New-AzRecoveryServicesAsrReplicationProtectedItem

模組:

Az.RecoveryServices

藉由建立複寫保護的專案，啟用 ASR 可保護項目的複寫。

Syntax

New-AzRecoveryServicesAsrReplicationProtectedItem
   [-VmmToVmm]
   -ProtectableItem <ASRProtectableItem>
   -Name <String>
   -ProtectionContainerMapping <ASRProtectionContainerMapping>
    [-WaitForCompletion]
   [-DefaultProfile <IAzureContextContainer>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

New-AzRecoveryServicesAsrReplicationProtectedItem
   [-VMwareToAzure]
   -ProtectableItem <ASRProtectableItem>
   -Name <String>
   [-RecoveryVmName <String>]
   -ProtectionContainerMapping <ASRProtectionContainerMapping>
   -Account <ASRRunAsAccount>
   [-LogStorageAccountId <String>]
   -ProcessServer <ASRProcessServer>
   [-RecoveryAzureNetworkId <String>]
   [-RecoveryAzureSubnetName <String>]
   -RecoveryResourceGroupId <String>
   [-ReplicationGroupName <String>]
   [-RecoveryAvailabilityZone <String>]
   [-RecoveryProximityPlacementGroupId <String>]
   [-RecoveryAvailabilitySetId <String>]
   [-Size <String>]
   [-SqlServerLicenseType <String>]
   [-RecoveryVmTag <System.Collections.Generic.IDictionary`2[System.String,System.String]>]
   [-DiskTag <System.Collections.Generic.IDictionary`2[System.String,System.String]>]
   [-RecoveryNicTag <System.Collections.Generic.IDictionary`2[System.String,System.String]>]
   [-WaitForCompletion]
   -DiskType <String>
   [-DiskEncryptionSetId <String>]
   [-DefaultProfile <IAzureContextContainer>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

New-AzRecoveryServicesAsrReplicationProtectedItem
   [-VMwareToAzure]
   -ProtectableItem <ASRProtectableItem>
   -Name <String>
   [-RecoveryVmName <String>]
   -ProtectionContainerMapping <ASRProtectionContainerMapping>
   -Account <ASRRunAsAccount>
   [-LogStorageAccountId <String>]
   [-InMageAzureV2DiskInput <AsrInMageAzureV2DiskInput[]>]
   -ProcessServer <ASRProcessServer>
   [-RecoveryAzureNetworkId <String>]
   [-RecoveryAzureSubnetName <String>]
   -RecoveryResourceGroupId <String>
   [-ReplicationGroupName <String>]
   [-RecoveryAvailabilityZone <String>]
   [-RecoveryProximityPlacementGroupId <String>]
   [-RecoveryAvailabilitySetId <String>]
   [-Size <String>]
   [-SqlServerLicenseType <String>]
   [-RecoveryVmTag <System.Collections.Generic.IDictionary`2[System.String,System.String]>]
   [-DiskTag <System.Collections.Generic.IDictionary`2[System.String,System.String]>]
   [-RecoveryNicTag <System.Collections.Generic.IDictionary`2[System.String,System.String]>]
   [-WaitForCompletion]
   [-DiskEncryptionSetId <String>]
   [-DefaultProfile <IAzureContextContainer>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

New-AzRecoveryServicesAsrReplicationProtectedItem
   [-HyperVToAzure]
   -ProtectableItem <ASRProtectableItem>
   -Name <String>
   [-RecoveryVmName <String>]
   -ProtectionContainerMapping <ASRProtectionContainerMapping>
   -RecoveryAzureStorageAccountId <String>
   -RecoveryResourceGroupId <String>
   [-UseManagedDisk <String>]
   [-UseManagedDisksForReplication <String>]
   [-WaitForCompletion]
   [-DefaultProfile <IAzureContextContainer>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

