使用 Microsoft 端點 Configuration Manager 部署 Microsoft 團隊聊天室Deploy Microsoft Teams Rooms by using Microsoft Endpoint Configuration Manager

本文提供使用 Microsoft 端點設定管理員建立 Microsoft 團隊聊天室部署的所有必要資訊。This article gives you all the necessary information to create your Microsoft Teams Rooms deployments by using Microsoft Endpoint Configuration Manager.

透過 Configuration Manager 提供的便於使用的方法,您可以將作業系統及其他應用程式部署到多個目標裝置。With the easy-to-use methods provided by Configuration Manager, you can deploy the operating system and other applications to multiple target devices.

使用下面所示的方法引導您完成 Configuration Manager 設定,並視貴組織的需求自訂整個本指南所提供的範例套件與腳本。Use the approach illustrated below to guide you through your Configuration Manager configuration, and customize the sample packages and scripts provided throughout this guidance as needed for your organization.

使用 Configuration Manager 的 Microsoft 團隊聊天室部署程式

重要

此解決方案只經過以 Surface Pro 式部署進行測試。This solution has only been tested with Surface Pro–based deployments. 針對不是以 Surface Pro 為基礎的設定,請遵循製造商的指導方針。Follow the manufacturer's guidelines for configurations that aren't based on Surface Pro.

驗證先決條件Validate prerequisites

若要使用 Configuration Manager 來部署 Microsoft 團隊聊天室,請確定您符合下列先決條件及需求。To deploy Microsoft Teams Rooms with Configuration Manager, ensure that you meet the following prerequisites and requirements.

Microsoft Endpoint Configuration 管理員需求Microsoft Endpoint Configuration Manager requirements

  • Microsoft 端點 Configuration Manager 版本必須至少為1706或更新版本。Microsoft Endpoint Configuration Manager version must be at least 1706 or above. 我們建議使用1710或更新版本。We recommend using 1710 or later. 請參閱 Configuration manager 中的 windows 10 支援 ,以瞭解 configuration manager 支援的 windows 10 版本。Check out Support for Windows 10 in Configuration Manager to learn about the Windows 10 versions that Configuration Manager supports.

  • 必須安裝適用于 Windows 10 (ADK) 的 Windows 評估版和部署套件支援版本。A supported version of Windows Assessment and Deployment Kit (ADK) for Windows 10 must be installed. 請參閱您可以搭配不同版本 Configuration Manager 使用的 Windows 10 ADK 版本,並確保您的部署包含正確的版本。See the versions of the Windows 10 ADK that you can use with different versions of Configuration Manager, and ensure that your deployment includes the correct version.

  • 網站系統伺服器必須已獲指派發佈點角色,且應啟用啟動影像以進行預先啟動 執行環境 (PXE) 支援 ,以啟用網路啟動的部署。The site system servers must have been assigned the distribution point role, and the boot images should be enabled for preboot execution environment (PXE) support to enable network-initiated deployments. 如果未啟用 PXE 支援,您可以針對您的部署使用 可引導媒體If PXE support isn't enabled, you can use bootable media for your deployments.

  • 網路存取帳戶必須設定為支援 (裸機) 部署案例的新電腦。A network access account must be configured to support new computer (bare metal) deployment scenarios. 若要深入瞭解網路存取帳戶的設定,請參閱 Configuration Manager 中使用的帳戶To learn more about the configuration of a network access account, see Accounts used in Configuration Manager.

  • 如果您很可能同時將相同的 Microsoft 團隊會議室影像部署到多個單元,建議您啟用 多播支援We recommend that you enable multicast support, if you're likely to deploy the same Microsoft Teams Rooms image to multiple units at the same time.

網路需求Networking requirements

  • 您的網路應該擁有動態主機設定通訊協定 (DHCP) server,並將自動 IP 位址發佈設定為要部署 Microsoft 團隊會議室單元的子網。Your network should have a Dynamic Host Configuration Protocol (DHCP) server, configured for automatic IP address distribution to the subnets where Microsoft Teams Rooms units will be deployed.

    注意

    DHCP 租約期限必須設定為超過映射部署持續時間的值。DHCP lease duration must be set to a value longer than the image deployment duration. 否則,部署可能會失敗。Otherwise, the deployment might fail.

  • 您的網路(包括交換器和虛擬 Lan (Vlan) )應該設定為支援 PXE。Your network, including switches and virtual LANs (VLANs), should be configured to support PXE. 如需 IP 協助程式和 PXE 設定的詳細資訊,請參閱您的網路廠商。Refer to your network vendor for more information about IP Helper and PXE configuration. 或者,如果沒有啟用 PXE 支援,您也可以將 可引導媒體 用於部署。Alternatively, you can use bootable media for your deployments, if PXE support isn't enabled.

    注意

    在 Surface Pro 裝置上,只有當您使用乙太網路介面卡或來自 Microsoft 的插接站時,才會支援從網路啟動 (PXE 啟動) 。For Surface Pro devices, booting from the network (PXE boot) is only supported when you use an Ethernet adapter or docking station from Microsoft. 協力廠商乙太網路介面卡不支援使用 Surface Pro 進行 PXE 啟動。Third-party Ethernet adapters don't support PXE boot with Surface Pro. 如需詳細資訊,請參閱 乙太網路介面卡與 Surface 部署See Ethernet adapters and Surface deployment for more information.

針對作業系統部署設定 Microsoft 端點 Configuration ManagerConfigure Microsoft Endpoint Configuration Manager for operating system deployment

本文假設您已經有良好的 Configuration Manager 部署,而且不會詳細說明部署和設定 Configuration Manager 的所有步驟所需的步驟。This article assumes you already have a healthy Configuration Manager deployment, and doesn't detail all the steps required to deploy and configure Configuration Manager from scratch. Microsoft 端點設定管理員的 檔和設定指導 方針是一種很好的資源;如果您尚未部署 Configuration Manager,我們建議您從這些資源開始。The documentation and the configuration guidance on the Microsoft Endpoint Configuration Manager is a great resource; we recommend you start with these resources if you haven't yet deployed Configuration Manager.

使用下列指示來確認作業系統部署 (的 OSD) 功能是否已正確設定。Use the following instructions to verify that the operating system deployment (OSD) features are configured properly.

驗證和升級 Configuration ManagerValidate and upgrade Configuration Manager

  1. 在 Configuration Manager 主控台中,移至 [ 管理 > 更新及服務]。In the Configuration Manager console, go to Administration > Updates and Servicing.

  2. 檢查已安裝的組建以及尚未安裝的適用更新。Check the installed build and applicable updates that haven't been installed yet.

  3. 在 Configuration Manager 中查看 Windows 10 版支援;如果您需要升級您的部署,請選取您要安裝的更新,然後選取 [下載]。Review Support for Windows 10 in Configuration Manager; if you need to upgrade your deployment, select the update you want to install, and then select Download.

  4. 下載完成後,請選取更新,然後選取 [ 安裝更新套件]。After the download is complete, select the update, and then select Install Update Pack.

設定發佈點以支援 PXE 和多播Configure distribution points to support PXE and multicast

  1. 在 Configuration Manager 主控台中,移至 [ 管理 > 發佈點]。In the Configuration Manager console, go to Administration > Distribution Points.

  2. 選取將提供 Microsoft [小組聊天室] 部署的發佈點伺服器,然後選取 [ 屬性]。Select the distribution point server that will serve the Microsoft Teams Rooms deployment, and then select Properties.

  3. 選取 [ PXE ] 索引標籤,並確認已啟用下列設定:Select the PXE tab, and ensure that the following settings are enabled:

    • 為用戶端啟用 PXE 支援Enable PXE support for clients
    • 允許此發佈點回應傳入的 PXE 要求Allow this distribution point to respond to incoming PXE requests
    • 啟用未知電腦支援Enable unknown computer support
  4. 選用: 若要啟用多播支援,請選取 [ 多播 ] 索引標籤,並確認已啟用下列設定:Optional: To enable multicast support, select the Multicast tab, and ensure that the following settings are enabled:

    • 啟用多播以同時傳送資料給多個用戶端Enable multicast to simultaneously send data to multiple clients
    • 根據您的網路小組的建議設定 UDP 埠範圍Configure the UDP port range as per your network team's recommendation

設定網路存取帳戶Configure the Network Access Account

  1. 在 Configuration Manager 主控台中,移至 [ 管理 > 網站 設定 > 網站],然後選取 [網站]。In the Configuration Manager console, go to Administration > Site Configuration > Sites, and then select the site.

