Lync Server 2013 中的 AudioStream 表格AudioStream table in Lync Server 2013

 

主題上次修改日期: 2012-10-02Topic Last Modified: 2012-10-02

每筆記錄代表一個音訊資料流程。Each record represents one audio stream. 一個音訊媒體行通常包含兩個音訊資料流程。One audio media line usually contains two audio streams.

Column 資料類型Data Type 索引鍵/索引Key/Index 詳細資料Details

ConferenceDateTimeConferenceDateTime

datetimedatetime

主要Primary

Lync Server 2013 的 MediaLine 表格中參照。Referenced from the MediaLine table in Lync Server 2013.

SessionSeqSessionSeq

intint

主要Primary

Lync Server 2013 的 MediaLine 表格中參照。Referenced from the MediaLine table in Lync Server 2013.

MediaLineLabelMediaLineLabel

Tinyinttinyint

主要Primary

Lync Server 2013 的 MediaLine 表格中參照。Referenced from the MediaLine table in Lync Server 2013.

StreamIDStreamID

intint

主要Primary

媒體行中的唯一識別碼。Unique ID within a media line.

JitterInterArrivalJitterInterArrival

intint

 

從即時控制通訊協定 (RTCP) 統計資料的平均網路抖動。Average network jitter from Real Time Control Protocol (RTCP) statistics.

JitterInterArrivalMaxJitterInterArrivalMax

intint

 

通話期間的最大網路抖動。Maximum network jitter during the call.

PacketLossRatePacketLossRate

十進位 (5,4) decimal(5,4)

 

通話期間的平均封包遺失率。Average packet loss rate during the call.

PacketLossRateMaxPacketLossRateMax

十進位 (5,4) decimal(5,4)

 

通話期間觀察到的封包遺失上限。Maximum packet loss observed during the call.

BurstDensityBurstDensity

十進位 (9,4) decimal(9,4)

 

通話期間的猝量遺失期間的封包遺失平均密度。Average density of packet Loss during bursts of losses during the call.

BurstDurationBurstDuration

intint

 

通話期間的猝量遺失期間的封包遺失平均持續時間。Average duration of packet loss during bursts of losses during the call.

BurstGapDensityBurstGapDensity

十進位 (9,4) decimal(9,4)

 

封包遺失失敗之間的平均封包遺失密度。Average density of packet loss during gaps between bursts of packet loss.

BurstGapDurationBurstGapDuration

intint

 

封包遺失的平均持續時間。Average duration of gaps between bursts of packet loss.

PacketUtilizationPacketUtilization

臨界值Int

 

音訊資料流程的封包計數。Packet count for the audio stream.

BandwidthEstBandwidthEst

臨界值Int

 

音訊資料流程的頻寬估計值。Bandwidth estimates for the audio stream.

DegradationAvgDegradationAvg

十進位 (3,2) decimal(3,2)

 

整個通話的網路 MOS 降低。Network MOS Degradation for the whole call. 範圍是0.0 到5.0。Range is 0.0 to 5.0. 此度量顯示由於抖動和封包遺失,網路 MOS 減少的數量。This metric shows the amount the Network MOS was reduced because of jitter and packet loss. 可接受的品質應小於0.5。For acceptable quality it should less than 0.5.

DegradationMaxDegradationMax

十進位 (3,2) decimal(3,2)

 

通話期間的最大網路 MOS 降級。Maximum Network MOS degradation during the call.

DegradationJitterAvgDegradationJitterAvg

十進位 (3,2) decimal(3,2)

 

抖動導致的網路 MOS 降低。Network MOS degradation caused by jitter.

DegradationPacketLossAvgDegradationPacketLossAvg

十進位 (3,2) decimal(3,2)

 

封包遺失導致的網路 MOS 降低。Network MOS degradation caused by packet loss.

AudioPayloadDescriptionAudioPayloadDescription

intint

ForeignForeign

用於通話的音訊編解碼器,參考來源為 PayloadDescription Table。The audio Codec used for the call, referenced from PayloadDescription Table.

AudioSampleRateAudioSampleRate

intint

 

音訊資料流程的取樣速率。Sampling rate for the audio stream.

往返RoundTrip

intint

 

從 RTCP 統計資料來回的時間。Round trip time from RTCP statistics. 若為可接受的品質,則應小於100ms。For acceptable quality this should be less than 100ms.

RoundTripMaxRoundTripMax

intint

 

音訊資料流程的最大來回時間。Maximum round trip time for the audio stream.

OverallAvgNetworkMOSOverallAvgNetworkMOS

十進位 (3,2) decimal(3,2)

 

通話的平均寬頻網路 MOS。Average wideband Network MOS for the call. 此度量取決於所用的封包遺失、抖動和編解碼器。This metric depends on the packet loss, jitter, and codec used. 範圍為 [1.0 至 5.0]。Range is [1.0 to 5.0].

