Exchange 2013 的電話語音 advisorTelephony advisor for Exchange 2013

整合通訊 (UM) 需要與現有的電話系統整合 Microsoft Exchange,您的組織。成功部署需要您以讓您現有的電話語音基礎結構的小心分析和執行部署整合通訊的正確規劃步驟。Unified Messaging (UM) requires that you integrate Microsoft Exchange with the existing telephony system for your organization. A successful deployment requires you to make a careful analysis of your existing telephony infrastructure and to perform the correct planning steps to deploy Unified Messaging.

規劃階段可以是 exchange 系統管理員具有少或沒有體驗與電話語音網路大幅挑戰。為了處理這個挑戰,請參閱下一節可協助您 UM 部署的資源The planning phase can be a significant challenge to Exchange administrators who have little or no experience with a telephony network. To help address this challenge, see the following section Resources to help with your UM deployment.

本主題中的其他章節涵蓋支援的 VoIP 閘道的整合通訊、 如何決定是否 PBX 支援使用特定的 VoIP 閘道模型或製造商、 是否將 IP PBX 支援使用直接 SIP 連線,以及支援工作階段邊界控制器 (Sbc) 為 Exchange Online UM。The other sections in this topic cover the supported VoIP gateways for Unified Messaging, how to determine whether your PBX is supported using a specific VoIP gateway model or manufacturer, whether your IP PBX is supported using a direct SIP connection, and supported session border controllers (SBCs) for Exchange Online UM.

資源以協助您的 UM 部署Resources to help with your UM deployment

它具挑戰性建立部署電話語音網路的指導方針。因為他們可以使用不同的組態設定、 韌體和需求包括 VoIP 閘道、 IP Pbx 和 Pbx,他們可以與彼此非常不同。不過,多個資源是可用來協助您順利部署整合通訊:It's challenging to create guidelines for deploying telephony networks. They can be very different from one another because they can include VoIP gateways, IP PBXs, and PBXs with different configuration settings, firmware, and requirements. However, several resources are available to help you successfully deploy Unified Messaging:

連絡整合通訊專家之前,您應該能夠回答他們將要求的重要問題。有下列問題的答案有助於讓您與 UM 專家之間的對話提高工作效率:Before you engage a Unified Messaging specialist, you should be able to answer key questions that they'll ask. Having the answers to the following questions will help make the conversation between you and the UM specialist productive:

  • 多少現有電話、 語音郵件使用者,或兩者位於您組織中吗?How many existing telephone or voice mail users, or both, are in your organization?

  • 您想要提供整合通訊多少使用者?How many users do you intend to provide with Unified Messaging?

  • 您要用於與整合通訊整合的 PBX 或 Pbx?Which PBX or PBXs do you intend to use for integration with Unified Messaging?

  • 您的組織有多少 Pbx?指定廠商、 類型 (電路或 IP-型)、 模型與韌體版本。How many PBXs does your organization have? Specify the vendors, types (circuit- or IP-based), models, and firmware versions.

  • Pbx 網路,以及它們集中式或位於多個位置吗?Are the PBXs networked, and are they centralized or located in multiple locations?

  • 目標語音郵件系統沒有組織目前所使用?指定廠商、 類型、 模型與韌體版本。What voice mail system or systems does your organization currently use? Specify the vendors, types, models, and firmware versions.

  • 如何部署語音信箱系統整合至您的 Pbx (類比、 T1/E1、 PRI、 數位設定模擬、 VoIP 其他)?How are the voice mail systems integrated into your PBXs (Analog, T1/E1, PRI, Digital set emulation, VoIP, other)?

  • 您目前使用語音網路吗?Are you currently using voice networking?

  • 貴組織是否使用何種類型的傳真系統或系統,以及確實傳真系統支援輸入的傳真路由傳送至 Exchange?What type of fax system or systems does your organization use, and does the fax system or systems support inbound fax routing to Exchange?

  • 您的組織是否使用自動語音應答吗?Does your organization use automated attendants?

  • 是否您需要支援僅限電話的使用者,也就是不具有電子郵件使用者?Do you need support for phone-only users, that is, users who won't have email access?