  2. 在 [ 設定 ] 群組中,選取 [ 設定網站元件 > 軟體發佈]。In the Settings group, select Configure Site Components > Software Distribution.

  3. 選取 [ 網路存取帳戶 ] 索引標籤。設定一或多個帳戶,然後選取 [確定]Select the Network Access Account tab. Set up one or more accounts, and then select OK.

注意

帳戶不需要任何特殊權利,除了從發佈點伺服器的 [ 從網路存取此電腦 ] 許可權以外。The accounts don't need any special rights, except for the Access this computer from the network right on the distribution point server. 一般網域使用者帳戶將是適當的。A generic domain user account will be appropriate. 如需詳細資訊,請參閱 Configuration Manager 中使用的帳戶For more information, see Accounts used in Configuration Manager.

設定啟動影像Configure a boot image

  1. 在 Configuration Manager 主控台中,移至 軟體庫 > 作業系統 > 啟動影像In the Configuration Manager console, go to Software Library > Operating System > Boot Images.

  2. 選取 [ 啟動影像 (x64)],然後選取 [ 屬性]。Select Boot image (x64), and then select Properties.

  3. 選取 [ 資料來源 ] 索引標籤,然後 從啟用 PXE 的發佈點啟用此啟動影像Select the Data Source tab, and enable Deploy this boot image from the PXE-enabled distribution point.

  4. 選取 [ 選用元件 ] 索引標籤來安裝必要的元件:Select the Optional Components tab to install required components:

    1. 選取星形圖示,然後搜尋 HTML (WinPE-HTA)Select the star icon, and search for HTML (WinPE-HTA)

    2. 選取 [確定] ,將 HTML 應用程式支援新增至啟動影像。Select OK to add HTML application support in to the boot image.

  5. 選用: 若要自訂部署體驗,請選取 [ 自訂 ] 索引標籤。Optional: To customize the deployment experience, select the Customization tab.

    • 啟用 命令支援 (僅測試) 如果您想要在部署期間存取命令提示字元,請使用此選項。Enable command support (testing only) if you want to have access to a command prompt during the deployment. 啟用此功能時,您可以在部署期間的任何時間選取 F8 來啟動命令提示字元。When this is enabled, you can start a command prompt by selecting F8 at any time during the deployment.
    • 您也可以指定要在部署期間顯示的自訂背景圖像。You can also specify a custom background image to be displayed during the deployment. 若要設定影像,請啟用 [ (UNC 路徑指定自訂背景圖像 檔案],然後選取您的背景。To set an image, enable Specify the custom background image file (UNC path and select your background.
  6. 出現提示時,請選取 [是] ,然後將更新的啟動影像發佈到您的發佈點。When asked, select Yes and distribute the updated boot image to your distribution points.

如需詳細資訊,請參閱 使用 Configuration Manager 管理啟動影像For more information, see Manage boot images with Configuration Manager.

注意

您可以建立可啟動的 USB 媒體,以針對沒有 PXE 支援的環境啟動 Configuration Manager 任務順序部署。You can create a bootable USB media to initiate Configuration Manager task sequence–based deployments for environments that have no PXE support. 可啟動的媒體只包含啟動影像、選用的預先啟動命令以及其必要的檔案,以及 Configuration Manager 二進位檔案以支援在 Windows PE 中啟動,並在其餘的部署程式中連線至 Configuration Manager。The bootable media contains only the boot image, optional prestart commands and their required files, and Configuration Manager binaries to support booting into Windows PE and connecting to Configuration Manager for the rest of the deployment process. 如需詳細資訊,請參閱 建立可引導媒體For more information, see Create bootable media.

建立 Configuration Manager 套件Create Configuration Manager packages

重要

每個 SRS 安裝程式版本所需的作業系統版本都會隨每個 MSI 發行而變更。The required operating system version for each SRS installer version changes with every MSI release. 若要判斷特定 MSI 的最佳作業系統版本,請執行一次主控台安裝程式腳本。To determine the best operating system version for a given MSI, run the console setup script once. 若要深入瞭解,請參閱 使用 Microsoft 端點建構管理員部署 Microsoft 團隊聊天室To learn more, see Deploy Microsoft Teams Rooms by using Microsoft Endpoint Configuration Manager.

Configuration Manager 需要多個套件來部署並設定 Microsoft 團隊會議室單位。Configuration Manager requires a number of packages to deploy and configure the Microsoft Teams Rooms units.

您需要建立並設定下列套件,然後將它們發佈到已指派發佈點伺服器角色的 Configuration Manager 網站系統。You need to create and configure the following packages, and then distribute them to the Configuration Manager site systems that have been assigned the distribution point server role.

套件名稱Package name 類型Type 描述Description
SRS v2-SRS 應用程式套件SRS v2 - SRS Application Package 軟體套件Software package Microsoft 團隊聊天室部署套件封裝Package for the Microsoft Teams Rooms deployment kit
SRS v2-Sysprep 套件SRS v2 - Sysprep Package 軟體套件Software package [自訂 Unattended.xml 的封裝] 來設定 Microsoft 團隊會議室單位Package for the custom Unattended.xml to configure Microsoft Teams Rooms units
SRS v2-Set-SRSComputerName 套件SRS v2 - Set-SRSComputerName Package 軟體套件Software package HTML 應用程式 (HTA 的封裝) 在部署期間指派電腦名稱稱Package for the HTML application (HTA) to assign a computer name during the deployment
SRS v2-設定 SRS 設定SRS v2 - Configure SRS Setup 軟體套件Software package 打包以設定 Microsoft 團隊聊天室應用程式的部署Package to configure deployment of the Microsoft Teams Rooms app
SRS v2-OS 更新套件SRS v2 - OS Updates Package 軟體套件Software package 打包以部署強制的作業系統更新Package to deploy mandatory operating system updates
SRS v2-根憑證套件SRS v2 - Root Certificate Package 軟體套件Software package 選用-套件來部署根憑證 (不需要網域加入的單位) Optional - Package to deploy the root certificate (not required for domain-joined units)
SRS v2-Microsoft Monitoring Agent 套件SRS v2 - Microsoft Monitoring Agent Package 軟體套件Software package 選用-套件部署並設定 Microsoft Operations Management Suite 代理程式Optional - Package to deploy and configure the Microsoft Operations Management Suite agent
SRS v2-WinPE 背景套件SRS v2 - WinPE Background Package 軟體套件Software package 要搭配啟動影像使用的自訂背景圖像套件Package for the custom background image to use with boot images
Windows 10 企業版Windows 10 Enterprise 作業系統影像Operating system image (安裝 .wim) 中的作業系統安裝檔套件Package for the operating system installation file (install.wim)
Surface ProSurface Pro 驅動程式套件Driver package Microsoft Surface Pro 裝置驅動程式和固件套件Package for the device drivers and firmware for Microsoft Surface Pro
Surface Pro 4Surface Pro 4 驅動程式套件Driver package Microsoft Surface 專業版4的裝置驅動程式和固件套件Package for the device drivers and firmware for Microsoft Surface Pro 4

如需詳細資訊,請參閱 Configuration Manager 中的套件與程式For more information, see Packages and programs in Configuration Manager.

建立套件來源檔案的資料夾Create folders for the package source files

在第一次建立及更新時,Configuration Manager 需要將套件來源檔案組織在特定資料夾結構中。Configuration Manager requires package source files to be organized in a specific folder structure when they're first created and when they're updated.