New-AzRecoveryServicesAsrReplicationProtectedItem
   [-HyperVToAzure]
   -ProtectableItem <ASRProtectableItem>
   -Name <String>
   [-RecoveryVmName <String>]
   -ProtectionContainerMapping <ASRProtectionContainerMapping>
   -RecoveryAzureStorageAccountId <String>
   -OSDiskName <String>
   -OS <String>
   [-LogStorageAccountId <String>]
   [-IncludeDiskId <String[]>]
   [-RecoveryAzureNetworkId <String>]
   [-RecoveryAzureSubnetName <String>]
   -RecoveryResourceGroupId <String>
   [-RecoveryAvailabilityZone <String>]
   [-RecoveryProximityPlacementGroupId <String>]
   [-RecoveryAvailabilitySetId <String>]
   [-Size <String>]
   [-SqlServerLicenseType <String>]
   [-RecoveryVmTag <System.Collections.Generic.IDictionary`2[System.String,System.String]>]
   [-DiskTag <System.Collections.Generic.IDictionary`2[System.String,System.String]>]
   [-RecoveryNicTag <System.Collections.Generic.IDictionary`2[System.String,System.String]>]
   [-UseManagedDisk <String>]
   [-UseManagedDisksForReplication <String>]
   [-WaitForCompletion]
   [-DefaultProfile <IAzureContextContainer>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

New-AzRecoveryServicesAsrReplicationProtectedItem
   [-AzureToAzure]
   -AzureToAzureDiskReplicationConfiguration <ASRAzuretoAzureDiskReplicationConfig[]>
   -AzureVmId <String>
   -Name <String>
   [-RecoveryVmName <String>]
   -ProtectionContainerMapping <ASRProtectionContainerMapping>
   [-RecoveryAzureNetworkId <String>]
   [-RecoveryAzureSubnetName <String>]
   -RecoveryResourceGroupId <String>
   [-ReplicationGroupName <String>]
   [-RecoveryCloudServiceId <String>]
   [-RecoveryAvailabilityZone <String>]
   [-RecoveryProximityPlacementGroupId <String>]
   [-RecoveryVirtualMachineScaleSetId <String>]
   [-RecoveryCapacityReservationGroupId <String>]
   [-RecoveryAvailabilitySetId <String>]
   [-RecoveryBootDiagStorageAccountId <String>]
   [-DiskEncryptionVaultId <String>]
   [-DiskEncryptionSecretUrl <String>]
   [-KeyEncryptionKeyUrl <String>]
   [-KeyEncryptionVaultId <String>]
   [-WaitForCompletion]
   [-DefaultProfile <IAzureContextContainer>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

New-AzRecoveryServicesAsrReplicationProtectedItem
   [-AzureToAzure]
   -AzureVmId <String>
   -Name <String>
   [-RecoveryVmName <String>]
   -ProtectionContainerMapping <ASRProtectionContainerMapping>
   [-RecoveryAzureStorageAccountId <String>]
   -LogStorageAccountId <String>
   [-RecoveryAzureNetworkId <String>]
   [-RecoveryAzureSubnetName <String>]
   -RecoveryResourceGroupId <String>
   [-ReplicationGroupName <String>]
   [-RecoveryAvailabilityZone <String>]
   [-RecoveryProximityPlacementGroupId <String>]
   [-RecoveryVirtualMachineScaleSetId <String>]
   [-RecoveryCapacityReservationGroupId <String>]
   [-RecoveryAvailabilitySetId <String>]
   [-RecoveryBootDiagStorageAccountId <String>]
   [-DiskEncryptionVaultId <String>]
   [-DiskEncryptionSecretUrl <String>]
   [-KeyEncryptionKeyUrl <String>]
   [-KeyEncryptionVaultId <String>]
   [-WaitForCompletion]
   [-DefaultProfile <IAzureContextContainer>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

New-AzRecoveryServicesAsrReplicationProtectedItem
   [-ReplicateVMwareToAzure]
   -ProtectableItem <ASRProtectableItem>
   -Name <String>
   [-RecoveryVmName <String>]
   [-LicenseType <String>]
   [-TestNetworkId <String>]
   [-TestSubnetName <String>]
   -ProtectionContainerMapping <ASRProtectionContainerMapping>
   [-CredentialsToAccessVm <String>]
   -LogStorageAccountId <String>
   -ApplianceName <String>
   -Fabric <ASRFabric>
   [-RecoveryAzureNetworkId <String>]
   [-RecoveryAzureSubnetName <String>]
   -RecoveryResourceGroupId <String>
   [-ReplicationGroupName <String>]
   [-RecoveryAvailabilityZone <String>]
   [-RecoveryProximityPlacementGroupId <String>]
   [-RecoveryAvailabilitySetId <String>]
   [-Size <String>]
    [-RecoveryBootDiagStorageAccountId <String>]
   [-WaitForCompletion]
   -DiskType <String>
   [-DiskEncryptionSetId <String>]
   [-DefaultProfile <IAzureContextContainer>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