支援的 VoIP 閘道器Supported VoIP gateways

含有 Pbx 整合 Unified Messaging 需要使用一或多個 VoIP 閘道翻譯 TDM 型 pbx 設定為使用整合通訊的 IP 型、 封包切換通訊協定所使用的電路切換型通訊協定。支援的整合通訊與已測試 VoIP 閘道廠商與數個模型的 VoIP 和媒體閘道。Integrating Unified Messaging with PBXs requires you to use one or more VoIP gateways to translate the circuit-switched protocols that are used by TDM-based PBXs to IP-based, packet-switched protocols that are used by Unified Messaging. VoIP gateway vendors with several models of VoIP and media gateways have been tested and are supported for Unified Messaging.

現在已與 Microsoft Unified Communications 開啟互通性計劃與 VoIP 閘道、 IP Pbx 和 Sbc 的整合通訊互通性測試。如需詳細資訊,請參閱Microsoft Unified Communications 開啟互通性計劃Interoperability testing of Unified Messaging with VoIP gateways, IP PBXs, and SBCs is now integrated with the Microsoft Unified Communications Open Interoperability Program. For more information, see Microsoft Unified Communications Open Interoperability Program.

Microsoft Unified Communications 開啟互通性計劃限定程式 VoIP 閘道、 IP Pbx 及進階的 VoIP 閘道可確保客戶有一致的安裝程式與時所使用的支援體驗完整電話語音 VoIP 閘道器、 IP Pbx 與 Microsoft 整合通訊軟體。符合嚴格且廣泛測試需求並符合的規格及測試計劃產品收到完整名稱。The Microsoft Unified Communications Open Interoperability Program qualification program for VoIP gateways, IP PBXs, and advanced VoIP gateways ensures that customers have a seamless setup and support experience when they're using qualified telephony VoIP gateways and IP PBXs with Microsoft Unified Communications software. Only products that meet rigorous and extensive testing requirements and conform to the specifications and test plans receive qualification.

如需設定支援 VoIP 閘道、 IP Pbx、 Pbx 和 Sbc 的詳細資訊,請參閱下列資源:For details about configuring supported VoIP gateways, IP PBXs, PBXs, and SBCs, see one of the following resources:

下列的 VoIP 閘道廠商已驗證的互通性:Interoperability was verified for the following VoIP gateway vendors:

  • AudioCodesAudioCodes

  • DialogicDialogic

  • 下表顯示 VoIP 閘道廠商、 VoIP 閘道模型和每個模型所支援的通訊協定。The following table shows the VoIP gateway vendor, the VoIP gateway model, and the protocols that are supported by each model.

支援的 VoIP 閘道的整合通訊Supported VoIP gateways for Unified Messaging

廠商Vendor 模型Model 支援的通訊協定Supported protocols
AudioCodesAudioCodes
MediaPack 114/8 FXOMediaPack 114/8 FXO
使用頻內 DTMF 類比Analog with In-Band DTMF
使用 SMDI 類比Analog with SMDI
AudioCodesAudioCodes
Mediant 1000Mediant 1000
使用頻內 DTMF 類比Analog with In-Band DTMF
使用 SMDI 類比Analog with SMDI
BRI Q.SIGBRI Q.SIG
T1/E1 Q.SIGT1/E1 Q.SIG
IP-IPIP-to-IP
AudioCodesAudioCodes
Mediant 2000Mediant 2000
T1/E1 CAST1/E1 CAS
T1/E1 Q.SIGT1/E1 Q.SIG
IP-IPIP-to-IP
DialogicDialogic
DMG1000PBXDNIWDMG1000PBXDNIW
數位組模擬Digital Set Emulation
DialogicDialogic
DMG1000LSWDMG1000LSW
使用頻內 DTMF 類比Analog with In-Band DTMF
使用 SMDI 類比Analog with SMDI
DialogicDialogic
DMG2000DMG2000
T1 CAST1 CAS
T1/E1 Q.SIGT1/E1 Q.SIG
DialogicDialogic
DMG3000DMG3000
BRI Q.SIGBRI Q.SIG
NETNET
VX1200VX1200
T1 Q.SIGT1 Q.SIG
SonusSonus
SBC 1000/2000 2.2.1 或更新版本SBC 1000/2000 2.2.1 or later
TDM 訊號 (ISDN): 在&T 4ESS/5ESS、 規則 DMS 100、 歐元 ISDN (以 300 102)、 QSIG、 NTT InsNet (日本)、 ANSI 國民 ISDN-2 (NI-2)TDM Signaling (ISDN): AT&T 4ESS/5ESS, Nortel DMS- 100, Euro ISDN (ETSI 300-102), QSIG, NTT InsNet (Japan), ANSI National ISDN-2 (NI-2)
TDM 訊號 (CAS): T1 CAS (E&M、 迴圈開始);E1 CAS (R2)TDM Signaling (CAS): T1 CAS (E&M, Loop start); E1 CAS (R2)
QuintumQuintum
Tenor DX 系列Tenor DX Series
T1 Q.SIGT1 Q.SIG