在 Microsoft 端點 Configuration Manager 管理中心網站或主要網站上建立下列資料夾結構,或在您用來存放套件來源檔案的伺服器共用上建立下列資料夾結構:Create the following folder structure on the Microsoft Endpoint Configuration Manager central administration site or primary site, or on a server share you're using to host package source files:

  • SRS v2-Microsoft Monitoring Agent 套件SRS v2 - Microsoft Monitoring Agent Package
  • SRS v2-OS 更新套件SRS v2 - OS Updates Package
  • SRS v2-根憑證套件SRS v2 - Root Certificate Package
  • SRS v2-Set-SRSComputerName 套件SRS v2 - Set-SRSComputerName Package
  • SRS v2-SRS 應用程式套件SRS v2 - SRS Application Package
  • SRS v2-設定 SRS 設定SRS v2 - Configure SRS Setup
  • SRS v2-Sysprep 套件SRS v2 - Sysprep Package
  • 驅動程式Drivers
    • Surface ProSurface Pro
    • Surface Pro 4Surface Pro 4
  • 作業系統Operating Systems
    • Windows 10 企業版Windows 10 Enterprise

提示

您也可以 下載 並使用 zip 檔案,其中包含套件的資料夾結構、您需要使用的腳本,以及您必須匯入的任務順序範本。You may also download and use the zip file that includes the folder structure for the packages, the scripts that you need to use, and the task sequence template, that you need to import.

建立監視代理套件Create the Monitoring agent package

  1. 從下載監視代理程式 https://go.microsoft.com/fwlink/?LinkId=828603Download the Monitoring agent from https://go.microsoft.com/fwlink/?LinkId=828603.

  2. 在命令提示字元中開啟 [命令提示字元] 視窗,然後輸入 MMASetup-AMD64.exe/c: ,將套件解壓縮至 [ SRS V2-Microsoft Monitoring Agent 套件] 資料夾。Extract the package into the SRS v2 - Microsoft Monitoring Agent Package folder by opening a Command Prompt window and entering MMASetup-AMD64.exe /C: at the command prompt.

  3. 在 Configuration Manager 主控台中,移至 [ 軟體庫 > 應用程式管理 > 套件],然後選取 [ 建立套件]。In the Configuration Manager console, go to Software Library > Application Management > Packages, and then select Create Package.

  4. 輸入下列資訊來建立套件:Enter the following information to create the package:

    • 名稱: SRS v2-Microsoft Monitoring Agent 套件Name: SRS v2 - Microsoft Monitoring Agent Package

    • 製造商: Microsoft CorporationManufacturer: Microsoft Corporation

    • 版本: 8.1.11081.0 (輸入下載的安裝檔版本) Version: 8.1.11081.0 (enter the version of the downloaded installation file)

    • 選取 [ 此套件包含來源 檔案] 核取方塊,輸入 SRS V2-Microsoft Monitoring Agent 套件 資料夾的路徑,然後選取 [下一步]Select the This package contains source files check box, enter the path to the SRS v2 - Microsoft Monitoring Agent Package folder, and then select Next.

  5. 選取 [ 不建立程式],然後選取 [下一步]Select Do not create a program, and then select Next.

  6. 查看 [ 確認設定 ] 頁面,然後選取 [下一步]Review the Confirm the settings page, and then select Next.

  7. 選取 [ 關閉]。Select Close.

建立作業系統更新套件Create the operating system updates package

  1. 在 [ SRS v2-OS 更新套件 ] 資料夾中,建立名為 Install-SRSv2-OS-Updates.ps1 的新 PowerShell 腳本。In the SRS v2 - OS Updates Package folder, create a new PowerShell script named Install-SRSv2-OS-Updates.ps1.

  2. 將下列腳本複製到 Install-SRSv2-OS-Updates.ps1 腳本中。Copy the script below into the Install-SRSv2-OS-Updates.ps1 script. 或者,您也可以從 這裡下載 Install-SRSv2-OS-Updates.ps1 腳本。Alternatively, you can download the Install-SRSv2-OS-Updates.ps1 script from here.

    # Install-SRSv2-OS-Updates.ps1
    $strPath = split-path -parent $MyInvocation.MyCommand.Definition
    $total = gci $strPath *.msu | measure | Select-Object -expand Count
    $i = 0
    gci $strPath *.msu | ForEach-Object {
      $i++
      WUSA ""$_.FullName /quiet /norestart""
      Write-Progress -activity "Applying Mandatory Updates" -status "Installing
      $_ .. $i of $total" -percentComplete (($i / $total) * 100)
      Wait-Process -name wusa
    }
    
  3. 將強制執行的 Windows 更新套件下載到同一個資料夾中。Download the mandatory Windows Update packages into the same folder.

    注意

    發佈本文時,只需要 KB4056892At the time this article was published, only KB4056892 was required. 請核取 [設定 Microsoft 團隊聊天室] 主控台,查看是否需要任何其他更新。Check Configure a Microsoft Teams Rooms console, to see whether any other updates are required.

  4. 在 Configuration Manager 主控台中,移至 [ 軟體庫 > 應用程式管理 > 套件],然後選取 [ 建立套件]。In the Configuration Manager console, go to Software Library > Application Management > Packages, and then select Create Package.

  5. 輸入下列資訊來建立套件:Enter the following information to create the package:

    • 名稱: SRS v2-OS 更新套件Name: SRS v2 – OS Updates Package
    • 製造商: Microsoft CorporationManufacturer: Microsoft Corporation
    • 版本: 1.0.0Version: 1.0.0
    • 選取 [ 此套件包含來源 檔案] 核取方塊,輸入 SRS V2-OS 更新套件 資料夾的路徑,然後選取 [下一步]Select the This package contains source files check box, enter the path to the SRS v2 - OS Updates Package folder, and then select Next.
  6. 選取 [ 不建立程式],然後選取 [下一步]Select Do not create a program, and then select Next.

  7. 查看 [ 確認設定 ] 頁面,然後選取 [下一步]Review the Confirm the settings page, and then select Next.

  8. 選取 [ 關閉]。Select Close.

建立根憑證套件 (選用) Create the root certificate package (optional)

您可以建立此套件,以發佈不會加入 Active Directory 網域之裝置的根憑證。You create this package to distribute the root certificate for devices that won't be joined to an Active Directory domain. 只有在符合下列條件時,才能建立此套件:Create this package only if both the following conditions apply:

  • 您的部署包括內部部署 Lync 或商務用 Skype 伺服器。Your deployment includes on-premises Lync or Skype for Business Server.
  • Microsoft 球隊房間單元已設定為在工作組中工作,而不是網域成員。Microsoft Teams Rooms units are configured to work in a workgroup instead of a domain member.
  1. 將根憑證複製到 [ SRS v2] (根憑證套件 資料夾)中。Copy the root certificate into the SRS v2 – Root Certificate Package folder.

  2. 在 Configuration Manager 主控台中,移至 [ 軟體庫 > 應用程式管理 > 套件],然後選取 [ 建立套件]。In the Configuration Manager console, go to Software Library > Application Management > Packages, and then select Create Package.

  3. 輸入下列資訊來建立套件:Enter the following information to create the package:

    • 名稱: SRS v2 –根憑證套件Name: SRS v2 – Root Certificate Package
    • 製造商: 貴組織的名稱Manufacturer: Your organization's name
    • 版本: 1.0.0Version: 1.0.0
    • 選取 [ 此套件包含來源 檔案] 核取方塊,輸入 [ SRS V2 –根憑證套件 ] 資料夾的路徑,然後選取 [下一步]Select the This package contains source files check box, enter the path to the SRS v2 – Root Certificate Package folder, and then select Next.
  4. 選取 [ 不建立程式],然後選取 [下一步]Select Do not create a program, and then select Next.

  5. 查看 [ 確認設定 ] 頁面,然後選取 [下一步]Review the Confirm the settings page, and then select Next.

  6. 選取 [ 關閉]。Select Close.

建立 Microsoft 團隊聊天室部署套件封裝Create the Microsoft Teams Rooms deployment kit package

  1. 從下載最新版本的 Microsoft 團隊聊天室部署套件 https://go.microsoft.com/fwlink/?linkid=851168 ,然後將其安裝到工作站。Download the latest version of the Microsoft Teams Rooms deployment kit from https://go.microsoft.com/fwlink/?linkid=851168, and install it to a workstation.