New-AzRecoveryServicesAsrReplicationProtectedItem
   [-ReplicateVMwareToAzure]
   -ProtectableItem <ASRProtectableItem>
   -InMageRcmDiskInput <ASRInMageRcmDiskInput[]>
   -Name <String>
   [-RecoveryVmName <String>]
   [-LicenseType <String>]
   [-TestNetworkId <String>]
   [-TestSubnetName <String>]
   -ProtectionContainerMapping <ASRProtectionContainerMapping>
   [-CredentialsToAccessVm <String>]
   -ApplianceName <String>
   -Fabric <ASRFabric>
   [-RecoveryAzureNetworkId <String>]
   [-RecoveryAzureSubnetName <String>]
   -RecoveryResourceGroupId <String>
   [-ReplicationGroupName <String>]
   [-RecoveryAvailabilityZone <String>]
   [-RecoveryProximityPlacementGroupId <String>]
   [-RecoveryAvailabilitySetId <String>]
   [-Size <String>]
   [-RecoveryBootDiagStorageAccountId <String>]
   [-WaitForCompletion]
   [-DefaultProfile <IAzureContextContainer>]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

New-AzRecoveryServicesAsrReplicationProtectedItem Cmdlet 會建立新的復寫保護專案。 使用此 Cmdlet 來啟用 ASR 可保護項目的複寫。

範例

範例 1

$currentJob = New-AzRecoveryServicesAsrReplicationProtectedItem -ProtectableItem $VM -Name $VM.Name -ProtectionContainerMapping $ProtectionContainerMapping

啟動指定 ASR 可保護項目的復寫受保護專案建立作業，並傳回用來追蹤作業的 ASR 作業。

範例 2

$job = New-AzRecoveryServicesAsrReplicationProtectedItem -VMwareToAzure -Account $fabric.FabricSpecificDetails.RunAsAccounts[0] `
-RecoveryResourceGroupId $RecoveryResourceGroupId -RecoveryAzureNetworkId $RecoveryAzureNetworkId  -name $name `
-ProcessServer $fabric.FabricSpecificDetails.ProcessServers[0] -ProtectableItem $protectableItem -ProtectionContainerMapping $pcm `
-RecoveryAzureSubnetName $RecoveryAzureSubnetName -RecoveryVmName $RecoveryVmName -LogStorageAccountId $LogStorageAccountId

啟動指定 ASR 可保護項目的復寫受保護專案建立作業，並傳回用來追蹤作業的 ASR 作業（vmWare 至 Azure 案例）。

範例 3

$job = New-AzRecoveryServicesAsrReplicationProtectedItem -AzureToAzure -AzureToAzureDiskReplicationConfiguration disk1,disk2 -AzureVmId $vmId `
-Name "a2aprotectedItem" -ProtectionContainerMapping $pcmMapping -RecoveryResourceGroupId $recoveryResourceGroup

啟動指定 ASR 可保護項目的復寫受保護專案建立作業，並傳回用來追蹤作業的 ASR 作業（Azure 至 Azure 案例）。

範例 4

$disk1 = New-AzRecoveryServicesAsrAzureToAzureDiskReplicationConfig -vhdUri  $diskUri1 -RecoveryAzureStorageAccountId $recoveryAzureStorageAccountId `
-LogStorageAccountId $logStorageAccountId  
$disk2 = New-AzRecoveryServicesAsrAzureToAzureDiskReplicationConfig -vhdUri  $diskUri2 -RecoveryAzureStorageAccountId $recoveryAzureStorageAccountId `
-LogStorageAccountId $logStorageAccountId  
$enableDRjob = New-AzRecoveryServicesAsrReplicationProtectedItem -AzureToAzure -AzureVmId $vmId -Name $rpiName `
-RecoveryCloudServiceId  $recoveryCloudServiceId -ProtectionContainerMapping $pcm -RecoveryResourceGroupId  $RecoveryResourceGroupId `
-AzureToAzureDiskReplicationConfiguration $disk1,$disk2 -RecoveryAzureNetworkId $RecoveryAzureNetworkId -RecoveryAzureSubnetName $RecoveryAzureSubnetName