OverallMinNetworkMOSOverallMinNetworkMOS

十進位 (3,2) decimal(3,2)

 

通話的最小寬頻網路 MOS。The minimum wideband Network MOS for the call.

SendListenMOSSendListenMOS

十進位 (3,2) decimal(3,2)

 

已傳送之音訊的平均預測寬頻傾聽 MOS 分數,包括語音層級、雜訊層級和捕獲裝置特性。The average predicted wideband Listening MOS score for audio sent, including speech level, noise level and capture device characteristics.

SendListenMOSMinSendListenMOSMin

十進位 (3,2) decimal(3,2)

 

通話的最小 SendListenMOS。The minimum SendListenMOS for the call.

RecvListenMOSRecvListenMOS

十進位 (3,2) decimal(3,2)

 

從網路接收之音訊的平均預測寬頻傾聽 MOS 分數,包括語音層級、雜訊層級、編解碼器、網路狀況和捕獲裝置特性。The average predicted wideband Listening MOS score for audio received from the network including speech level, noise level, codec, network conditions and capture device characteristics.

RecvListenMOSMinRecvListenMOSMin

十進位 (3,2) decimal(3,2)

 

通話的最小 RecvListenMOS。The minimum RecvListenMOS for the call.

AudioFECUsedAudioFECUsed

bit

指示是否要將音訊 FEC 用於通話的旗標。Flag indicating if audio FEC was used for the call.

RatioConcealedSamplesAvgRatioConcealedSamplesAvg

十進位 (5,2) decimal(5,2)

音訊修復所產生之隱藏樣本與一般範例的平均比率。Average ratio of concealed samples generated by audio healing to typical samples.

RatioStretchedSamplesAvgRatioStretchedSamplesAvg

十進位 (5,2) decimal(5,2)

音訊修復所產生之延伸樣本的平均比率為典型範例。Average ratio of stretched samples generated by audio healing to typical samples.

RatioCompressedSamplesAvgRatioCompressedSamplesAvg

十進位 (5,2) decimal(5,2)

音訊修復所產生之壓縮樣本與一般範例的平均比率。Average ratio of compressed samples generated by audio healing to typical samples.

入境Inbound

bit

 

接收接收方的資料流程資料。Stream data on receiver side is received.

出境Outbound

bit

 

接收寄件者端的資料流程資料。Stream data on sender side is received.

SenderIsCallerPAISenderIsCallerPAI

bit

 

1表示資料流程是從來電者流向被呼叫方。1 means the stream direction is from the caller to the callee.

0表示資料流程方向從被叫方傳送給來電者。0 means the stream direction is from the callee to the caller.

JitterInterArrivalSDJitterInterArrivalSD

floatfloat

抖動到達時間的標準差。Standard deviation for jitter arrival times.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.

ConcealRatioMaxConcealRatioMax

floatfloat

修復所隱藏的封包的最大比率。Maximum ratio of packets concealed by the healer.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.

ConcealRatioSDConcealRatioSD

floatfloat

修復所隱藏之封包的標準差。Standard deviation for the ratio of packets concealed by the healer.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.

HealerPacketDropRatioHealerPacketDropRatio

floatfloat

修復丟棄的封包比率與接收的封包總數。Ratio of packets dropped by the healer compared to the total number of packets received.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.

HealerFECPacketUsedRatioHealerFECPacketUsedRatio

floatfloat

與接收的封包總數相比,使用轉寄錯誤修正資料包的比例。Ratio of used forward error correction packets compared to the total number of packets received.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.

MaxCompressedSamplesMaxCompressedSamples

floatfloat

修復壓縮的音訊封包數目上限。Maximum number of audio packets that were compressed by the healer.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.

LossCongestionPercentLossCongestionPercent

floatfloat

會指出通話處於遺失擁塞狀態的時間百分比。Indicates the percentage of the time when the call was in a loss congestion state.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.

DelayCongestionPercentDelayCongestionPercent

floatfloat

會指出在此通話所占的百分比,造成擁塞是由網路封包的延遲抵達所造成。Indicates the percentage of the call during which congestion was caused by the delayed arrival of network packets.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.

ContentionDetectedPercentContentionDetectedPercent

floatfloat

會指出通話在競爭網路資源時的時間百分比。Indicates the percentage of the time when the call was competing for network resources.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.

BandwidthEstMinBandwidthEstMin

intint

通話期間測量的頻寬預估最小值。Minimum amount of bandwidth estimation measured during the call.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.

BandwidthEstMaxBandwidthEstMax

intint

通話期間測量的頻寬預估最大值。Maximum amount of bandwidth estimation measured during the call.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.

BandwidthEstStdDevBandwidthEstStdDev

intint

通話期間測量的頻寬預估標準差。Standard deviation of the bandwidth estimation measured during the call.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.

BandwidthEstAvgeBandwidthEstAvge

intint

通話期間測量的平均頻寬預估量。Average amount of bandwidth estimation measured during the call.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.