  2. 從 C: Program 檔案將內容複寫到 [ SRS v2-srs] 應用程式 套件資料夾, \ (X86) \ Skype 室系統部署套件 中。Copy the content from C:\Program Files (x86)\Skype Room System Deployment Kit to the SRS v2 - SRS Application Package folder.

  3. 在 Configuration Manager 主控台中,移至 [ 軟體庫 > 應用程式管理 > 套件],然後選取 [ 建立套件]。In the Configuration Manager console, go to Software Library > Application Management > Packages, and then select Create Package.

  4. 輸入下列資訊來建立套件:Enter the following information to create the package:

    • 名稱: srs v2 – Srs 應用程式套件Name: SRS v2 – SRS Application Package
    • 製造商: Microsoft CorporationManufacturer: Microsoft Corporation
    • 版本: 3.1.104.0 (輸入下載的安裝檔版本) Version: 3.1.104.0 (enter the version of the downloaded installation file)
    • 選取 [ 此套件包含來源 檔案] 核取方塊,輸入 SRS V2 – SRS 應用程式套件 資料夾的路徑,然後選取 [下一步]Select the This package contains source files check box, enter the path to the SRS v2 – SRS Application Package folder, and then select Next.
  5. 選取 [ 不建立程式],然後選取 [下一步]Select Do not create a program, and then select Next.

  6. 查看 [ 確認設定 ] 頁面,然後選取 [下一步]Review the Confirm the settings page, and then select Next.

  7. 選取 [ 關閉]。Select Close.

建立電腦名稱稱指派套件Create the computer name assignment package

  1. SRS v2-Set-SRSComputerName 套件 資料夾中,建立名為 SET-SRSCOMPUTERNAME 的新 HTML 應用程式。In the SRS v2 - Set-SRSComputerName Package folder, create a new HTML application named Set-SRSComputerName.hta .

  2. 將下列腳本複製到 Set-SRSComputerName 檔中。Copy the following script into the Set-SRSComputerName.hta file. 或者,您也可以從 這裡下載 Set-SRSComputerName 的 .hta 檔案。Alternatively, you can download the Set-SRSComputerName.hta file from here.

    <!DOCTYPE HTML>
    <html>
    <head>
    <title>Set SRS Computer Name</title>
    <HTA:APPLICATION
      APPLICATIONNAME="Set SRS Computer Name"
      ID="SetSRSComputerName"
      VERSION="1.0"
      SCROLL="no"
      SINGLEINSTANCE="yes"
      WINDOWSTATE="maximize"
      MaximizeButton="no"
      MinimizeButton="no"
      SysMenu="no"
      ShowInTaskbar="no"
      Caption="no"
      />
    <style type="text/css">
    body {
        background-color: #fdfeff;
        color: darkblue;
        font-family: Calibri;
        font-size: 12pt;
        margin: 4em 3em;
    }
    </style>
    </head>
    <script language="VBScript">
    Public strNewComputerName
    Sub GenerateComputerName()
        strComputer = "."
        Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
        Set colItems = objWMIService.ExecQuery("Select * from Win32_BIOS",,48)
        For Each objItem in colItems
            strSerialNumber = objItem.SerialNumber
        Next
        strNewComputerName = "SRS-"  & right(replace(strSerialNumber, "-","") ,10)
        TextArea1.innerHTML = "The serial number of the device: " & strSerialNumber
        strHTMLText = strHTMLText & "<br> Computer name to be assigned: <font color = red>" & strNewComputerName & "</font>"
        strHTMLText = strHTMLText & "<br><br> Click Accept to use this as the computer name and continue deployment, or Change to set a new name."
        strHTMLText = strHTMLText & "<p><input type=""button"" value=""Accept"" name = ""Accept_Button"" onclick=""SetComputerName"" />"
        strHTMLText = strHTMLText & " <input type=""button"" value=""Change"" name = ""Change_Button"" onclick=""ChangeComputerName"" />"
        TextArea2.innerHTML = strHTMLText
    End Sub
    
    Sub SetComputerName()
        dim result
        result = MsgBox("Computer Name to be assigned: " & strNewComputerName &vbcrlf & "Are you sure you want to continue?", 36)
        If (result = vbYes) then
            SET env = CreateObject("Microsoft.SMS.TSEnvironment")
            env("OSDComputerName") = strNewComputerName
            self.close
        elseif (result = vbNo) then
            Window_OnLoad
        End If
    End Sub
    
    Sub UpdateComputerName()
        strNewComputerName = newcomputername.value
        if len(trim(strNewComputerName)) = 0 then
            MsgBox "Computer name cannot be empty." &vbcrlf & "Update and try again.",16
            exit sub
        end if
        SetComputerName
    End Sub
    
    Sub ChangeComputerName()
        TextArea2.innerHTML = "<p>Type the new computer name and click Accept:  <input type=""text"" name=""newcomputername"" value =" & strNewComputerName & " />"
        TextArea2.innerHTML = TextArea2.innerHTML & "<br><input type=""button"" value=""Update"" name = ""Update_Button"" onclick=""UpdateComputerName"" />"
    End Sub
    
    Sub Window_OnLoad
        Set oTSProgressUI = CreateObject("Microsoft.SMS.TsProgressUI")
        oTSProgressUI.CloseProgressDialog
        GenerateComputerName
    End Sub
    </script>
    
    <body>
    <span id = "TextArea1"></span>
    <span id = "TextArea2">
    </span>
    </body>
    </html>
    
    
  3. 在 Configuration Manager 主控台中,移至 [ 軟體庫 > 應用程式管理 > 套件],然後選取 [ 建立套件]。In the Configuration Manager console, go to Software Library > Application Management > Packages, and then select Create Package.

  4. 輸入下列資訊來建立套件:Enter the following information to create the package:

    • 名稱: SRS v2-Set-SRSComputerName 套件Name: SRS v2 - Set-SRSComputerName Package

    • 製造商: Microsoft CorporationManufacturer: Microsoft Corporation

    • 版本: 1.0.0Version: 1.0.0

    • 選取 [ 此套件包含來源 檔案] 核取方塊,輸入 SRS V2-Set-SRSComputerName 套件 資料夾的路徑,然後選取 [下一步]Select the This package contains source files check box, enter the path to the SRS v2 - Set-SRSComputerName Package folder, and then select Next.

  5. 選取 [ 不建立程式],然後選取 [下一步]Select Do not create a program, and then select Next.

  6. 查看 [ 確認設定 ] 頁面,然後選取 [下一步]Review the Confirm the settings page, and then select Next.

  7. 選取 [ 關閉]。Select Close.

建立 Sysprep 套件Create the Sysprep package

  1. 在 [ SRS v2 – Sysprep 套件 ] 資料夾中,建立名為 Unattend.xml 的新 XML 檔案。In the SRS v2 – Sysprep Package folder, create a new XML file named Unattend.xml .

  2. 將下列文字複製到 Unattend.xml 檔案中。Copy the following text into the Unattend.xml file. 或者,您也可以從 這裡下載 Unattend.xml 檔案。Alternatively, you can download the Unattend.xml file from here.