支援的 pbx 設定時使用 AudioCodes VoIP 閘道Supported PBXs when using an AudioCodes VoIP gateway

下表顯示支援使用 AudioCodes VoIP 閘道器,包括 MediaPack 114 FXO、 MediaPack 118 FXO 及 Mediant 2000 Pbx。The following table shows the PBXs that are supported using AudioCodes VoIP gateways, including MediaPack-114 FXO, MediaPack-118 FXO, and Mediant 2000.

Pbx 與 AudioCodes VoIP 閘道支援PBXs supported with an AudioCodes VoIP gateway

PBX 製造商PBX manufacturer PBX 模型/類型PBX model/type AudioCodes 模型"x"-4 或 8 個需要"y"以取代-取代為 1、 2、 4、 8 或需要在每個 16AudioCodes model "x" - replace with 4 or 8 per need "y" - replace with 1, 2, 4, 8 or 16 per need
AlcatelAlcatel
OmniPCX 4400OmniPCX 4400
MediaPack 11 x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
Mediant2000/ySpans/SIPMediant2000/ySpans/SIP
AastraAastra
M1000、 M2000M1000, M2000
Mediant2000/ySpans/SIPMediant2000/ySpans/SIP
AvayaAvaya
具體 G3Definity G3
MediaPack 11 x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
Mediant1000/ySpans/SIPMediant1000/ySpans/SIP
Mediant2000/ySpans/SIPMediant2000/ySpans/SIP
AvayaAvaya
Magix/MerlinMagix/Merlin
MediaPack 11 x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
AvayaAvaya
S8300S8300
MediaPack 11 x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
Mediant1000/ySpans/SIPMediant1000/ySpans/SIP
Mediant2000/ySpans/SIPMediant2000/ySpans/SIP
AvayaAvaya
S8700S8700
MediaPack 11 x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
Mediant1000/ySpans/SIPMediant1000/ySpans/SIP
Mediant2000/ySpans/SIPMediant2000/ySpans/SIP
AvayaAvaya
IP OfficeIP Office
MediaPack 11 x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
Mediant2000/ySpans/SIPMediant2000/ySpans/SIP
CiscoCisco
CallManager 4.xCallManager 4.x
Mediant1000/IP 至-IPMediant1000/IP-to-IP
Mediant2000/IP 至-IPMediant2000/IP-to-IP
NECNEC
Electra 精銳Electra Elite
MediaPack 11 x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
NECNEC
NEAX2400NEAX2400
MediaPack 11 x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
Mediant2000/ySpans/SIP/RS232Mediant2000/ySpans/SIP/RS232
NeXspanNeXspan
SS
MediaPack 11 x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
規則Nortel
通訊伺服器-1000 M、 1000S、 1000ECommunication Server-1000M, 1000S, 1000E
Mediant1000/ySpans/SIPMediant1000/ySpans/SIP
Mediant2000/ySpans/SIPMediant2000/ySpans/SIP
規則Nortel
Meridian 11 c 51 c、 61 c、 81 cMeridian 11c, 51c, 61c, 81c
Mediant1000/ySpans/SIPMediant1000/ySpans/SIP
Mediant2000/ySpans/SIPMediant2000/ySpans/SIP
PanasonicPanasonic
KX-KX TEA308 TES824KX-TES824, KX-TEA308
MediaPack 11 x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
PanasonicPanasonic
KX-KX-TDA100 TDA30 KX TDA200、 KX TDA600KX-TDA30, KX-TDA100, KX-TDA200, KX-TDA600
MediaPack 11 x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
ShortelShortel
IP 電話系統IP Telephony System
MediaPack 11 x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
SiemensSiemens
HiCom 150EHiCom 150E
MediaPack 11 x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
SiemensSiemens
HiPath 3550HiPath 3550
MediaPack 11 x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
SiemensSiemens
HiPath 4000HiPath 4000
MediaPack 11 x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
Mediant1000/ySpans/SIPMediant1000/ySpans/SIP
Mediant2000/ySpans/SIPMediant2000/ySpans/SIP
Tadiran 電信Tadiran Telecom
珊瑚紅 Flexicom、 珊瑚紅 IPXCoral Flexicom, Coral IPX
MediaPack 11 x/FXO/AC/SIP-0MediaPack 11x/FXO/AC/SIP-0
Mediant1000/ySpans/SIPMediant1000/ySpans/SIP
Mediant2000/ySpans/SIPMediant2000/ySpans/SIP

