在 Lync Server 2013 中編輯設計Editing the design in Lync Server 2013

 

主題上次修改日期: 2013-02-21Topic Last Modified: 2013-02-21

在完成最初的面試問題之後,您可以編輯該網站的 (FQDN) 和 IP 位址的完整功能變數名稱。After completing the initial interview questions, you can edit the fully qualified domain name (FQDN) and IP addresses for the site. 若要這麼做,請在 [全域拓撲] 頁面上,連按兩下您要編輯的網站。To do this, on the Global Topology page, double-click the site that you want to edit.

規劃工具會顯示所選網站的網站拓撲。The Planning Tool displays the site topology for the selected site. 在網站頁面的底部有四個索引標籤:At the bottom of the site page are four tabs:

規劃工具網站拓撲Planning Tool Site Topology

  • 站台拓撲 – 目前顯示頁面具有如同建議的可見拓撲概觀。Site Topology – The currently displayed page with a visual overview of the topology as recommended.

  • Edge Network 圖表– Edge Network 框圖頁面是設計人員在規劃工具中大部分工作的位置。Edge Network Diagram – The Edge Network Diagram page is where the designer does most of the work in the Planning Tool. 此圖表會顯示建議的 Lync Server 2013 拓撲的網路設定,以及伺服器、集區的可編輯專案,以及硬體和網域名稱系統 (DNS) 負載平衡器的名稱。The diagram displays the network configuration for a recommended Lync Server 2013 topology, with editable entries for IP addresses and FQDNs for servers, pool, and both hardware and Domain Name System (DNS) load balancers.

  • Edge Admin 報表 – [Edge Admin 報表] 總共包含四份報表:Edge Admin Report – The Edge Admin Report contains a total of four reports:

    Edge 管理報告頁面Edge Admin Report page

    • 摘要報表 – Edge 網路組態設定的一般報表。Summary Report – A general report of settings for the Edge network configuration. 如果您將 [ Edge Network 圖表 ] 頁面上的值編輯為 [拓撲 TCP/IP,並將用於實際部署中的 FQDN 值,則會在此顯示這些位址和名稱。If you edit the values on the Edge Network Diagram page to the topology TCP/IP and FQDN values of that will be used in the actual deployment, those addresses and names will be represented here. 否則,會顯示預設文字。Otherwise, the default text will appear.

    • 憑證報表 – 憑證報表會列出拓撲所需憑證的主體名稱和主體替代名稱。Certificate Report – The certificate report will list the subject name and subject alternative names for the certificates that are required for the topology.

    • 防火牆報表 – 防火牆報表會列出在基礎結構中設定周邊防火牆所需的資訊。Firewall Report – The firewall report lists information necessary to configure perimeter firewalls in the infrastructure. 這包括 IP 位址 (預設或編輯的值) 、伺服器角色、來源 IP 及埠、目的地 IP 及埠、傳輸通訊協定、應用程式通訊協定,以及相關的附注。This includes the IP addresses (either the default or edited values), server role, source IP and port, destination IP and port, transport protocol, application protocol, and relevant notes.

    • DNS 報告– DNS 報告會列出您必須建立之 DNS 專案的相關資訊。DNS Report – The DNS Report lists relevant information for the DNS entries that you must create. 包含正常運作所需的記錄類型、FQDN、IP 位址和註解。The record type, FQDN, IP address, and comments necessary for the proper operation are included.

  • 網站摘要–網站摘要會顯示您透過回答最初的面試問題或填入 設計網站中的值所做的選擇。Site Summary – The site summary presents an overview of the selections that you made by either answering the initial interview questions or filling in the values in Design Sites. 也會呈現容量資訊。Capacity information is also presented.

    注意

    [網站摘要] 頁面上的資訊是針對各項設計所自訂的,無法包含此處詳述的所有區段或資訊。The information on the Site Summary page is customized for each design and may not contain all sections or information detailed here.