啟動指定 VmId 的復寫受保護專案建立作業，並傳回用來追蹤作業的 ASR 作業（Azure 至 Azure 案例）。

範例 5

$disk1 = New-AzRecoveryServicesAsrInMageAzureV2DiskInput -DiskId $diskId -LogStorageAccountId $logStorageAccountId -DiskType $diskType
$disk2 = New-AzRecoveryServicesAsrInMageAzureV2DiskInput -DiskId $diskId2 -LogStorageAccountId $logStorageAccountId -DiskType $diskType2
$job = New-AzRecoveryServicesAsrReplicationProtectedItem -VMwareToAzure -Account $fabric.FabricSpecificDetails.RunAsAccounts[0] -RecoveryResourceGroupId $RecoveryResourceGroupId `
-RecoveryAzureNetworkId $RecoveryAzureNetworkId  -name $name -ProcessServer $fabric.FabricSpecificDetails.ProcessServers[0] -ProtectableItem $protectableItem  `
-ProtectionContainerMapping $pcm -RecoveryAzureSubnetName $RecoveryAzureSubnetName -RecoveryVmName $RecoveryVmName `
-LogStorageAccountId $LogStorageAccountId -InMageAzureV2DiskInput $disk1,$disk2

針對指定的 ASR 可保護專案啟動複寫保護專案建立作業，包括選擇性磁碟，並傳回 ASR 作業，以使用選取的磁碟追蹤作業（vmWare 至 Azure 案例）。

範例 6

$job = New-AzRecoveryServicesAsrReplicationProtectedItem -VMwareToAzure -Account $fabric.FabricSpecificDetails.RunAsAccounts[0] -RecoveryResourceGroupId $RecoveryResourceGroupId `
-RecoveryAzureNetworkId $RecoveryAzureNetworkId  -name $name -ProcessServer $fabric.FabricSpecificDetails.ProcessServers[0] -ProtectableItem $protectableItem  `
-ProtectionContainerMapping $pcm -RecoveryAzureSubnetName $RecoveryAzureSubnetName -RecoveryVmName $RecoveryVmName `
-LogStorageAccountId $LogStorageAccountId -DiskType Standard_LRS

針對具有預設磁碟類型的指定 ASR 可保護專案啟動復寫保護專案建立作業，並傳回用來追蹤作業的 ASR 作業（vmWare 至 Azure 案例）。

範例 7

$disk1 = New-AzRecoveryServicesAsrAzureToAzureDiskReplicationConfig -vhdUri  $diskUri1 -RecoveryAzureStorageAccountId $recoveryAzureStorageAccountId -LogStorageAccountId $logStorageAccountId  
$disk2 = New-AzRecoveryServicesAsrAzureToAzureDiskReplicationConfig -vhdUri  $diskUri2 -RecoveryAzureStorageAccountId $recoveryAzureStorageAccountId -LogStorageAccountId $logStorageAccountId  
$enableDRjob = New-AzRecoveryServicesAsrReplicationProtectedItem -AzureToAzure -AzureVmId $vmId -Name $rpiName `
-RecoveryCloudServiceId  $recoveryCloudServiceId -ProtectionContainerMapping $pcm -RecoveryResourceGroupId  $RecoveryResourceGroupId `
-AzureToAzureDiskReplicationConfiguration $disk1,$disk2 -DiskEncryptionVaultId  $DiskEncryptionVaultId -DiskEncryptionSecretUrl $DiskEncryptionSecertUrl `
 -KeyEncryptionVaultId $KeyEncryptionVaultId  -KeyEncryptionKeyUrl $KeyEncryptionKeyUrl

啟動指定 VmId 的復寫受保護專案建立作業，並傳回用來追蹤作業的 ASR 作業（Azure 至 Azure 案例）。針對傳入 Cmdlet 進行加密的故障轉移 VM 詳細資料，將會使用 。

範例 8

$job = New-AzRecoveryServicesAsrReplicationProtectedItem -AzureToAzure -AzureToAzureDiskReplicationConfiguration disk1,disk2 -AzureVmId $vmId `
-Name "a2aprotectedItem" -ProtectionContainerMapping $pcmMapping -RecoveryResourceGroupId $recoveryResourceGroup -RecoveryProximityPlacementGroupId $ppg

啟動鄰近放置群組內虛擬機的復寫受保護專案建立作業，並傳回用來追蹤作業的 ASR 作業（Azure 至 Azure 案例）。

範例 9

$job = New-AzRecoveryServicesAsrReplicationProtectedItem -AzureToAzure -AzureToAzureDiskReplicationConfiguration disk1,disk2 -AzureVmId $vmId `
-Name "a2aprotectedItem" -ProtectionContainerMapping $pcmMapping -RecoveryResourceGroupId $recoveryResourceGroup -RecoveryVirtualMachineScaleSetId $vmss

