驗證試驗集區與舊版集區共存Verify pilot pool coexistence with legacy pool

 

主題上次修改日期: 2012-09-29Topic Last Modified: 2012-09-29

部署試驗集區之後,您必須使用系統管理工具來查看集區資訊,以確認兩個集區共存。After you deploy the pilot pool, you need to verify the coexistence of the two pools by using the administrative tools to view the pool information. 對於 Lync Server 2013 集區和舊版集區,您必須使用 Lync Server 2013 控制台和拓撲產生器工具。For the Lync Server 2013 pools and legacy pools, you must use the Lync Server 2013 Control Panel and Topology Builder tools.

確認已啟動 Lync Server 2013 服務Verify that Lync Server 2013 services have started

  1. 從 Lync Server 2013 前端伺服器,流覽至 [系統管理工具 \ 服務] 小程式。From the Lync Server 2013 Front End Server, navigate to the Administrative Tools\Services applet.

  2. 確認下列服務正在前端伺服器上執行:Verify that the following services are running on the Front End Server:

Lync Server 2013 服務Lync Server 2013 services

已啟動的 Lync Server 服務清單List of Lync Server Services Started

開啟 Lync Server 2013 控制台Open the Lync Server 2013 Control Panel

在 Lync Server 2013 部署中的前端伺服器上,開啟 [Lync Server 2013 控制台],然後選取 [Lync Server 2010 集區]。From the Front End Server in your Lync Server 2013 deployment, open the Lync Server 2013 Control Panel and select the Lync Server 2010 pool. 重複此程式以開啟 Lync Server 2013 集區。Repeat the procedure to open the Lync Server 2013 pool.

開啟 Lync Server 2013 控制台Open Lync Server 2013 Control Panel

[選取 URL] 對話方塊Select URL dialog box

重要

在 Lync Server 2013 上,您必須在使用 Lync Server 控制台之前,將 Silverlight 升級至 Silverlight 第5版。On Lync Server 2013, you must upgrade Silverlight to Silverlight version 5 prior to using the Lync Server Control Panel.

此拓撲現在包括 Lync Server 2010 和 Lync Server 2013 伺服器角色。This topology now includes Lync Server 2010 and Lync Server 2013 server roles.

Lync Server 2013 控制台拓撲頁面Lync Server 2013 Control Panel Topology page

Lync Server 控制台-拓撲頁面Lync Server Control Panel - Topology page

不要嘗試在 Lync Server 2010 拓撲產生器中開啟拓撲Don’t attempt to open the topology in Lync Server 2010 Topology Builder

如果您嘗試使用 Lync Server 2010 拓撲產生器來開啟拓撲,您會遇到下列錯誤。If you attempt to open the topology using Lync Server 2010 Topology Builder, you will encounter the error below. 拓撲只能以 Lync Server 2013 拓撲產生器來查看。The topology can only be viewed using Lync Server 2013 Topology Builder. Lync Server 2013 拓撲產生器必須用來建立 Lync Server 2013 和 Lync Server 2010 的集區。The Lync Server 2013 Topology Builder must be used to create pools for both Lync Server 2013 and Lync Server 2010.

Lync Server 2010 拓撲產生器錯誤訊息Lync Server 2010 Topology Builder error message

Lync Server 拓撲產生器 MMC 貼齊錯誤Lync Server Topology Builder MMC Snap Error