    <?xml version="1.0" encoding="utf-8"?>
    <unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="specialize">
        <component name="Microsoft-Windows-Embedded-BootExp" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="NonSxS" xmlns:wcm="https://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <DisableBootMenu>1</DisableBootMenu>
            <DisplayDisabled>1</DisplayDisabled>
        </component>
        <component name="Microsoft-Windows-powercpl" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="https://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <PreferredPlan>8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c</PreferredPlan>
        </component>
    </settings>
    <settings pass="oobeSystem">
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="https://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <OOBE>
                <HideEULAPage>true</HideEULAPage>
                <HideLocalAccountScreen>true</HideLocalAccountScreen>
                <HideOEMRegistrationScreen>true</HideOEMRegistrationScreen>
                <HideOnlineAccountScreens>true</HideOnlineAccountScreens>
                <HideWirelessSetupInOOBE>true</HideWirelessSetupInOOBE>
                <SkipMachineOOBE>true</SkipMachineOOBE>
                <SkipUserOOBE>true</SkipUserOOBE>
                <ProtectYourPC>1</ProtectYourPC>
            </OOBE>
            <AutoLogon>
                <Enabled>true</Enabled>
                <Username>Skype</Username>
                <Password>
                    <Value>UABhAHMAcwB3AG8AcgBkAA==</Value>
                    <PlainText>false</PlainText>
                </Password>
            </AutoLogon>
            <UserAccounts>
                <LocalAccounts>
                    <LocalAccount wcm:action="add">
                        <Password>
                            <Value>cwBmAGIAUABhAHMAcwB3AG8AcgBkAA==</Value>
                            <PlainText>false</PlainText>
                        </Password>
                        <Name>Admin</Name>
                        <Group>Administrators</Group>
                        <DisplayName>Administrator</DisplayName>
                        <Description>Administrator</Description>
                    </LocalAccount>
                </LocalAccounts>
            </UserAccounts>
        </component>
    </settings>
    <cpi:offlineImage cpi:source="wim:h:/install.wim#Windows 10 Enterprise" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
    </unattend>
    
  3. 在 Configuration Manager 主控台中,移至 [ 軟體庫 > 應用程式管理 > 套件],然後選取 [ 建立套件]。In the Configuration Manager console, go to Software Library > Application Management > Packages, and then select Create Package.

  4. 輸入下列資訊來建立套件:Enter the following information to create the package:

    • 名稱: SRS v2-Sysprep 套件Name: SRS v2 - Sysprep Package
    • 製造商: Microsoft CorporationManufacturer: Microsoft Corporation
    • 版本: 1.0.0Version: 1.0.0
    • 選取 [ 此套件包含來源 檔案] 核取方塊,輸入 SRS V2-Sysprep 套件 資料夾的路徑,然後選取 [下一步]Select the This package contains source files check box, enter the path to the SRS v2 – Sysprep Package folder, and then select Next.
  5. 選取 [ 不建立程式],然後選取 [下一步]Select Do not create a program, and then select Next.

  6. 查看 [ 確認設定 ] 頁面,然後選取 [下一步]Review the Confirm the settings page, and then select Next.

  7. 選取 [ 關閉]。Select Close.

建立 Windows 10 企業版套件Create the Windows 10 Enterprise package

  1. 取得 Windows 10 企業版 x64 媒體,然後將 安裝 .wim 檔案複製到 作業系統 \ Windows 10 企業版 資料夾中。Obtain a Windows 10 Enterprise x64 media, and copy the install.wim file to the Operating Systems\Windows 10 Enterprise folder.

  2. 在 Configuration Manager 主控台中,移至 軟體庫 > 作業系統 的 > 作業系統影像,然後選取 [ 新增作業系統影像]。In the Configuration Manager console, go to Software Library > Operating Systems > Operating System Images, and then select Add Operating System Image.

  3. 指定您剛複製的 安裝 .wim 檔案的路徑,然後選取 [下一步]Specify the path to the install.wim file you just copied, and then select Next.

  4. 更新 版本 欄位,使其符合 Windows 10 企業版影像的組建編號,然後選取 [下一步]Update the Version field to match the build number of the Windows 10 Enterprise image, and then select Next.

  5. 查看 [ 詳細資料 ] 頁面,然後選取 [下一步]Review the Details page, and then select Next.

  6. 選取 [ 關閉]。Select Close.

如需詳細資訊,請參閱 使用 Configuration Manager 管理作業系統映射For more information, see Manage OS images with Configuration Manager.

建立 Surface Pro 裝置驅動程式套件Create Surface Pro device driver packages

Surface Pro 和 Surface Pro 4 都支援 Microsoft 球隊會議室。Microsoft Teams Rooms is supported for both Surface Pro and Surface Pro 4. 您需要針對您的環境中的每個 Surface Pro 模型建立驅動程式套件。You need to create a driver package for each Surface Pro model you have in your environment.

重要

驅動程式必須與 Windows 10 企業版組建和 Microsoft 團隊聊天室部署套件版本相容。The drivers must be compatible with the Windows 10 Enterprise build and the Microsoft Teams Rooms deployment kit version. 如需詳細資訊,請參閱 下載 Surface 裝置的最新固件和驅動程式 ,並 設定主機。For more information, see Download the latest firmware and drivers for Surface devices and Configure a console.

  1. 下載最新的驅動程式和固件。Download the latest drivers and firmware.

  2. 解壓縮已下載的驅動程式和固件。Extract the downloaded driver and firmware. 開啟命令提示字元視窗,然後在命令提示字元中,輸入下列其中一個命令:Open a Command Prompt window and at the command prompt, enter one of the following commands:

    • msiexec /a C:\SurfacePro_Win10.msi /passive TARGETDIR="C:\_Sources\\Drivers\Surface Pro"
    • msiexec /a C:\SurfacePro4_Win10.msi /passive TARGETDIR="C:\_Sources\\Drivers\Surface Pro 4"
  3. 在 Configuration Manager 主控台中,移至 [ 軟體庫 > 作業系統 > 驅動程式],然後選取 [匯 入驅動程式]。In the Configuration Manager console, go to Software Library > Operating Systems > Drivers, and then select Import Driver.

  4. 選取 [匯入下列網路路徑中的所有驅動程式] (UNC)],選取 [來源] 資料夾 (例如,C: \ _Sources \ 驅動程式 \ Surface Pro) ,然後選取 [下一步]Select Import all drivers in the following network path (UNC), select the source folder (for example, C:\_Sources\Drivers\Surface Pro), and then select Next.

  5. 在 [ 指定匯入的驅動程式的詳細資料 ] 頁面上,選取所有列出的驅動程式,然後選取 [ 啟用這些驅動程式並允許電腦安裝它們]。On the Specify the details for the imported drivers page, select all the listed drivers, and then select Enable these drivers and allow computers to install them.

  6. 選取 [ 類別],建立與 Surface 模型相符的新類別,選取 [確定],然後選取 [下一步]。Select Categories, create a new category that matches the Surface model, select OK, and then select Next.

  7. 選取 [ 新增套件]。Select New Package.

  8. 指定與 Surface Pro 模型相符的套件名稱,輸入要儲存驅動程式套件檔案的資料夾路徑,選取 [確定],然後選取 [下一步]。Specify the package name that matches the Surface Pro model, enter a folder path to store the driver package files in, select OK, and then select Next.

  9. 在 [ 啟動影像 ] 頁面上,確認沒有選取任何啟動影像,然後選取 [下一步]On the boot images page, ensure that no boot images are selected, and then select Next.

  10. 選取 [ 關閉]。Select Close.

  11. 移至 軟體庫 > 作業系統 > 驅動程式,選取 資料夾的 [ > 建立資料夾],然後輸入與您剛匯入驅動程式的 Surface Pro 模型相符的資料夾名稱。Go to Software Library > Operating Systems > Drivers, select Folder > Create Folder, and enter a folder name that matches the Surface Pro model that you just imported the drivers for.

  12. 將所有已匯入的驅動程式移至新建立的資料夾,以便更輕鬆地流覽和操作。Move all the imported drivers to the newly created folder for easier navigation and operation.

注意

針對您可能擁有的其他 Surface Pro 模型重複相同的步驟。Repeat the same steps for other Surface Pro models you might have. 如需詳細資訊,請參閱 Configuration Manager 中的管理驅動程式For more information, see Manage drivers in Configuration Manager.

建立 Microsoft 團隊會議室配置套件Create Microsoft Teams Rooms Configuration Package

  1. 在 Configuration Manager 主控台中,移至 [ 軟體庫 > 應用程式管理 > 套件],然後選取 [ 建立套件]。In the Configuration Manager console, go to Software Library > Application Management > Packages, and then select Create Package.

  2. 輸入下列資訊來建立套件:Enter the following information to create the package:

    • 名稱: SRS v2-設定 SRS 安裝套件Name: SRS v2 - Configure SRS Setup Package

    • 製造商: Microsoft CorporationManufacturer: Microsoft Corporation

    • 版本: 1.0.0Version: 1.0.0

    • 選取 [ 此套件包含來源 檔案] 核取方塊,輸入 SRS V2-[設定 srs 設定 ] 資料夾的路徑,然後選取 [下一步]Select the This package contains source files check box, enter the path to the SRS v2 - Configure SRS Setup folder, and then select Next.

