在 Lync Server 2013 中 Peer-to-Peer IM 報告Peer-to-Peer IM Report in Lync Server 2013

 

主題上次修改日期: 2012-11-01Topic Last Modified: 2012-11-01

對等 IM 報告會提供對等立即訊息 (IM) 工作階段的趨勢資訊 (依集區和驗證類型細分)。此報告可以顯示指定時段內 (例如,每天或每小時) 主控的工作階段總數,或者可以顯示該時段內傳送的立即訊息總數。The Peer-to-Peer IM Report provides trend information about peer-to-peer instant messaging (IM) sessions, broken down by pool and by authentication type. The report can show either the total number of sessions held during the specified time period (for example, day-by-day or hour-by-hour), or it can show the total number of instant messages sent during that time period.

存取對等 IM 報告Accessing the Peer-to-Peer IM Report

您可以只 在 Lync Server 2013 中開啟 Peer-to-Peer 活動摘要報告 ,然後按一下下列其中一個計量,即可存取 Peer-to-Peer IM 報告:You can access the Peer-to-Peer IM Report only by opening the Peer-to-Peer Activity Summary Report in Lync Server 2013 and then clicking either of the following metrics:

  • 對等 IM 工作階段總數Total peer-to-peer IM sessions

  • 對等 IM 訊息總數Total peer-to-peer IM messages

善加利用對等 IM 報告Making the Best Use of the Peer-to-Peer IM Report

依預設,對等 IM 報告會顯示每小時 (或每天,視您的設定而定) 的訊息計數。不過,您也可以選擇依每小時的工作階段來檢視那一天。若要執行這項作業,請按一下報告視窗右上角的 [隱藏/顯示參數]****,然後從 [報告者]**** 清單按一下 [工作階段計數]****。By default, the Peer-to-Peer IM Report shows you the message count per-hour (or day, depending on your settings). However, you can also choose to view the day by sessions per hour. To do that, click Hide/Show Parameters in the upper-right corner of the Reports window, and then click Session Count from the Report by list.

篩選Filters

篩選器可以讓您傳回更精確的資料集,或者以不同方法檢視傳回的資料。下表列出您可以搭配對等 IM 報告的篩選器。Filters provide a way for you to return a more finely targeted set of data or to view the returned data in different ways. The following table lists the filters that you can use with the Peer-to-Peer IM Report.

對等 IM 報告篩選器Peer-to-Peer IM Report Filters

名稱Name 描述Description

FromFrom

時間範圍的開始日期和時間。若要按照小時檢視資料,請輸入開始日期和時間,如下所示:Start date and time for the time range. To view data by hours, enter both the start date and time as follows:

7/7/2012 1:00 PM7/7/2012 1:00 PM

如果您未輸入開始時間,報告會自動從指定日期凌晨 12 點開始。若要按照日期檢視資料,只要輸入日期即可:If you do not enter a start time, the report automatically begins at 12:00 AM on the specified day. To view data by day, enter just the date:

7/7/20127/7/2012

若要按星期或月份查看,請輸入當週或該月內的日期 (您不必輸入當週或該月的第一天):To view by week or by month, enter a date that falls anywhere within the week or month (you do not have to enter the first day of the week or month):

7/3/20127/3/2012

星期永遠是從星期日開始星期六結束。Weeks always run from Sunday through Saturday.

ToTo

時間範圍的結束日期和時間。若要按照小時檢視資料,請輸入結束日期和時間,如下所示:End date and time for the time range. To view data by hours, enter both the end date and time as follows:

7/7/2012 1:00 PM7/7/2012 1:00 PM

如果您未輸入結束時間,報告會自動在指定日期凌晨 12 點結束。若要按照日期檢視資料,只要輸入日期即可:If you do not enter an end time, the report automatically ends at 12:00 AM on the specified day. To view data by day, enter just the date:

7/7/20127/7/2012

若要按星期或月份檢視,請輸入當週或該月您想檢視的日期 (您不必輸入當週或該月的第一天):To view by week or by month, enter a date that falls anywhere within the week or month that you want to view (you do not have to enter the first day of the week or month):

7/3/20127/3/2012

星期永遠是從星期日開始星期六結束。Weeks always run from Sunday through Saturday.

IntervalInterval

時間間隔。請選取下列其中一項:Time interval. Select one of the following:

  • 每小時 (最多可以顯示 25 個小時)Hourly (a maximum of 25 hours can be displayed)

  • 每日 (最多可以顯示 31 天)Daily (a maximum of 31 days can be displayed)

  • 每週 (最多可以顯示 12 週)Weekly (a maximum of 12 weeks can be displayed)

  • 每月 (最多可以顯示 12 個月)Monthly (a maximum of 12 months can be displayed)

若開始與結束日期超出所選間隔允許的上限值,將只會顯示上限值 (從開始日期開始顯示)。例如,若您選取 [每日] 間隔,並將開始與結束日期分別設為 2012 年 7 月 7 日及 2012 年 2 月 28 日,將只會顯示 2012 年 8 月 7 日凌晨 12 點到 2012 年 9 月 7 日凌晨 12 點這段期間的資料 (亦即只會顯示 31 天的資料)。If the start and end dates exceed the maximum number of values allowed for the selected interval then only the maximum number of values (starting from the start date) are displayed. For example, if you select the Daily interval with a start date of 7/7/2012 and an end date of 2/28/2012, data is displayed for the days 8/7/2012 12:00 AM to 9/7/2012 12:00 AM (that is, a total of 31 days' worth of data).

報告依據Report by

指定報告中所要使用的值。請選取下列其中一項:Indicates the values to be used in the report. Select one of the following:

  • 工作階段計數Session count

  • 訊息計數Message count

對等 IM 工作階段計量 (依集區)Metrics for Peer-to-Peer IM Session by Pool

下表列出對等 IM 報告提供的資訊。The following table lists the information provided in the Peer-to-Peer IM Report.

對等 IM 工作階段計量 (依集區)Metrics for Peer-to-Peer IM Session by Pool

姓名Name 可以排序這個項目嗎?Can you sort on this item? 描述Description

集區Pool

No

註冊機構集區或 Edge Server 的名稱。Name of the Registrar pool or Edge Server.

日期/時間Date/Time

No

工作階段的執行日期與時間。Date and time that the sessions took place.

TotalTotal

No

工作階段總數或訊息總數。Total number of sessions or total message count.

對等 IM 工作階段計量 (依驗證類型)Metrics for Peer-to-Peer IM Session by Authentication Type

下表列出對等 IM 報告針對參與者在對等工作階段中使用之每項驗證類型所提供的資訊。The following table lists the information provided in the Peer-to-Peer IM Report for each type of authentication used by the participants in a peer-to-peer session.

對等 IM 工作階段計量 (依驗證類型)Metrics for Peer-to-Peer IM Session by Authentication Type

姓名Name 可以排序這個項目嗎?Can you sort on this item? 描述Description

驗證類型Authentication type

No

工作階段參與者所使用的驗證類型。一般來說,值都是下列其中之一:Type of authentication used by the session participants. Values are typically one of the following:

  • EnterpriseEnterprise

  • 聯邦Federated

  • PicPIC

日期/時間Date/Time

No

工作階段的執行日期與時間。Date and time that the sessions took place.

TotalTotal

No

工作階段總數或訊息總數。Total number of sessions or total message count.