修改 Lync Server 2013 中的經驗品質設定Modify Quality of Experience settings in Lync Server 2013

 

主題上次修改日期: 2013-02-23Topic Last Modified: 2013-02-23

根據預設,在60天后會清除 (QoE) 資料的經驗品質。By default, Quality of Experience (QoE) data is purged after 60 days. 您可以使用 [ 經驗品質資料 ] 頁面上的設定,將資料保留較長或更短的時間週期。You can use the settings on the Quality of Experience Data page to retain the data for a longer or shorter period of time. 如果您停用 QoE,啟用 QoE 之前所捕獲的資料也會加以清除。If you disable QoE, data that was captured before QoE was enabled will also be subject to purging.

注意

您應設定詳細通話記錄 (CDR) 和 QoE 保留相同天數的資料。You should configure call detail recording (CDR) and QoE to retain data for the same number of days. [通話詳細資料包告] 中的每個通話 (Cdr) ,可從監控報告首頁取得,包含 CDR 和 QoE 資訊。Each call in the call detail reports (CDRs), available from the Monitoring Reports homepage, includes CDR and QoE information. 如果 CDR 和 QoE 的清除持續時間不同,有些呼叫可能只會包含 CDR 資料,另有可能只包含 QoE 資料。If the purging duration for CDR and QoE is different, some calls may only include CDR data, while other may only include QoE data.

下列程式說明如何設定 QoE 資料的清除設定。The following procedure describes how to configure purge settings for QoE data.

使用 Lync Server 控制台指定 QoE 資料的保留To specify retention of QoE data by using Lync Server Control Panel

  1. 以 RTCUniversalServerAdmins 群組成員的身分,或是 CsVoiceAdministrator、CsServerAdministrator 或 CsAdministrator 角色的成員身分登入電腦。Log on to the computer as a member of the RTCUniversalServerAdmins group, or as a member of the CsVoiceAdministrator, CsServerAdministrator, or CsAdministrator role. 如需詳細資訊,請參閱 在 Lync Server 2013 中委派設定許可權For details, see Delegate setup permissions in Lync Server 2013.

  2. 開啟瀏覽器視窗,然後輸入管理 URL 以開啟 Lync Server 控制台。Open a browser window, and then enter the Admin URL to open the Lync Server Control Panel. 如需您可以用來啟動 Lync Server 控制台之不同方法的詳細資訊,請參閱 Open Lync server 2013 系統管理工具For details about the different methods you can use to start Lync Server Control Panel, see Open Lync Server 2013 administrative tools.

  3. 在左導覽列中,按一下 [監控和封存],然後按一下 [經驗品質資料]In the left navigation bar, click Monitoring and Archiving, and then click Quality of Experience Data.

  4. 在 [ 經驗品質資料 ] 頁面上,按一下表格中的適當網站,然後按一下 [ 編輯],再按一下 [ 顯示詳細資料]。On the Quality of Experience Data page, click the appropriate site from the table, click Edit, and then click Show Details.

  5. 若要開啟清除,請選取 [ 啟用 QoE 的清除]。To turn on purging, select Enable Purging of QoE.

  6. 在 [ **保持 QoE 的最大持續時間 (天數]) ** 選取應該保留 QoE 資料的最大天數。In Keep QoE for maximum duration (days) select the maximum number of days that QoE data should be retained.

  7. 按一下 [認可]Click Commit.

使用 Windows PowerShell Cmdlet 指定 QoE 保留Specifying QoE Retention by Using Windows PowerShell Cmdlets

您可以使用 Windows PowerShell 及 Set CsQoEConfiguration Cmdlet 來建立 QoE 保留設定。You can create QoE retention settings by using Windows PowerShell and the Set-CsQoEConfiguration cmdlet. 您可以從 Lync Server 2013 管理命令介面或從 Windows PowerShell 的遠端會話中執行此 Cmdlet。You can run this cmdlet either from the Lync Server 2013 Management Shell or from a remote session of Windows PowerShell. 如需使用遠端 Windows PowerShell 連接至 Lync Server 的詳細資訊,請參閱 Lync Server Windows PowerShell 博客文章「快速入門:使用遠端 PowerShell 管理 Microsoft Lync Server 2010」 at https://go.microsoft.com/fwlink/p/?linkId=255876For details about using remote Windows PowerShell to connect to Lync Server, see the Lync Server Windows PowerShell blog article "Quick Start: Managing Microsoft Lync Server 2010 Using Remote PowerShell" at https://go.microsoft.com/fwlink/p/?linkId=255876.

指定特定位置的 QoE 保留To specify QoE retention for a specific location

  • 這個命令可讓 Redmond 網站的 QoE 資料得以清除,並設定網站以維護20天的 QoE 資料。This command enables purging of QoE data for the Redmond site, and configures the site to maintain QoE data for 20 days.

    Set-CsQoeConfiguration -Identity "site:Redmond" -EnablePurging -KeepQoEDataForDays 20
    

若要指定多個位置的 QoE 保留To specify QoE retention for multiple locations

  • 這個命令會針對組織中使用的所有 QoE 設定設定,設定 QoE 保留。This command configures QoE retention for all the QoE configuration settings in use in an organization.

    Get-CsQoEConfiguration | Set-CsQoEConfiguration-EnablePurging -KeepQoEDataForDays 20 
    

如需詳細資訊,請參閱 Set CsQoEConfiguration Cmdlet 的 [說明] 主題。For more information, see the help topic for the Set-CsQoEConfiguration cmdlet.