  3. 選取 [ 不建立程式],然後選取 [下一步]Select Do not create a program, and then select Next.

  4. 查看 [ 確認設定 ] 頁面,然後選取 [下一步]Review the Confirm the settings page, and then select Next.

  5. 選取 [ 關閉]。Select Close.

發佈 Configuration Manager 套件Distribute Configuration Manager packages

所有套件都必須發佈到 Configuration Manager 階層中已指派發佈點角色的伺服器。All the packages must be distributed to the servers that have been assigned the distribution point role in the Configuration Manager hierarchy. 遵循下列指示來啟動套件發佈。Follow the instructions below to initiate package distribution.

  1. 發佈軟體套件。Distribute software packages.

    1. 在 Configuration Manager 主控台中,移至 [ 軟體庫 > 應用程式管理 > 套件]。In the Configuration Manager console, go to Software Library > Application Management > Packages. 選取所有您要發佈的軟體套件,然後選取 [ 發佈內容]。Select all the software packages you want to distribute, and then select Distribute Content.

    2. 查看套件清單,然後選取 [下一步]Review the list of packages, and then select Next.

    3. 根據您的 Configuration Manager 階層) 到清單,然後選取 [下一步],以新增所有發佈點伺服器 (或發佈點群組。Add all the distribution point servers (or distribution point groups, depending on your Configuration Manager hierarchy) to the list, and then select Next.

    4. 選取 [下一步],然後選取 [ 關閉]。Select Next, and then select Close.

  2. 發佈驅動程式套件。Distribute driver packages.

    1. 在 Configuration Manager 主控台中,移至 軟體庫 > 作業系統 > 驅動程式套件In the Configuration Manager console, go to Software Library > Operating Systems > Driver Packages. 選取您要發佈的所有驅動程式套件,然後選取 [ 發佈內容]。Select all the driver packages you want to distribute, and then select Distribute Content.

    2. 查看套件清單,然後選取 [下一步]Review the list of packages, and then select Next.

    3. 根據您的 Configuration Manager 階層) 到清單,然後選取 [下一步],以新增所有發佈點伺服器 (或發佈點群組。Add all the distribution point servers (or distribution point groups, depending on your Configuration Manager hierarchy) to the list, and then select Next.

    4. 選取 [下一步],然後選取 [ 關閉]。Select Next, and then select Close.

  3. 發佈作業系統封裝。Distribute operating system packages.

    1. 在 Configuration Manager 主控台中,移至 軟體庫 > 作業系統 的 > 作業系統影像In the Configuration Manager console, go to Software Library > Operating Systems > Operating System Images. 選取所有您想要散佈的作業系統影像,然後選取 [ 發佈內容]。Select all the operating system images you want to distribute, and then select Distribute Content.

    2. 查看套件清單,然後選取 [下一步]Review the list of packages, and then select Next.

    3. 根據您的 Configuration Manager 階層) 到清單,然後選取 [下一步],以新增所有發佈點伺服器 (或發佈點群組。Add all the distribution point servers (or distribution point groups, depending on your Configuration Manager hierarchy) to the list, and then select Next.

    4. 選取 [下一步],然後選取 [ 關閉]。Select Next, and then select Close.

注意

套件發佈可能需要一些時間,視套件大小、Configuration Manager 階層、發佈點伺服器數目,以及您網路中可用的頻寬而定。Package distribution might take some time, depending on the package size, Configuration Manager hierarchy, number of distribution point servers, and the bandwidth available in your network.

您必須先發佈所有套件,才能開始部署 Microsoft 團隊會議室。All the packages must be distributed before you can start deploying a Microsoft Teams Rooms unit.

您可以前往 監視 > 發佈狀態 > 內容狀態,在 Configuration Manager 主控台中查看套件發佈的狀態。You can review the status of your package distribution in the Configuration Manager console by going to Monitoring > Distribution Status > Content Status.

Configuration Manager 任務序列Configuration Manager task sequences

您可以將任務順序與 Configuration Manager 搭配使用,以自動將作業系統映射部署到目的地電腦的步驟。You use task sequences with Configuration Manager to automate the steps for deploying an operating system image to a destination computer. 若要以自動方式部署 Microsoft 團隊會議室,您可以建立一個參照啟動影像的任務序列,這些啟動影像是用來啟動目的地 Microsoft 團隊聊天室電腦、您想要安裝的 Windows 10 企業版作業系統影像,以及其他任何其他內容(例如其他應用程式或軟體更新)。To deploy a Microsoft Teams Rooms unit in an automated fashion, you create a task sequence that references the boot image used to start the destination Microsoft Teams Rooms computer, the Windows 10 Enterprise operating system image that you want to install, and any other additional content, such as other applications or software updates.

匯入範例任務序列Import the sample task sequence

您可以下載並輕鬆匯入範例任務序列,並加以自訂以符合您的需求。You can download and easily import a sample task sequence and customize it to meet your needs.

  1. 下載 範例任務序列,並將下載的 zip 檔案複製到共用位置。Download the sample task sequence, and copy the downloaded zip file to a shared location.

  2. 在 Configuration Manager 主控台中,移至 [ 軟體庫 > 作業系統] > 任務序列,然後選取 [匯 入任務序列]。In the Configuration Manager console, go to Software Library > Operating Systems > Task Sequences, and then select Import Task Sequence.

  3. 選取 [流覽],移至您在步驟1中使用的共用資料夾位置,選取 [ Microsoft 團隊聊天室] 部署 (en-us) .zip 檔案,然後選取 [下一步]Select Browse, go to the shared folder location you used in step 1, select the Microsoft Teams Rooms Deployment (EN-US).zip file, and then select Next.

  4. 動作 設定為 [ 新建],然後選取 [下一步]Set Action to Create New, and then select Next.

  5. 確認設定,然後選取 [下一步]Confirm the settings, and then select Next.

  6. 選取 [ 關閉]。Select Close.

驗證參照套件是否已正確連結至每個任務序列步驟。Validate that the reference packages are correctly linked to each task sequence step.

  1. 選取匯入的任務序列,然後選取 [ 編輯]。Select the imported task sequence, and then select Edit.

    [任務順序編輯器] 隨即開啟,並顯示您需要部署並設定 Microsoft 團隊會議室單位的每個順序步驟。The Task Sequence Editor opens and displays each sequential step that you need to deploy and configure a Microsoft Teams Rooms unit.

  2. 逐步執行每個步驟,並完成建議的更新:Walk through each step and complete the recommended updates:

    1. 在 WINDOWS PE 中重新開機:此步驟會重新開機,然後將電腦引導至 Windows PXE。Restart in Windows PE: This step restarts and then boots the computer into Windows PXE. 此步驟不需要任何變更。No changes are required for this step.

    2. [分區磁片0– UEFI]:此步驟會根據設定的設定,來擦除磁片設定並建立分區。Partition Disk 0 – UEFI: This step wipes the disk configuration and creates partitions based on the configured settings. 我們建議您不要對此步驟進行任何變更。We recommend that you not make any changes to this step.

    3. 設定 SRS 電腦名稱:此步驟包含一個 HTML 應用程式,可在部署期間提供 UI 來設定 Microsoft 團隊會議室單位的電腦名稱稱。Set SRS Computer Name: This step includes an HTML application to provide a UI to set a computer name for the Microsoft Teams Rooms unit during the deployment.

      • 這是一個選用的步驟,但只有在您想要透過備用程式管理電腦命名時,才能停用。This is an optional step, but it can only be disabled if you want to manage computer naming through an alternate process.
      • 確認已選取 [ SRS v2-Set-SRSComputerName 套件]。Verify that the SRS v2 - Set-SRSComputerName package is selected. 如果沒有,請流覽到套件並選取。If it isn't, browse to the package and select it.
    4. 套用 作業系統:此步驟指定要部署的作業系統映射,以及要使用的無人參與 Sysprep 答案檔案。Apply Operating System: This step specifies the operating system image to be deployed and the unattended Sysprep answer file to use.