支援的 pbx 設定時使用 Dialogic VoIP 閘道Supported PBXs when using a Dialogic VoIP gateway

每個 Dialogic VoIP 閘道模型支援不同的 Pbx。下列資料表顯示 PBX 製造商及模型和可以用哪些 Dialogic VoIP 閘道。每個 VoIP 閘道使用不同的訊號方法、 密度、 和通訊協定。Each Dialogic VoIP gateway model supports different PBXs. The following tables show the PBX manufacturer and model and which Dialogic VoIP gateway can be used. Each VoIP gateway uses different signaling methods, densities, and protocols.

Pbx 時使用 DMG1000 系列媒體閘道支援PBXs supported when using a DMG1000 series Media Gateway

下表顯示支援與低 Dialogic 媒體閘道 (DMG1000) Pbx。不過,類比 DMG1000 使用時,補充訊號 (RS232 SMDI、 MD110、 MCI 通訊協定或 Inband DTMF 訊號),則需要。The following table shows the PBXs that are supported with the low-density Dialogic Media Gateway (DMG1000). However, when an analog DMG1000 is used, supplemental signaling (RS232 SMDI, MD110, MCI protocols, or Inband DTMF signaling) is required.

Pbx 時使用低 Dialogic DMG1000 數列 VoIP 閘道支援PBXs supported when using a low-density Dialogic DMG1000 series VoIP gateway

PBX 製造商PBX manufacturer PBX 模型/類型PBX model/type 殺傷力模型及其他訊號DMG model and additional signaling
AastraAastra
Aastra MD110 (前身為易利信行動 MD110)Aastra MD110 (formerly Ericsson MD110)
DMG1008LSWDMG1008LSW
使用 MD110 RS232 通訊協定的類比連線Analog connectivity using the MD110 RS232 protocol
AlcatelAlcatel
通用 PCX 4400Omni PCX 4400
DMG1008LSWDMG1008LSW
AvayaAvaya
具體 G3 S8100、 S8300、 S8700 及 S8710 (通訊管理員 SW 2.0 版或更新版本)Definity G3 S8100, S8300, S8700, and S8710 (Communications Mgr SW V2.0 or later versions)
DMG1008DNIWDMG1008DNIW
交互通訊Intercom