啟動已設定目標虛擬機擴展集的虛擬機複寫受保護專案建立作業，並傳回用來追蹤作業的 ASR 作業（Azure 至 Azure 案例）。

參數

-Account

執行身分帳戶，以視需要推送安裝 行動服務。 必須是 ASR 網狀架構中以帳戶身分執行清單中的帳戶。

Type:	ASRRunAsAccount
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-ApplianceName

指定要用來復寫此電腦的設備名稱。

Type:	String
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-AzureToAzure

Switch 參數會指定在 Azure 中建立複寫的專案至 Azure 案例。

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-AzureToAzureDiskReplicationConfiguration

指定用於 Azure 至 Azure 災害復原案例之 Vm 的磁碟組態。

Type:	ASRAzuretoAzureDiskReplicationConfig[]
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-AzureVmId

指定復原區域中災害復原保護的 Azure VM 識別碼。

Type:	String
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-Confirm

啟動作業之前，會提示您進行確認。

Type:	SwitchParameter
Aliases:	cf
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-CredentialsToAccessVm

指定要視需要在來源計算機上推送安裝 行動服務 的認證名稱。

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-DefaultProfile

用於與 Azure 通訊的認證、帳戶、租用戶和訂用帳戶。

Type:	IAzureContextContainer
Aliases:	AzContext, AzureRmContext, AzureCredential
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-DiskEncryptionSecretUrl

指定故障轉移後要用於復原 VM 的版本（Azure 磁碟加密）的磁碟加密秘密 URL。

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-DiskEncryptionSetId

指定磁碟加密集的資源標識碼，以用於受控磁碟的加密。

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-DiskEncryptionVaultId

指定故障轉移後要用於復原 VM 的磁碟加密秘密保存庫標識碼（Azure 磁碟加密）。

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-DiskTag

指定 VM 磁碟的標記。

Type:	IDictionary<TKey,TValue>[System.String,System.String]
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-DiskType

指定復原 VM 受控磁碟類型。

Type:	String
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-Fabric

指定 ASR Fabric 物件。

Type:	ASRFabric
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-HyperVToAzure

切換參數來指定複寫的項目是複寫至 Azure 的 Hyper-V 虛擬機。

Type:	SwitchParameter
Position:	0
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-IncludeDiskId

要包含用於復寫的磁碟清單。 預設會包含所有磁碟。

Type:	String[]
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-InMageAzureV2DiskInput

指定 vMWare 磁碟識別子的磁碟組態輸入，以防止指定的可保護專案。

Type:	AsrInMageAzureV2DiskInput[]
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-InMageRcmDiskInput

指定要用於 VMware 至 Azure 災害復原案例的磁碟輸入。

Type:	ASRInMageRcmDiskInput[]
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-KeyEncryptionKeyUrl

指定故障轉移後要用來復原 VM 之版本（Azure 磁碟加密）的磁碟加密密鑰 URL。

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-KeyEncryptionVaultId

指定要在故障轉移後用來復原 VM 的磁碟加密金鑰金鑰保存庫識別碼（Azure 磁碟加密）。

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-LicenseType

指定授權類型。 此參數可接受的值為：NoLicenseType 或 WindowsServer。

Type:	String
Accepted values:	NoLicenseType, WindowsServer
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-LogStorageAccountId

指定要用來儲存復寫記錄的記錄檔或快取記憶體帳戶標識碼。

Type:	String
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-Name

指定 ASR 複寫受保護項目的名稱。 名稱在保存庫內必須是唯一的。

Type:	String
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-OS

指定作業系統系列。 此參數可接受的值為：Windows 或Linux。

Type:	String
Accepted values:	Windows, Linux
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-OSDiskName

指定作業系統磁碟的名稱。

Type:	String
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-ProcessServer

用來復寫此機器的進程伺服器。 使用 ASR 網狀架構中對應至組態伺服器的進程伺服器清單來指定一個進程伺服器。

Type:	ASRProcessServer
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-ProtectableItem

指定啟用複寫的 ASR 可保護項目物件。

Type:	ASRProtectableItem
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	True
Accept wildcard characters:	False