      • 確認已選取正確的 Windows 10 企業版作業系統影像檔案。Verify that the correct Windows 10 Enterprise operating system image file is selected.
      • 確認已啟用 [ 針對自訂安裝使用無人參與或 Sysprep 答案 檔案],並且已選取 [ SRS V2-Sysprep 套件 ]。Verify that Use an unattended or Sysprep answer file for a custom installation is enabled, and the SRS v2 - Sysprep Package is selected. 另請確認 [檔案名] 已設定 為 [ unattend.xml]。Also ensure that File Name is set to unattend.xml.
    5. 套用 Windows 設定:此步驟會收集 Windows 安裝的相關資訊。Apply Windows Settings: This step gathers information about the Windows installation.

      • 視您的) 需求而定,提供授權及註冊資訊,包括產品金鑰、當地系統管理員帳戶密碼和時區 (。Provide licensing and registration information including the product key, local administrator account password, and time zone (depending on your needs).
    6. [套用 網路設定]:此步驟可讓您指定 [工作組] 或 [Active Directory 功能變數名稱] 和 [組織單位]。Apply Network Settings: This step allows you to specify a workgroup or Active Directory domain name and organizational unit.

      注意

      請參閱 Skype 會議室系統網域加入考慮 在將 Microsoft 團隊會議室部署為 Actve Directory 網域的成員時所需採取的建議動作。See Skype Room System domain joining considerations for recommended actions you need to take in deploying Microsoft Teams Rooms units as members of an Actve Directory domain.

    7. 套用 驅動程式: 這個步驟及其子步驟是根據您所擁有的 Surface Pro 模型來部署適用的裝置驅動程式和固件。Apply Drivers: This step and its sub-steps are used to deploy applicable device drivers and firmware based on the Surface Pro model you have. 更新每個步驟,以指定與此部署相關聯的相關驅動程式套件。Update each step to specify the relevant driver package associated with this deployment.

      • 每個驅動程式套件都設定為利用 Windows 管理工具 (WMI) 篩選器,以根據 Surface Pro 品牌和型號部署相關的驅動程式和固件。Each driver package is configured to leverage Windows Management Instrumentation (WMI) filters to deploy relevant drivers and firmware based on the Surface Pro make and model.
      • 我們強烈建議您不要變更這些驅動程式的設定,否則部署可能會失敗。We highly recommend that you not alter the configuration of these drivers, otherwise deployment might fail.
    8. 設定 Windows 與 Configuration manager:此步驟會部署並設定 configuration manager 用戶端。Set up Windows and Configuration Manager: This step deploys and configures the Configuration Manager client. 更新此步驟以指定內建 Configuration Manager 用戶端套件。Update this step to specify the built-in Configuration Manager Client Package.

    9. 安裝根憑證:此步驟會為非網域加入的裝置發佈根憑證,因此預設為選用並停用。Install Root Certificate: This step distributes the root certificate for non–domain-joined devices, and therefore is optional and disabled by default.

      • 如果您需要將根憑證部署到 Microsoft 團隊會議室單位,請啟用此步驟。Enable this step if you need to deploy a root certificate to the Microsoft Teams Rooms units.
      • 如果您需要執行此步驟,請確認已選取 [ SRS v2 –根憑證套件 ] 和 [ 停用64位檔案系統 重新導向]。If you do need to perform this step, verify that the SRS v2 – Root Certificate Package and Disable 64-bit file system redirection are selected.
    10. 安裝並設定監視代理程式:此步驟會安裝64位版本的 Microsoft Azure 監視器代理,並將代理程式設定為連線到您的 Log Analytics 工作區。Install and Configure Monitoring Agent: This step installs the 64-bit version of the Microsoft Azure Monitor agent and configures the agent to connect to your Log Analytics workspace.

    11. 複製 SRS V2 設定檔:此步驟會將所需的設定和配置檔案從 Microsoft 團隊聊天室部署套件複製到本機硬碟。Copy SRS v2 Configuration Files: This step copies the required setup and configuration files from the Microsoft Teams Rooms deployment kit to the local hard drive. 此步驟不需要自訂。No customization is required for this step.

      • 確認已選取 [ srs v2 – srs] 應用程式套件 和 [ 停用64位檔案系統 重新導向]。Verify that the SRS v2 – SRS Application Package and Disable 64-bit file system redirection are selected.
    12. 安裝-SRSv2-OS-更新:此步驟會將 Microsoft 小組聊天室部署所需的任何強制作業系統更新部署。Install-SRSv2-OS-Updates: This step deploys any mandatory operating system updates required with the Microsoft Teams Rooms deployment. 請執行下列動作:Do the following:

      • 檢查 [設定 Microsoft 團隊聊天室] 主控台 ,查看需要哪些更新。Check Configure a Microsoft Teams Rooms console to see which updates are required.
      • 確認您的 SRS v2-OS 更新套件 包含所有需要的更新。Verify that your SRS v2 – OS Updates Package includes all the required updates.
      • 確認已選取 [ SRS v2-OS 更新套件 ]。Verify that the SRS v2 – OS Updates Package is selected.
      • 確認 [PowerShell 執行原則] 設定為 [ 略過]。Verify that the PowerShell execution policy is set to Bypass.
    13. 重新開機電腦:此步驟會在安裝必要的作業系統更新之後,重新開機電腦。Restart Computer: This step reboots the computer after the mandatory operating system updates are installed. 此步驟不需要自訂。No customization is required for this step.

    14. 設定 Windows 元件:此步驟會配置必要的 Windows 功能。Configure Windows Components: This step configures the required Windows features. 此步驟不需要自訂。No customization is required for this step.

    15. 重新開機電腦:此步驟會在設定 Windows 功能之後重新開機電腦。Restart Computer: This step reboots the computer after the Windows features are configured. 此步驟不需要自訂。No customization is required for this step.

    16. 新增本機 Skype 使用者:此步驟會建立用來自動登入 Windows 的本機 skype 帳戶,並啟動 Microsoft 團隊聊天室應用程式。Add Local Skype User: This step creates the local Skype account used to automatically sign in to Windows and start the Microsoft Teams Rooms application. 這個步驟沒有任何與它相關聯的軟體套件,且不需要進行自訂。This step doesn't have any software package associated with it, and no customization is required for it.

    17. 設定和設定 SRS 應用程式:此步驟會針對下次啟動作業系統,為 Microsoft 團隊聊天室應用程式安裝進行配置。Set up and configure SRS application: This step configures the Microsoft Teams Rooms application installation for the next boot of the operating system.

      • 確認已選取 [ srs v2]-[設定 Srs 安裝套件 ] 和 [ 停用64位檔案系統 重新導向]。Verify that the SRS v2 – Configure SRS Setup Package and Disable 64-bit file system redirection are selected.

重要

任務序列步驟必須遵循所提供的順序,這一點非常重要。It is very important that the task sequence steps must be in the provided order. 修改步驟順序或設定其他步驟可能會中斷部署。Modifying the order of steps, or configuring additional steps might break the deployment.

設定和設定 SRS 應用程式 步驟必須是任務序列中的最後一個步驟,否則部署可能會失敗。Set up and configure SRS application step must be the last step in the task sequence, otherwise the deployment might fail.

建立任務序列的部署Create deployment for the task sequence

  1. 選取任務序列,然後選取 [ 部署]。Select the task sequence, and then select Deploy.

  2. 選取 [流覽] 以選取要部署的 [目標集合]。Select Browse to select target collection for deployment.

  3. 選取 [ 所有未知電腦 ],然後選取 [確定]Select All Unknown Computers and then select OK.

  4. 選取 [下一步]Select Next.

  5. 選取 [在 用途] 下拉式清單中的 [可用]。Select Available on the Purpose drop down list.

  6. 在 [可用至下列 清單] 中,選取 [僅限媒體和 PXE ],然後選取 [下一步]Select Only Media and PXE in the Make available to the following list, and then select Next.