DMG1008LSWDMG1008LSW
使用 SMDI 序列通訊協定的類比連線Analog connectivity using SMDI serial protocol
MitelMitel
SX-200 D、 SX 200 淺、 SX 2000 淺、 SX 2000 S、 SX 2000 VS SX 200 ICPSX-200D, SX-200 Light, SX-2000 Light, SX-2000 S, SX-2000 VS, SX-200 ICP
DMG1008MTLDNIWDMG1008MTLDNIW
NECNEC
2000、 2400、 2400 IPX2000, 2400, 2400 IPX
DMG1008DNIWDMG1008DNIW
規則Nortel
Meridian 1-選項 11、 21、 21A、 51、 61、 71、 及 81Meridian 1 - Option 11, 21, 21A, 51, 61, 71, and 81
Meridian SL1-一般 X11 版本 15 或更新版本Meridian SL1 - Generic X11, Release 15 or later versions
規則 Communication Server-1000 M、 1000S、 1000E V3.0 或更新版本Nortel Communication Server - 1000M, 1000S, 1000E with V3.0 or later versions
DMG1008DNIWDMG1008DNIW
規則Nortel
SL 100SL 100
DMG1008LSWDMG1008LSW
使用 SMDI 序列通訊協定的類比連線Analog connectivity using SMDI serial protocol
SiemensSiemens
HiCom 300E CSHiCom 300E CS
DMG1008DNIWDMG1008DNIW
SiemensSiemens
HiCom 300E (歐洲)HiCom 300E (European)
DMG1008LSWDMG1008LSW
使用 Inband DTMF 訊號類比連線Analog connectivity using Inband DTMF signaling
Siemens/ROLMSiemens/ROLM
8000 (西南指向版本 80003 或更新版本) 9000 (所有版本)8000 (SW release 80003 or later versions) 9000 (All versions)
9751 (所有版本的 SW 都版本 9005)9751 (All versions of SW release 9005)
9751 (西南指向版本 9006.4 或更新版本)9751 (SW release 9006.4 or later versions)
DMG1008RLMDNIWDMG1008RLMDNIW
SiemensSiemens
HiPath 4000HiPath 4000
DMG1008LSWDMG1008LSW
地區Toshiba
CTX (西南指向版本 AR1ME021.00)CTX (SW version AR1ME021.00)
DMG1008LSWDMG1008LSW
其他人Others
各種Various
DMG1008LSWDMG1008LSW
使用 Inband DTMF 或 SMDI 類比連線Analog connectivity using either Inband DTMF or SMDI

Pbx 時使用殺傷力 2000年系列媒體閘道支援PBXs supported when using a DMG 2000 series Media Gateway

下表顯示支援使用 T1/E1 Dialogic 媒體閘道 (DMG2000) Pbx。在單一範圍 (DMG2030DTIQ) 而言,[DMG2000 閘道,雙跨 (DMG2060DTIQ),或四跨越 (DMG2120DTIQ) 密度、 支援下列通訊協定:The following table shows the PBXs that are supported with the T1/E1 Dialogic Media Gateway (DMG2000). The DMG2000 gateway, which comes in single span (DMG2030DTIQ), dual span (DMG2060DTIQ), or quad span (DMG2120DTIQ) densities, supports the following protocols:

  • T1 CAST1 CAS

  • T1 Q.SIGT1 Q.SIG

  • E1 Q.SIGE1 Q.SIG

  • T1 NI-2T1 NI-2

  • T1 5ESST1 5ESS

  • T1 DMS100T1 DMS100

如果使用訊號通道相關聯訊號 (CAS) 時,補充訊號 (RS232 SMDI、 MD110、 MCI 通訊協定或 Inband DTMF 訊號),則需要。如果使用 Q.SIG 訊號,PBX 必須支援的補充服務相關聯呼叫並呼叫方資訊和通話傳輸整合通訊所需的功能。If Channel Associated Signaling (CAS) signaling is used, supplemental signaling (RS232 SMDI, MD110, MCI protocols, or Inband DTMF signaling) is required. If Q.SIG signaling is used, the PBX must support the supplemental services that are associated with calling and called party information and the call transfer capabilities required by Unified Messaging.