RelativeOneWayTotalRelativeOneWayTotal

floatfloat

單向延遲的總金額。Total amount of one-way latency. 相對單向延遲會測量用戶端與伺服器之間的延遲。Relative one-way latency measures the delay between the client and the server.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.

RelativeOneWayAverageRelativeOneWayAverage

floatfloat

單向延遲的平均金額。Average amount of one-way latency. 相對單向延遲會測量用戶端與伺服器之間的延遲。Relative one-way latency measures the delay between the client and the server.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.

RelativeOneWayMaxRelativeOneWayMax

floatfloat

單向延遲的最大值。Maximum amount of one-way latency. 相對單向延遲會測量用戶端與伺服器之間的延遲。Relative one-way latency measures the delay between the client and the server.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.

RelativeOneWayBurstOccurrencesRelativeOneWayBurstOccurrences

intint

總單向突發的發生次數。Total one-way burst occurrences. "爆發" 傳輸是一種傳輸,其資料流程中的資料流程與穩定的資料流程相反。A “bursty” transmission is a transmission where data flows in unpredictable bursts as opposed to a steady stream. 此度量單位會測量用戶端與伺服器之間的資料流程。This metric measures data flow between the client and the server.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.

RelativeOneWayBurstDensityRelativeOneWayBurstDensity

floatfloat

總單向爆炸流量密度。Total one-way burst density. "爆發" 傳輸是一種傳輸,其資料流程中的資料流程與穩定的資料流程相反。A “bursty” transmission is a transmission where data flows in unpredictable bursts as opposed to a steady stream. 此度量單位會測量用戶端與伺服器之間的資料流程。This metric measures data flow between the client and the server.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.

RelativeOneWayBurstDurationRelativeOneWayBurstDuration

floatfloat

總單向突發持續時間。Total one-way burst duration. "爆發" 傳輸是一種傳輸,其資料流程中的資料流程與穩定的資料流程相反。A “bursty” transmission is a transmission where data flows in unpredictable bursts as opposed to a steady stream. 此度量單位會測量用戶端與伺服器之間的資料流程。This metric measures data flow between the client and the server.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.

RelativeOneWayGapOccurrencesRelativeOneWayGapOccurrences

intint

對單向間隔的總發生次數。Total one-way gap occurrences. "爆發" 傳輸是一種傳輸,其中資料流程的資料流程與穩定的資料流程相反,其資料流程會以無法預測的方式傳輸;間隙表示這些猝發間的延遲。A “bursty” transmission is a transmission where data flows in unpredictable bursts as opposed to a steady stream; gaps indicate delays between these bursts. 此度量單位會測量用戶端與伺服器之間的資料流程。This metric measures data flow between the client and the server.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.

RelativeOneWayGapDensityRelativeOneWayGapDensity

floatfloat

總單向間距密度。Total one-way gap density. "爆發" 傳輸是一種傳輸,其中資料流程的資料流程與穩定的資料流程相反,其資料流程會以無法預測的方式傳輸;間隙表示這些猝發間的延遲。A “bursty” transmission is a transmission where data flows in unpredictable bursts as opposed to a steady stream; gaps indicate delays between these bursts. 此度量單位會測量用戶端與伺服器之間的資料流程。This metric measures data flow between the client and the server.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.

RelativeOneWayGapDurationRelativeOneWayGapDuration

floatfloat

總的單向間距持續時間。Total one-way gap duration. "爆發" 傳輸是一種傳輸,其中資料流程的資料流程與穩定的資料流程相反,其資料流程會以無法預測的方式傳輸;間隙表示這些猝發間的延遲。A “bursty” transmission is a transmission where data flows in unpredictable bursts as opposed to a steady stream; gaps indicate delays between these bursts. 此度量單位會測量用戶端與伺服器之間的資料流程。This metric measures data flow between the client and the server.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.

DecodeStereoPercentDecodeStereoPercent

floatfloat

解碼為身歷聲的通話百分比。Percentage of the call decoded as stereo.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.

AecRenderStereoPercentAecRenderStereoPercent

floatfloat

透過聲音回聲效果取消器呈現為身歷聲的通話百分比。Percentage of the call rendered as stereo by the acoustic echo canceller.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.

AudioPostFECPLRAudioPostFECPLR

floatfloat

套用轉寄錯誤修正後的封包遺失率。Packet loss rate after forward error correction has been applied.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.

EncodeStereoPercentEncodeStereoPercent

floatfloat

編碼為身歷聲的通話百分比。Percentage of the call encoded as stereo.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.

AecCaptureStereoPercentAecCaptureStereoPercent

floatfloat

以身歷聲的回聲效果取消器取得之來電所占的百分比。Percentage of the call captured as stereo by the acoustic echo canceller.

此欄是在 Microsoft Lync Server 2013 中引進。This column was introduced in Microsoft Lync Server 2013.