    警告

    將 [ 目的 ] 設定為 [ 可用] 非常重要。It is very important that Purpose is set to Available. 確定 用途****未設定為[必要]。Make sure that the Purpose is NOT set to Required. 此外,請務必在 [可供下列] 中選取 [僅限媒體和 PXE ]。Also make sure that you select Only Media and PXE in the Make available to the following.

    如果將這些值設定為其他值,可能會導致所有電腦在啟動時取得 Microsoft 團隊會議室部署影像。Setting these values to something else might cause all computers to get the Microsoft Teams Rooms deployment image when booted.

  7. 請勿指定任何排程,然後選取 [下一步]Do not specify any schedule and select Next.

  8. 請勿變更 [ 使用者體驗 ] 區段中的任何專案,然後選取 [下一步]Do not change anything within the User Experience section and select Next.

  9. 請勿變更 [ 通知 ] 區段中的任何專案,然後選取 [下一步]Do not change anything within the Alerts section and select Next.

  10. 請勿變更 [ 發佈點 ] 區段中的任何專案,然後選取 [下一步]Do not change anything within the Distribution Points section and select Next.

  11. 確認設定,然後選取 [下一步]Confirm the settings and then select Next.

  12. 選取 [ 關閉]。Select Close.

驗證及疑難排解解決方案Validate and troubleshoot the solution

完成 Microsoft 端點設定管理員的工作序列之後,您必須執行測試執行,以驗證任務序列是否可部署並設定 Microsoft 團隊會議室單位。After you've completed the Microsoft Endpoint Configuration Manager task sequences, you'll need to perform a test run to validate that the task sequence can deploy and configure Microsoft Teams Rooms units.

  1. 使用其中一個支援的乙太網配接器或使用 Surface dock,將測試裝置連線到有線網路。Connect the test device to the wired network by using one of the supported Ethernet adapters or using the Surface dock. 如果尚未針對您的環境設定 PXE 啟動功能,您可以使用 您先前建立 的 usb 快閃記憶體磁碟機上的啟動影像,然後連線至 Configuration Manager。If PXE boot functionality hasn't been configured for your environment, you can use the boot image on the USB flash drive that you created earlier to boot from USB and connect to Configuration Manager.

  2. 存取固件並啟動 PXE 啟動:Access the firmware and initiate PXE boot:

    1. 確認 Surface 裝置已關閉電源。Ensure the Surface device is powered off.

    2. 按住 音量 按鈕。Press and hold the Volume Up button.

    3. 按下並放開 [ 電源 ] 按鈕。Press and release the Power button.

    4. 在裝置開始啟動之後,請放開 Volume 按鈕。After the device begins to boot, release the Volume Up button.

    5. 選取 [ 啟動配置]。Select Boot configuration.

    6. 執行下列其中一項動作:Do one of the following:

      • 選取 [ PXE 引導],然後將它拖曳到清單頂端。Select PXE boot, and drag it to the top of the list. 或者,您可以在網路介面卡上向左滑動,立即引導至裝置。Alternatively, you can swipe left on the network adapter to boot to the device immediately. 這不會影響啟動順序。This won't affect the boot order.
      • 選取裝有啟動媒體的 USB 快閃記憶體磁片磁碟機。Select the USB flash drive that holds the boot media.
  3. 選取 [結束 ],然後選取 [****立即重新開機]。Select Exit, and then select Restart Now.

  4. 出現提示時,請選取 [針對網路引導服務 輸入 ]。When prompted, select Enter for network boot service.

  5. Windows PE 會載入到記憶體中,任務序列嚮導將會啟動。Windows PE will load into memory, and the Task Sequence Wizard will start. 選取 [下一步] 繼續。Select Next to continue.

  6. 選取您先前匯入的任務序列,然後選取 [下一步]Select the task sequence that you imported earlier, and then select Next.

  7. 在應用磁片設定之後,系統會提示您指定裝置的電腦名稱稱。After the disk configuration is applied, you'll be prompted to specify a computer name for the device. 使用者介面會根據 Surface Pro 裝置的序列值,顯示建議的電腦名稱稱。The user interface will display a recommended computer name based on the serial number of the Surface Pro device. 您要麼接受建議的名稱,要麼指定一個新的名稱。You can either accept the proposed name or specify a new one. 依照 [電腦名稱稱指派] 畫面上的指示進行。Follow the instructions on the computer name assignment screen. 當您選取 [ 接受] 時,就會開始部署。When you select Accept, the deployment begins.

  8. 部署程式的其餘部分是自動操作,不會要求您提供任何其他的使用者輸入。The rest of the deployment process is automatic and doesn't ask for any more user input.

  9. 部署工作序列完成設定裝置之後,您會看到下列配置畫面,要求您設定 Microsoft 團隊聊天室應用程式設定。After the deployment task sequence finishes configuring the device, you'll see the following configuration screen that asks you to configure the Microsoft Teams Rooms application settings.

    Microsoft 團隊聊天室應用程式的初始設定畫面

  10. 將 Surface Pro 插入 Microsoft 團隊聊天室主控台,然後設定應用程式設定。Plug the Surface Pro into the Microsoft Teams Rooms console, and configure the application settings.

  11. 驗證 Microsoft 團隊聊天室 中所列的功能是否可協助您在已部署的裝置上運作。Validate that the capabilities listed in Microsoft Teams Rooms help are working on the deployed device.

若要排查失敗的安裝問題,請檢查 SMSTS 檔案,該檔案會記錄 Configuration Manager 工作序列中執行的所有步驟。To troubleshoot a failed installation, check the SMSTS.log file, which logs all the steps executed in a Configuration Manager task sequence.

SMSTS 檔案會根據組建程式的階段,儲存在其中一個路徑上。The SMSTS.log file is stored on one of a number of paths, depending on the stage of the build process. 檢查下表,找出 SMSTS 檔案的路徑。Check the following table to identify the path to the SMSTS.log file.

部署階段Deployment phase 任務序列記錄路徑Task sequence log path
WinPE,在 HDD 格式之前WinPE, before HDD format X: \ Windows \ Temp \ smstslog \ smstsX:\Windows\Temp\smstslog\smsts.log
WinPE,在 HDD 格式化之後WinPE, after HDD format C: \ _SMSTaskSequence \ 記錄 \ Smstslog \ smstsC:\_SMSTaskSequence\Logs\Smstslog\smsts.log
在安裝 Configuration Manager 代理程式之前部署的作業系統Operating system deployed, before the Configuration Manager agent was installed c: \ _SMSTaskSequence \ 記錄 \ Smstslog \ smstsc:\_SMSTaskSequence\Logs\Smstslog\smsts.log
已部署的作業系統與 Configuration Manager 代理Operating system and the Configuration Manager agent deployed % windir% \ System32 \ ccm \ 記錄 \ Smstslog \ smsts%windir%\System32\ccm\logs\Smstslog\smsts.log
任務循序執行完成Task sequence execution complete % windir% \ System32 \ ccm \ 記錄 \ smsts 記錄%windir%\System32\ccm\logs\smsts.log

提示

您可以在任務序列期間隨時選取 F8 ,以開啟命令主控台,然後取得 SMSTS 檔案的存取權。You can select F8 at any time during the task sequence to open a command console, and then get access to the SMSTS.log file.

若要疑難排解 PXE 啟動問題,請檢查 Configuration Manager 伺服器上特定于 PXE 動作的兩個記錄檔:To troubleshoot PXE boot issues, check the two log files on the Configuration Manager server that are specific to PXE actions:

  • Pxecontrol 記錄,位於 Configuration Manager 安裝記錄目錄中Pxecontrol.log, located in the Configuration Manager installation logs directory

  • 在 Configuration Manager 管理點 (MP) 記錄目錄中的 [Smspxe] (記錄Smspxe.log, located in Configuration Manager Management Point (MP) logs directory

如需可用來進一步疑難排解 Configuration Manager 安裝的記錄檔案完整清單,請參閱 Microsoft 端點 Configuration Manager 記錄檔參考For a complete list of the log files that you can use to further troubleshoot your Configuration Manager installation, see the Microsoft Endpoint Configuration Manager Log file reference.