新資料指標的專案。

<StackPanel>
  <Border Width="300">
    <StackPanel Orientation="Horizontal"
                HorizontalAlignment="Center">
      <StackPanel Margin="10">
        <Label HorizontalAlignment="Left">Cursor Type</Label>
        <ComboBox Width="100"
                  SelectionChanged="CursorTypeChanged"
                  HorizontalAlignment="Left"
                  Name="CursorSelector">
          <ComboBoxItem Content="AppStarting" />
          <ComboBoxItem Content="ArrowCD" />
          <ComboBoxItem Content="Arrow" />
          <ComboBoxItem Content="Cross" />
          <ComboBoxItem Content="HandCursor" />
          <ComboBoxItem Content="Help" />
          <ComboBoxItem Content="IBeam" />
          <ComboBoxItem Content="No" />
          <ComboBoxItem Content="None" />
          <ComboBoxItem Content="Pen" />
          <ComboBoxItem Content="ScrollSE" />
          <ComboBoxItem Content="ScrollWE" />
          <ComboBoxItem Content="SizeAll" />
          <ComboBoxItem Content="SizeNESW" />
          <ComboBoxItem Content="SizeNS" />
          <ComboBoxItem Content="SizeNWSE" />
          <ComboBoxItem Content="SizeWE" />
          <ComboBoxItem Content="UpArrow" />
          <ComboBoxItem Content="WaitCursor" />
          <ComboBoxItem Content="Custom" />
        </ComboBox>
      </StackPanel>
      <!-- The user can select different cursor types using this ComboBox -->
      <StackPanel Margin="10">
        <Label HorizontalAlignment="Left">Scope of Cursor</Label>
        <StackPanel>
          <RadioButton Name="rbScopeElement" IsChecked="True"
                       Checked="CursorScopeSelected">Display Area Only</RadioButton>
          <RadioButton Name="rbScopeApplication"
                       Checked="CursorScopeSelected">Entire Appliation</RadioButton>
        </StackPanel>
      </StackPanel>
    </StackPanel>
  </Border>
  <!-- When the mouse pointer is over this Border -->
  <!-- the selected cursor type is shown -->
  <Border Name="DisplayArea" Height="250" Width="400"
          Margin="20" Background="AliceBlue">
    <Label HorizontalAlignment="Center">
      Move Mouse Pointer Over This Area
    </Label>
  </Border>
</StackPanel>

下列程式碼後置會 SelectionChanged 建立事件處理常式，此事件處理常式會在中的資料指標類型變更時 ComboBox 呼叫。 switch 語句會篩選資料指標名稱，並設定 Cursor 上名為 DisplayArea 的屬性 Border 。

如果游標變更設定為「整個應用程式」，則 OverrideCursor 屬性會設定為 Cursor 控制項的 Border 屬性。這會強制資料指標變更整個應用程式。

private void CursorTypeChanged(object sender, SelectionChangedEventArgs e)
{
    ComboBox source = e.Source as ComboBox;

    if (source != null)
    {
        ComboBoxItem selectedCursor = source.SelectedItem as ComboBoxItem;

        // Changing the cursor of the Border control
        // by setting the Cursor property
        switch (selectedCursor.Content.ToString())
        {
            case "AppStarting":
                DisplayArea.Cursor = Cursors.AppStarting;
                break;
            case "ArrowCD":
                DisplayArea.Cursor = Cursors.ArrowCD;
                break;
            case "Arrow":
                DisplayArea.Cursor = Cursors.Arrow;
                break;
            case "Cross":
                DisplayArea.Cursor = Cursors.Cross;
                break;
            case "HandCursor":
                DisplayArea.Cursor = Cursors.Hand;
                break;
            case "Help":
                DisplayArea.Cursor = Cursors.Help;
                break;
            case "IBeam":
                DisplayArea.Cursor = Cursors.IBeam;
                break;
            case "No":
                DisplayArea.Cursor = Cursors.No;
                break;
            case "None":
                DisplayArea.Cursor = Cursors.None;
                break;
            case "Pen":
                DisplayArea.Cursor = Cursors.Pen;
                break;
            case "ScrollSE":
                DisplayArea.Cursor = Cursors.ScrollSE;
                break;
            case "ScrollWE":
                DisplayArea.Cursor = Cursors.ScrollWE;
                break;
            case "SizeAll":
                DisplayArea.Cursor = Cursors.SizeAll;
                break;
            case "SizeNESW":
                DisplayArea.Cursor = Cursors.SizeNESW;
                break;
            case "SizeNS":
                DisplayArea.Cursor = Cursors.SizeNS;
                break;
            case "SizeNWSE":
                DisplayArea.Cursor = Cursors.SizeNWSE;
                break;
            case "SizeWE":
                DisplayArea.Cursor = Cursors.SizeWE;
                break;
            case "UpArrow":
                DisplayArea.Cursor = Cursors.UpArrow;
                break;
            case "WaitCursor":
                DisplayArea.Cursor = Cursors.Wait;
                break;
            case "Custom":
                DisplayArea.Cursor = CustomCursor;
                break;
            default:
                break;
        }

        // If the cursor scope is set to the entire application
        // Use OverrideCursor to force the cursor for all elements
        if (cursorScopeElementOnly == false)
        {
            Mouse.OverrideCursor = DisplayArea.Cursor;
        }
    }
}

' When the Radiobox changes, a new cursor type is set
Private Sub CursorTypeChanged(ByVal sender As Object, ByVal e As SelectionChangedEventArgs)

    Dim item As String = CType(e.Source, ComboBox).SelectedItem.Content.ToString()

    Select Case item
        Case "AppStarting"
            DisplayArea.Cursor = Cursors.AppStarting
        Case "ArrowCD"
            DisplayArea.Cursor = Cursors.ArrowCD
        Case "Arrow"
            DisplayArea.Cursor = Cursors.Arrow
        Case "Cross"
            DisplayArea.Cursor = Cursors.Cross
        Case "HandCursor"
            DisplayArea.Cursor = Cursors.Hand
        Case "Help"
            DisplayArea.Cursor = Cursors.Help
        Case "IBeam"
            DisplayArea.Cursor = Cursors.IBeam
        Case "No"
            DisplayArea.Cursor = Cursors.No
        Case "None"
            DisplayArea.Cursor = Cursors.None
        Case "Pen"
            DisplayArea.Cursor = Cursors.Pen
        Case "ScrollSE"
            DisplayArea.Cursor = Cursors.ScrollSE
        Case "ScrollWE"
            DisplayArea.Cursor = Cursors.ScrollWE
        Case "SizeAll"
            DisplayArea.Cursor = Cursors.SizeAll
        Case "SizeNESW"
            DisplayArea.Cursor = Cursors.SizeNESW
        Case "SizeNS"
            DisplayArea.Cursor = Cursors.SizeNS
        Case "SizeNWSE"
            DisplayArea.Cursor = Cursors.SizeNWSE
        Case "SizeWE"
            DisplayArea.Cursor = Cursors.SizeWE
        Case "UpArrow"
            DisplayArea.Cursor = Cursors.UpArrow
        Case "WaitCursor"
            DisplayArea.Cursor = Cursors.Wait
        Case "Custom"
            DisplayArea.Cursor = CustomCursor
    End Select

    ' if the cursor scope is set to the entire application
    ' use OverrideCursor to force the cursor for all elements
    If (cursorScopeElementOnly = False) Then
        Mouse.OverrideCursor = DisplayArea.Cursor
    End If


End Sub

另請參閱

輸入概觀

如何：變更游標類型

範例

另請參閱

意見反應

其他資源