Pbx 與 DMG2000 媒體閘道支援PBXs supported with the DMG2000 Media Gateway

PBX 製造商PBX manufacturer PBX 模型/類型PBX model/type 必要的軟體版本Required software version 通訊協定及其他訊號Protocol and additional signaling
AlcatelAlcatel
通用 PCX 4400Omni PCX 4400
版本 3.2.712.5Version 3.2.712.5
T1 Q.SIGT1 Q.SIG
E1 Q.SIGE1 Q.SIG
AvayaAvaya
具體 G3Definity G3
3 或更新版本Version 3 or later
T1 CAST1 CAS
AvayaAvaya
S8500S8500
管理員 SW 2.0 版或更新版本Manager SW V2.0 or later versions
T1 CAST1 CAS
T1 Q.SIGT1 Q.SIG
E1 Q.SIGE1 Q.SIG
易利信行動Ericsson
MD110MD110
釋出 MX1 TSW R2A (BC13)Release MX1 TSW R2A (BC13)
E1 Q.SIGE1 Q.SIG
交互通訊Intercom


CAS (具有 SMDI 序列通訊協定)CAS (w/ SMDI serial protocol)
NECNEC
2400 /IMX2400 IMX
釋出 5200 年 12 月 92年 1b 或更新版本Release 5200 Dec. 92 1b or later versions
CAS (具有 MCI 序列通訊協定)CAS (w/ MCI serial protocol)
NECNEC
2400 IPX2400 IPX
R17 版本 03.46.001R17 Release 03.46.001
T1 Q.SIGT1 Q.SIG
規則Nortel
Meridian 1-選項 11Meridian 1 - Option 11
版本 15 或更新版本、 和選項 19 46 所需Release 15 or later versions, and options 19 and 46 are required
T1 Q.SIGT1 Q.SIG
E1 Q.SIGE1 Q.SIG
規則Nortel
Communication Server 1000Communication Server 1000
版本 2121、 版本 4Version 2121, Release 4
T1 Q.SIGT1 Q.SIG
E1 Q.SIGE1 Q.SIG
SiemensSiemens
HiCom 300E CSHiCom 300E CS
版本 9006.4 或更新版本 (請注意: 僅 North American 軟體負載)Release 9006.4 or later (Note: North American software load only)
T1 CAST1 CAS
SiemensSiemens
HiPath 4000HiPath 4000
V2 SMR 9 SMPOV2 SMR 9 SMPO
T1 Q.SIGT1 Q.SIG
E1 Q.SIGE1 Q.SIG
MitelMitel
SX 2000 S、 SX 2000 VSSX-2000 S, SX-2000 VS
LW 34LW 34
T1 Q.SIGT1 Q.SIG
E1 Q.SIGE1 Q.SIG
MitelMitel
33003300
版本 5.1.4.8Version 5.1.4.8
T1 Q.SIGT1 Q.SIG
E1 Q.SIGE1 Q.SIG

Pbx 時使用 DMG4008BRI 系列媒體閘道支援PBXs supported when using a DMG4008BRI series Media Gateway

媒體閘道隨附數個 TDM 介面選項 DMG4000 數列。DMG4008BRI 支援 4 連接埠/8 通道密度還可支援下列通訊協定:The DMG4000 series Media Gateway comes with several TDM interface options. The DMG4008BRI supports 4-port/8-channel densities and supports the following protocols:

  • ISDN BRI Q.SIGISDN BRI Q.SIG

  • 以 DSS1 (歐元 ISDN)ETSI-DSS1 (Euro ISDN)

  • NET 3 (比利時)NET 3 (Belgium)

  • VN3 (法國)VN3 (France)

  • 1TR6 (德國)1TR6 (Germany)

  • 集 64 (日本)INS-64 (Japan)

  • 5ESS 自訂 (「 北美地區 」 位在&T)5ESS Custom (North America - AT&T)

  • 國際 ISDN (NI1-「 北美地區 」)National ISDN (NI1 - North America)

下表顯示支援使用 Dialogic 4000 媒體閘道數列 (DMG4008) Pbx。The following table shows the PBXs that are supported using a Dialogic 4000 Media Gateway Series (DMG4008).

