在 Office 365 驗證連接器Validate connectors in Office 365

如果貴公司有自己的電子郵件伺服器 (也稱為內部部署伺服器),您必須設定連接器以啟用 Office 365 和電子郵件伺服器之間的郵件流程。為了讓郵件流程能夠正常運作,必須驗證並開啟連接器。在設定連接器的過程中便會驗證連接器。如果您想要在其他時候驗證連接器,或如果您想要進一步了解此程序,本文將有所助益。請使用內建的連接器驗證來測試是否已正確設定連接器,並在修正任何郵件流程問題後,再開啟連接器。If your organization has its own email server (also called on-premises server), you must set up connectors to enable mail flow between Office 365 and your email server. For mail flow to work correctly, your connectors must be validated and turned on. Connector validation runs as part of the connector setup process. This article helps if you want to validate your connectors at a different time, or if you want to understand more about the process. Use built-in connector validation to test whether a connector is set up correctly and fix any mail flow issues before you turn the connector on.

注意

如果您想要變更連接器設定,在您儲存變更之前,Office 365 會先對郵件流程使用現有連接器設定。如需詳細資訊,請參閱變更 Office 365 用於郵件流程的連接器時會發生什麼事If you want to change connector settings, Office 365 uses the existing connector settings for mail flow until you save your changes. For more information, see Change a connector that Office 365 is using for mail flow

驗證並開啟連接器Validate and turn on connectors

  1. 登入 Office 365,並選擇 [系統],然後按一下 [ Exchange移至 Exchange 系統管理中心。按一下 [郵件流程,然後按一下 [連接器Sign in to Office 365, choose Admin, and then click Exchange to go to the Exchange admin center. Click mail flow, and click connectors.

    [連接器] 頁面上列出您的組織有任何 Office 365 連接器。這包括使用混合組態精靈] 或 [Windows PowerShell 所建立的連接器。您可以驗證郵件流程來自 Office 365 組織的電子郵件伺服器,或協力廠商組織設定任何連接器。Any Office 365 connectors that exist for your organization are listed on the connectors page. This includes connectors that were created by using the Hybrid Configuration Wizard or Windows PowerShell. You can validate any connector configured for mail flow from Office 365 to your organization's email server, or to a partner organization.

  2. 選擇您要驗證或開啟的連接器。您可以在詳細資料窗格中查看連接器的相關資訊,如以下螢幕擷取畫面所示。Choose the connector you want to validate or turn on. You can see information about the connector in the details pane as shown in the following screen shot.

顯示已關閉且驗證失敗的從 Office 365 到 Exchange Server 的連接器。

  1. 當您在 Office 365 中選取連接器來源的郵件流程時,您可以選擇 [驗證此連接器] 連結。您也可以參閱連接器已驗證先前如下列螢幕擷取畫面所示。When you select a connector for mail flow that originates in Office 365, you can choose the Validate this connector link. You can also see whether the connector was validated previously as shown in the following screen shot.

    顯示先前已驗證的連接器,以及用來重新驗證連接器的連結。

  2. 以選取連接器選擇驗證此連接器驗證此連接器] 對話方塊隨即開啟。輸入要啟動驗證的一或多個電子郵件地址。Office 365 使用這些地址來確定您的郵件流程設定正確。例如,如果您想要驗證您組織的電子郵件伺服器的郵件流程來自 Office 365 的連接器,輸入電子郵件地址信箱位於該電子郵件伺服器上。With the connector selected, choose Validate this connector. The Validate this connector dialog box opens. Enter one or more email addresses to start the validation. Office 365 uses these addresses to make sure your mail flow is set up correctly. For example, if you want to validate a connector for mail flow from Office 365 to your organization's email server, enter an email address for a mailbox located on that email server.

  3. 選擇 [繼續驗證。若要找出哪些問題驗證檢查、 及如需修正任何驗證錯誤的詳細資訊,請參閱修復連接器驗證錯誤Choose Validate to continue. To find out what issues validation examines, and for details about fixing any validation errors, see Fixing connector validation errors.

  4. 針對每一個連接器,查看是否已開啟的連接器。如果未開啟連接器所需的郵件流程,[狀態] 下選擇加以開啟For each connector, check whether the connector is turned on. If a connector that you need for mail flow isn't turned on, under Status choose Turn it on.

注意

如果在驗證過連接器之後仍有郵件流程方面的問題,請檢查是不是因為您針對單一案例設定了多個可以適用的連接器。例如,如果您針對從 Office 365 到電子郵件伺服器的郵件流程設定了多個連接器,就可能會發生問題。如果從 Office 365 到電子郵件伺服器 (或到合作夥伴) 的郵件流程需要多個連接器,請確定您有驗證並開啟每個連接器。 > 如果您想要變更連接器,在您儲存變更之前,Office 365 會先對郵件流程使用現有連接器設定。如需詳細資訊,請參閱變更 Office 365 用於郵件流程的連接器時會發生什麼事If you continue to have mail flow issues after validating a connector, check whether you have set up multiple connectors that might apply in a single scenario. For example, problems can occur if you have more than one connector set up for mail flow from Office 365 to your email server. If you need multiple connectors for mail flow from Office 365 to your email server (or to a partner), make sure you validate and turn on each connector. > If you want to change a connector, Office 365 uses the existing connector settings for mail flow until you save your changes. For more information, see Change a connector that Office 365 is using for mail flow

See alsoSee also

設定連接器以在 Office 365 和您自己的電子郵件伺服器之間路由傳送郵件Set up connectors to route mail between Office 365 and your own email servers

Configure mail flow using connectors in Office 365Configure mail flow using connectors in Office 365

Fixing connector validation errorsFixing connector validation errors

我何時需要連接器?When do I need a connector?