-ProtectionContainerMapping

指定要用於復寫之複製策略的 ASR 保護容器對應物件。

Type:	ASRProtectionContainerMapping
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-RecoveryAvailabilitySetId

在故障轉移時，要復原機器之 AvailabilitySet 的標識碼。

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RecoveryAvailabilityZone

指定故障轉移之後的復原 VM 可用性區域。

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RecoveryAzureNetworkId

在故障轉移時，要復原機器的 Azure 虛擬網路識別碼。

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RecoveryAzureStorageAccountId

指定要復寫的 Azure 記憶體帳戶標識碼。

Type:	String
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-RecoveryAzureSubnetName

在故障轉移時，應該連結故障轉移虛擬機之復原 Azure 虛擬網路內的子網。

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RecoveryBootDiagStorageAccountId

指定用於復原 Azure VM 之開機診斷的記憶體帳戶。

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RecoveryCapacityReservationGroupId

指定目標復原區域中故障轉移 VM 要使用的容量保留群組識別碼。

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RecoveryCloudServiceId

指定要將此虛擬機故障轉移至的復原雲端服務資源標識碼。

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RecoveryExtendedLocation

指定 EZ 到 EZ 的 Recovery ExtendedLocation。

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RecoveryNicTag

指定 VM 目標 NIC 的標籤。

Type:	IDictionary<TKey,TValue>[System.String,System.String]
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RecoveryProximityPlacementGroupId

指定目標復原區域中故障轉移 Vm 所使用的鄰近放置群組標識碼。

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RecoveryResourceGroupId

指定將在故障轉移時建立虛擬機之資源群組的 ARM 識別碼。

Type:	String
Position:	Named
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-RecoveryVirtualMachineScaleSetId

指定目標復原區域中故障轉移 Vm 所使用的虛擬機擴展集標識碼。

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RecoveryVmName

故障轉移后建立的復原 VM 名稱。

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-RecoveryVmTag

指定目標 VM 的標籤。

Type:	IDictionary<TKey,TValue>[System.String,System.String]
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-ReplicateVMwareToAzure

切換參數來指定複寫的專案是複寫至 Azure 的 VMware 虛擬機。

Type:	SwitchParameter
Position:	0
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-ReplicationGroupName

指定要用來建立多 VM 一致恢復點的複寫組名。 根據預設，每個復寫保護的項目都會建立在自己的群組中，而且不會產生多 VM 一致的恢復點。 只有在您需要透過保護所有機器到相同的復寫群組，跨一組機器建立多 VM 一致的恢復點時，才使用此選項。

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-Size

指定復原虛擬機大小。

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-SqlServerLicenseType

指定 VM 的 SQL Server 授權類型。

Type:	String
Accepted values:	NoLicenseType, PAYG, AHUB
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-TestNetworkId

指定測試網路 ARM 識別碼。

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-TestSubnetName

指定測試網路子網名稱。

Type:	String
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-UseManagedDisk

指定在故障轉移上建立的 Azure 虛擬機是否應該使用受控磁碟。 它接受 True 或 False。

Type:	String
Accepted values:	True, False
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-UseManagedDisksForReplication

指定在復寫期間是否需要使用受控磁碟。 它接受 True 或 False。

Type:	String
Accepted values:	True, False
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-VmmToVmm

切換參數來指定複寫的專案是正在 VMM 受控 Hyper-V 網站之間復寫的 Hyper-V 虛擬機。

Type:	SwitchParameter
Position:	0
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-VMwareToAzure

切換參數來指定複寫的專案是將複寫至 Azure 的 VMware 虛擬機或實體伺服器。

Type:	SwitchParameter
Position:	0
Default value:	None
Required:	True
Accept pipeline input:	False
Accept wildcard characters:	False

-WaitForCompletion

指定 Cmdlet 應該在傳回之前等待作業完成。

Type:	SwitchParameter
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

-WhatIf

顯示執行 Cmdlet 後會發生的情況。 未執行 Cmdlet。

Type:	SwitchParameter
Aliases:	wi
Position:	Named
Default value:	None
Required:	False
Accept pipeline input:	False
Accept wildcard characters:	False

輸入

ASRProtectableItem

輸出

ASRJob

相關連結

• Get-AzRecoveryServicesAsrReplicationProtectedItem
• Remove-AzRecoveryServicesAsrReplicationProtectedItem
• Set-AzRecoveryServicesAsrReplicationProtectedItem