支援使用 DMG4008BRI 媒體閘道的 PbxPBXs supported using a DMG4008BRI Media Gateway

PBX 製造商PBX manufacturer PBX 模型/類型PBX model/type 必要的軟體版本Required software version 通訊協定及其他訊號Protocol and additional signaling
SiemensSiemens
HiCom 300HiCom 300
SA300 V3.05SA300-V3.05
BRI-Q。簽章 (ECMAV2)BRI-Q.SIG (ECMAV2)
SiemensSiemens
HiPath 4000HiPath 4000
S.0 B4400S.0 B4400
BRI-Q。簽章 (ECMAV2)BRI-Q.SIG (ECMAV2)

支援的 IP PbxSupported IP PBXs

由整合通訊也支援 IP Pbx。下表顯示支援使用直接 SIP 連線至 [整合通訊 IP Pbx。IP PBXs are also supported by Unified Messaging. The following table shows the IP PBXs that are supported using a direct SIP connection to Unified Messaging.

支援使用直接 SIP 連線時的 IP PbxIP PBXs supported when using a direct SIP connection

PBX 製造商PBX manufacturer PBX 模型/類型PBX model/type 必要的軟體版本Required software version
AastraAastra
MX 一MX-ONE
4.04.0
AvayaAvaya
靈氣Aura
5.2.1 含 Service Pack 5 (SP5)5.2.1 with Service Pack 5 (SP5)
AvayaAvaya
Communication Server 2100Communication Server 2100
CS2100 SE13CS2100 SE13
CiscoCisco
呼叫管理員] 中,整合的通訊管理員Call Manager, Unified Communications Manager
5.1、 6.x、 7.0 and8.05.1, 6.x, 7.0 and8.0

支援時使用 SIP 媒體閘道的 IP PbxIP PBXs supported when using SIP media gateways

使用 SIP 媒體閘道也支援由整合通訊 IP Pbx。下表顯示支援使用 IP 功能 SIP 媒體閘道的 IP 連線至整合通訊 IP Pbx。IP PBXs using SIP media gateways are also supported by Unified Messaging. The following table shows the IP PBXs that are supported using IP to IP capabilities of SIP media gateways to connect to Unified Messaging.

支援時使用的 SIP 媒體閘道的 IP PbxIP PBXs supported when using a SIP media gateway

PBX 製造商PBX manufacturer PBX 模型/類型PBX model/type SIP 閘道模型SIP gateway model
CiscoCisco
呼叫管理員 4.xCall Manager 4.x
AudioCodes Mediant 1000/2000 (IP-至-啟用 IP)AudioCodes Mediant 1000/2000 (IP-to-IP enabled)

Exchange 整合通訊、 Office Communications Server 2007 R2 和 Microsoft Lync ServerExchange Unified Messaging, Office Communications Server 2007 R2, and Microsoft Lync Server

內部部署和混合式 Exchange 整合通訊的部署可以搭配 Microsoft Office Communications Server 2007 R2,Microsoft Lync Server 2010 部署或 Lync Server 2013 提供語音訊息、 立即訊息 (IM)、 增強的使用者目前狀態、 音訊視訊會議和整合式電子郵件及訊息為在組織中的使用者經驗。如需詳細資訊,請參閱:For on-premises and hybrid deployments, Exchange Unified Messaging can be deployed together with Microsoft Office Communications Server 2007 R2, Microsoft Lync Server 2010 or Lync Server 2013 to provide voice messaging, Instant Messaging (IM), enhanced user presence, audio-video conferencing, and an integrated email and messaging experience for users in your organization. For more information, see:

若要了解更多有關 Microsoft Unified Communications 開啟互通性計劃企業電話語音基礎結構,包括尋找完整 SIP PSTN 閘道與 IP Pbx 及程序的電話語音基礎結構廠商加入與參與計畫,請參閱Microsoft Unified Communications 開啟互通性計劃To find out more about the Microsoft Unified Communications Open Interoperability Program for enterprise telephony infrastructure, including finding qualified SIP PSTN gateways and IP PBXs and the process for telephony infrastructure vendors to join and participate in the program, see Microsoft Unified Communications Open Interoperability Program.